main
Ray Publish 0.1.0 212e9b1

PIC32MK0512GPE100-I

Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · TQFP-100(12x12)

PIC32MK0512GPE100-I from Microchip Tech, in a TQFP-100(12x12). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 AN23/CVD23/PMA23/RG15 bidirectional PORTG I/O RG15 (ST buffer) multiplexed with analog input AN23, CVD23 capacitive touch assist and PMP address PMA23.
2 VDD power_in Positive supply for peripheral logic and I/O pins; must be connected at all times.
3 TCK/RPA7/PMD5/RA7 bidirectional JTAG test clock input TCK, also PORTA I/O RA7 (ST buffer), remappable RPA7 and PMP data PMD5.
4 RPB14/VBUSON1/PMD6/RB14 bidirectional PORTB I/O RB14 (ST buffer) multiplexed with USB1 VBUS power control output VBUSON1, PMD6 and remappable RPB14.
5 RPB15/PMD7/RB15 bidirectional PORTB I/O RB15 (ST buffer) multiplexed with PMP data PMD7 and remappable RPB15.
6 RD1 bidirectional PORTD I/O RD1 (ST buffer) on a 100-pin device.
7 RD2 bidirectional PORTD I/O RD2 (ST buffer) on a 100-pin device.
8 RPD3/RD3 bidirectional PORTD I/O RD3 (ST buffer) with remappable RPD3 pin function.
9 RPD4/RD4 bidirectional PORTD I/O RD4 (ST buffer) with remappable RPD4 pin function.
10 AN19/CVD19/RPG6/VBUSON2/PMA5/RG6 bidirectional PORTG I/O RG6 (ST buffer) multiplexed with analog input AN19, CVD19, USB2 VBUS control VBUSON2 and PMA5.
11 AN18/CVD18/RPG7/SCL1/PMA4/RG7(5) bidirectional PORTG I/O RG7 (ST buffer) multiplexed with analog input AN18, CVD18, I2C clock SCL1 (per footnote 5) and PMA4.
12 AN17/CVD17/RPG8/SDA1/PMA3/RG8(6) bidirectional PORTG I/O RG8 (ST buffer) multiplexed with analog input AN17, CVD17, I2C data SDA1 (per footnote 6) and PMA3.
13 MCLR input Master Clear input; active-low device Reset.
14 AN16/CVD16/RPG9/PMA2/RG9 bidirectional PORTG I/O RG9 (ST buffer) multiplexed with analog input AN16, CVD16 and PMA2.
15 VSS power_in Ground reference for logic, I/O pins and USB; must be connected at all times.
16 VDD power_in Positive supply for peripheral logic and I/O pins; must be connected at all times.
17 AN22/CVD22/RG10 bidirectional PORTG I/O RG10 (ST buffer) multiplexed with analog input AN22 and CVD22.
18 AN21/CVD21/RE8 bidirectional PORTE I/O RE8 (ST buffer) multiplexed with analog input AN21 and CVD21.
19 AN20/CVD20/RE9 bidirectional PORTE I/O RE9 (ST buffer) multiplexed with analog input AN20 and CVD20.
20 AN10/CVD10/RPA12/RA12 bidirectional PORTA I/O RA12 (ST buffer) multiplexed with analog input AN10, CVD10 and remappable RPA12.
21 AN9/CVD9/RPA11/RA11 bidirectional PORTA I/O RA11 (ST buffer) multiplexed with analog input AN9, CVD9 and remappable RPA11.
22 OA2OUT/AN0/C2IN4-/C4IN3-/RPA0/RA0 bidirectional PORTA I/O RA0 (ST buffer) multiplexed with Op amp 2 output OA2OUT, analog input AN0, comparator inputs and remappable RPA0.
23 OA2IN+/AN1/C2IN1+/RPA1/RA1 bidirectional PORTA I/O RA1 (ST buffer) multiplexed with Op amp 2 positive input OA2IN+, analog input AN1, comparator input and remappable RPA1.
24 PGD3/OA2IN-/AN2/C2IN1-/RPB0/CTED2/RB0 bidirectional PORTB I/O RB0 (ST buffer) multiplexed with PGD3 programming data, Op amp 2 negative input OA2IN-, analog input AN2 and CTMU edge input CTED2.
25 PGC3/OA1OUT/AN3/C1IN4-/C4IN2-/RPB1/CTED1/RB1 bidirectional PORTB I/O RB1 (ST buffer) multiplexed with PGC3 programming clock, Op amp 1 output OA1OUT, analog input AN3 and CTMU edge input CTED1.
26 PGC1/OA1IN+/AN4/C1IN1+/C1IN3-/C2IN3-/RPB2/RB2 bidirectional PORTB I/O RB2 (ST buffer) multiplexed with PGC1 programming clock, Op amp 1 positive input OA1IN+ and analog input AN4.
27 PGD1/OA1IN-/AN5/CTCMP/C1IN1-/RTCC/RPB3/RB3 bidirectional PORTB I/O RB3 (ST buffer) multiplexed with PGD1 programming data, Op amp 1 negative input OA1IN-, analog input AN5, CTMU external capacitor input CTCMP and RTCC alarm output.
28 VREF-/AN33/CVD33/PMA7/RF9 power_in Analog voltage reference (low) input VREF-; pin also PORTF I/O RF9 (ST buffer) with analog input AN33 and PMA7.
29 VREF+/AN34/CVD34/PMA6/RF10 power_in Analog voltage reference (high) input VREF+; pin also PORTF I/O RF10 (ST buffer) with analog input AN34 and PMA6.
30 AVDD power_in Positive supply for analog modules; must be connected at all times, even if the ADC is not used.
31 AVSS power_in Ground reference for analog modules; must be connected at all times, even if the ADC is not used.
32 OA3OUT/AN6/CVD6/C3IN4-/C4IN1+/C4IN4-/RPC0/RC0 bidirectional PORTC I/O RC0 (ST buffer) multiplexed with Op amp 3 output OA3OUT, analog input AN6, CVD6 and remappable RPC0.
33 OA3IN-/AN7/CVD7/C3IN1-/C4IN1-/RPC1/RC1 bidirectional PORTC I/O RC1 (ST buffer) multiplexed with Op amp 3 negative input OA3IN-, analog input AN7, CVD7 and remappable RPC1.
34 OA3IN+/AN8/CVD8/C3IN1+/C3IN3-/RPC2/PMA13/RC2 bidirectional PORTC I/O RC2 (ST buffer) multiplexed with Op amp 3 positive input OA3IN+, analog input AN8, CVD8 and PMA13.
35 AN11/CVD11/C1IN2-/PMA12/RC11 bidirectional PORTC I/O RC11 (ST buffer) multiplexed with analog input AN11, CVD11, comparator 1 input C1IN2- and PMA12.
36 VSS power_in Ground reference for logic, I/O pins and USB; must be connected at all times.
37 VDD power_in Positive supply for peripheral logic and I/O pins; must be connected at all times.
38 AN35/CVD35/RG11 bidirectional PORTG I/O RG11 (ST buffer) multiplexed with analog input AN35 and CVD35.
39 AN36/CVD36/RF13 bidirectional PORTF I/O RF13 (ST buffer) multiplexed with analog input AN36 and CVD36.
40 AN37/CVD37/RF12 bidirectional PORTF I/O RF12 (ST buffer) multiplexed with analog input AN37 and CVD37.
41 AN12/CVD12/C2IN2-/C5IN2-/SDA4/PMA11/RE12(6) bidirectional PORTE I/O RE12 (ST buffer) multiplexed with analog input AN12, CVD12, I2C data SDA4 (per footnote 6) and PMA11.
42 AN13/CVD13/C3IN2-/SCL4/PMA10/RE13(5) bidirectional PORTE I/O RE13 (ST buffer) multiplexed with analog input AN13, CVD13, I2C clock SCL4 (per footnote 5) and PMA10.
43 AN14/CVD14/RPE14/PMA1/RE14 bidirectional PORTE I/O RE14 (ST buffer) multiplexed with analog input AN14, CVD14, remappable RPE14 and PMA1.
44 AN15/CVD15/RPE15/PMA0/RE15 bidirectional PORTE I/O RE15 (ST buffer) multiplexed with analog input AN15, CVD15, remappable RPE15 and PMA0.
45 VSS power_in Ground reference for logic, I/O pins and USB; must be connected at all times.
46 VDD power_in Positive supply for peripheral logic and I/O pins; must be connected at all times.
47 AN38/CVD38/RD14 bidirectional PORTD I/O RD14 (ST buffer) multiplexed with analog input AN38 and CVD38.
48 AN39/CVD39/RD15 bidirectional PORTD I/O RD15 (ST buffer) multiplexed with analog input AN39 and CVD39.
49 TDI/DAC3/AN26/CVD26/RPA8/SDA2/PMA9/RA8(6) bidirectional JTAG test data input TDI, also PORTA I/O RA8 (ST buffer) with CDAC3 output, analog input AN26, I2C data SDA2 (per footnote 6) and PMA9.
50 RPB4/SCL2/PMA8/RB4(5) bidirectional PORTB I/O RB4 (ST buffer) multiplexed with remappable RPB4, I2C clock SCL2 (per footnote 5) and PMA8.
51 OA5IN+/DAC1/AN24/CVD24/C5IN1+/C5IN3-/RPA4/T1CK/RA4 bidirectional PORTA I/O RA4 (ST buffer) multiplexed with Op amp 5 positive input OA5IN+, CDAC1 output, analog input AN24, Timer1 clock T1CK and remappable RPA4.
52 AN40/CVD40/RPE0/RE0 bidirectional PORTE I/O RE0 (ST buffer) multiplexed with analog input AN40, CVD40 and remappable RPE0.
53 AN41/CVD41/RPE1/RE1 bidirectional PORTE I/O RE1 (ST buffer) multiplexed with analog input AN41, CVD41 and remappable RPE1.
54 VBUS1 input USB1 bus power monitor input; tie to VSS if USB1 is not used.
55 VUSB3V3 power_in USB internal transceiver supply; this pin should be connected to VDD.
56 D1- bidirectional USB1 D- data line; connect through 10K to VSS if USB1 is not used.
57 D1+ bidirectional USB1 D+ data line; connect through 10K to VSS if USB1 is not used.
58 VBUS2 input USB2 bus power monitor input; tie to VSS if USB2 is not used.
59 D2- bidirectional USB2 D- data line; connect through 10K to VSS if USB2 is not used.
60 D2+ bidirectional USB2 D+ data line; connect through 10K to VSS if USB2 is not used.
61 AN45/CVD45/RF5 bidirectional PORTF I/O RF5 (ST buffer) multiplexed with analog input AN45 and CVD45.
62 VDD power_in Positive supply for peripheral logic and I/O pins; must be connected at all times.
63 OSCI/CLKI/AN49/CVD49/RPC12/RC12 input Oscillator crystal input OSC1 or external clock input CLKI (ST buffer), also PORTC I/O RC12, analog input AN49 and remappable RPC12.
64 OSCO/CLKO/RPC15/RC15 output Oscillator crystal output OSC2 or CLKO output, also PORTC I/O RC15 (ST buffer) and remappable RPC15.
65 VSS power_in Ground reference for logic, I/O pins and USB; must be connected at all times.
66 AN46/CVD46/RPA14/RA14 bidirectional PORTA I/O RA14 (ST buffer) multiplexed with analog input AN46, CVD46 and remappable RPA14.
67 AN47/CVD47/RPA15/RA15 bidirectional PORTA I/O RA15 (ST buffer) multiplexed with analog input AN47, CVD47 and remappable RPA15.
68 VBAT power_in Battery backup supply for selected peripherals; otherwise connect to VDD. Functionality is compromised per errata and it must be connected to VDD.
69 PGD2/RPB5/SDA3/USBID1/RB5(6) bidirectional PORTB I/O RB5 (ST buffer) multiplexed with PGD2 programming data, USB1 OTG ID detect USBID1, I2C data SDA3 (per footnote 6) and remappable RPB5.
70 PGC2/RPB6/SCL3/SCK2/PMA15/RB6(5) bidirectional PORTB I/O RB6 (ST buffer) multiplexed with PGC2 programming clock, SPI2 clock SCK2, I2C clock SCL3 (per footnote 5) and PMA15.
71 DAC2/AN48/CVD48/RPC10/PMA14/PMCS/RC10 bidirectional PORTC I/O RC10 (ST buffer) multiplexed with CDAC2 output, analog input AN48, CVD48, PMP chip select PMCS and PMA14.
72 OA5OUT/AN25/CVD25/C5IN4-/RPB7/SCK1/INT0/RB7 bidirectional PORTB I/O RB7 (ST buffer) multiplexed with Op amp 5 output OA5OUT, analog input AN25, SPI1 clock SCK1 and external interrupt INT0.
73 SOSCI/RPC13(4)/RC13(4) input 32.768 kHz secondary oscillator crystal input SOSCI; ST/CMOS buffer, restricted to input functions per footnote 4.
74 SOSCO/RPB8(4)/RB8(4) output 32.768 kHz secondary oscillator crystal output SOSCO; CMOS buffer.
75 VSS power_in Ground reference for logic, I/O pins and USB; must be connected at all times.
76 TMS/OA5IN-/AN27/CVD27/LVDIN/C5IN1-/RPB9/RB9 bidirectional JTAG test mode select TMS, also PORTB I/O RB9 (ST buffer), Op amp 5 negative input OA5IN-, analog input AN27 and LVDIN as printed.
77 RPC6/USBID2/PMA16/RC6 bidirectional PORTC I/O RC6 (ST buffer) multiplexed with remappable RPC6, USB2 OTG ID detect USBID2 and PMA16.
78 RPC7/PMA17/RC7 bidirectional PORTC I/O RC7 (ST buffer) multiplexed with remappable RPC7 and PMA17.
79 PMD12/RD12 bidirectional PORTD I/O RD12 (ST buffer) multiplexed with PMP data PMD12.
80 PMD13/RD13 bidirectional PORTD I/O RD13 (ST buffer) multiplexed with PMP data PMD13.
81 RPC8/PMWR/RC8 bidirectional PORTC I/O RC8 (ST buffer) multiplexed with remappable RPC8 and PMP write strobe PMWR.
82 RPD5/PMRD/RD5 bidirectional PORTD I/O RD5 (ST buffer) multiplexed with remappable RPD5 and PMP read strobe PMRD.
83 RPD6/PMD14/RD6 bidirectional PORTD I/O RD6 (ST buffer) multiplexed with remappable RPD6 and PMP data PMD14.
84 RPC9/PMD15/RC9 bidirectional PORTC I/O RC9 (ST buffer) multiplexed with remappable RPC9 and PMP data PMD15.
85 VSS power_in Ground reference for logic, I/O pins and USB; must be connected at all times.
86 VDD power_in Positive supply for peripheral logic and I/O pins; must be connected at all times.
87 RPF0/PMD11/RF0 bidirectional PORTF I/O RF0 (ST buffer) multiplexed with remappable RPF0 and PMP data PMD11.
88 RPF1/PMD10/RF1 bidirectional PORTF I/O RF1 (ST buffer) multiplexed with remappable RPF1 and PMP data PMD10.
89 RPG1/PMD9/RG1 bidirectional PORTG I/O RG1 (ST buffer) multiplexed with remappable RPG1 and PMP data PMD9.
90 RPG0/PMD8/RG0 bidirectional PORTG I/O RG0 (ST buffer) multiplexed with remappable RPG0 and PMP data PMD8.
91 TRCLK/PMA18/RF6 bidirectional PORTF I/O RF6 (ST buffer) multiplexed with trace clock TRCLK and PMA18.
92 TRD3/PMA19/RF7 bidirectional PORTF I/O RF7 (ST buffer) multiplexed with trace data TRD3 and PMA19.
93 RPB10/PMD0/RB10 bidirectional PORTB I/O RB10 (ST buffer) multiplexed with remappable RPB10 and PMP data PMD0.
94 RPB11/PMD1/RB11 bidirectional PORTB I/O RB11 (ST buffer) multiplexed with remappable RPB11 and PMP data PMD1.
95 TRD2/PMA20/RG14 bidirectional PORTG I/O RG14 (ST buffer) multiplexed with trace data TRD2 and PMA20.
96 TRD1/RPG12/PMA21/RG12 bidirectional PORTG I/O RG12 (ST buffer) multiplexed with trace data TRD1, remappable RPG12 and PMA21.
97 TRD0/PMA22/RG13 bidirectional PORTG I/O RG13 (ST buffer) multiplexed with trace data TRD0 and PMA22.
98 RPB12/PMD2/RB12 bidirectional PORTB I/O RB12 (ST buffer) multiplexed with remappable RPB12 and PMP data PMD2.
99 RPB13/CTPLS/PMD3/RB13 bidirectional PORTB I/O RB13 (ST buffer) multiplexed with remappable RPB13, CTMU pulse generator output CTPLS and PMP data PMD3.
100 TDO/PMD4/RA10 output JTAG test data output TDO; pin also PORTA I/O RA10 (ST buffer) and PMP data PMD4.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package TQFP-100(12x12)
Category Single Chip Microcomputer/Microcontroller
Pins 100

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Operating voltage 2.2 3.6 V 1
Operating temperature (120 MHz) -40 85 ºC DC to 120 MHz 1
Operating temperature (80 MHz) -40 125 ºC DC to 80 MHz 1
Internal FRC oscillator frequency tolerance -5 5 % 8 MHz FRC internal oscillator, 0ºC to +70ºC 1

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
housing PPS CLR or INV register, the base register must be read. 13.3 Peripheral Pin Select (PPS) 245

CAD (KiCad official)

  • Symbol: PIC32MK0512GPE100-I
  • Footprint: Package_QFP:TQFP-100_12x12mm_P0.4mm
  • 3D model: TQFP-100(12x12) (KiCad packages3D, STEP)
  • 3D model files: pic32mk0512gpe100-i-etched.step / pic32mk0512gpe100-i-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pic32mk0512gpe100-i.step / pic32mk0512gpe100-i.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (724 pp, sha256 8d20d53d4123e666, retrieved 2026-10-28, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF