main
Ray Publish 0.1.0 af0e590

PIC32MX795F512H-80V

Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · TQFP-64(10x10)

PIC32MX795F512H-80V from Microchip Tech, in a TQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 ETXEN/PMD5/RE5 bidirectional PORTE bit RE5 is a bidirectional I/O (ST), also used for Parallel Master Port data PMD5 and Ethernet transmit enable ETXEN.
2 ETXD0/PMD6/RE6 bidirectional PORTE bit RE6 is a bidirectional I/O (ST), also used for Parallel Master Port data PMD6 and Ethernet transmit data ETXD0.
3 ETXD1/PMD7/RE7 bidirectional PORTE bit RE7 is a bidirectional I/O (ST), also used for Parallel Master Port data PMD7 and Ethernet transmit data ETXD1.
4 SCK2/U6TX/U3RTS/PMA5/CN8/RG6 bidirectional PORTG bit RG6 is a bidirectional I/O (ST), also used for SPI2 clock SCK2, UART6 TX, UART3 RTS, Parallel Master Port address PMA5 and change notice CN8.
5 SDA4/SDI2/U3RX/PMA4/CN9/RG7 bidirectional PORTG bit RG7 is a bidirectional I/O (ST), also used for I2C4 data SDA4, SPI2 data input SDI2, UART3 RX, Parallel Master Port address PMA4 and change notice CN9.
6 SCL4/SDO2/U3TX/PMA3/CN10/RG8 bidirectional PORTG bit RG8 is a bidirectional I/O (ST), also used for I2C4 clock SCL4, SPI2 data output SDO2, UART3 TX, Parallel Master Port address PMA3 and change notice CN10.
7 MCLR input Active-low Master Clear (Reset) input to the device (I/P, ST); it also carries the programming and debugging function.
8 SS2/U6RX/U3CTS/PMA2/CN11/RG9 bidirectional PORTG bit RG9 is a bidirectional I/O (ST), also used for SPI2 slave select SS2, UART6 RX, UART3 CTS, Parallel Master Port address PMA2 and change notice CN11.
9 VSS power_in Ground reference for logic and I/O pins; this pin must be connected at all times.
10 VDD power_in Positive supply for peripheral logic and I/O pins.
11 AN5/C1IN+/VBUSON/CN7/RB5 bidirectional PORTB bit RB5 is a bidirectional I/O (ST), also used for analog input AN5, Comparator 1 positive input C1IN+, USB host/OTG bus power control output VBUSON and change notice CN7.
12 AN4/C1IN-/CN6/RB4 bidirectional PORTB bit RB4 is a bidirectional I/O (ST), also used for analog input AN4, Comparator 1 negative input C1IN- and change notice CN6.
13 AN3/C2IN+/CN5/RB3 bidirectional PORTB bit RB3 is a bidirectional I/O (ST), also used for analog input AN3, Comparator 2 positive input C2IN+ and change notice CN5.
14 AN2/C2IN-/CN4/RB2 bidirectional PORTB bit RB2 is a bidirectional I/O (ST), also used for analog input AN2, Comparator 2 negative input C2IN- and change notice CN4.
15 PGEC1/AN1/VREF-/CVREF-/CN3/RB1 bidirectional PORTB bit RB1 is a bidirectional I/O (ST), also used for programming/debug clock PGEC1, analog input AN1, analog voltage reference input VREF- (low), CVREF- and change notice CN3.
16 PGED1/AN0/VREF+/CVREF+/PMA6/CN2/RB0 bidirectional PORTB bit RB0 is a bidirectional I/O (ST), also used for programming/debug data PGED1, analog input AN0, analog voltage reference input VREF+ (high), CVREF+, Parallel Master Port address PMA6 and change notice CN2.
17 PGEC2/AN6/OCFA/RB6 bidirectional PORTB bit RB6 is a bidirectional I/O (ST), also used for programming/debug clock PGEC2, analog input AN6 and Output Compare Fault A input OCFA.
18 PGED2/AN7/RB7 bidirectional PORTB bit RB7 is a bidirectional I/O (ST), also used for programming/debug data PGED2 and analog input AN7.
19 AVDD power_in Positive supply for analog modules; this pin must be connected at all times.
20 AVSS power_in Ground reference for analog modules; this pin must be connected at all times.
21 AN8/C2TX/SS4/U5RX/U2CTS/C1OUT/RB8 bidirectional PORTB bit RB8 is a bidirectional I/O (ST), also used for analog input AN8, CAN2 bus transmit C2TX, Comparator 1 output C1OUT, SPI4 slave select SS4, UART5 RX and UART2 CTS.
22 AN9/C2OUT/PMA7/RB9 bidirectional PORTB bit RB9 is a bidirectional I/O (ST), also used for analog input AN9, Comparator 2 output C2OUT and Parallel Master Port address PMA7.
23 TMS/AN10/CVREFOUT/PMA13/RB10 bidirectional PORTB bit RB10 is a bidirectional I/O (ST), also used for JTAG test mode select TMS, analog input AN10, comparator voltage reference output CVREFOUT and Parallel Master Port address PMA13.
