Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

PIC32MX675F256H-80I

Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · TQFP-64(10x10)

PIC32MX675F256H-80I from Microchip Tech, in a TQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 ETXEN/PMD5/RE5 bidirectional PORTE bidirectional I/O pin, also Ethernet transmit enable ETXEN and Parallel Master Port data PMD5.
2 ETXD0/PMD6/RE6 bidirectional PORTE bidirectional I/O pin, also Ethernet transmit data 0 ETXD0 and Parallel Master Port data PMD6.
3 ETXD1/PMD7/RE7 bidirectional PORTE bidirectional I/O pin, also Ethernet transmit data 1 ETXD1 and Parallel Master Port data PMD7.
4 SCK2/U6TX/U3RTS/PMA5/CN8/RG6 bidirectional PORTG bidirectional I/O pin, also SPI2 serial clock SCK2, UART6 transmit and change notice input CN8.
5 SDA4/SDI2/U3RX/PMA4/CN9/RG7 bidirectional PORTG bidirectional I/O pin, also I2C4 serial data SDA4, SPI2 data in SDI2 and UART3 receive.
6 SCL4/SDO2/U3TX/PMA3/CN10/RG8 bidirectional PORTG bidirectional I/O pin, also I2C4 serial clock SCL4, SPI2 data out SDO2 and UART3 transmit.
7 MCLR input Master Clear (Reset) input; an active-low Reset to the device.
8 SS2/U6RX/U3CTS/PMA2/CN11/RG9 bidirectional PORTG bidirectional I/O pin, also SPI2 slave select SS2, UART6 receive and UART3 clear to send.
9 VSS power_in Ground reference for logic and I/O pins; must be connected at all times.
10 VDD power_in Positive supply for peripheral logic and I/O pins.
11 AN5/C1IN+/VBUSON/CN7/RB5 input Analog input AN5 and comparator 1 positive input C1IN+, also USB host/OTG bus power control output VBUSON on PORTB.
12 AN4/C1IN-/CN6/RB4 input Analog input AN4 and comparator 1 negative input C1IN-, on PORTB.
13 AN3/C2IN+/CN5/RB3 input Analog input AN3 and comparator 2 positive input C2IN+, on PORTB.
14 AN2/C2IN-/CN4/RB2 input Analog input AN2 and comparator 2 negative input C2IN-, on PORTB.
15 PGEC1/AN1/VREF-/CVREF-/CN3/RB1 input Analog input AN1 and programming clock PGEC1, also analog voltage reference low input VREF-.
16 PGED1/AN0/VREF+/CVREF+/PMA6/CN2/RB0 bidirectional Analog input AN0 and programming data PGED1, also analog voltage reference high input VREF+.
17 PGEC2/AN6/OCFA/RB6 input Analog input AN6 and programming clock PGEC2, also Output Compare Fault A input OCFA.
18 PGED2/AN7/RB7 bidirectional Analog input AN7 and programming data PGED2, on PORTB.
19 AVDD power_in Positive supply for analog modules; must be connected at all times.
20 AVSS power_in Ground reference for analog modules; must be connected at all times.
21 AN8/SS4/U5RX/U2CTS/C1OUT/RB8 bidirectional Analog input AN8, also SPI4 slave select SS4, UART5 receive and comparator 1 output C1OUT, on PORTB.
22 AN9/C2OUT/PMA7/RB9 bidirectional Analog input AN9 and comparator 2 output C2OUT, on PORTB.
23 TMS/AN10/CVREFOUT/PMA13/RB10 input JTAG test mode select input TMS, also analog input AN10 and comparator voltage reference output CVREFOUT.
24 TDO/AN11/PMA12/RB11 output JTAG test data output TDO, also analog input AN11 on PORTB.
25 VSS power_in Ground reference for logic and I/O pins; must be connected at all times.
26 VDD power_in Positive supply for peripheral logic and I/O pins.
27 TCK/AN12/PMA11/RB12 input JTAG test clock input TCK, also analog input AN12 on PORTB.
28 TDI/AN13/PMA10/RB13 input JTAG test data input TDI, also analog input AN13 on PORTB.
29 AN14/SCK4/U5TX/U2RTS/PMALH/PMA1/RB14 bidirectional Analog input AN14, also SPI4 serial clock SCK4 and PMP address latch enable high byte PMALH, on PORTB.
30 AN15/EMDC/AEMDC/OCFB/PMALL/PMA0/CN12/RB15 bidirectional Analog input AN15, also Ethernet management clock EMDC, Output Compare Fault B input OCFB and PMP address latch enable low byte PMALL.
31 SDA5/SDI4/U2RX/PMA9/CN17/RF4 bidirectional PORTF bidirectional I/O pin, also I2C5 serial data SDA5, SPI4 data in SDI4 and UART2 receive.
32 SCL5/SDO4/U2TX/PMA8/CN18/RF5 bidirectional PORTF bidirectional I/O pin, also I2C5 serial clock SCL5, SPI4 data out SDO4 and UART2 transmit.
33 USBID/RF3 input USB OTG ID detect input, also PORTF pin RF3.
34 VBUS power_in USB bus power monitor input.
35 VUSB3V3 power_in USB internal transceiver supply; if the USB module is not used, this pin must be connected to VDD.
36 D-/RG3 bidirectional USB D- data line, also PORTG input pin RG3.
37 D+/RG2 bidirectional USB D+ data line, also PORTG input pin RG2.
38 VDD power_in Positive supply for peripheral logic and I/O pins.
39 OSC1/CLKI/RC12 input Oscillator crystal input OSC1, also external clock source input CLKI, on PORTC pin RC12.
40 OSC2/CLKO/RC15 bidirectional Oscillator crystal output OSC2, optionally CLKO in RC and EC modes, on PORTC pin RC15.
41 Vss power_in Ground reference for logic and I/O pins; must be connected at all times.
42 RTCC/AERXD1/ETXD3/IC1/INT1/RD8 bidirectional Real-Time Clock alarm output RTCC, also Input Capture 1, External Interrupt 1 and PORTD pin RD8.
43 AERXD0/ETXD2/SS3/U4RX/U1CTS/SDA1/IC2/INT2/RD9 bidirectional PORTD pin RD9, also SPI3 slave select SS3, I2C1 serial data SDA1, Input Capture 2 and External Interrupt 2.
44 ECOL/AECRSDV/SCL1/IC3/PMCS2/PMA15/INT3/RD10 bidirectional PORTD pin RD10, also I2C1 serial clock SCL1, Input Capture 3, PMP chip select 2 PMCS2 and External Interrupt 3.
45 ECRS/AEREFCLK/IC4/PMCS1/PMA14/INT4/RD11 bidirectional PORTD pin RD11, also Input Capture 4, PMP chip select 1 PMCS1 and External Interrupt 4.
46 OC1/INT0/RD0 bidirectional Output Compare 1 output OC1, also External Interrupt 0 and PORTD pin RD0.
47 SOSCI/CN1/RC13 input 32.768 kHz low-power oscillator crystal input SOSCI, also PORTC pin RC13 and change notice input CN1.
48 SOSCO/T1CK/CN0/RC14 bidirectional 32.768 kHz low-power oscillator crystal output SOSCO, also Timer1 external clock T1CK and PORTC pin RC14.
49 EMDIO/AEMDIO/SCK3/U4TX/U1RTS/OC2/RD1 bidirectional PORTD pin RD1, also Ethernet management data EMDIO, SPI3 serial clock SCK3 and Output Compare 2 output OC2.
50 SDA3/SDI3/U1RX/OC3/RD2 bidirectional PORTD pin RD2, also I2C3 serial data SDA3, SPI3 data in SDI3 and Output Compare 3 output OC3.
51 SCL3/SDO3/U1TX/OC4/RD3 bidirectional PORTD pin RD3, also I2C3 serial clock SCL3, SPI3 data out SDO3 and Output Compare 4 output OC4.
52 OC5/IC5/PMWR/CN13/RD4 bidirectional PORTD pin RD4, also Output Compare 5 output OC5, Input Capture 5 and Parallel Master Port write strobe PMWR.
53 PMRD/CN14/RD5 bidirectional PORTD pin RD5, also Parallel Master Port read strobe PMRD and change notice input CN14.
54 AETXEN/ETXERR/CN15/RD6 bidirectional PORTD pin RD6, also alternate Ethernet transmit enable AETXEN and change notice input CN15.
55 ETXCLK/AERXERR/CN16/RD7 bidirectional PORTD pin RD7, also Ethernet transmit clock ETXCLK and change notice input CN16.
56 VCAP passive Capacitor for Internal Voltage Regulator; must not be connected to VDD and needs a low-ESR (1 ohm) capacitor with at least a 6V rating to ground.
57 VDD power_in Positive supply for peripheral logic and I/O pins.
58 AETXD1/ERXD3/RF0 bidirectional PORTF pin RF0, also alternate Ethernet transmit data 1 AETXD1 and Ethernet receive data 3 ERXD3.
59 AETXD0/ERXD2/RF1 bidirectional PORTF pin RF1, also alternate Ethernet transmit data 0 AETXD0 and Ethernet receive data 2 ERXD2.
60 ERXD1/PMD0/RE0 bidirectional PORTE pin RE0, also Ethernet receive data 1 ERXD1 and Parallel Master Port data PMD0.
61 ERXD0/PMD1/RE1 bidirectional PORTE pin RE1, also Ethernet receive data 0 ERXD0 and Parallel Master Port data PMD1.
62 ERXDV/ECRSDV/PMD2/RE2 bidirectional PORTE pin RE2, also Ethernet receive data valid ERXDV and Parallel Master Port data PMD2.
63 ERXCLK/EREFCLK/PMD3/RE3 bidirectional PORTE pin RE3, also Ethernet receive clock ERXCLK and Parallel Master Port data PMD3.
64 ERXERR/PMD4/RE4 bidirectional PORTE pin RE4, also Ethernet receive error input ERXERR and Parallel Master Port data PMD4.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package TQFP-64(10x10)
Category Single Chip Microcomputer/Microcontroller
Pins 64

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Ambient temperature under bias -40 105 °C 355
Storage temperature -65 150 °C 355
Voltage on VDD with respect to VSS VDD -0.3 4 V 355
Voltage on any pin that is not 5V tolerant with respect to VSS -0.3 V Max printed as VDD + 0.3V (Note 3) 355
Voltage on any 5V tolerant pin with respect to VSS when VDD ≥ 2.3V -0.3 5.5 V VDD ≥ 2.3V (Note 3) 355
Voltage on any 5V tolerant pin with respect to VSS when VDD < 2.3V -0.3 3.6 V VDD < 2.3V (Note 3) 355
Voltage on VBUS with respect to VSS VBUS -0.3 5.5 V 355
Operating temperature (Industrial) TA -40 85 °C Industrial, -40°C ≤ TA ≤ +85°C 357
Supply voltage DC10 VDD 2.3 3.6 V 357
RAM data retention voltage DC12 VDR 1.75 V 357
VDD start voltage to ensure internal Power-on Reset signal DC16 VPOR 1.75 2.1 V 357
VDD rise rate to ensure internal Power-on Reset signal DC17 SVDD 5e-05 0.115 V/s 357
CPU clock frequency 80 MHz 1
VCAP filter capacitor (CEFC) CEFC 10 µF Tantalum or ceramic, placed close to VCAP pin 347

CAD (KiCad official)

  • Symbol: PIC32MX675F256H-80I
  • Footprint: Package_QFP:TQFP-64_10x10mm_P0.5mm
  • 3D model: TQFP-64(10x10) (KiCad packages3D, STEP)
  • 3D model files: pic32mx675f256h-80i-etched.step / pic32mx675f256h-80i-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pic32mx675f256h-80i.step / pic32mx675f256h-80i.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheetDatasheet_DS60001156K.pdf) (446 pp, sha256 2413ac5834b12306, retrieved 2026-10-28, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF