Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

PIC24FJ64GA006T-I

Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · TQFP-64(10x10)

PIC24FJ64GA006T-I from Microchip Tech, in a TQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 PMD5/RE5 bidirectional PORTE digital I/O RE5 shared with Parallel Master Port data bit 5 (ST/TTL).
2 PMD6/RE6 bidirectional PORTE digital I/O RE6 shared with Parallel Master Port data bit 6 (ST/TTL).
3 PMD7/RE7 bidirectional PORTE digital I/O RE7 shared with Parallel Master Port data bit 7 (ST/TTL).
4 RG6/SCK2/CN8/PMA5 bidirectional PORTG digital I/O RG6 shared with SPI2 serial clock, interrupt-on-change CN8 and PMP address bit 5.
5 RG7/SDI2/CN9/PMA4 bidirectional PORTG digital I/O RG7 shared with SPI2 serial data input, interrupt-on-change CN9 and PMP address bit 4.
6 RG8/SDO2/CN10/PMA3 bidirectional PORTG digital I/O RG8 shared with SPI2 serial data output, interrupt-on-change CN10 and PMP address bit 3.
7 MCLR input Master Clear (device Reset) input with Schmitt Trigger buffer; brought low to cause a Reset.
8 RG9/SS2/CN11/PMA2 bidirectional PORTG digital I/O RG9 shared with SPI2 slave select/frame select, interrupt-on-change CN11 and PMP address bit 2.
9 VSS power_in Ground reference for logic and I/O pins.
10 VDD power_in Positive supply for peripheral digital logic and I/O pins (2.0V to 3.6V operating range).
11 RB5/AN5/C1IN+/CN7 bidirectional PORTB digital I/O RB5 shared with A/D analog input AN5, Comparator 1 positive input and interrupt-on-change CN7.
12 RB4/AN4/C1IN-/CN6 bidirectional PORTB digital I/O RB4 shared with A/D analog input AN4, Comparator 1 negative input and interrupt-on-change CN6.
13 RB3/AN3/C2IN+/CN5 bidirectional PORTB digital I/O RB3 shared with A/D analog input AN3, Comparator 2 positive input and interrupt-on-change CN5.
14 RB2/AN2/C2IN-/SS1/CN4 bidirectional PORTB digital I/O RB2 shared with A/D analog input AN2, Comparator 2 negative input, SPI1 slave select/frame select and interrupt-on-change CN4.
15 RB1/AN1/VREF-/PGC1/EMUC1/CN3 bidirectional PORTB digital I/O RB1 shared with AN1, A/D and comparator low reference VREF-, ICSP/debugger clock PGC1/EMUC1 and CN3.
16 RB0/AN0/VREF+/PGD1/EMUD1/CN2/PMA6 bidirectional PORTB digital I/O RB0 shared with AN0, A/D and comparator high reference VREF+, ICSP/debugger data PGD1/EMUD1, CN2 and PMP address bit 6.
17 RB6/AN6/PGC2/EMUC2/OCFA bidirectional PORTB digital I/O RB6 shared with AN6, ICSP/debugger clock PGC2/EMUC2 and Output Compare Fault A input.
18 RB7/AN7/PGD2/EMUD2 bidirectional PORTB digital I/O RB7 shared with AN7 and ICSP/debugger data PGD2/EMUD2.
19 AVDD power_in Positive supply for analog modules; must always be connected even if analog features are unused.
