main
Ray
pj9193m25se: specified limits as data (metadata.characteristics, 11 rows from the datasheet)
3f375a5
PJ9193M25SE
PJSEMI · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23-5
PJ9193M25SE from PJSEMI, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Power input voltage. Operating range 2V to 6.5V (absolute max -0.3V to +7V). Bypass to GND with a 1µF ceramic capacitor placed as close as possible to the pin for stability and noise decoupling. |
| 2 | GND | power_in | Ground reference for the regulator. Return path for input and output capacitors; route with a wide, short copper trace back to this pin to minimize parasitic inductance/resistance. |
| 3 | EN | input | Chip Enable, active high. CMOS logic input: VIH ≥ 1.2V starts up the regulator, VIL ≤ 0.4V shuts it down. Leakage typ. 1µA. High impedance pin - cannot be left floating; may be tied to VIN to keep the part always on. |
| 4 | NC | unconnected | No internal connection. Leave floating or tie to GND/VIN as convenient for layout; not electrically bonded to the die. |
| 5 | VOUT | power_out | Regulated output voltage. Fixed 2.5V for the -25 option, up to 300mA (M current tap). Requires a minimum 1µF ceramic output capacitor (X5R/X7R) placed close to VOUT and GND for stability. Current limit typ. 450mA; short-circuit current typ. 50mA. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | PJSEMI |
| Package | SOT-23-5 |
| Category | PMIC |
| Pins | 5 |
Ordering variants
PJ9193M25SEPJ9193M25SESAPJ9193M25SESCPJ9193M25SESQ
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Voltage | VIN | -0.3 | 6.5 | V | 5 | ||
| Output Voltage Accuracy | ΔVOUT | -2 | 2 | % | IOUT=40mA | 5 | |
| Supply Voltage | 2 | 6.5 | V | 4 | |||
| Operating Free Air Temperature Range | TA | -40 | 85 | ℃ | 4 | ||
| Operating Junction Temperature Range | Tj | -40 | 125 | ℃ | 4 | ||
| Input Voltage | -0.3 | 7 | V | Ratings at 25℃ ambient | 4 | ||
| Output Voltage | -0.3 | V | Ratings at 25℃ ambient | 4 | |||
| Storage temperature range | -40 | 125 | ℃ | 4 | |||
| Maximum Junction Temperature | 260 | ℃ | 4 | ||||
| Power Dissipation (SOT-23-5) | 400 | mW | Ratings at 25℃ ambient; SOT-23-5 | 4 | |||
| Thermal Resistance, Junction-to-Ambient (SOT-23-5) | 250 | ℃/W | 4 |
CAD (KiCad official)
- Symbol:
PJ9193M25SE - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
pj9193m25se-etched.step/pj9193m25se-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pj9193m25se.step/pj9193m25se.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: PJSEMI datasheet (None pp, sha256
9a82ee51ef372c12, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# PJ9193M25SE
**PJSEMI** · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23-5
PJ9193M25SE from PJSEMI, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Power input voltage. Operating range 2V to 6.5V (absolute max -0.3V to +7V). Bypass to GND with a 1µF ceramic capacitor placed as close as possible to the pin for stability and noise decoupling. |
| 2 | GND | power_in | Ground reference for the regulator. Return path for input and output capacitors; route with a wide, short copper trace back to this pin to minimize parasitic inductance/resistance. |
| 3 | EN | input | Chip Enable, active high. CMOS logic input: VIH ≥ 1.2V starts up the regulator, VIL ≤ 0.4V shuts it down. Leakage typ. 1µA. High impedance pin - cannot be left floating; may be tied to VIN to keep the part always on. |
| 4 | NC | unconnected | No internal connection. Leave floating or tie to GND/VIN as convenient for layout; not electrically bonded to the die. |
| 5 | VOUT | power_out | Regulated output voltage. Fixed 2.5V for the -25 option, up to 300mA (M current tap). Requires a minimum 1µF ceramic output capacitor (X5R/X7R) placed close to VOUT and GND for stability. Current limit typ. 450mA; short-circuit current typ. 50mA. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | PJSEMI |
| Package | SOT-23-5 |
| Category | PMIC |
| Pins | 5 |
## Ordering variants
- `PJ9193M25SE`
- `PJ9193M25SESA`
- `PJ9193M25SESC`
- `PJ9193M25SESQ`
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Voltage | VIN | -0.3 | | 6.5 | V | | 5 |
| Output Voltage Accuracy | ΔVOUT | -2 | | 2 | % | IOUT=40mA | 5 |
| Supply Voltage | | 2 | | 6.5 | V | | 4 |
| Operating Free Air Temperature Range | TA | -40 | | 85 | ℃ | | 4 |
| Operating Junction Temperature Range | Tj | -40 | | 125 | ℃ | | 4 |
| Input Voltage | | -0.3 | | 7 | V | Ratings at 25℃ ambient | 4 |
| Output Voltage | | -0.3 | | | V | Ratings at 25℃ ambient | 4 |
| Storage temperature range | | -40 | | 125 | ℃ | | 4 |
| Maximum Junction Temperature | | | | 260 | ℃ | | 4 |
| Power Dissipation (SOT-23-5) | | | | 400 | mW | Ratings at 25℃ ambient; SOT-23-5 | 4 |
| Thermal Resistance, Junction-to-Ambient (SOT-23-5) | | | | 250 | ℃/W | | 4 |
## CAD (KiCad official)
- Symbol: `PJ9193M25SE`
- Footprint: `Package_TO_SOT_SMD:SOT-23-5`
- 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files: `pj9193m25se-etched.step` / `pj9193m25se-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `pj9193m25se.step` / `pj9193m25se.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [PJSEMI datasheet](docs/pj9193m25se-datasheet.pdf) (None pp, sha256 `9a82ee51ef372c12`, retrieved 2026-08-17, tier: lcsc)
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/pj9193m25se-datasheet.pdf)