Generated by kicad-footprint-generator · KiCad file format 20260206
PIC32MX675F256H-80I
Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · TQFP-64(10x10)
PIC32MX675F256H-80I from Microchip Tech, in a TQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | ETXEN/PMD5/RE5 | bidirectional | PORTE bidirectional I/O pin, also Ethernet transmit enable ETXEN and Parallel Master Port data PMD5. |
| 2 | ETXD0/PMD6/RE6 | bidirectional | PORTE bidirectional I/O pin, also Ethernet transmit data 0 ETXD0 and Parallel Master Port data PMD6. |
| 3 | ETXD1/PMD7/RE7 | bidirectional | PORTE bidirectional I/O pin, also Ethernet transmit data 1 ETXD1 and Parallel Master Port data PMD7. |
| 4 | SCK2/U6TX/U3RTS/PMA5/CN8/RG6 | bidirectional | PORTG bidirectional I/O pin, also SPI2 serial clock SCK2, UART6 transmit and change notice input CN8. |
| 5 | SDA4/SDI2/U3RX/PMA4/CN9/RG7 | bidirectional | PORTG bidirectional I/O pin, also I2C4 serial data SDA4, SPI2 data in SDI2 and UART3 receive. |
| 6 | SCL4/SDO2/U3TX/PMA3/CN10/RG8 | bidirectional | PORTG bidirectional I/O pin, also I2C4 serial clock SCL4, SPI2 data out SDO2 and UART3 transmit. |
| 7 | MCLR | input | Master Clear (Reset) input; an active-low Reset to the device. |
| 8 | SS2/U6RX/U3CTS/PMA2/CN11/RG9 | bidirectional | PORTG bidirectional I/O pin, also SPI2 slave select SS2, UART6 receive and UART3 clear to send. |
| 9 | VSS | power_in | Ground reference for logic and I/O pins; must be connected at all times. |
| 10 | VDD | power_in | Positive supply for peripheral logic and I/O pins. |
| 11 | AN5/C1IN+/VBUSON/CN7/RB5 | input | Analog input AN5 and comparator 1 positive input C1IN+, also USB host/OTG bus power control output VBUSON on PORTB. |
| 12 | AN4/C1IN-/CN6/RB4 | input | Analog input AN4 and comparator 1 negative input C1IN-, on PORTB. |
| 13 | AN3/C2IN+/CN5/RB3 | input | Analog input AN3 and comparator 2 positive input C2IN+, on PORTB. |
| 14 | AN2/C2IN-/CN4/RB2 | input | Analog input AN2 and comparator 2 negative input C2IN-, on PORTB. |
| 15 | PGEC1/AN1/VREF-/CVREF-/CN3/RB1 | input | Analog input AN1 and programming clock PGEC1, also analog voltage reference low input VREF-. |
| 16 | PGED1/AN0/VREF+/CVREF+/PMA6/CN2/RB0 | bidirectional | Analog input AN0 and programming data PGED1, also analog voltage reference high input VREF+. |
| 17 | PGEC2/AN6/OCFA/RB6 | input | Analog input AN6 and programming clock PGEC2, also Output Compare Fault A input OCFA. |
| 18 | PGED2/AN7/RB7 | bidirectional | Analog input AN7 and programming data PGED2, on PORTB. |
| 19 | AVDD | power_in | Positive supply for analog modules; must be connected at all times. |
| 20 | AVSS | power_in | Ground reference for analog modules; must be connected at all times. |
| 21 | AN8/SS4/U5RX/U2CTS/C1OUT/RB8 | bidirectional | Analog input AN8, also SPI4 slave select SS4, UART5 receive and comparator 1 output C1OUT, on PORTB. |
| 22 | AN9/C2OUT/PMA7/RB9 | bidirectional | Analog input AN9 and comparator 2 output C2OUT, on PORTB. |
| 23 | TMS/AN10/CVREFOUT/PMA13/RB10 | input | JTAG test mode select input TMS, also analog input AN10 and comparator voltage reference output CVREFOUT. |
| 24 | TDO/AN11/PMA12/RB11 | output | JTAG test data output TDO, also analog input AN11 on PORTB. |
| 25 | VSS | power_in | Ground reference for logic and I/O pins; must be connected at all times. |
| 26 | VDD | power_in | Positive supply for peripheral logic and I/O pins. |
