Generated by kicad-footprint-generator · KiCad file format 20260206
PIC24FJ64GA006T-I
Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · TQFP-64(10x10)
PIC24FJ64GA006T-I from Microchip Tech, in a TQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PMD5/RE5 | bidirectional | PORTE digital I/O RE5 shared with Parallel Master Port data bit 5 (ST/TTL). |
| 2 | PMD6/RE6 | bidirectional | PORTE digital I/O RE6 shared with Parallel Master Port data bit 6 (ST/TTL). |
| 3 | PMD7/RE7 | bidirectional | PORTE digital I/O RE7 shared with Parallel Master Port data bit 7 (ST/TTL). |
| 4 | RG6/SCK2/CN8/PMA5 | bidirectional | PORTG digital I/O RG6 shared with SPI2 serial clock, interrupt-on-change CN8 and PMP address bit 5. |
| 5 | RG7/SDI2/CN9/PMA4 | bidirectional | PORTG digital I/O RG7 shared with SPI2 serial data input, interrupt-on-change CN9 and PMP address bit 4. |
| 6 | RG8/SDO2/CN10/PMA3 | bidirectional | PORTG digital I/O RG8 shared with SPI2 serial data output, interrupt-on-change CN10 and PMP address bit 3. |
| 7 | MCLR | input | Master Clear (device Reset) input with Schmitt Trigger buffer; brought low to cause a Reset. |
| 8 | RG9/SS2/CN11/PMA2 | bidirectional | PORTG digital I/O RG9 shared with SPI2 slave select/frame select, interrupt-on-change CN11 and PMP address bit 2. |
| 9 | VSS | power_in | Ground reference for logic and I/O pins. |
| 10 | VDD | power_in | Positive supply for peripheral digital logic and I/O pins (2.0V to 3.6V operating range). |
| 11 | RB5/AN5/C1IN+/CN7 | bidirectional | PORTB digital I/O RB5 shared with A/D analog input AN5, Comparator 1 positive input and interrupt-on-change CN7. |
| 12 | RB4/AN4/C1IN-/CN6 | bidirectional | PORTB digital I/O RB4 shared with A/D analog input AN4, Comparator 1 negative input and interrupt-on-change CN6. |
| 13 | RB3/AN3/C2IN+/CN5 | bidirectional | PORTB digital I/O RB3 shared with A/D analog input AN3, Comparator 2 positive input and interrupt-on-change CN5. |
| 14 | RB2/AN2/C2IN-/SS1/CN4 | bidirectional | PORTB digital I/O RB2 shared with A/D analog input AN2, Comparator 2 negative input, SPI1 slave select/frame select and interrupt-on-change CN4. |
| 15 | RB1/AN1/VREF-/PGC1/EMUC1/CN3 | bidirectional | PORTB digital I/O RB1 shared with AN1, A/D and comparator low reference VREF-, ICSP/debugger clock PGC1/EMUC1 and CN3. |
| 16 | RB0/AN0/VREF+/PGD1/EMUD1/CN2/PMA6 | bidirectional | PORTB digital I/O RB0 shared with AN0, A/D and comparator high reference VREF+, ICSP/debugger data PGD1/EMUD1, CN2 and PMP address bit 6. |
| 17 | RB6/AN6/PGC2/EMUC2/OCFA | bidirectional | PORTB digital I/O RB6 shared with AN6, ICSP/debugger clock PGC2/EMUC2 and Output Compare Fault A input. |
| 18 | RB7/AN7/PGD2/EMUD2 | bidirectional | PORTB digital I/O RB7 shared with AN7 and ICSP/debugger data PGD2/EMUD2. |
| 19 | AVDD | power_in | Positive supply for analog modules; must always be connected even if analog features are unused. |
| 20 | AVSS | power_in | Ground reference for analog modules; must always be connected even if analog features are unused. |
| 21 | RB8/AN8/C1OUT/U2CTS | bidirectional | PORTB digital I/O RB8 shared with AN8, Comparator 1 output and UART2 Clear-to-Send input. |
| 22 | RB9/AN9/C2OUT/PMA7 | bidirectional | PORTB digital I/O RB9 shared with AN9, Comparator 2 output and PMP address bit 7. |
| 23 | RB10/AN10/CVREF/PMA13/TMS | bidirectional | PORTB digital I/O RB10 shared with AN10, comparator voltage reference output CVREF, PMP address bit 13 and JTAG Test Mode Select input. |
| 24 | RB11/AN11/PMA12/TDO | bidirectional | PORTB digital I/O RB11 shared with AN11, PMP address bit 12 and JTAG Test Data output. |
| 25 | VSS | power_in | Ground reference for logic and I/O pins. |
| 26 | VDD | power_in | Positive supply for peripheral digital logic and I/O pins (2.0V to 3.6V operating range). |
| 27 | RB12/AN12/PMA11/TCK | bidirectional | PORTB digital I/O RB12 shared with AN12, PMP address bit 11 and JTAG Test Clock/programming clock input. |
| 28 | RB13/AN13/PMA10/TDI | bidirectional | PORTB digital I/O RB13 shared with AN13, PMP address bit 10 and JTAG Test Data/programming data input. |
| 29 | RB14/AN14/PMA1/U2RTS/BCLK2 | bidirectional | PORTB digital I/O RB14 shared with AN14, PMP address bit 1, UART2 Request-to-Send output and UART2 IrDA baud clock. |
| 30 | RB15/AN15/OCFB/PMA0/CN12 | bidirectional | PORTB digital I/O RB15 shared with AN15, Output Compare Fault B input, PMP address bit 0 and interrupt-on-change CN12. |
| 31 | RF4/SDA2/U2RX/PMA9/CN17 | bidirectional | PORTF digital I/O RF4 shared with I2C2 data, UART2 receive input, PMP address bit 9 and interrupt-on-change CN17. |
| 32 | RF5/SCL2/U2TX/PMA8/CN18 | bidirectional | PORTF digital I/O RF5 shared with I2C2 clock, UART2 transmit output, PMP address bit 8 and interrupt-on-change CN18. |
| 33 | U1TX/SDO1/RF3 | bidirectional | PORTF digital I/O RF3 shared with SPI1 serial data output and UART1 transmit output. |
| 34 | U1RX/SDI1/RF2 | bidirectional | PORTF digital I/O RF2 shared with SPI1 serial data input and UART1 receive input. |
| 35 | U1RTS/BCLK1/SCK1/INT0/RF6 | bidirectional | PORTF digital I/O RF6 shared with SPI1 serial clock, external interrupt INT0, UART1 Request-to-Send output and UART1 IrDA baud clock. |
| 36 | SDA1/RG3 | bidirectional | PORTG digital I/O RG3 shared with I2C1 data input/output. |
| 37 | SCL1/RG2 | bidirectional | PORTG digital I/O RG2 shared with I2C1 clock input/output. |
| 38 | VDD | power_in | Positive supply for peripheral digital logic and I/O pins (2.0V to 3.6V operating range). |
| 39 | OSC1/CLKI/RC12 | input | Main oscillator input / main clock input connection (analog level), shared with digital I/O RC12. |
| 40 | OSC2/CLKO/RC15 | bidirectional | Main oscillator output / system clock output, shared with digital I/O RC15 depending on OSCIOFCN configuration. |
| 41 | VSS | power_in | Ground reference for logic and I/O pins. |
| 42 | RD8/IC1/INT1/RTCC | bidirectional | PORTD digital I/O RD8 shared with Input Capture 1, external interrupt INT1 and real-time clock alarm output. |
| 43 | RD9/IC2/INT2/U1CTS | bidirectional | PORTD digital I/O RD9 shared with Input Capture 2, external interrupt INT2 and UART1 Clear-to-Send input. |
| 44 | IC3/PMCS2/INT3/RD10 | bidirectional | PORTD digital I/O RD10 shared with Input Capture 3, external interrupt INT3 and PMP Chip Select 2 strobe/address bit 15. |
| 45 | IC4/PMCS1/INT4/RD11 | bidirectional | PORTD digital I/O RD11 shared with Input Capture 4, external interrupt INT4 and PMP Chip Select 1 strobe/address bit 14. |
| 46 | OC1/RD0 | bidirectional | PORTD digital I/O RD0 shared with Output Compare/PWM 1 output. |
| 47 | SOSCI/CN1/RC13 | bidirectional | PORTC digital I/O RC13 shared with secondary oscillator/Timer1 clock input and interrupt-on-change CN1. |
| 48 | SOSCO/T1CK/CN0/RC14 | bidirectional | PORTC digital I/O RC14 shared with secondary oscillator output, Timer1 clock input and interrupt-on-change CN0. |
| 49 | OC2/RD1 | bidirectional | PORTD digital I/O RD1 shared with Output Compare/PWM 2 output. |
| 50 | OC3/RD2 | bidirectional | PORTD digital I/O RD2 shared with Output Compare/PWM 3 output. |
| 51 | RD3/OC4/PMBE | bidirectional | PORTD digital I/O RD3 shared with Output Compare/PWM 4 output and PMP byte enable strobe. |
| 52 | RD4/OC5/IC5/PMWR/CN13 | bidirectional | PORTD digital I/O RD4 shared with Output Compare 5, Input Capture 5, PMP write strobe and interrupt-on-change CN13. |
| 53 | PMRD/CN14/RD5 | bidirectional | PORTD digital I/O RD5 shared with PMP read strobe and interrupt-on-change CN14. |
| 54 | CN15/RD6 | bidirectional | PORTD digital I/O RD6 shared with interrupt-on-change CN15. |
| 55 | CN16/RD7 | bidirectional | PORTD digital I/O RD7 shared with interrupt-on-change CN16. |
| 56 | VDDCORE/VCAP | power_in | Core logic supply (regulator disabled) or external filter capacitor connection (regulator enabled; 10 µF low-ESR capacitor to ground, not to VDD). |
| 57 | ENVREG | input | Enable for on-chip voltage regulator; tie to VDD to enable or to ground to disable. |
| 58 | RF0 | bidirectional | PORTF digital I/O RF0 with Schmitt Trigger input. |
| 59 | RF1 | bidirectional | PORTF digital I/O RF1 with Schmitt Trigger input. |
| 60 | PMD0/RE0 | bidirectional | PORTE digital I/O RE0 shared with Parallel Master Port data bit 0 (ST/TTL). |
| 61 | PMD1/RE1 | bidirectional | PORTE digital I/O RE1 shared with Parallel Master Port data bit 1 (ST/TTL). |
| 62 | PMD2/RE2 | bidirectional | PORTE digital I/O RE2 shared with Parallel Master Port data bit 2 (ST/TTL). |
| 63 | PMD3/RE3 | bidirectional | PORTE digital I/O RE3 shared with Parallel Master Port data bit 3 (ST/TTL). |
| 64 | PMD4/RE4 | bidirectional | PORTE digital I/O RE4 shared with Parallel Master Port data bit 4 (ST/TTL). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | TQFP-64(10x10) |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 64 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Ambient temperature under bias | -40 | 85 | °C | 217 | |||
| Storage temperature | -65 | 150 | °C | 217 | |||
| Voltage on VDD with respect to VSS | VDD | -0.3 | 4 | V | 217 | ||
| Voltage on any combined analog and digital pin and MCLR, with respect to VSS | -0.3 | V | -0.3V to (VDD + 0.3V) | 217 | |||
| Voltage on any digital only pin with respect to VSS | -0.3 | 6 | V | 217 | |||
| Voltage on VDDCORE with respect to VSS | VDDCORE | -0.3 | 2.8 | V | 217 | ||
| Maximum output current sunk by any I/O pin | 25 | mA | 217 | ||||
| Maximum output current sourced by any I/O pin | 25 | mA | 217 | ||||
| Operating Junction Temperature Range | TJ | -40 | 125 | °C | 218 | ||
| Operating Ambient Temperature Range | TA | -40 | 85 | °C | 218 | ||
| Supply Voltage (VDDCORE, regulator disabled) | VDDCORE | 2 | 2.75 | V | Regulator is disabled | 218 | |
| Supply Voltage (VDD, regulator disabled) | VDD | 3.6 | V | Regulator is disabled; min is VDDCORE | 218 | ||
| Supply Voltage (VDD, regulator enabled) | VDD | 3.6 | V | Regulator is enabled; min is VBOR | 218 | ||
| RAM Data Retention Voltage | VDR | 1.5 | V | 218 | |||
| VDD Rise Rate to Ensure Internal Power-on Reset Signal | SVDD | 0.05 | V/ms | 0-3.3V in 0.1s; 0-2.5V in 60 ms | 218 | ||
| Brown-out Reset Voltage | VBOR | 1.9 | 2.2 | 2.5 | V | Regulator must be enabled | 218 |