24 TDO/AN11/PMA12/RB11 bidirectional PORTB bit RB11 is a bidirectional I/O (ST), also used for JTAG test data output TDO, analog input AN11 and Parallel Master Port address PMA12.
25 VSS power_in Ground reference for logic and I/O pins; this pin must be connected at all times.
26 VDD power_in Positive supply for peripheral logic and I/O pins.
27 TCK/AN12/PMA11/RB12 bidirectional PORTB bit RB12 is a bidirectional I/O (ST), also used for JTAG test clock input TCK, analog input AN12 and Parallel Master Port address PMA11.
28 TDI/AN13/PMA10/RB13 bidirectional PORTB bit RB13 is a bidirectional I/O (ST), also used for JTAG test data input TDI, analog input AN13 and Parallel Master Port address PMA10.
29 AN14/C2RX/SCK4/U5TX/U2RTS/PMALH/PMA1/RB14 bidirectional PORTB bit RB14 is a bidirectional I/O (ST), also used for analog input AN14, CAN2 bus receive C2RX, SPI4 clock SCK4, UART5 TX, UART2 RTS, Parallel Master Port address latch PMALH and address PMA1.
30 AN15/EMDC/AEMDC/OCFB/PMALL/PMA0/CN12/RB15 bidirectional PORTB bit RB15 is a bidirectional I/O (ST), also used for analog input AN15, Ethernet management clock EMDC, Output Compare Fault B input OCFB, Parallel Master Port address latch PMALL, address PMA0 and change notice CN12.
31 AC1TX/SDA5/SDI4/U2RX/PMA9/CN17/RF4 bidirectional PORTF bit RF4 is a bidirectional I/O (ST), also used for alternate CAN1 bus transmit AC1TX, I2C5 data SDA5, SPI4 data input SDI4, UART2 RX, Parallel Master Port address PMA9 and change notice CN17.
32 AC1RX/SCL5/SDO4/U2TX/PMA8/CN18/RF5 bidirectional PORTF bit RF5 is a bidirectional I/O (ST), also used for alternate CAN1 bus receive AC1RX, I2C5 clock SCL5, SPI4 data output SDO4, UART2 TX, Parallel Master Port address PMA8 and change notice CN18.
33 USBID/RF3 bidirectional PORTF bit RF3 is a bidirectional I/O (ST), also used as the USB OTG ID detect input USBID.
34 VBUS power_in Analog input for USB bus power monitoring.
35 VUSB3V3 power_in USB internal transceiver supply; if the USB module is not used, this pin must be connected to VDD.
36 D-/RG3 bidirectional USB D- differential data line (analog I/O), which is also PORTG input pin RG3.
37 D+/RG2 bidirectional USB D+ differential data line (analog I/O), which is also PORTG input pin RG2.
38 VDD power_in Positive supply for peripheral logic and I/O pins.
39 OSC1/CLKI/RC12 bidirectional Oscillator crystal input (ST buffer in RC mode, CMOS otherwise) that is also the external clock source input CLKI; PORTC bit RC12.
40 OSC2/CLKO/RC15 bidirectional Oscillator crystal output that connects to a crystal or resonator and optionally functions as CLKO in RC and EC modes; PORTC bit RC15.
41 VSS power_in Ground reference for logic and I/O pins; this pin must be connected at all times.
42 RTCC/AERXD1/ETXD3/IC1/INT1/RD8 bidirectional PORTD bit RD8 is a bidirectional I/O (ST), also used for RTCC alarm output, Ethernet transmit data ETXD3, alternate Ethernet receive data AERXD1, Input Capture 1 IC1 and external interrupt INT1.
43 AERXD0/ETXD2/SS3/U4RX/U1CTS/SDA1/IC2/INT2/RD9 bidirectional PORTD bit RD9 is a bidirectional I/O (ST), also used for alternate Ethernet receive data AERXD0, Ethernet transmit data ETXD2, SPI3 slave select SS3, UART4 RX, UART1 CTS, I2C1 data SDA1, Input Capture 2 IC2 and external interrupt INT2.
44 ECOL/AECRSDV/SCL1/IC3/PMCS2/PMA15/INT3/RD10 bidirectional PORTD bit RD10 is a bidirectional I/O (ST), also used for Ethernet collision detect ECOL, alternate Ethernet carrier sense data valid AECRSDV, I2C1 clock SCL1, Input Capture 3 IC3, Parallel Master Port chip select 2 PMCS2, address PMA15 and external interrupt INT3.
45 ECRS/AEREFCLK/IC4/PMCS1/PMA14/INT4/RD11 bidirectional PORTD bit RD11 is a bidirectional I/O (ST), also used for Ethernet carrier sense ECRS, alternate Ethernet reference clock AEREFCLK, Input Capture 4 IC4, Parallel Master Port chip select 1 PMCS1, address PMA14 and external interrupt INT4.
46 OC1/INT0/RD0 bidirectional PORTD bit RD0 is a bidirectional I/O (ST), also used as Output Compare 1 output OC1 and external interrupt INT0.
47 SOSCI/CN1/RC13 bidirectional PORTC bit RC13 is a bidirectional I/O (ST), also used as the 32.768 kHz low-power secondary oscillator crystal input SOSCI and change notice CN1.
48 SOSCO/T1CK/CN0/RC14 bidirectional PORTC bit RC14 is a bidirectional I/O (ST), also used as the 32.768 kHz low-power secondary oscillator crystal output SOSCO, Timer1 external clock input T1CK and change notice CN0.
49 EMDIO/AEMDIO/SCK3/U4TX/U1RTS/OC2/RD1 bidirectional PORTD bit RD1 is a bidirectional I/O (ST), also used for Ethernet management data EMDIO, alternate Ethernet management data AEMDIO, SPI3 clock SCK3, UART4 TX, UART1 RTS and Output Compare 2 output OC2.
50 SDA3/SDI3/U1RX/OC3/RD2 bidirectional PORTD bit RD2 is a bidirectional I/O (ST), also used for I2C3 data SDA3, SPI3 data input SDI3, UART1 RX and Output Compare 3 output OC3.
51 SCL3/SDO3/U1TX/OC4/RD3 bidirectional PORTD bit RD3 is a bidirectional I/O (ST), also used for I2C3 clock SCL3, SPI3 data output SDO3, UART1 TX and Output Compare 4 output OC4.
52 OC5/IC5/PMWR/CN13/RD4 bidirectional PORTD bit RD4 is a bidirectional I/O (ST), also used for Output Compare 5 output OC5, Input Capture 5 IC5, Parallel Master Port write strobe PMWR and change notice CN13.
53 PMRD/CN14/RD5 bidirectional PORTD bit RD5 is a bidirectional I/O (ST), also used for the Parallel Master Port read strobe PMRD and change notice CN14.
54 AETXEN/ETXERR/CN15/RD6 bidirectional PORTD bit RD6 is a bidirectional I/O (ST), also used for alternate Ethernet transmit enable AETXEN, Ethernet transmit error ETXERR and change notice CN15.
55 ETXCLK/AERXERR/CN16/RD7 bidirectional PORTD bit RD7 is a bidirectional I/O (ST), also used for Ethernet transmit clock ETXCLK, alternate Ethernet receive error AERXERR and change notice CN16.
56 VCAP passive Capacitor connection for the internal voltage regulator; it must not be connected to VDD and requires a CEFC capacitor of at least 6V rated, connected to ground.
57 VDD power_in Positive supply for peripheral logic and I/O pins.
58 C1RX/AETXD1/ERXD3/RF0 bidirectional PORTF bit RF0 is a bidirectional I/O (ST), also used for CAN1 bus receive C1RX, alternate Ethernet transmit data AETXD1 and Ethernet receive data ERXD3.
59 C1TX/AETXD0/ERXD2/RF1 bidirectional PORTF bit RF1 is a bidirectional I/O (ST), also used for CAN1 bus transmit C1TX, alternate Ethernet transmit data AETXD0 and Ethernet receive data ERXD2.
60 ERXD1/PMD0/RE0 bidirectional PORTE bit RE0 is a bidirectional I/O (ST), also used for Ethernet receive data ERXD1 and Parallel Master Port data PMD0.
61 ERXD0/PMD1/RE1 bidirectional PORTE bit RE1 is a bidirectional I/O (ST), also used for Ethernet receive data ERXD0 and Parallel Master Port data PMD1.
62 ERXDV/ECRSDV/PMD2/RE2 bidirectional PORTE bit RE2 is a bidirectional I/O (ST), also used for Ethernet receive data valid ERXDV, Ethernet carrier sense data valid ECRSDV and Parallel Master Port data PMD2.
63 ERXCLK/EREFCLK/PMD3/RE3 bidirectional PORTE bit RE3 is a bidirectional I/O (ST), also used for Ethernet receive clock ERXCLK, Ethernet reference clock EREFCLK and Parallel Master Port data PMD3.
64 ERXERR/PMD4/RE4 bidirectional PORTE bit RE4 is a bidirectional I/O (ST), also used for Ethernet receive error ERXERR and Parallel Master Port data PMD4.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package TQFP-64(10x10)
Category Single Chip Microcomputer/Microcontroller
Pins 64

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Operating voltage range 2.3 3.6 V 1
Operating temperature range -40 105 ºC 1
Maximum operating frequency (CPU clock) 0 80 MHz 1

CAD (KiCad official)

  • Symbol: PIC32MX795F512H-80V
  • Footprint: Package_QFP:TQFP-64_10x10mm_P0.5mm
  • 3D model: TQFP-64(10x10) (KiCad packages3D, STEP)
  • 3D model files: pic32mx795f512h-80v-pt-etched.step / pic32mx795f512h-80v-pt-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pic32mx795f512h-80v-pt.step / pic32mx795f512h-80v-pt.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheetDatasheet_DS60001156K.pdf) (446 pp, sha256 2413ac5834b12306, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF