component
PIC32MX795F512HT-80I/PT
Public Made by Adomby adom
Microchip Tech Microcontroller Units (MCUs/MPUs/SOCs), TQFP-64(10x10). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Generated by kicad-footprint-generator · KiCad file format 20260206
PIC32MX795F512HT-80I
Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · TQFP-64(10x10)
PIC32MX795F512HT-80I from Microchip Tech, in a TQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | ETXEN/PMD5/RE5 | bidirectional | Ethernet transmit enable output (ETXEN) on the default MII/RMII pin set, also PMP data bit PMD5 and PORTE I/O RE5. |
| 2 | ETXD0/PMD6/RE6 | bidirectional | Ethernet transmit data bit 0 output (ETXD0), also PMP data bit PMD6 and PORTE I/O RE6. |
| 3 | ETXD1/PMD7/RE7 | bidirectional | Ethernet transmit data bit 1 output (ETXD1), also PMP data bit PMD7 and PORTE I/O RE7. |
| 4 | SCK2/U6TX/U3RTS/PMA5/CN8/RG6 | bidirectional | SPI2 synchronous serial clock input/output, also UART6 TX, UART3 RTS, PMP address PMA5, CN8 and PORTG I/O RG6. |
| 5 | SDA4/SDI2/U3RX/PMA4/CN9/RG7 | bidirectional | I2C4 synchronous serial data input/output, also SPI2 data in SDI2, UART3 RX, PMP address PMA4, CN9 and PORTG I/O RG7. |
| 6 | SCL4/SDO2/U3TX/PMA3/CN10/RG8 | bidirectional | I2C4 synchronous serial clock input/output, also SPI2 data out SDO2, UART3 TX, PMP address PMA3, CN10 and PORTG I/O RG8. |
| 7 | MCLR | input | Master Clear (Reset) input; this pin is an active-low Reset to the device. |
| 8 | SS2/U6RX/U3CTS/PMA2/CN11/RG9 | bidirectional | SPI2 slave synchronization or frame pulse I/O, also UART6 RX, UART3 CTS, PMP address PMA2, CN11 and PORTG I/O RG9. |
| 9 | VSS | power_in | Ground reference for logic and I/O pins; this pin must be connected at all times. |
| 10 | VDD | power_in | Positive supply for peripheral logic and I/O pins. |
| 11 | AN5/C1IN+/VBUSON/CN7/RB5 | bidirectional | Analog input AN5, also comparator 1 positive input C1IN+, USB host/OTG bus power control output VBUSON, CN7 and PORTB I/O RB5. |
| 12 | AN4/C1IN-/CN6/RB4 | bidirectional | Analog input AN4, also comparator 1 negative input C1IN-, CN6 and PORTB I/O RB4. |
| 13 | AN3/C2IN+/CN5/RB3 | bidirectional | Analog input AN3, also comparator 2 positive input C2IN+, CN5 and PORTB I/O RB3. |
| 14 | AN2/C2IN-/CN4/RB2 | bidirectional | Analog input AN2, also comparator 2 negative input C2IN-, CN4 and PORTB I/O RB2. |
| 15 | PGEC1/AN1/VREF-/CVREF-/CN3/RB1 | bidirectional | Clock input pin for programming/debugging communication channel 1 (PGEC1), also analog input AN1, low analog voltage reference VREF-/CVREF-, CN3 and PORTB I/O RB1. |
| 16 | PGED1/AN0/VREF+/CVREF+/PMA6/CN2/RB0 | bidirectional | Data I/O pin for programming/debugging communication channel 1 (PGED1), also analog input AN0, high analog voltage reference VREF+/CVREF+, PMP address PMA6, CN2 and PORTB I/O RB0. |
| 17 | PGEC2/AN6/OCFA/RB6 | bidirectional | Clock input pin for programming/debugging communication channel 2 (PGEC2), also analog input AN6, Output Compare Fault A input OCFA and PORTB I/O RB6. |
| 18 | PGED2/AN7/RB7 | bidirectional | Data I/O pin for programming/debugging communication channel 2 (PGED2), also analog input AN7 and PORTB I/O RB7. |
| 19 | AVDD | power_in | Positive supply for analog modules; this pin must be connected at all times. |
| 20 | AVSS | power_in | Ground reference for analog modules; this pin must be connected at all times. |
| 21 | AN8/C2TX(2)/SS4/U5RX/U2CTS/C1OUT/RB8 | bidirectional | Analog input AN8, also comparator 1 output C1OUT, SPI4 slave select SS4, UART5 receive, UART2 CTS and PORTB I/O RB8. |
| 22 | AN9/C2OUT/PMA7/RB9 | bidirectional | Analog input AN9, also comparator 2 output C2OUT, PMP address PMA7 and PORTB I/O RB9. |
| 23 | TMS/AN10/CVREFOUT/PMA13/RB10 | bidirectional | JTAG test mode select input (TMS), also analog input AN10, comparator voltage reference output CVREFOUT, PMP address PMA13 and PORTB I/O RB10. |
| 24 | TDO/AN11/PMA12/RB11 | bidirectional | JTAG test data output (TDO), also analog input AN11, PMP address PMA12 and PORTB I/O RB11. |
| 25 | VSS | power_in | Ground reference for logic and I/O pins; this pin must be connected at all times. |
| 26 | VDD | power_in | Positive supply for peripheral logic and I/O pins. |
| 27 | TCK/AN12/PMA11/RB12 | bidirectional | JTAG test clock input (TCK), also analog input AN12, PMP address PMA11 and PORTB I/O RB12. |
| 28 | TDI/AN13/PMA10/RB13 | bidirectional | JTAG test data input (TDI), also analog input AN13, PMP address PMA10 and PORTB I/O RB13. |
| 29 | AN14/C2RX(2)/SCK4/U5TX/U2RTS/PMALH/PMA1/RB14 | bidirectional | Analog input AN14, also SPI4 serial clock SCK4, UART5 TX, UART2 RTS, PMP address latch enable high byte PMALH, PMA1 and PORTB I/O RB14. |
| 30 | AN15/EMDC/AEMDC/OCFB/PMALL/PMA0/CN12/RB15 | bidirectional | Analog input AN15, also Ethernet management clock EMDC, Output Compare Fault B input OCFB, PMP address latch enable low byte PMALL, PMA0, CN12 and PORTB I/O RB15. |
| 31 | AC1TX/SDA5/SDI4/U2RX/PMA9/CN17/RF4 | bidirectional | Alternate CAN1 bus transmit output (AC1TX), also I2C5 synchronous serial data SDA5, SPI4 data in SDI4, UART2 receive, PMP address PMA9 and PORTF I/O RF4. |
| 32 | AC1RX/SCL5/SDO4/U2TX/PMA8/CN18/RF5 | bidirectional | Alternate CAN1 bus receive input (AC1RX, Schmitt trigger), also I2C5 serial clock SCL5, SPI4 data out SDO4, UART2 transmit, PMP address PMA8 and PORTF I/O RF5. |
| 33 | USBID/RF3 | bidirectional | USB OTG ID detect input (Schmitt trigger), also PORTF I/O RF3. |
| 34 | VBUS | power_in | USB bus power monitor input (analog). |
| 35 | VUSB3V3 | power_in | USB internal transceiver supply; if the USB module is not used, this pin must be connected to VDD. |
| 36 | D-/RG3 | bidirectional | USB D- differential data line (analog I/O), also PORTG input RG3. |
| 37 | D+/RG2 | bidirectional | USB D+ differential data line (analog I/O), also PORTG input RG2. |
| 38 | VDD | power_in | Positive supply for peripheral logic and I/O pins. |
| 39 | OSC1/CLKI/RC12 | bidirectional | Oscillator crystal input (Schmitt trigger in RC mode, CMOS otherwise), also external clock source input CLKI and PORTC I/O RC12. |
| 40 | OSC2/CLKO/RC15 | bidirectional | Oscillator crystal output connecting to a crystal or resonator in crystal mode, optionally CLKO in RC and EC modes, and PORTC I/O RC15. |
| 41 | VSS | power_in | Ground reference for logic and I/O pins; this pin must be connected at all times. |
| 42 | RTCC/AERXD1/ETXD3/IC1/INT1/RD8 | bidirectional | Real-Time Clock alarm output RTCC, also input capture IC1, external interrupt INT1, Ethernet transmit data ETXD3 and PORTD I/O RD8. |
| 43 | AERXD0/ETXD2/SS3/U4RX/U1CTS/SDA1/IC2/INT2/RD9 | bidirectional | SPI3 slave synchronization I/O, also I2C1 serial data SDA1, input capture IC2, external interrupt INT2, Ethernet transmit data ETXD2 and PORTD I/O RD9. |
| 44 | ECOL/AECRSDV/SCL1/IC3/PMCS2/PMA15/INT3/RD10 | bidirectional | I2C1 serial clock SCL1, input capture IC3, Parallel Master Port chip select 2 PMCS2, external interrupt INT3, Ethernet collision detect ECOL and PORTD I/O RD10. |
| 45 | ECRS/AEREFCLK/IC4/PMCS1/PMA14/INT4/RD11 | bidirectional | Ethernet carrier sense ECRS, also input capture IC4, Parallel Master Port chip select 1 PMCS1, external interrupt INT4 and PORTD I/O RD11. |
| 46 | OC1/INT0/RD0 | bidirectional | Output Compare Output 1 (OC1), also external interrupt INT0 and PORTD I/O RD0. |
| 47 | SOSCI/CN1/RC13 | bidirectional | 32.768 kHz low-power oscillator crystal input (CMOS), also change notification input CN1 and PORTC I/O RC13. |
| 48 | SOSCO/T1CK/CN0/RC14 | bidirectional | 32.768 kHz low-power oscillator crystal output, also Timer1 external clock input T1CK, change notification input CN0 and PORTC I/O RC14. |
| 49 | EMDIO/AEMDIO/SCK3/U4TX/U1RTS/OC2/RD1 | bidirectional | Ethernet management data input/output EMDIO, also SPI3 serial clock SCK3, UART4 TX, UART1 RTS, Output Compare Output 2 and PORTD I/O RD1. |
| 50 | SDA3/SDI3/U1RX/OC3/RD2 | bidirectional | I2C3 synchronous serial data input/output SDA3, also SPI3 data in SDI3, UART1 receive, Output Compare Output 3 and PORTD I/O RD2. |
| 51 | SCL3/SDO3/U1TX/OC4/RD3 | bidirectional | I2C3 synchronous serial clock input/output SCL3, also SPI3 data out SDO3, UART1 transmit, Output Compare Output 4 and PORTD I/O RD3. |
| 52 | OC5/IC5/PMWR/CN13/RD4 | bidirectional | Output Compare Output 5 (OC5), also input capture IC5, Parallel Master Port write strobe PMWR, change notification input CN13 and PORTD I/O RD4. |
| 53 | PMRD/CN14/RD5 | bidirectional | Parallel Master Port read strobe output PMRD, also change notification input CN14 and PORTD I/O RD5. |
| 54 | AETXEN/ETXERR/CN15/RD6 | bidirectional | Alternate Ethernet transmit enable AETXEN, also Ethernet transmit error ETXERR, change notification input CN15 and PORTD I/O RD6. |
| 55 | ETXCLK/AERXERR/CN16/RD7 | bidirectional | Ethernet transmit clock input ETXCLK (Schmitt trigger), also change notification input CN16 and PORTD I/O RD7. |
| 56 | VCAP | passive | Capacitor for the internal voltage regulator; this pin must not be connected to VDD and requires a CEFC capacitor to ground. |
| 57 | VDD | power_in | Positive supply for peripheral logic and I/O pins. |
| 58 | C1RX/AETXD1/ERXD3/RF0 | bidirectional | CAN1 bus receive pin C1RX (Schmitt trigger), also alternate Ethernet transmit data AETXD1 and PORTF I/O RF0. |
| 59 | C1TX/AETXD0/ERXD2/RF1 | bidirectional | CAN1 bus transmit pin C1TX, also alternate Ethernet transmit data AETXD0 and PORTF I/O RF1. |
| 60 | ERXD1/PMD0/RE0 | bidirectional | Ethernet receive data bit 1 input ERXD1 (Schmitt trigger), also Parallel Master Port data PMD0 and PORTE I/O RE0. |
| 61 | ERXD0/PMD1/RE1 | bidirectional | Ethernet receive data bit 0 input ERXD0 (Schmitt trigger), also Parallel Master Port data PMD1 and PORTE I/O RE1. |
| 62 | ERXDV/ECRSDV/PMD2/RE2 | bidirectional | Ethernet receive data valid input ERXDV (Schmitt trigger), also Parallel Master Port data PMD2 and PORTE I/O RE2. |
| 63 | ERXCLK/EREFCLK/PMD3/RE3 | bidirectional | Ethernet receive clock input ERXCLK (Schmitt trigger), also Ethernet reference clock EREFCLK, Parallel Master Port data PMD3 and PORTE I/O RE3. |
| 64 | ERXERR/PMD4/RE4 | bidirectional | Ethernet receive error input ERXERR (Schmitt trigger), also Parallel Master Port data PMD4 and PORTE I/O RE4. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | TQFP-64(10x10) |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 64 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating voltage range | 2.3 | 3.6 | V | 1 | |||
| Operating temperature range | -40 | 105 | ºC | 1 | |||
| CPU clock frequency (DC to 80 MHz) | 80 | MHz | 1 | ||||
| VCAP external CEFC capacitor voltage rating | 6 | V | CEFC capacitor connected from VCAP to ground, 'at least a 6V rating' | 38 | |||
| Decoupling capacitor voltage rating | 10 | 20 | V | 0.1 µF (100 nF) decoupling capacitor recommended | 37 | ||
| Decoupling capacitor resonance frequency | 20 | MHz | Low-ESR ceramic decoupling capacitor, 'in the range of 20 MHz and higher' | 37 |
CAD (KiCad official)
- Symbol:
PIC32MX795F512HT-80I - Footprint:
Package_QFP:TQFP-64_10x10mm_P0.5mm - 3D model: TQFP-64(10x10) (KiCad packages3D, STEP)
- 3D model files:
pic32mx795f512ht-80i-pt-etched.step/pic32mx795f512ht-80i-pt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic32mx795f512ht-80i-pt.step/pic32mx795f512ht-80i-pt.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheetDatasheet_DS60001156K.pdf) (446 pp, sha256
2413ac5834b12306, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).