| Package Thermal Resistance, 10x10x1 mm TQFP | θJA | 76.6 | °C/W | Note 1 (package simulation) | 218 | ||
| Operating Current | IDD | 20 | 32 | mA | 16 MIPS, 3.6V, +25°C | 219 | |
| Operating Current | IDD | 1.6 | 4 | mA | 1 MIPS, 3.6V, +25°C | 219 | |
| Idle Current | IIDLE | 6.8 | 8 | mA | 16 MIPS, 3.6V, +25°C | 220 | |
| Base Power-Down Current | IPD | 27 | 60 | µA | 3.6V, +25°C | 221 | |
| Base Power-Down Current | IPD | 120 | 600 | µA | 3.6V, +85°C | 221 | |
| Input Low Voltage, ST buffer | VIL | 0 | V | VSS to 0.2 VDD | 222 | ||
| Input Low Voltage, MCLR | VIL | 0 | V | VSS to 0.2 VDD | 222 | ||
| Input Low Voltage, SMBus buffer | VIL | 0.8 | V | SMBus enabled | 222 | ||
| Input High Voltage, ST buffer, digital only | VIH | 5.5 | V | min 0.8 VDD | 222 | ||
| CNxx Pull-up Current | ICNPU | 50 | 250 | 400 | µA | VDD = 3.3V, VPIN = VSS | 222 |
| Input Leakage Current, I/O ports | IIL | 50 | 1000 | nA | VSS ≤ VPIN ≤ VDD, pin at high-impedance | 222 | |
| Output Low Voltage, I/O Ports | VOL | 0.4 | V | IOL = 8.5 mA, VDD = 3.6V | 223 | ||
| Output High Voltage, I/O Ports | VOH | 3 | V | IOH = -3.0 mA, VDD = 3.6V | 223 | ||
| Output High Voltage, I/O Ports | VOH | 2.4 | V | IOH = -6.0 mA, VDD = 3.6V | 223 | ||
| Output High Voltage, I/O Ports | VOH | 1.4 | V | IOH = -3.0 mA, VDD = 2.0V | 223 | ||
| Input Low Injection Current | IICL | -5 | mA | Standard Operating Conditions 3.0V to 3.6V | 224 | ||
| Input High Injection Current | IICH | 5 | mA | Standard Operating Conditions 3.0V to 3.6V | 224 | ||
| Total Input Injection Current | IICT | -20 | 20 | mA | Absolute instantaneous sum of all ± input injection currents | 224 | |
| VDD for Self-Timed Erase/Write | VPEW | 2.25 | 3.6 | V | 225 | ||
| Flash Characteristic Retention | TRETD | 20 | Year | Provided no other specifications are violated | 225 | ||
| External Filter Capacitor Value | CEFC | 4.7 | 10 | µF | Series resistance < 3 Ohm recommended; < 5 Ohm required | 225 | |
| Regulator Output Voltage | VRGOUT | 2.5 | V | 225 | |||
| Comparator Input Offset Voltage | VIOFF | 10 | 30 | mV | 226 | ||
| Comparator Common Mode Rejection Ratio | CMRR | 55 | dB | 226 | |||
| Comparator Response Time | TRESP | 150 | 400 | ns | 226 | ||
| PLL Input Frequency Range | FPLLI | 3 | 8 | MHz | ECPLL, HSPLL, XTPLL modes | 229 | |
| PLL Output Frequency Range | FSYS | 12 | 32 | MHz | 229 | ||
| FRC Accuracy @ 8 MHz | -2 | 2 | % | +25°C VDD = 3.0 - 3.6V | 229 | ||
| FRC Accuracy @ 8 MHz | -5 | 5 | % | -40°C ≤ TA ≤ +85°C VDD = 3.0 - 3.6V | 229 | ||
| LPRC Accuracy @ 31 kHz | -15 | 15 | % | -40°C ≤ TA ≤ +85°C VDD = 3.0 - 3.6V | 229 | ||
| Instruction Cycle Time | TCY | 62.5 | ns | 228 | |||
| A/D Clock Period | TAD | 75 | ns | TCY = 75 ns, ADxCON3 is in default state | 232 | ||
| A/D Throughput Rate | FCNV | 500 | ksps | AVDD > 2.7V | 232 | ||
| A/D Integral Nonlinearity | INL | 2 | LSb | VINL = AVSS = VREFL = 0V, AVDD = VREFH = 3V | 231 | ||
| A/D Gain Error | GERR | 3 | LSb | VINL = AVSS = VREFL = 0V, AVDD = VREFH = 3V | 231 |
CAD (KiCad official)
- Symbol:
PIC24FJ64GA006T-I - Footprint:
Package_QFP:TQFP-64_10x10mm_P0.5mm - 3D model: TQFP-64(10x10) (KiCad packages3D, STEP)
- 3D model files:
pic24fj64ga006t-i-etched.step/pic24fj64ga006t-i-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic24fj64ga006t-i.step/pic24fj64ga006t-i.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (258 pp, sha256
bb7c3ecb1fafd326, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).