| 27 | TCK/AN12/PMA11/RB12 | input | JTAG test clock input TCK, also analog input AN12 on PORTB. |
| 28 | TDI/AN13/PMA10/RB13 | input | JTAG test data input TDI, also analog input AN13 on PORTB. |
| 29 | AN14/SCK4/U5TX/U2RTS/PMALH/PMA1/RB14 | bidirectional | Analog input AN14, also SPI4 serial clock SCK4 and PMP address latch enable high byte PMALH, on PORTB. |
| 30 | AN15/EMDC/AEMDC/OCFB/PMALL/PMA0/CN12/RB15 | bidirectional | Analog input AN15, also Ethernet management clock EMDC, Output Compare Fault B input OCFB and PMP address latch enable low byte PMALL. |
| 31 | SDA5/SDI4/U2RX/PMA9/CN17/RF4 | bidirectional | PORTF bidirectional I/O pin, also I2C5 serial data SDA5, SPI4 data in SDI4 and UART2 receive. |
| 32 | SCL5/SDO4/U2TX/PMA8/CN18/RF5 | bidirectional | PORTF bidirectional I/O pin, also I2C5 serial clock SCL5, SPI4 data out SDO4 and UART2 transmit. |
| 33 | USBID/RF3 | input | USB OTG ID detect input, also PORTF pin RF3. |
| 34 | VBUS | power_in | USB bus power monitor input. |
| 35 | VUSB3V3 | power_in | USB internal transceiver supply; if the USB module is not used, this pin must be connected to VDD. |
| 36 | D-/RG3 | bidirectional | USB D- data line, also PORTG input pin RG3. |
| 37 | D+/RG2 | bidirectional | USB D+ data line, also PORTG input pin RG2. |
| 38 | VDD | power_in | Positive supply for peripheral logic and I/O pins. |
| 39 | OSC1/CLKI/RC12 | input | Oscillator crystal input OSC1, also external clock source input CLKI, on PORTC pin RC12. |
| 40 | OSC2/CLKO/RC15 | bidirectional | Oscillator crystal output OSC2, optionally CLKO in RC and EC modes, on PORTC pin RC15. |
| 41 | Vss | power_in | Ground reference for logic and I/O pins; must be connected at all times. |
| 42 | RTCC/AERXD1/ETXD3/IC1/INT1/RD8 | bidirectional | Real-Time Clock alarm output RTCC, also Input Capture 1, External Interrupt 1 and PORTD pin RD8. |
| 43 | AERXD0/ETXD2/SS3/U4RX/U1CTS/SDA1/IC2/INT2/RD9 | bidirectional | PORTD pin RD9, also SPI3 slave select SS3, I2C1 serial data SDA1, Input Capture 2 and External Interrupt 2. |
| 44 | ECOL/AECRSDV/SCL1/IC3/PMCS2/PMA15/INT3/RD10 | bidirectional | PORTD pin RD10, also I2C1 serial clock SCL1, Input Capture 3, PMP chip select 2 PMCS2 and External Interrupt 3. |
| 45 | ECRS/AEREFCLK/IC4/PMCS1/PMA14/INT4/RD11 | bidirectional | PORTD pin RD11, also Input Capture 4, PMP chip select 1 PMCS1 and External Interrupt 4. |
| 46 | OC1/INT0/RD0 | bidirectional | Output Compare 1 output OC1, also External Interrupt 0 and PORTD pin RD0. |
| 47 | SOSCI/CN1/RC13 | input | 32.768 kHz low-power oscillator crystal input SOSCI, also PORTC pin RC13 and change notice input CN1. |
| 48 | SOSCO/T1CK/CN0/RC14 | bidirectional | 32.768 kHz low-power oscillator crystal output SOSCO, also Timer1 external clock T1CK and PORTC pin RC14. |
| 49 | EMDIO/AEMDIO/SCK3/U4TX/U1RTS/OC2/RD1 | bidirectional | PORTD pin RD1, also Ethernet management data EMDIO, SPI3 serial clock SCK3 and Output Compare 2 output OC2. |
| 50 | SDA3/SDI3/U1RX/OC3/RD2 | bidirectional | PORTD pin RD2, also I2C3 serial data SDA3, SPI3 data in SDI3 and Output Compare 3 output OC3. |
| 51 | SCL3/SDO3/U1TX/OC4/RD3 | bidirectional | PORTD pin RD3, also I2C3 serial clock SCL3, SPI3 data out SDO3 and Output Compare 4 output OC4. |
| 52 | OC5/IC5/PMWR/CN13/RD4 | bidirectional | PORTD pin RD4, also Output Compare 5 output OC5, Input Capture 5 and Parallel Master Port write strobe PMWR. |
| 53 | PMRD/CN14/RD5 | bidirectional | PORTD pin RD5, also Parallel Master Port read strobe PMRD and change notice input CN14. |
| 54 | AETXEN/ETXERR/CN15/RD6 | bidirectional | PORTD pin RD6, also alternate Ethernet transmit enable AETXEN and change notice input CN15. |
| 55 | ETXCLK/AERXERR/CN16/RD7 | bidirectional | PORTD pin RD7, also Ethernet transmit clock ETXCLK and change notice input CN16. |
| 56 | VCAP | passive | Capacitor for Internal Voltage Regulator; must not be connected to VDD and needs a low-ESR (1 ohm) capacitor with at least a 6V rating to ground. |
| 57 | VDD | power_in | Positive supply for peripheral logic and I/O pins. |
| 58 | AETXD1/ERXD3/RF0 | bidirectional | PORTF pin RF0, also alternate Ethernet transmit data 1 AETXD1 and Ethernet receive data 3 ERXD3. |
| 59 | AETXD0/ERXD2/RF1 | bidirectional | PORTF pin RF1, also alternate Ethernet transmit data 0 AETXD0 and Ethernet receive data 2 ERXD2. |
| 60 | ERXD1/PMD0/RE0 | bidirectional | PORTE pin RE0, also Ethernet receive data 1 ERXD1 and Parallel Master Port data PMD0. |
| 61 | ERXD0/PMD1/RE1 | bidirectional | PORTE pin RE1, also Ethernet receive data 0 ERXD0 and Parallel Master Port data PMD1. |
| 62 | ERXDV/ECRSDV/PMD2/RE2 | bidirectional | PORTE pin RE2, also Ethernet receive data valid ERXDV and Parallel Master Port data PMD2. |
| 63 | ERXCLK/EREFCLK/PMD3/RE3 | bidirectional | PORTE pin RE3, also Ethernet receive clock ERXCLK and Parallel Master Port data PMD3. |
| 64 | ERXERR/PMD4/RE4 | bidirectional | PORTE pin RE4, also Ethernet receive error input ERXERR and Parallel Master Port data PMD4. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | TQFP-64(10x10) |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 64 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Ambient temperature under bias | -40 | 105 | °C | 355 | |||
| Storage temperature | -65 | 150 | °C | 355 | |||
| Voltage on VDD with respect to VSS | VDD | -0.3 | 4 | V | 355 | ||
| Voltage on any pin that is not 5V tolerant with respect to VSS | -0.3 | V | Max printed as VDD + 0.3V (Note 3) | 355 | |||
| Voltage on any 5V tolerant pin with respect to VSS when VDD ≥ 2.3V | -0.3 | 5.5 | V | VDD ≥ 2.3V (Note 3) | 355 | ||
| Voltage on any 5V tolerant pin with respect to VSS when VDD < 2.3V | -0.3 | 3.6 | V | VDD < 2.3V (Note 3) | 355 | ||
| Voltage on VBUS with respect to VSS | VBUS | -0.3 | 5.5 | V | 355 | ||
| Operating temperature (Industrial) | TA | -40 | 85 | °C | Industrial, -40°C ≤ TA ≤ +85°C | 357 | |
| Supply voltage | DC10 VDD | 2.3 | 3.6 | V | 357 | ||
| RAM data retention voltage | DC12 VDR | 1.75 | V | 357 | |||
| VDD start voltage to ensure internal Power-on Reset signal | DC16 VPOR | 1.75 | 2.1 | V | 357 | ||
| VDD rise rate to ensure internal Power-on Reset signal | DC17 SVDD | 5e-05 | 0.115 | V/s | 357 | ||
| CPU clock frequency | 80 | MHz | 1 | ||||
| VCAP filter capacitor (CEFC) | CEFC | 10 | µF | Tantalum or ceramic, placed close to VCAP pin | 347 |
CAD (KiCad official)
- Symbol:
PIC32MX675F256H-80I - Footprint:
Package_QFP:TQFP-64_10x10mm_P0.5mm - 3D model: TQFP-64(10x10) (KiCad packages3D, STEP)
- 3D model files:
pic32mx675f256h-80i-etched.step/pic32mx675f256h-80i-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic32mx675f256h-80i.step/pic32mx675f256h-80i.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheetDatasheet_DS60001156K.pdf) (446 pp, sha256
2413ac5834b12306, retrieved 2026-10-28, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).