component
PIC32MX795F512H-80V/PT
Public Made by Adomby adom
Microchip Tech Microcontroller Units (MCUs/MPUs/SOCs), TQFP-64(10x10). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Generated by kicad-footprint-generator · KiCad file format 20260206
PIC32MX795F512H-80V
Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · TQFP-64(10x10)
PIC32MX795F512H-80V from Microchip Tech, in a TQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | ETXEN/PMD5/RE5 | bidirectional | PORTE bit RE5 is a bidirectional I/O (ST), also used for Parallel Master Port data PMD5 and Ethernet transmit enable ETXEN. |
| 2 | ETXD0/PMD6/RE6 | bidirectional | PORTE bit RE6 is a bidirectional I/O (ST), also used for Parallel Master Port data PMD6 and Ethernet transmit data ETXD0. |
| 3 | ETXD1/PMD7/RE7 | bidirectional | PORTE bit RE7 is a bidirectional I/O (ST), also used for Parallel Master Port data PMD7 and Ethernet transmit data ETXD1. |
| 4 | SCK2/U6TX/U3RTS/PMA5/CN8/RG6 | bidirectional | PORTG bit RG6 is a bidirectional I/O (ST), also used for SPI2 clock SCK2, UART6 TX, UART3 RTS, Parallel Master Port address PMA5 and change notice CN8. |
| 5 | SDA4/SDI2/U3RX/PMA4/CN9/RG7 | bidirectional | PORTG bit RG7 is a bidirectional I/O (ST), also used for I2C4 data SDA4, SPI2 data input SDI2, UART3 RX, Parallel Master Port address PMA4 and change notice CN9. |
| 6 | SCL4/SDO2/U3TX/PMA3/CN10/RG8 | bidirectional | PORTG bit RG8 is a bidirectional I/O (ST), also used for I2C4 clock SCL4, SPI2 data output SDO2, UART3 TX, Parallel Master Port address PMA3 and change notice CN10. |
| 7 | MCLR | input | Active-low Master Clear (Reset) input to the device (I/P, ST); it also carries the programming and debugging function. |
| 8 | SS2/U6RX/U3CTS/PMA2/CN11/RG9 | bidirectional | PORTG bit RG9 is a bidirectional I/O (ST), also used for SPI2 slave select SS2, UART6 RX, UART3 CTS, Parallel Master Port address PMA2 and change notice CN11. |
| 9 | VSS | power_in | Ground reference for logic and I/O pins; this pin must be connected at all times. |
| 10 | VDD | power_in | Positive supply for peripheral logic and I/O pins. |
| 11 | AN5/C1IN+/VBUSON/CN7/RB5 | bidirectional | PORTB bit RB5 is a bidirectional I/O (ST), also used for analog input AN5, Comparator 1 positive input C1IN+, USB host/OTG bus power control output VBUSON and change notice CN7. |
| 12 | AN4/C1IN-/CN6/RB4 | bidirectional | PORTB bit RB4 is a bidirectional I/O (ST), also used for analog input AN4, Comparator 1 negative input C1IN- and change notice CN6. |
| 13 | AN3/C2IN+/CN5/RB3 | bidirectional | PORTB bit RB3 is a bidirectional I/O (ST), also used for analog input AN3, Comparator 2 positive input C2IN+ and change notice CN5. |
| 14 | AN2/C2IN-/CN4/RB2 | bidirectional | PORTB bit RB2 is a bidirectional I/O (ST), also used for analog input AN2, Comparator 2 negative input C2IN- and change notice CN4. |
| 15 | PGEC1/AN1/VREF-/CVREF-/CN3/RB1 | bidirectional | PORTB bit RB1 is a bidirectional I/O (ST), also used for programming/debug clock PGEC1, analog input AN1, analog voltage reference input VREF- (low), CVREF- and change notice CN3. |
| 16 | PGED1/AN0/VREF+/CVREF+/PMA6/CN2/RB0 | bidirectional | PORTB bit RB0 is a bidirectional I/O (ST), also used for programming/debug data PGED1, analog input AN0, analog voltage reference input VREF+ (high), CVREF+, Parallel Master Port address PMA6 and change notice CN2. |
| 17 | PGEC2/AN6/OCFA/RB6 | bidirectional | PORTB bit RB6 is a bidirectional I/O (ST), also used for programming/debug clock PGEC2, analog input AN6 and Output Compare Fault A input OCFA. |
| 18 | PGED2/AN7/RB7 | bidirectional | PORTB bit RB7 is a bidirectional I/O (ST), also used for programming/debug data PGED2 and analog input AN7. |
| 19 | AVDD | power_in | Positive supply for analog modules; this pin must be connected at all times. |
| 20 | AVSS | power_in | Ground reference for analog modules; this pin must be connected at all times. |
| 21 | AN8/C2TX/SS4/U5RX/U2CTS/C1OUT/RB8 | bidirectional | PORTB bit RB8 is a bidirectional I/O (ST), also used for analog input AN8, CAN2 bus transmit C2TX, Comparator 1 output C1OUT, SPI4 slave select SS4, UART5 RX and UART2 CTS. |
| 22 | AN9/C2OUT/PMA7/RB9 | bidirectional | PORTB bit RB9 is a bidirectional I/O (ST), also used for analog input AN9, Comparator 2 output C2OUT and Parallel Master Port address PMA7. |
| 23 | TMS/AN10/CVREFOUT/PMA13/RB10 | bidirectional | PORTB bit RB10 is a bidirectional I/O (ST), also used for JTAG test mode select TMS, analog input AN10, comparator voltage reference output CVREFOUT and Parallel Master Port address PMA13. |
| 24 | TDO/AN11/PMA12/RB11 | bidirectional | PORTB bit RB11 is a bidirectional I/O (ST), also used for JTAG test data output TDO, analog input AN11 and Parallel Master Port address PMA12. |
| 25 | VSS | power_in | Ground reference for logic and I/O pins; this pin must be connected at all times. |
| 26 | VDD | power_in | Positive supply for peripheral logic and I/O pins. |
| 27 | TCK/AN12/PMA11/RB12 | bidirectional | PORTB bit RB12 is a bidirectional I/O (ST), also used for JTAG test clock input TCK, analog input AN12 and Parallel Master Port address PMA11. |
| 28 | TDI/AN13/PMA10/RB13 | bidirectional | PORTB bit RB13 is a bidirectional I/O (ST), also used for JTAG test data input TDI, analog input AN13 and Parallel Master Port address PMA10. |
| 29 | AN14/C2RX/SCK4/U5TX/U2RTS/PMALH/PMA1/RB14 | bidirectional | PORTB bit RB14 is a bidirectional I/O (ST), also used for analog input AN14, CAN2 bus receive C2RX, SPI4 clock SCK4, UART5 TX, UART2 RTS, Parallel Master Port address latch PMALH and address PMA1. |
| 30 | AN15/EMDC/AEMDC/OCFB/PMALL/PMA0/CN12/RB15 | bidirectional | PORTB bit RB15 is a bidirectional I/O (ST), also used for analog input AN15, Ethernet management clock EMDC, Output Compare Fault B input OCFB, Parallel Master Port address latch PMALL, address PMA0 and change notice CN12. |
| 31 | AC1TX/SDA5/SDI4/U2RX/PMA9/CN17/RF4 | bidirectional | PORTF bit RF4 is a bidirectional I/O (ST), also used for alternate CAN1 bus transmit AC1TX, I2C5 data SDA5, SPI4 data input SDI4, UART2 RX, Parallel Master Port address PMA9 and change notice CN17. |
| 32 | AC1RX/SCL5/SDO4/U2TX/PMA8/CN18/RF5 | bidirectional | PORTF bit RF5 is a bidirectional I/O (ST), also used for alternate CAN1 bus receive AC1RX, I2C5 clock SCL5, SPI4 data output SDO4, UART2 TX, Parallel Master Port address PMA8 and change notice CN18. |
| 33 | USBID/RF3 | bidirectional | PORTF bit RF3 is a bidirectional I/O (ST), also used as the USB OTG ID detect input USBID. |
| 34 | VBUS | power_in | Analog input for USB bus power monitoring. |
| 35 | VUSB3V3 | power_in | USB internal transceiver supply; if the USB module is not used, this pin must be connected to VDD. |
| 36 | D-/RG3 | bidirectional | USB D- differential data line (analog I/O), which is also PORTG input pin RG3. |
| 37 | D+/RG2 | bidirectional | USB D+ differential data line (analog I/O), which is also PORTG input pin RG2. |
| 38 | VDD | power_in | Positive supply for peripheral logic and I/O pins. |
| 39 | OSC1/CLKI/RC12 | bidirectional | Oscillator crystal input (ST buffer in RC mode, CMOS otherwise) that is also the external clock source input CLKI; PORTC bit RC12. |
| 40 | OSC2/CLKO/RC15 | bidirectional | Oscillator crystal output that connects to a crystal or resonator and optionally functions as CLKO in RC and EC modes; PORTC bit RC15. |
| 41 | VSS | power_in | Ground reference for logic and I/O pins; this pin must be connected at all times. |
| 42 | RTCC/AERXD1/ETXD3/IC1/INT1/RD8 | bidirectional | PORTD bit RD8 is a bidirectional I/O (ST), also used for RTCC alarm output, Ethernet transmit data ETXD3, alternate Ethernet receive data AERXD1, Input Capture 1 IC1 and external interrupt INT1. |
| 43 | AERXD0/ETXD2/SS3/U4RX/U1CTS/SDA1/IC2/INT2/RD9 | bidirectional | PORTD bit RD9 is a bidirectional I/O (ST), also used for alternate Ethernet receive data AERXD0, Ethernet transmit data ETXD2, SPI3 slave select SS3, UART4 RX, UART1 CTS, I2C1 data SDA1, Input Capture 2 IC2 and external interrupt INT2. |
| 44 | ECOL/AECRSDV/SCL1/IC3/PMCS2/PMA15/INT3/RD10 | bidirectional | PORTD bit RD10 is a bidirectional I/O (ST), also used for Ethernet collision detect ECOL, alternate Ethernet carrier sense data valid AECRSDV, I2C1 clock SCL1, Input Capture 3 IC3, Parallel Master Port chip select 2 PMCS2, address PMA15 and external interrupt INT3. |
| 45 | ECRS/AEREFCLK/IC4/PMCS1/PMA14/INT4/RD11 | bidirectional | PORTD bit RD11 is a bidirectional I/O (ST), also used for Ethernet carrier sense ECRS, alternate Ethernet reference clock AEREFCLK, Input Capture 4 IC4, Parallel Master Port chip select 1 PMCS1, address PMA14 and external interrupt INT4. |
| 46 | OC1/INT0/RD0 | bidirectional | PORTD bit RD0 is a bidirectional I/O (ST), also used as Output Compare 1 output OC1 and external interrupt INT0. |
| 47 | SOSCI/CN1/RC13 | bidirectional | PORTC bit RC13 is a bidirectional I/O (ST), also used as the 32.768 kHz low-power secondary oscillator crystal input SOSCI and change notice CN1. |
| 48 | SOSCO/T1CK/CN0/RC14 | bidirectional | PORTC bit RC14 is a bidirectional I/O (ST), also used as the 32.768 kHz low-power secondary oscillator crystal output SOSCO, Timer1 external clock input T1CK and change notice CN0. |
| 49 | EMDIO/AEMDIO/SCK3/U4TX/U1RTS/OC2/RD1 | bidirectional | PORTD bit RD1 is a bidirectional I/O (ST), also used for Ethernet management data EMDIO, alternate Ethernet management data AEMDIO, SPI3 clock SCK3, UART4 TX, UART1 RTS and Output Compare 2 output OC2. |
| 50 | SDA3/SDI3/U1RX/OC3/RD2 | bidirectional | PORTD bit RD2 is a bidirectional I/O (ST), also used for I2C3 data SDA3, SPI3 data input SDI3, UART1 RX and Output Compare 3 output OC3. |
| 51 | SCL3/SDO3/U1TX/OC4/RD3 | bidirectional | PORTD bit RD3 is a bidirectional I/O (ST), also used for I2C3 clock SCL3, SPI3 data output SDO3, UART1 TX and Output Compare 4 output OC4. |
| 52 | OC5/IC5/PMWR/CN13/RD4 | bidirectional | PORTD bit RD4 is a bidirectional I/O (ST), also used for Output Compare 5 output OC5, Input Capture 5 IC5, Parallel Master Port write strobe PMWR and change notice CN13. |
| 53 | PMRD/CN14/RD5 | bidirectional | PORTD bit RD5 is a bidirectional I/O (ST), also used for the Parallel Master Port read strobe PMRD and change notice CN14. |
| 54 | AETXEN/ETXERR/CN15/RD6 | bidirectional | PORTD bit RD6 is a bidirectional I/O (ST), also used for alternate Ethernet transmit enable AETXEN, Ethernet transmit error ETXERR and change notice CN15. |
| 55 | ETXCLK/AERXERR/CN16/RD7 | bidirectional | PORTD bit RD7 is a bidirectional I/O (ST), also used for Ethernet transmit clock ETXCLK, alternate Ethernet receive error AERXERR and change notice CN16. |
| 56 | VCAP | passive | Capacitor connection for the internal voltage regulator; it must not be connected to VDD and requires a CEFC capacitor of at least 6V rated, connected to ground. |
| 57 | VDD | power_in | Positive supply for peripheral logic and I/O pins. |
| 58 | C1RX/AETXD1/ERXD3/RF0 | bidirectional | PORTF bit RF0 is a bidirectional I/O (ST), also used for CAN1 bus receive C1RX, alternate Ethernet transmit data AETXD1 and Ethernet receive data ERXD3. |
| 59 | C1TX/AETXD0/ERXD2/RF1 | bidirectional | PORTF bit RF1 is a bidirectional I/O (ST), also used for CAN1 bus transmit C1TX, alternate Ethernet transmit data AETXD0 and Ethernet receive data ERXD2. |
| 60 | ERXD1/PMD0/RE0 | bidirectional | PORTE bit RE0 is a bidirectional I/O (ST), also used for Ethernet receive data ERXD1 and Parallel Master Port data PMD0. |
| 61 | ERXD0/PMD1/RE1 | bidirectional | PORTE bit RE1 is a bidirectional I/O (ST), also used for Ethernet receive data ERXD0 and Parallel Master Port data PMD1. |
| 62 | ERXDV/ECRSDV/PMD2/RE2 | bidirectional | PORTE bit RE2 is a bidirectional I/O (ST), also used for Ethernet receive data valid ERXDV, Ethernet carrier sense data valid ECRSDV and Parallel Master Port data PMD2. |
| 63 | ERXCLK/EREFCLK/PMD3/RE3 | bidirectional | PORTE bit RE3 is a bidirectional I/O (ST), also used for Ethernet receive clock ERXCLK, Ethernet reference clock EREFCLK and Parallel Master Port data PMD3. |
| 64 | ERXERR/PMD4/RE4 | bidirectional | PORTE bit RE4 is a bidirectional I/O (ST), also used for Ethernet receive error ERXERR and Parallel Master Port data PMD4. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | TQFP-64(10x10) |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 64 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating voltage range | 2.3 | 3.6 | V | 1 | |||
| Operating temperature range | -40 | 105 | ºC | 1 | |||
| Maximum operating frequency (CPU clock) | 0 | 80 | MHz | 1 |
CAD (KiCad official)
- Symbol:
PIC32MX795F512H-80V - Footprint:
Package_QFP:TQFP-64_10x10mm_P0.5mm - 3D model: TQFP-64(10x10) (KiCad packages3D, STEP)
- 3D model files:
pic32mx795f512h-80v-pt-etched.step/pic32mx795f512h-80v-pt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic32mx795f512h-80v-pt.step/pic32mx795f512h-80v-pt.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheetDatasheet_DS60001156K.pdf) (446 pp, sha256
2413ac5834b12306, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).