20 AVSS power_in Ground reference for analog modules; must always be connected even if analog features are unused.
21 RB8/AN8/C1OUT/U2CTS bidirectional PORTB digital I/O RB8 shared with AN8, Comparator 1 output and UART2 Clear-to-Send input.
22 RB9/AN9/C2OUT/PMA7 bidirectional PORTB digital I/O RB9 shared with AN9, Comparator 2 output and PMP address bit 7.
23 RB10/AN10/CVREF/PMA13/TMS bidirectional PORTB digital I/O RB10 shared with AN10, comparator voltage reference output CVREF, PMP address bit 13 and JTAG Test Mode Select input.
24 RB11/AN11/PMA12/TDO bidirectional PORTB digital I/O RB11 shared with AN11, PMP address bit 12 and JTAG Test Data output.
25 VSS power_in Ground reference for logic and I/O pins.
26 VDD power_in Positive supply for peripheral digital logic and I/O pins (2.0V to 3.6V operating range).
27 RB12/AN12/PMA11/TCK bidirectional PORTB digital I/O RB12 shared with AN12, PMP address bit 11 and JTAG Test Clock/programming clock input.
28 RB13/AN13/PMA10/TDI bidirectional PORTB digital I/O RB13 shared with AN13, PMP address bit 10 and JTAG Test Data/programming data input.
29 RB14/AN14/PMA1/U2RTS/BCLK2 bidirectional PORTB digital I/O RB14 shared with AN14, PMP address bit 1, UART2 Request-to-Send output and UART2 IrDA baud clock.
30 RB15/AN15/OCFB/PMA0/CN12 bidirectional PORTB digital I/O RB15 shared with AN15, Output Compare Fault B input, PMP address bit 0 and interrupt-on-change CN12.
31 RF4/SDA2/U2RX/PMA9/CN17 bidirectional PORTF digital I/O RF4 shared with I2C2 data, UART2 receive input, PMP address bit 9 and interrupt-on-change CN17.
32 RF5/SCL2/U2TX/PMA8/CN18 bidirectional PORTF digital I/O RF5 shared with I2C2 clock, UART2 transmit output, PMP address bit 8 and interrupt-on-change CN18.
33 U1TX/SDO1/RF3 bidirectional PORTF digital I/O RF3 shared with SPI1 serial data output and UART1 transmit output.
34 U1RX/SDI1/RF2 bidirectional PORTF digital I/O RF2 shared with SPI1 serial data input and UART1 receive input.
35 U1RTS/BCLK1/SCK1/INT0/RF6 bidirectional PORTF digital I/O RF6 shared with SPI1 serial clock, external interrupt INT0, UART1 Request-to-Send output and UART1 IrDA baud clock.
36 SDA1/RG3 bidirectional PORTG digital I/O RG3 shared with I2C1 data input/output.
37 SCL1/RG2 bidirectional PORTG digital I/O RG2 shared with I2C1 clock input/output.
38 VDD power_in Positive supply for peripheral digital logic and I/O pins (2.0V to 3.6V operating range).
39 OSC1/CLKI/RC12 input Main oscillator input / main clock input connection (analog level), shared with digital I/O RC12.
40 OSC2/CLKO/RC15 bidirectional Main oscillator output / system clock output, shared with digital I/O RC15 depending on OSCIOFCN configuration.
41 VSS power_in Ground reference for logic and I/O pins.
42 RD8/IC1/INT1/RTCC bidirectional PORTD digital I/O RD8 shared with Input Capture 1, external interrupt INT1 and real-time clock alarm output.
43 RD9/IC2/INT2/U1CTS bidirectional PORTD digital I/O RD9 shared with Input Capture 2, external interrupt INT2 and UART1 Clear-to-Send input.
44 IC3/PMCS2/INT3/RD10 bidirectional PORTD digital I/O RD10 shared with Input Capture 3, external interrupt INT3 and PMP Chip Select 2 strobe/address bit 15.
45 IC4/PMCS1/INT4/RD11 bidirectional PORTD digital I/O RD11 shared with Input Capture 4, external interrupt INT4 and PMP Chip Select 1 strobe/address bit 14.
46 OC1/RD0 bidirectional PORTD digital I/O RD0 shared with Output Compare/PWM 1 output.
47 SOSCI/CN1/RC13 bidirectional PORTC digital I/O RC13 shared with secondary oscillator/Timer1 clock input and interrupt-on-change CN1.
48 SOSCO/T1CK/CN0/RC14 bidirectional PORTC digital I/O RC14 shared with secondary oscillator output, Timer1 clock input and interrupt-on-change CN0.
49 OC2/RD1 bidirectional PORTD digital I/O RD1 shared with Output Compare/PWM 2 output.
50 OC3/RD2 bidirectional PORTD digital I/O RD2 shared with Output Compare/PWM 3 output.
51 RD3/OC4/PMBE bidirectional PORTD digital I/O RD3 shared with Output Compare/PWM 4 output and PMP byte enable strobe.
52 RD4/OC5/IC5/PMWR/CN13 bidirectional PORTD digital I/O RD4 shared with Output Compare 5, Input Capture 5, PMP write strobe and interrupt-on-change CN13.
53 PMRD/CN14/RD5 bidirectional PORTD digital I/O RD5 shared with PMP read strobe and interrupt-on-change CN14.
54 CN15/RD6 bidirectional PORTD digital I/O RD6 shared with interrupt-on-change CN15.
55 CN16/RD7 bidirectional PORTD digital I/O RD7 shared with interrupt-on-change CN16.
56 VDDCORE/VCAP power_in Core logic supply (regulator disabled) or external filter capacitor connection (regulator enabled; 10 µF low-ESR capacitor to ground, not to VDD).
57 ENVREG input Enable for on-chip voltage regulator; tie to VDD to enable or to ground to disable.
58 RF0 bidirectional PORTF digital I/O RF0 with Schmitt Trigger input.
59 RF1 bidirectional PORTF digital I/O RF1 with Schmitt Trigger input.
60 PMD0/RE0 bidirectional PORTE digital I/O RE0 shared with Parallel Master Port data bit 0 (ST/TTL).
61 PMD1/RE1 bidirectional PORTE digital I/O RE1 shared with Parallel Master Port data bit 1 (ST/TTL).
62 PMD2/RE2 bidirectional PORTE digital I/O RE2 shared with Parallel Master Port data bit 2 (ST/TTL).
63 PMD3/RE3 bidirectional PORTE digital I/O RE3 shared with Parallel Master Port data bit 3 (ST/TTL).
64 PMD4/RE4 bidirectional PORTE digital I/O RE4 shared with Parallel Master Port data bit 4 (ST/TTL).

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package TQFP-64(10x10)
Category Single Chip Microcomputer/Microcontroller
Pins 64

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Ambient temperature under bias -40 85 °C 217
Storage temperature -65 150 °C 217
Voltage on VDD with respect to VSS VDD -0.3 4 V 217
Voltage on any combined analog and digital pin and MCLR, with respect to VSS -0.3 V -0.3V to (VDD + 0.3V) 217
Voltage on any digital only pin with respect to VSS -0.3 6 V 217
Voltage on VDDCORE with respect to VSS VDDCORE -0.3 2.8 V 217
Maximum output current sunk by any I/O pin 25 mA 217
Maximum output current sourced by any I/O pin 25 mA 217
Operating Junction Temperature Range TJ -40 125 °C 218
Operating Ambient Temperature Range TA -40 85 °C 218
Supply Voltage (VDDCORE, regulator disabled) VDDCORE 2 2.75 V Regulator is disabled 218
Supply Voltage (VDD, regulator disabled) VDD 3.6 V Regulator is disabled; min is VDDCORE 218
Supply Voltage (VDD, regulator enabled) VDD 3.6 V Regulator is enabled; min is VBOR 218
RAM Data Retention Voltage VDR 1.5 V 218
VDD Rise Rate to Ensure Internal Power-on Reset Signal SVDD 0.05 V/ms 0-3.3V in 0.1s; 0-2.5V in 60 ms 218
Brown-out Reset Voltage VBOR 1.9 2.2 2.5 V Regulator must be enabled 218
Package Thermal Resistance, 10x10x1 mm TQFP θJA 76.6 °C/W Note 1 (package simulation) 218
Operating Current IDD 20 32 mA 16 MIPS, 3.6V, +25°C 219
Operating Current IDD 1.6 4 mA 1 MIPS, 3.6V, +25°C 219
Idle Current IIDLE 6.8 8 mA 16 MIPS, 3.6V, +25°C 220
Base Power-Down Current IPD 27 60 µA 3.6V, +25°C 221
Base Power-Down Current IPD 120 600 µA 3.6V, +85°C 221
Input Low Voltage, ST buffer VIL 0 V VSS to 0.2 VDD 222
Input Low Voltage, MCLR VIL 0 V VSS to 0.2 VDD 222
Input Low Voltage, SMBus buffer VIL 0.8 V SMBus enabled 222
Input High Voltage, ST buffer, digital only VIH 5.5 V min 0.8 VDD 222
CNxx Pull-up Current ICNPU 50 250 400 µA VDD = 3.3V, VPIN = VSS 222
Input Leakage Current, I/O ports IIL 50 1000 nA VSS ≤ VPIN ≤ VDD, pin at high-impedance 222
Output Low Voltage, I/O Ports VOL 0.4 V IOL = 8.5 mA, VDD = 3.6V 223
Output High Voltage, I/O Ports VOH 3 V IOH = -3.0 mA, VDD = 3.6V 223
Output High Voltage, I/O Ports VOH 2.4 V IOH = -6.0 mA, VDD = 3.6V 223
Output High Voltage, I/O Ports VOH 1.4 V IOH = -3.0 mA, VDD = 2.0V 223
Input Low Injection Current IICL -5 mA Standard Operating Conditions 3.0V to 3.6V 224
Input High Injection Current IICH 5 mA Standard Operating Conditions 3.0V to 3.6V 224
Total Input Injection Current IICT -20 20 mA Absolute instantaneous sum of all ± input injection currents 224
VDD for Self-Timed Erase/Write VPEW 2.25 3.6 V 225
Flash Characteristic Retention TRETD 20 Year Provided no other specifications are violated 225
External Filter Capacitor Value CEFC 4.7 10 µF Series resistance < 3 Ohm recommended; < 5 Ohm required 225
Regulator Output Voltage VRGOUT 2.5 V 225
Comparator Input Offset Voltage VIOFF 10 30 mV 226
Comparator Common Mode Rejection Ratio CMRR 55 dB 226
Comparator Response Time TRESP 150 400 ns 226
PLL Input Frequency Range FPLLI 3 8 MHz ECPLL, HSPLL, XTPLL modes 229
PLL Output Frequency Range FSYS 12 32 MHz 229
FRC Accuracy @ 8 MHz -2 2 % +25°C VDD = 3.0 - 3.6V 229
FRC Accuracy @ 8 MHz -5 5 % -40°C ≤ TA ≤ +85°C VDD = 3.0 - 3.6V 229
LPRC Accuracy @ 31 kHz -15 15 % -40°C ≤ TA ≤ +85°C VDD = 3.0 - 3.6V 229
Instruction Cycle Time TCY 62.5 ns 228
A/D Clock Period TAD 75 ns TCY = 75 ns, ADxCON3 is in default state 232
A/D Throughput Rate FCNV 500 ksps AVDD > 2.7V 232
A/D Integral Nonlinearity INL 2 LSb VINL = AVSS = VREFL = 0V, AVDD = VREFH = 3V 231
A/D Gain Error GERR 3 LSb VINL = AVSS = VREFL = 0V, AVDD = VREFH = 3V 231

CAD (KiCad official)

  • Symbol: PIC24FJ64GA006T-I
  • Footprint: Package_QFP:TQFP-64_10x10mm_P0.5mm
  • 3D model: TQFP-64(10x10) (KiCad packages3D, STEP)
  • 3D model files: pic24fj64ga006t-i-etched.step / pic24fj64ga006t-i-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pic24fj64ga006t-i.step / pic24fj64ga006t-i.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (258 pp, sha256 bb7c3ecb1fafd326, retrieved 2026-10-30, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF