main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs pj9193m25se: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers pj9193m25se: viewers · Ray
package.json Publish 0.1.2 · Ray
page.json Publish 0.1.2 · Ray
pj9193m25se-etched.fit.json pj9193m25se: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
pj9193m25se-etched.glb pj9193m25se: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC body… · Ray
pj9193m25se-etched.step pj9193m25se: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC body… · Ray
pj9193m25se-hero.glb Publish 0.1.1 · Ray
pj9193m25se-hero.overlay.json Publish 0.1.1 · Ray
pj9193m25se.glb Publish 0.1.0 · Ray
pj9193m25se.kicad_mod Publish 0.1.0 · Ray
pj9193m25se.kicad_sym Publish 0.1.0 · Ray
pj9193m25se.lbr Publish 0.1.0 · Ray
pj9193m25se.step Publish 0.1.0 · Ray
README.md pj9193m25se: specified limits as data (metadata.characteristics, 11 rows from the datasheet) · Ray

PJ9193M25SE

PJSEMI · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23-5

PJ9193M25SE from PJSEMI, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VIN power_in Power input voltage. Operating range 2V to 6.5V (absolute max -0.3V to +7V). Bypass to GND with a 1µF ceramic capacitor placed as close as possible to the pin for stability and noise decoupling.
2 GND power_in Ground reference for the regulator. Return path for input and output capacitors; route with a wide, short copper trace back to this pin to minimize parasitic inductance/resistance.
3 EN input Chip Enable, active high. CMOS logic input: VIH ≥ 1.2V starts up the regulator, VIL ≤ 0.4V shuts it down. Leakage typ. 1µA. High impedance pin - cannot be left floating; may be tied to VIN to keep the part always on.
4 NC unconnected No internal connection. Leave floating or tie to GND/VIN as convenient for layout; not electrically bonded to the die.
5 VOUT power_out Regulated output voltage. Fixed 2.5V for the -25 option, up to 300mA (M current tap). Requires a minimum 1µF ceramic output capacitor (X5R/X7R) placed close to VOUT and GND for stability. Current limit typ. 450mA; short-circuit current typ. 50mA.

Key specifications

Parameter Value
Manufacturer PJSEMI
Package SOT-23-5
Category PMIC
Pins 5

Ordering variants

  • PJ9193M25SE
  • PJ9193M25SESA
  • PJ9193M25SESC
  • PJ9193M25SESQ

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input Voltage VIN -0.3 6.5 V 5
Output Voltage Accuracy ΔVOUT -2 2 % IOUT=40mA 5
Supply Voltage 2 6.5 V 4
Operating Free Air Temperature Range TA -40 85 ℃ 4
Operating Junction Temperature Range Tj -40 125 ℃ 4
Input Voltage -0.3 7 V Ratings at 25℃ ambient 4
Output Voltage -0.3 V Ratings at 25℃ ambient 4
Storage temperature range -40 125 ℃ 4
Maximum Junction Temperature 260 ℃ 4
Power Dissipation (SOT-23-5) 400 mW Ratings at 25℃ ambient; SOT-23-5 4
Thermal Resistance, Junction-to-Ambient (SOT-23-5) 250 ℃/W 4

CAD (KiCad official)

  • Symbol: PJ9193M25SE
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5 (KiCad packages3D, STEP)
  • 3D model files: pj9193m25se-etched.step / pj9193m25se-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pj9193m25se.step / pj9193m25se.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: PJSEMI datasheet (None pp, sha256 9a82ee51ef372c12, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF