3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownPIC32MK0512GPE100-I
Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · TQFP-100(12x12)
PIC32MK0512GPE100-I from Microchip Tech, in a TQFP-100(12x12). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | AN23/CVD23/PMA23/RG15 | bidirectional | PORTG I/O RG15 (ST buffer) multiplexed with analog input AN23, CVD23 capacitive touch assist and PMP address PMA23. |
| 2 | VDD | power_in | Positive supply for peripheral logic and I/O pins; must be connected at all times. |
| 3 | TCK/RPA7/PMD5/RA7 | bidirectional | JTAG test clock input TCK, also PORTA I/O RA7 (ST buffer), remappable RPA7 and PMP data PMD5. |
| 4 | RPB14/VBUSON1/PMD6/RB14 | bidirectional | PORTB I/O RB14 (ST buffer) multiplexed with USB1 VBUS power control output VBUSON1, PMD6 and remappable RPB14. |
| 5 | RPB15/PMD7/RB15 | bidirectional | PORTB I/O RB15 (ST buffer) multiplexed with PMP data PMD7 and remappable RPB15. |
| 6 | RD1 | bidirectional | PORTD I/O RD1 (ST buffer) on a 100-pin device. |
| 7 | RD2 | bidirectional | PORTD I/O RD2 (ST buffer) on a 100-pin device. |
| 8 | RPD3/RD3 | bidirectional | PORTD I/O RD3 (ST buffer) with remappable RPD3 pin function. |
| 9 | RPD4/RD4 | bidirectional | PORTD I/O RD4 (ST buffer) with remappable RPD4 pin function. |
| 10 | AN19/CVD19/RPG6/VBUSON2/PMA5/RG6 | bidirectional | PORTG I/O RG6 (ST buffer) multiplexed with analog input AN19, CVD19, USB2 VBUS control VBUSON2 and PMA5. |
| 11 | AN18/CVD18/RPG7/SCL1/PMA4/RG7(5) | bidirectional | PORTG I/O RG7 (ST buffer) multiplexed with analog input AN18, CVD18, I2C clock SCL1 (per footnote 5) and PMA4. |
| 12 | AN17/CVD17/RPG8/SDA1/PMA3/RG8(6) | bidirectional | PORTG I/O RG8 (ST buffer) multiplexed with analog input AN17, CVD17, I2C data SDA1 (per footnote 6) and PMA3. |
| 13 | MCLR | input | Master Clear input; active-low device Reset. |
| 14 | AN16/CVD16/RPG9/PMA2/RG9 | bidirectional | PORTG I/O RG9 (ST buffer) multiplexed with analog input AN16, CVD16 and PMA2. |
| 15 | VSS | power_in | Ground reference for logic, I/O pins and USB; must be connected at all times. |
| 16 | VDD | power_in | Positive supply for peripheral logic and I/O pins; must be connected at all times. |
| 17 | AN22/CVD22/RG10 | bidirectional | PORTG I/O RG10 (ST buffer) multiplexed with analog input AN22 and CVD22. |
| 18 | AN21/CVD21/RE8 | bidirectional | PORTE I/O RE8 (ST buffer) multiplexed with analog input AN21 and CVD21. |
| 19 | AN20/CVD20/RE9 | bidirectional | PORTE I/O RE9 (ST buffer) multiplexed with analog input AN20 and CVD20. |
| 20 | AN10/CVD10/RPA12/RA12 | bidirectional | PORTA I/O RA12 (ST buffer) multiplexed with analog input AN10, CVD10 and remappable RPA12. |
| 21 | AN9/CVD9/RPA11/RA11 | bidirectional | PORTA I/O RA11 (ST buffer) multiplexed with analog input AN9, CVD9 and remappable RPA11. |
| 22 | OA2OUT/AN0/C2IN4-/C4IN3-/RPA0/RA0 | bidirectional | PORTA I/O RA0 (ST buffer) multiplexed with Op amp 2 output OA2OUT, analog input AN0, comparator inputs and remappable RPA0. |
| 23 | OA2IN+/AN1/C2IN1+/RPA1/RA1 | bidirectional | PORTA I/O RA1 (ST buffer) multiplexed with Op amp 2 positive input OA2IN+, analog input AN1, comparator input and remappable RPA1. |
| 24 | PGD3/OA2IN-/AN2/C2IN1-/RPB0/CTED2/RB0 | bidirectional | PORTB I/O RB0 (ST buffer) multiplexed with PGD3 programming data, Op amp 2 negative input OA2IN-, analog input AN2 and CTMU edge input CTED2. |
| 25 | PGC3/OA1OUT/AN3/C1IN4-/C4IN2-/RPB1/CTED1/RB1 | bidirectional | PORTB I/O RB1 (ST buffer) multiplexed with PGC3 programming clock, Op amp 1 output OA1OUT, analog input AN3 and CTMU edge input CTED1. |
| 26 | PGC1/OA1IN+/AN4/C1IN1+/C1IN3-/C2IN3-/RPB2/RB2 | bidirectional | PORTB I/O RB2 (ST buffer) multiplexed with PGC1 programming clock, Op amp 1 positive input OA1IN+ and analog input AN4. |
| 27 | PGD1/OA1IN-/AN5/CTCMP/C1IN1-/RTCC/RPB3/RB3 | bidirectional | PORTB I/O RB3 (ST buffer) multiplexed with PGD1 programming data, Op amp 1 negative input OA1IN-, analog input AN5, CTMU external capacitor input CTCMP and RTCC alarm output. |
| 28 | VREF-/AN33/CVD33/PMA7/RF9 | power_in | Analog voltage reference (low) input VREF-; pin also PORTF I/O RF9 (ST buffer) with analog input AN33 and PMA7. |
| 29 | VREF+/AN34/CVD34/PMA6/RF10 | power_in | Analog voltage reference (high) input VREF+; pin also PORTF I/O RF10 (ST buffer) with analog input AN34 and PMA6. |
| 30 | AVDD | power_in | Positive supply for analog modules; must be connected at all times, even if the ADC is not used. |
| 31 | AVSS | power_in | Ground reference for analog modules; must be connected at all times, even if the ADC is not used. |
| 32 | OA3OUT/AN6/CVD6/C3IN4-/C4IN1+/C4IN4-/RPC0/RC0 | bidirectional | PORTC I/O RC0 (ST buffer) multiplexed with Op amp 3 output OA3OUT, analog input AN6, CVD6 and remappable RPC0. |
| 33 | OA3IN-/AN7/CVD7/C3IN1-/C4IN1-/RPC1/RC1 | bidirectional | PORTC I/O RC1 (ST buffer) multiplexed with Op amp 3 negative input OA3IN-, analog input AN7, CVD7 and remappable RPC1. |
| 34 | OA3IN+/AN8/CVD8/C3IN1+/C3IN3-/RPC2/PMA13/RC2 | bidirectional | PORTC I/O RC2 (ST buffer) multiplexed with Op amp 3 positive input OA3IN+, analog input AN8, CVD8 and PMA13. |
| 35 | AN11/CVD11/C1IN2-/PMA12/RC11 | bidirectional | PORTC I/O RC11 (ST buffer) multiplexed with analog input AN11, CVD11, comparator 1 input C1IN2- and PMA12. |
| 36 | VSS | power_in | Ground reference for logic, I/O pins and USB; must be connected at all times. |
| 37 | VDD | power_in | Positive supply for peripheral logic and I/O pins; must be connected at all times. |
| 38 | AN35/CVD35/RG11 | bidirectional | PORTG I/O RG11 (ST buffer) multiplexed with analog input AN35 and CVD35. |
| 39 | AN36/CVD36/RF13 | bidirectional | PORTF I/O RF13 (ST buffer) multiplexed with analog input AN36 and CVD36. |
| 40 | AN37/CVD37/RF12 | bidirectional | PORTF I/O RF12 (ST buffer) multiplexed with analog input AN37 and CVD37. |
| 41 | AN12/CVD12/C2IN2-/C5IN2-/SDA4/PMA11/RE12(6) | bidirectional | PORTE I/O RE12 (ST buffer) multiplexed with analog input AN12, CVD12, I2C data SDA4 (per footnote 6) and PMA11. |
| 42 | AN13/CVD13/C3IN2-/SCL4/PMA10/RE13(5) | bidirectional | PORTE I/O RE13 (ST buffer) multiplexed with analog input AN13, CVD13, I2C clock SCL4 (per footnote 5) and PMA10. |
| 43 | AN14/CVD14/RPE14/PMA1/RE14 | bidirectional | PORTE I/O RE14 (ST buffer) multiplexed with analog input AN14, CVD14, remappable RPE14 and PMA1. |
| 44 | AN15/CVD15/RPE15/PMA0/RE15 | bidirectional | PORTE I/O RE15 (ST buffer) multiplexed with analog input AN15, CVD15, remappable RPE15 and PMA0. |
| 45 | VSS | power_in | Ground reference for logic, I/O pins and USB; must be connected at all times. |
| 46 | VDD | power_in | Positive supply for peripheral logic and I/O pins; must be connected at all times. |
| 47 | AN38/CVD38/RD14 | bidirectional | PORTD I/O RD14 (ST buffer) multiplexed with analog input AN38 and CVD38. |
| 48 | AN39/CVD39/RD15 | bidirectional | PORTD I/O RD15 (ST buffer) multiplexed with analog input AN39 and CVD39. |
| 49 | TDI/DAC3/AN26/CVD26/RPA8/SDA2/PMA9/RA8(6) | bidirectional | JTAG test data input TDI, also PORTA I/O RA8 (ST buffer) with CDAC3 output, analog input AN26, I2C data SDA2 (per footnote 6) and PMA9. |
| 50 | RPB4/SCL2/PMA8/RB4(5) | bidirectional | PORTB I/O RB4 (ST buffer) multiplexed with remappable RPB4, I2C clock SCL2 (per footnote 5) and PMA8. |
| 51 | OA5IN+/DAC1/AN24/CVD24/C5IN1+/C5IN3-/RPA4/T1CK/RA4 | bidirectional | PORTA I/O RA4 (ST buffer) multiplexed with Op amp 5 positive input OA5IN+, CDAC1 output, analog input AN24, Timer1 clock T1CK and remappable RPA4. |
| 52 | AN40/CVD40/RPE0/RE0 | bidirectional | PORTE I/O RE0 (ST buffer) multiplexed with analog input AN40, CVD40 and remappable RPE0. |
| 53 | AN41/CVD41/RPE1/RE1 | bidirectional | PORTE I/O RE1 (ST buffer) multiplexed with analog input AN41, CVD41 and remappable RPE1. |
| 54 | VBUS1 | input | USB1 bus power monitor input; tie to VSS if USB1 is not used. |
| 55 | VUSB3V3 | power_in | USB internal transceiver supply; this pin should be connected to VDD. |
| 56 | D1- | bidirectional | USB1 D- data line; connect through 10K to VSS if USB1 is not used. |
| 57 | D1+ | bidirectional | USB1 D+ data line; connect through 10K to VSS if USB1 is not used. |
| 58 | VBUS2 | input | USB2 bus power monitor input; tie to VSS if USB2 is not used. |
| 59 | D2- | bidirectional | USB2 D- data line; connect through 10K to VSS if USB2 is not used. |
| 60 | D2+ | bidirectional | USB2 D+ data line; connect through 10K to VSS if USB2 is not used. |
| 61 | AN45/CVD45/RF5 | bidirectional | PORTF I/O RF5 (ST buffer) multiplexed with analog input AN45 and CVD45. |
| 62 | VDD | power_in | Positive supply for peripheral logic and I/O pins; must be connected at all times. |
| 63 | OSCI/CLKI/AN49/CVD49/RPC12/RC12 | input | Oscillator crystal input OSC1 or external clock input CLKI (ST buffer), also PORTC I/O RC12, analog input AN49 and remappable RPC12. |
| 64 | OSCO/CLKO/RPC15/RC15 | output | Oscillator crystal output OSC2 or CLKO output, also PORTC I/O RC15 (ST buffer) and remappable RPC15. |
| 65 | VSS | power_in | Ground reference for logic, I/O pins and USB; must be connected at all times. |
| 66 | AN46/CVD46/RPA14/RA14 | bidirectional | PORTA I/O RA14 (ST buffer) multiplexed with analog input AN46, CVD46 and remappable RPA14. |
| 67 | AN47/CVD47/RPA15/RA15 | bidirectional | PORTA I/O RA15 (ST buffer) multiplexed with analog input AN47, CVD47 and remappable RPA15. |
| 68 | VBAT | power_in | Battery backup supply for selected peripherals; otherwise connect to VDD. Functionality is compromised per errata and it must be connected to VDD. |
| 69 | PGD2/RPB5/SDA3/USBID1/RB5(6) | bidirectional | PORTB I/O RB5 (ST buffer) multiplexed with PGD2 programming data, USB1 OTG ID detect USBID1, I2C data SDA3 (per footnote 6) and remappable RPB5. |
| 70 | PGC2/RPB6/SCL3/SCK2/PMA15/RB6(5) | bidirectional | PORTB I/O RB6 (ST buffer) multiplexed with PGC2 programming clock, SPI2 clock SCK2, I2C clock SCL3 (per footnote 5) and PMA15. |
| 71 | DAC2/AN48/CVD48/RPC10/PMA14/PMCS/RC10 | bidirectional | PORTC I/O RC10 (ST buffer) multiplexed with CDAC2 output, analog input AN48, CVD48, PMP chip select PMCS and PMA14. |
| 72 | OA5OUT/AN25/CVD25/C5IN4-/RPB7/SCK1/INT0/RB7 | bidirectional | PORTB I/O RB7 (ST buffer) multiplexed with Op amp 5 output OA5OUT, analog input AN25, SPI1 clock SCK1 and external interrupt INT0. |
| 73 | SOSCI/RPC13(4)/RC13(4) | input | 32.768 kHz secondary oscillator crystal input SOSCI; ST/CMOS buffer, restricted to input functions per footnote 4. |
| 74 | SOSCO/RPB8(4)/RB8(4) | output | 32.768 kHz secondary oscillator crystal output SOSCO; CMOS buffer. |
| 75 | VSS | power_in | Ground reference for logic, I/O pins and USB; must be connected at all times. |
| 76 | TMS/OA5IN-/AN27/CVD27/LVDIN/C5IN1-/RPB9/RB9 | bidirectional | JTAG test mode select TMS, also PORTB I/O RB9 (ST buffer), Op amp 5 negative input OA5IN-, analog input AN27 and LVDIN as printed. |
| 77 | RPC6/USBID2/PMA16/RC6 | bidirectional | PORTC I/O RC6 (ST buffer) multiplexed with remappable RPC6, USB2 OTG ID detect USBID2 and PMA16. |
| 78 | RPC7/PMA17/RC7 | bidirectional | PORTC I/O RC7 (ST buffer) multiplexed with remappable RPC7 and PMA17. |
| 79 | PMD12/RD12 | bidirectional | PORTD I/O RD12 (ST buffer) multiplexed with PMP data PMD12. |
| 80 | PMD13/RD13 | bidirectional | PORTD I/O RD13 (ST buffer) multiplexed with PMP data PMD13. |
| 81 | RPC8/PMWR/RC8 | bidirectional | PORTC I/O RC8 (ST buffer) multiplexed with remappable RPC8 and PMP write strobe PMWR. |
| 82 | RPD5/PMRD/RD5 | bidirectional | PORTD I/O RD5 (ST buffer) multiplexed with remappable RPD5 and PMP read strobe PMRD. |
| 83 | RPD6/PMD14/RD6 | bidirectional | PORTD I/O RD6 (ST buffer) multiplexed with remappable RPD6 and PMP data PMD14. |
| 84 | RPC9/PMD15/RC9 | bidirectional | PORTC I/O RC9 (ST buffer) multiplexed with remappable RPC9 and PMP data PMD15. |
| 85 | VSS | power_in | Ground reference for logic, I/O pins and USB; must be connected at all times. |
| 86 | VDD | power_in | Positive supply for peripheral logic and I/O pins; must be connected at all times. |
| 87 | RPF0/PMD11/RF0 | bidirectional | PORTF I/O RF0 (ST buffer) multiplexed with remappable RPF0 and PMP data PMD11. |
| 88 | RPF1/PMD10/RF1 | bidirectional | PORTF I/O RF1 (ST buffer) multiplexed with remappable RPF1 and PMP data PMD10. |
| 89 | RPG1/PMD9/RG1 | bidirectional | PORTG I/O RG1 (ST buffer) multiplexed with remappable RPG1 and PMP data PMD9. |
| 90 | RPG0/PMD8/RG0 | bidirectional | PORTG I/O RG0 (ST buffer) multiplexed with remappable RPG0 and PMP data PMD8. |
| 91 | TRCLK/PMA18/RF6 | bidirectional | PORTF I/O RF6 (ST buffer) multiplexed with trace clock TRCLK and PMA18. |
| 92 | TRD3/PMA19/RF7 | bidirectional | PORTF I/O RF7 (ST buffer) multiplexed with trace data TRD3 and PMA19. |
| 93 | RPB10/PMD0/RB10 | bidirectional | PORTB I/O RB10 (ST buffer) multiplexed with remappable RPB10 and PMP data PMD0. |
| 94 | RPB11/PMD1/RB11 | bidirectional | PORTB I/O RB11 (ST buffer) multiplexed with remappable RPB11 and PMP data PMD1. |
| 95 | TRD2/PMA20/RG14 | bidirectional | PORTG I/O RG14 (ST buffer) multiplexed with trace data TRD2 and PMA20. |
| 96 | TRD1/RPG12/PMA21/RG12 | bidirectional | PORTG I/O RG12 (ST buffer) multiplexed with trace data TRD1, remappable RPG12 and PMA21. |
| 97 | TRD0/PMA22/RG13 | bidirectional | PORTG I/O RG13 (ST buffer) multiplexed with trace data TRD0 and PMA22. |
| 98 | RPB12/PMD2/RB12 | bidirectional | PORTB I/O RB12 (ST buffer) multiplexed with remappable RPB12 and PMP data PMD2. |
| 99 | RPB13/CTPLS/PMD3/RB13 | bidirectional | PORTB I/O RB13 (ST buffer) multiplexed with remappable RPB13, CTMU pulse generator output CTPLS and PMP data PMD3. |
| 100 | TDO/PMD4/RA10 | output | JTAG test data output TDO; pin also PORTA I/O RA10 (ST buffer) and PMP data PMD4. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | TQFP-100(12x12) |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 100 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating voltage | 2.2 | 3.6 | V | 1 | |||
| Operating temperature (120 MHz) | -40 | 85 | ºC | DC to 120 MHz | 1 | ||
| Operating temperature (80 MHz) | -40 | 125 | ºC | DC to 80 MHz | 1 | ||
| Internal FRC oscillator frequency tolerance | -5 | 5 | % | 8 MHz FRC internal oscillator, 0ºC to +70ºC | 1 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | PPS | CLR or INV register, the base register must be read. 13.3 Peripheral Pin Select (PPS) | 245 |
CAD (KiCad official)
- Symbol:
PIC32MK0512GPE100-I - Footprint:
Package_QFP:TQFP-100_12x12mm_P0.4mm - 3D model: TQFP-100(12x12) (KiCad packages3D, STEP)
- 3D model files:
pic32mk0512gpe100-i-etched.step/pic32mk0512gpe100-i-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic32mk0512gpe100-i.step/pic32mk0512gpe100-i.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (724 pp, sha256
8d20d53d4123e666, retrieved 2026-10-28, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).