main
Ray Publish 0.1.0 2686ebb

PIC32MX795F512HT-80I

Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · TQFP-64(10x10)

PIC32MX795F512HT-80I from Microchip Tech, in a TQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 ETXEN/PMD5/RE5 bidirectional Ethernet transmit enable output (ETXEN) on the default MII/RMII pin set, also PMP data bit PMD5 and PORTE I/O RE5.
2 ETXD0/PMD6/RE6 bidirectional Ethernet transmit data bit 0 output (ETXD0), also PMP data bit PMD6 and PORTE I/O RE6.
3 ETXD1/PMD7/RE7 bidirectional Ethernet transmit data bit 1 output (ETXD1), also PMP data bit PMD7 and PORTE I/O RE7.
4 SCK2/U6TX/U3RTS/PMA5/CN8/RG6 bidirectional SPI2 synchronous serial clock input/output, also UART6 TX, UART3 RTS, PMP address PMA5, CN8 and PORTG I/O RG6.
5 SDA4/SDI2/U3RX/PMA4/CN9/RG7 bidirectional I2C4 synchronous serial data input/output, also SPI2 data in SDI2, UART3 RX, PMP address PMA4, CN9 and PORTG I/O RG7.
6 SCL4/SDO2/U3TX/PMA3/CN10/RG8 bidirectional I2C4 synchronous serial clock input/output, also SPI2 data out SDO2, UART3 TX, PMP address PMA3, CN10 and PORTG I/O RG8.
7 MCLR input Master Clear (Reset) input; this pin is an active-low Reset to the device.
8 SS2/U6RX/U3CTS/PMA2/CN11/RG9 bidirectional SPI2 slave synchronization or frame pulse I/O, also UART6 RX, UART3 CTS, PMP address PMA2, CN11 and PORTG I/O RG9.
9 VSS power_in Ground reference for logic and I/O pins; this pin must be connected at all times.
10 VDD power_in Positive supply for peripheral logic and I/O pins.
11 AN5/C1IN+/VBUSON/CN7/RB5 bidirectional Analog input AN5, also comparator 1 positive input C1IN+, USB host/OTG bus power control output VBUSON, CN7 and PORTB I/O RB5.
12 AN4/C1IN-/CN6/RB4 bidirectional Analog input AN4, also comparator 1 negative input C1IN-, CN6 and PORTB I/O RB4.
13 AN3/C2IN+/CN5/RB3 bidirectional Analog input AN3, also comparator 2 positive input C2IN+, CN5 and PORTB I/O RB3.
14 AN2/C2IN-/CN4/RB2 bidirectional Analog input AN2, also comparator 2 negative input C2IN-, CN4 and PORTB I/O RB2.
15 PGEC1/AN1/VREF-/CVREF-/CN3/RB1 bidirectional Clock input pin for programming/debugging communication channel 1 (PGEC1), also analog input AN1, low analog voltage reference VREF-/CVREF-, CN3 and PORTB I/O RB1.
16 PGED1/AN0/VREF+/CVREF+/PMA6/CN2/RB0 bidirectional Data I/O pin for programming/debugging communication channel 1 (PGED1), also analog input AN0, high analog voltage reference VREF+/CVREF+, PMP address PMA6, CN2 and PORTB I/O RB0.
17 PGEC2/AN6/OCFA/RB6 bidirectional Clock input pin for programming/debugging communication channel 2 (PGEC2), also analog input AN6, Output Compare Fault A input OCFA and PORTB I/O RB6.
18 PGED2/AN7/RB7 bidirectional Data I/O pin for programming/debugging communication channel 2 (PGED2), also analog input AN7 and PORTB I/O RB7.
19 AVDD power_in Positive supply for analog modules; this pin must be connected at all times.
20 AVSS power_in Ground reference for analog modules; this pin must be connected at all times.
21 AN8/C2TX(2)/SS4/U5RX/U2CTS/C1OUT/RB8 bidirectional Analog input AN8, also comparator 1 output C1OUT, SPI4 slave select SS4, UART5 receive, UART2 CTS and PORTB I/O RB8.
22 AN9/C2OUT/PMA7/RB9 bidirectional Analog input AN9, also comparator 2 output C2OUT, PMP address PMA7 and PORTB I/O RB9.
23 TMS/AN10/CVREFOUT/PMA13/RB10 bidirectional JTAG test mode select input (TMS), also analog input AN10, comparator voltage reference output CVREFOUT, PMP address PMA13 and PORTB I/O RB10.
24 TDO/AN11/PMA12/RB11 bidirectional JTAG test data output (TDO), also analog input AN11, PMP address PMA12 and PORTB I/O RB11.
25 VSS power_in Ground reference for logic and I/O pins; this pin must be connected at all times.
26 VDD power_in Positive supply for peripheral logic and I/O pins.
27 TCK/AN12/PMA11/RB12 bidirectional JTAG test clock input (TCK), also analog input AN12, PMP address PMA11 and PORTB I/O RB12.
28 TDI/AN13/PMA10/RB13 bidirectional JTAG test data input (TDI), also analog input AN13, PMP address PMA10 and PORTB I/O RB13.
29 AN14/C2RX(2)/SCK4/U5TX/U2RTS/PMALH/PMA1/RB14 bidirectional Analog input AN14, also SPI4 serial clock SCK4, UART5 TX, UART2 RTS, PMP address latch enable high byte PMALH, PMA1 and PORTB I/O RB14.
30 AN15/EMDC/AEMDC/OCFB/PMALL/PMA0/CN12/RB15 bidirectional Analog input AN15, also Ethernet management clock EMDC, Output Compare Fault B input OCFB, PMP address latch enable low byte PMALL, PMA0, CN12 and PORTB I/O RB15.
31 AC1TX/SDA5/SDI4/U2RX/PMA9/CN17/RF4 bidirectional Alternate CAN1 bus transmit output (AC1TX), also I2C5 synchronous serial data SDA5, SPI4 data in SDI4, UART2 receive, PMP address PMA9 and PORTF I/O RF4.
32 AC1RX/SCL5/SDO4/U2TX/PMA8/CN18/RF5 bidirectional Alternate CAN1 bus receive input (AC1RX, Schmitt trigger), also I2C5 serial clock SCL5, SPI4 data out SDO4, UART2 transmit, PMP address PMA8 and PORTF I/O RF5.
33 USBID/RF3 bidirectional USB OTG ID detect input (Schmitt trigger), also PORTF I/O RF3.
34 VBUS power_in USB bus power monitor input (analog).
35 VUSB3V3 power_in USB internal transceiver supply; if the USB module is not used, this pin must be connected to VDD.
36 D-/RG3 bidirectional USB D- differential data line (analog I/O), also PORTG input RG3.
37 D+/RG2 bidirectional USB D+ differential data line (analog I/O), also PORTG input RG2.
38 VDD power_in Positive supply for peripheral logic and I/O pins.
39 OSC1/CLKI/RC12 bidirectional Oscillator crystal input (Schmitt trigger in RC mode, CMOS otherwise), also external clock source input CLKI and PORTC I/O RC12.
40 OSC2/CLKO/RC15 bidirectional Oscillator crystal output connecting to a crystal or resonator in crystal mode, optionally CLKO in RC and EC modes, and PORTC I/O RC15.
41 VSS power_in Ground reference for logic and I/O pins; this pin must be connected at all times.
42 RTCC/AERXD1/ETXD3/IC1/INT1/RD8 bidirectional Real-Time Clock alarm output RTCC, also input capture IC1, external interrupt INT1, Ethernet transmit data ETXD3 and PORTD I/O RD8.
43 AERXD0/ETXD2/SS3/U4RX/U1CTS/SDA1/IC2/INT2/RD9 bidirectional SPI3 slave synchronization I/O, also I2C1 serial data SDA1, input capture IC2, external interrupt INT2, Ethernet transmit data ETXD2 and PORTD I/O RD9.
44 ECOL/AECRSDV/SCL1/IC3/PMCS2/PMA15/INT3/RD10 bidirectional I2C1 serial clock SCL1, input capture IC3, Parallel Master Port chip select 2 PMCS2, external interrupt INT3, Ethernet collision detect ECOL and PORTD I/O RD10.
45 ECRS/AEREFCLK/IC4/PMCS1/PMA14/INT4/RD11 bidirectional Ethernet carrier sense ECRS, also input capture IC4, Parallel Master Port chip select 1 PMCS1, external interrupt INT4 and PORTD I/O RD11.
46 OC1/INT0/RD0 bidirectional Output Compare Output 1 (OC1), also external interrupt INT0 and PORTD I/O RD0.
47 SOSCI/CN1/RC13 bidirectional 32.768 kHz low-power oscillator crystal input (CMOS), also change notification input CN1 and PORTC I/O RC13.
48 SOSCO/T1CK/CN0/RC14 bidirectional 32.768 kHz low-power oscillator crystal output, also Timer1 external clock input T1CK, change notification input CN0 and PORTC I/O RC14.
49 EMDIO/AEMDIO/SCK3/U4TX/U1RTS/OC2/RD1 bidirectional Ethernet management data input/output EMDIO, also SPI3 serial clock SCK3, UART4 TX, UART1 RTS, Output Compare Output 2 and PORTD I/O RD1.
50 SDA3/SDI3/U1RX/OC3/RD2 bidirectional I2C3 synchronous serial data input/output SDA3, also SPI3 data in SDI3, UART1 receive, Output Compare Output 3 and PORTD I/O RD2.
51 SCL3/SDO3/U1TX/OC4/RD3 bidirectional I2C3 synchronous serial clock input/output SCL3, also SPI3 data out SDO3, UART1 transmit, Output Compare Output 4 and PORTD I/O RD3.
52 OC5/IC5/PMWR/CN13/RD4 bidirectional Output Compare Output 5 (OC5), also input capture IC5, Parallel Master Port write strobe PMWR, change notification input CN13 and PORTD I/O RD4.
53 PMRD/CN14/RD5 bidirectional Parallel Master Port read strobe output PMRD, also change notification input CN14 and PORTD I/O RD5.
54 AETXEN/ETXERR/CN15/RD6 bidirectional Alternate Ethernet transmit enable AETXEN, also Ethernet transmit error ETXERR, change notification input CN15 and PORTD I/O RD6.
55 ETXCLK/AERXERR/CN16/RD7 bidirectional Ethernet transmit clock input ETXCLK (Schmitt trigger), also change notification input CN16 and PORTD I/O RD7.
56 VCAP passive Capacitor for the internal voltage regulator; this pin must not be connected to VDD and requires a CEFC capacitor to ground.
57 VDD power_in Positive supply for peripheral logic and I/O pins.
58 C1RX/AETXD1/ERXD3/RF0 bidirectional CAN1 bus receive pin C1RX (Schmitt trigger), also alternate Ethernet transmit data AETXD1 and PORTF I/O RF0.
59 C1TX/AETXD0/ERXD2/RF1 bidirectional CAN1 bus transmit pin C1TX, also alternate Ethernet transmit data AETXD0 and PORTF I/O RF1.
60 ERXD1/PMD0/RE0 bidirectional Ethernet receive data bit 1 input ERXD1 (Schmitt trigger), also Parallel Master Port data PMD0 and PORTE I/O RE0.
61 ERXD0/PMD1/RE1 bidirectional Ethernet receive data bit 0 input ERXD0 (Schmitt trigger), also Parallel Master Port data PMD1 and PORTE I/O RE1.
62 ERXDV/ECRSDV/PMD2/RE2 bidirectional Ethernet receive data valid input ERXDV (Schmitt trigger), also Parallel Master Port data PMD2 and PORTE I/O RE2.
63 ERXCLK/EREFCLK/PMD3/RE3 bidirectional Ethernet receive clock input ERXCLK (Schmitt trigger), also Ethernet reference clock EREFCLK, Parallel Master Port data PMD3 and PORTE I/O RE3.
64 ERXERR/PMD4/RE4 bidirectional Ethernet receive error input ERXERR (Schmitt trigger), also Parallel Master Port data PMD4 and PORTE I/O RE4.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package TQFP-64(10x10)
Category Single Chip Microcomputer/Microcontroller
Pins 64

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Operating voltage range 2.3 3.6 V 1
Operating temperature range -40 105 ºC 1
CPU clock frequency (DC to 80 MHz) 80 MHz 1
VCAP external CEFC capacitor voltage rating 6 V CEFC capacitor connected from VCAP to ground, 'at least a 6V rating' 38
Decoupling capacitor voltage rating 10 20 V 0.1 µF (100 nF) decoupling capacitor recommended 37
Decoupling capacitor resonance frequency 20 MHz Low-ESR ceramic decoupling capacitor, 'in the range of 20 MHz and higher' 37

CAD (KiCad official)

  • Symbol: PIC32MX795F512HT-80I
  • Footprint: Package_QFP:TQFP-64_10x10mm_P0.5mm
  • 3D model: TQFP-64(10x10) (KiCad packages3D, STEP)
  • 3D model files: pic32mx795f512ht-80i-pt-etched.step / pic32mx795f512ht-80i-pt-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pic32mx795f512ht-80i-pt.step / pic32mx795f512ht-80i-pt.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheetDatasheet_DS60001156K.pdf) (446 pp, sha256 2413ac5834b12306, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF