main
Ray
Publish 0.1.0
accf320
PIC24FJ64GA006-I
Microchip Tech · MICROCHIP · TQFP-64(10x10)
PIC24FJ64GA006-I from Microchip Tech, in a TQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RE5/PMD5 | bidirectional | PORTE digital I/O (ST) shared with Parallel Master Port data bit 5 (ST/TTL). |
| 2 | RE6/PMD6 | bidirectional | PORTE digital I/O (ST) shared with Parallel Master Port data bit 6 (ST/TTL). |
| 3 | RE7/PMD7 | bidirectional | PORTE digital I/O (ST) shared with Parallel Master Port data bit 7 (ST/TTL). |
| 4 | RG6/SCK2/CN8/PMA5 | bidirectional | PORTG digital I/O shared with SPI2 serial clock, interrupt-on-change CN8 and PMP address bit 5 output. |
| 5 | RG7/SDI2/CN9/PMA4 | bidirectional | PORTG digital I/O shared with SPI2 serial data input, interrupt-on-change CN9 and PMP address bit 4 output. |
| 6 | RG8/SDO2/CN10/PMA3 | bidirectional | PORTG digital I/O shared with SPI2 serial data output, interrupt-on-change CN10 and PMP address bit 3 output. |
| 7 | MCLR | input | Master Clear (device Reset) input with Schmitt Trigger buffer; brought low to cause a Reset. |
| 8 | RG9/SS2/CN11/PMA2 | bidirectional | PORTG digital I/O shared with SPI2 slave select/frame select, interrupt-on-change CN11 and PMP address bit 2 output. |
| 9 | VSS | power_in | Ground reference for logic and I/O pins. |
| 10 | VDD | power_in | Positive supply for peripheral digital logic and I/O pins (2.0V to 3.6V operating range). |
| 11 | RB5/AN5/C1IN+/CN7 | bidirectional | PORTB digital I/O shared with A/D analog input AN5, comparator 1 positive input and interrupt-on-change CN7. |
| 12 | RB4/AN4/C1IN-/CN6 | bidirectional | PORTB digital I/O shared with A/D analog input AN4, comparator 1 negative input and interrupt-on-change CN6. |
| 13 | RB3/AN3/C2IN+/CN5 | bidirectional | PORTB digital I/O shared with A/D analog input AN3, comparator 2 positive input and interrupt-on-change CN5. |
| 14 | RB2/AN2/C2IN-/SS1/CN4 | bidirectional | PORTB digital I/O shared with A/D analog input AN2, comparator 2 negative input, SPI1 slave select and interrupt-on-change CN4. |
| 15 | RB1/AN1/VREF-/PGC1/EMUC1/CN3 | bidirectional | PORTB digital I/O shared with AN1, A/D and comparator low reference input VREF-, ICSP/debugger clock PGC1/EMUC1 and CN3. |
| 16 | RB0/AN0/VREF+/PGD1/EMUD1/PMA6/CN2 | bidirectional | PORTB digital I/O shared with AN0, A/D and comparator high reference input VREF+, ICSP/debugger data PGD1/EMUD1, PMA6 and CN2. |
| 17 | RB6/AN6/PGC2/EMUC2/OCFA | bidirectional | PORTB digital I/O shared with AN6, second ICSP/debugger clock PGC2/EMUC2 and Output Compare Fault A input. |
| 18 | RB7/AN7/PGD2/EMUD2 | bidirectional | PORTB digital I/O shared with AN7 and second ICSP/debugger data PGD2/EMUD2. |
| 19 | AVDD | power_in | Positive supply for analog modules; must always be connected. |
| 20 | AVSS | power_in | Ground reference for analog modules; must always be connected. |
| 21 | RB8/AN8/C1OUT/U2CTS | bidirectional | PORTB digital I/O shared with AN8, comparator 1 output and UART2 clear-to-send input. |
| 22 | RB9/AN9/C2OUT/PMA7 | bidirectional | PORTB digital I/O shared with AN9, comparator 2 output and PMP address bit 7 output. |
| 23 | RB10/AN10/CVREF/PMA13/TMS | bidirectional | PORTB digital I/O shared with AN10, comparator voltage reference output CVREF, PMA13 and JTAG Test Mode Select input. |
| 24 | RB11/AN11/PMA12/TDO | bidirectional | PORTB digital I/O shared with AN11, PMA12 and JTAG Test Data output. |
| 25 | VSS | power_in | Ground reference for logic and I/O pins. |
| 26 | VDD | power_in | Positive supply for peripheral digital logic and I/O pins (2.0V to 3.6V operating range). |
| 27 | RB12/AN12/PMA11/TCK | bidirectional | PORTB digital I/O shared with AN12, PMA11 and JTAG Test Clock/programming clock input. |
| 28 | RB13/AN13/PMA10/TDI | bidirectional | PORTB digital I/O shared with AN13, PMA10 and JTAG Test Data/programming data input. |
| 29 | RB14/AN14/PMA1/BCLK2/U2RTS | bidirectional | PORTB digital I/O shared with AN14, PMP address bit 1, UART2 IrDA baud clock and UART2 request-to-send output. |
| 30 | RB15/AN15/OCFB/PMA0/CN12 | bidirectional | PORTB digital I/O shared with AN15, Output Compare Fault B input, PMP address bit 0 and CN12. |
| 31 | RF4/SDA2/U2RX/PMA9/CN17 | bidirectional | PORTF digital I/O shared with I2C2 data, UART2 receive input, PMA9 and CN17. |
| 32 | RF5/SCL2/U2TX/PMA8/CN18 | bidirectional | PORTF digital I/O shared with I2C2 clock, UART2 transmit output, PMA8 and CN18. |
| 33 | RF3/SDO1/U1TX | bidirectional | PORTF digital I/O shared with SPI1 serial data output and UART1 transmit output. |
| 34 | RF2/SDI1/U1RX | bidirectional | PORTF digital I/O shared with SPI1 serial data input and UART1 receive input. |
| 35 | RF6/SCK1/INT0/BCLK1/U1RTS | bidirectional | PORTF digital I/O shared with SPI1 serial clock, external interrupt INT0, UART1 IrDA baud clock and UART1 request-to-send output. |
| 36 | RG3/SDA1 | bidirectional | PORTG digital I/O shared with I2C1 data input/output. |
| 37 | RG2/SCL1 | bidirectional | PORTG digital I/O shared with I2C1 clock input/output. |
| 38 | VDD | power_in | Positive supply for peripheral digital logic and I/O pins (2.0V to 3.6V operating range). |
| 39 | OSC1/CLKI/RC12 | bidirectional | Main oscillator input connection and main clock input, shared with PORTC digital I/O RC12. |
| 40 | OSC2/CLKO/RC15 | bidirectional | Main oscillator output connection and system clock output, shared with PORTC digital I/O RC15. |
| 41 | VSS | power_in | Ground reference for logic and I/O pins. |
| 42 | RD8/IC1/INT1/RTCC | bidirectional | PORTD digital I/O shared with input capture 1, external interrupt INT1 and real-time clock alarm output. |
| 43 | RD9/IC2/INT2/U1CTS | bidirectional | PORTD digital I/O shared with input capture 2, external interrupt INT2 and UART1 clear-to-send input. |
| 44 | RD10/IC3/INT3/PMCS2 | bidirectional | PORTD digital I/O shared with input capture 3, external interrupt INT3 and PMP chip select 2 strobe/address bit 15. |
| 45 | RD11/IC4/INT4/PMCS1 | bidirectional | PORTD digital I/O shared with input capture 4, external interrupt INT4 and PMP chip select 1 strobe/address bit 14. |
| 46 | RD0/OC1 | bidirectional | PORTD digital I/O shared with output compare/PWM 1 output. |
| 47 | RC13/SOSCI/CN1 | bidirectional | PORTC digital I/O shared with secondary oscillator/Timer1 clock input and interrupt-on-change CN1. |
| 48 | RC14/SOSCO/T1CK/CN0 | bidirectional | PORTC digital I/O shared with secondary oscillator/Timer1 clock output, Timer1 clock input and interrupt-on-change CN0. |
| 49 | RD1/OC2 | bidirectional | PORTD digital I/O shared with output compare/PWM 2 output. |
| 50 | RD2/OC3 | bidirectional | PORTD digital I/O shared with output compare/PWM 3 output. |
| 51 | RD3/OC4/PMBE | bidirectional | PORTD digital I/O shared with output compare/PWM 4 output and PMP byte enable strobe. |
| 52 | RD4/OC5/IC5/PMWR/CN13 | bidirectional | PORTD digital I/O shared with output compare/PWM 5 output, input capture 5, PMP write strobe and CN13. |
| 53 | RD5/PMRD/CN14 | bidirectional | PORTD digital I/O shared with PMP read strobe and interrupt-on-change CN14. |
| 54 | RD6/CN15 | bidirectional | PORTD digital I/O shared with interrupt-on-change CN15. |
| 55 | RD7/CN16 | bidirectional | PORTD digital I/O shared with interrupt-on-change CN16. |
| 56 | VCAP/VDDCORE | power_in | External filter capacitor connection when the regulator is enabled (low-ESR 10 µF to ground, not tied to VDD), or core logic supply when the regulator is disabled. |
| 57 | ENVREG | input | Enable for the on-chip voltage regulator; tie to VDD to enable or to ground to disable. |
| 58 | RF0 | bidirectional | PORTF digital I/O with Schmitt Trigger input. |
| 59 | RF1 | bidirectional | PORTF digital I/O with Schmitt Trigger input. |
| 60 | RE0/PMD0 | bidirectional | PORTE digital I/O shared with Parallel Master Port data bit 0. |
| 61 | RE1/PMD1 | bidirectional | PORTE digital I/O shared with Parallel Master Port data bit 1. |
| 62 | RE2/PMD2 | bidirectional | PORTE digital I/O shared with Parallel Master Port data bit 2. |
| 63 | RE3/PMD3 | bidirectional | PORTE digital I/O shared with Parallel Master Port data bit 3. |
| 64 | RE4/PMD4 | bidirectional | PORTE digital I/O shared with Parallel Master Port data bit 4. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | TQFP-64(10x10) |
| Category | Embedded Processors & Controllers |
| Pins | 64 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Ambient temperature under bias | -40 | 85 | °C | 217 | |||
| Storage temperature | -65 | 150 | °C | 217 | |||
| Voltage on VDD with respect to VSS | -0.3 | 4 | V | 217 | |||
| Voltage on any combined analog and digital pin and MCLR, with respect to VSS | -0.3 | V | max printed as (VDD + 0.3V) | 217 | |||
| Voltage on any digital only pin with respect to VSS | -0.3 | 6 | V | 217 | |||
| Voltage on VDDCORE with respect to VSS | -0.3 | 2.8 | V | 217 | |||
| Maximum output current sunk by any I/O pin | 25 | mA | 217 | ||||
| Maximum output current sourced by any I/O pin | 25 | mA | 217 | ||||
| Operating Junction Temperature Range | TJ | -40 | 125 | °C | 218 | ||
| Operating Ambient Temperature Range | TA | -40 | 85 | °C | 218 | ||
| Package Thermal Resistance, 10x10x1 mm TQFP | JA | 76.6 | °C/W | Junction to ambient (Note 1) | 218 | ||
| Supply Voltage (operating range) | VDD | 2 | 3.6 | V | Standard operating conditions | 218 | |
| Max MIPS | 16 | MIPS | VDD 2.0-3.6V, -40°C to +85°C | 218 | |||
| Supply Voltage VDD (regulator enabled) | VDD | 3.6 | V | Regulator is enabled | 218 | ||
| Core supply voltage VDDCORE (regulator disabled) | VDDCORE | 2 | 2.75 | V | Regulator is disabled | 218 | |
| RAM Data Retention Voltage | VDR | 1.5 | V | 218 | |||
| Brown-out Reset Voltage | VBOR | 1.9 | 2.2 | 2.5 | V | Regulator must be enabled | 218 |
| Operating Current (IDD) 2.5V | IDD | 1.6 | 4 | mA | -40°C; 2.5V(3); 1 MIPS | 219 | |
| Operating Current (IDD) 2.5V 4 MIPS | IDD | 6 | 12 | mA | -40°C; 2.5V(3); 4 MIPS | 219 | |
| Operating Current (IDD) 2.5V 16 MIPS | IDD | 20 | 32 | mA | -40°C; 2.5V(3); 16 MIPS | 219 | |
| Operating Current (IDD) LPRC | IDD | 70 | 150 | uA | -40°C; 2.5V(3); LPRC (31 kHz) | 219 | |
| Idle Current (IIDLE) 2.5V 1 MIPS | IIDLE | 0.7 | 2 | mA | -40°C; 2.5V(3); 1 MIPS | 220 | |
| Idle Current (IIDLE) 2.5V 16 MIPS | IIDLE | 6.8 | 8 | mA | -40°C; 2.5V(3); 16 MIPS | 220 | |
| Power-Down Current (IPD) base | IPD | 3 | 25 | uA | -40°C; 2.0V(3); base power-down current | 221 | |
| RTCC + Timer1 w/32 kHz crystal current | IRTCC | 8 | 15 | uA | -40°C; 2.0V(3) | 221 | |
| CNxx Pull-up Current | ICNPU | 50 | 250 | 400 | uA | AVDD = 3.3V, VPIN = VSS | 222 |
| Maximum Load Current for Digital High Detection w/Internal Pull-up | IPU | 30 | uA | AVDD = 2.0V | 222 | ||
| Maximum Load Current for Digital High Detection w/Internal Pull-up | IPU | 100 | uA | AVDD = 3.3V | 222 | ||
| Output Low Voltage I/O Ports | VOL | 0.4 | V | IOL = 8.5 mA, VDD = 3.6V | 223 | ||
| Output High Voltage I/O Ports | VOH | 3 | V | IOH = -3.0 mA, VDD = 3.6V | 223 | ||
| Output High Voltage I/O Ports | VOH | 2.4 | V | IOH = -6.0 mA, VDD = 3.6V | 223 | ||
| Output High Voltage I/O Ports | VOH | 1.65 | V | IOH = -1.0 mA, VDD = 2.0V | 223 | ||
| Output High Voltage I/O Ports | VOH | 1.4 | V | IOH = -3.0 mA, VDD = 2.0V | 223 | ||
| Total Input Injection Current | IICT | -20 | 20 | mA | Sum of all I/O and control pins | 224 | |
| Characteristic Retention | TRETD | 20 | Year | Provided no other specifications are violated | 225 | ||
| VDD for Self-Timed Erase/Write | VPEW | 2.25 | 3.6 | V | 225 | ||
| VDD for Read | VPR | 3.6 | V | VMIN = Minimum operating voltage | 225 | ||
| Input Offset Voltage | VIOFF | 10 | 30 | mV | 2.0V < VDD < 3.6V, -40°C < TA < +85°C | 226 | |
| Common Mode Rejection Ratio | CMRR | 55 | dB | 2.0V < VDD < 3.6V, -40°C < TA < +85°C | 226 | ||
| Response Time | TRESP | 150 | 400 | ns | Note 1 | 226 | |
| External Filter Capacitor Value | CEFC | 4.7 | 10 | uF | Series resistance < 3 Ohm recommended; < 5 Ohm required | 225 | |
| Input Capacitance OSC2/CLKO Pin | COSC2 | 15 | pF | In XT and HS modes when external clock is used to drive OSC1 | 227 | ||
| Capacitive Loading SCLx, SDAx | CB | 400 | pF | In I2C mode | 227 | ||
| External CLKI Frequency | FOSC | 32 | MHz | EC mode | 228 | ||
| External CLKI Frequency | FOSC | 3 | 8 | MHz | ECPLL mode | 228 | |
| Oscillator Frequency | FOSC | 3.5 | 10 | MHz | XT mode | 228 | |
| Oscillator Frequency | FOSC | 10 | 32 | MHz | HS mode | 228 | |
| Oscillator Frequency SOSC | FOSC | 31 | 33 | kHz | SOSC | 228 | |
| Instruction Cycle Time | TCY | 62.5 | ns | 228 | |||
| PLL Input Frequency Range | FPLLI | 3 | 8 | MHz | ECPLL, HSPLL, XTPLL modes | 229 | |
| PLL Output Frequency Range | FSYS | 12 | 32 | MHz | 229 | ||
| PLL Start-up Time (Lock Time) | TLOCK | 2 | ms | 229 | |||
| CLKO Stability (Jitter) | DCLK | -2 | 2 | % | 229 | ||
| Internal FRC Accuracy @ 8 MHz | F20 | -2 | 2 | % | +25°C, VDD = 3.0-3.6V | 229 | |
| LPRC @ 31 kHz accuracy | F21 | -15 | 15 | % | -40°C <= TA <= +85°C, VDD = 3.0-3.6V | 229 | |
| Port Output Rise Time | TIOR | 10 | 25 | ns | 230 | ||
| Port Output Fall Time | TIOF | 10 | 25 | ns | 230 | ||
| INTx Pin High or Low Time (output) | TINP | 20 | ns | 230 | |||
| A/D Clock Period | TAD | 75 | ns | TCY = 75 ns, ADxCON3 is in default state | 232 | ||
| Throughput Rate | FCNV | 500 | ksps | AVDD > 2.7V | 232 | ||
| Conversion Time | tCONV | 12 | TAD | 232 | |||
| Sample Time | tSAMP | 1 | TAD | 232 | |||
| Regulator Output Voltage | VRGOUT | 2.5 | V | 225 | |||
| Voltage Regulator Start-up Time | TVREG | 500 | us | ENVREG = VDD | 225 | ||
| Power-up Timer Period | TPWRT | 64 | ms | ENVREG = VSS | 225 |
CAD (KiCad official)
- Symbol:
PIC24FJ64GA006-I - Footprint:
Package_QFP:TQFP-64_10x10mm_P0.5mm - 3D model: TQFP-64(10x10) (KiCad packages3D, STEP)
- 3D model files:
pic24fj64ga006-i-etched.step/pic24fj64ga006-i-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic24fj64ga006-i.step/pic24fj64ga006-i.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (258 pp, sha256
bb7c3ecb1fafd326, retrieved 2026-11-08, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# PIC24FJ64GA006-I
**Microchip Tech** · MICROCHIP · TQFP-64(10x10)
PIC24FJ64GA006-I from Microchip Tech, in a TQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RE5/PMD5 | bidirectional | PORTE digital I/O (ST) shared with Parallel Master Port data bit 5 (ST/TTL). |
| 2 | RE6/PMD6 | bidirectional | PORTE digital I/O (ST) shared with Parallel Master Port data bit 6 (ST/TTL). |
| 3 | RE7/PMD7 | bidirectional | PORTE digital I/O (ST) shared with Parallel Master Port data bit 7 (ST/TTL). |
| 4 | RG6/SCK2/CN8/PMA5 | bidirectional | PORTG digital I/O shared with SPI2 serial clock, interrupt-on-change CN8 and PMP address bit 5 output. |
| 5 | RG7/SDI2/CN9/PMA4 | bidirectional | PORTG digital I/O shared with SPI2 serial data input, interrupt-on-change CN9 and PMP address bit 4 output. |
| 6 | RG8/SDO2/CN10/PMA3 | bidirectional | PORTG digital I/O shared with SPI2 serial data output, interrupt-on-change CN10 and PMP address bit 3 output. |
| 7 | MCLR | input | Master Clear (device Reset) input with Schmitt Trigger buffer; brought low to cause a Reset. |
| 8 | RG9/SS2/CN11/PMA2 | bidirectional | PORTG digital I/O shared with SPI2 slave select/frame select, interrupt-on-change CN11 and PMP address bit 2 output. |
| 9 | VSS | power_in | Ground reference for logic and I/O pins. |
| 10 | VDD | power_in | Positive supply for peripheral digital logic and I/O pins (2.0V to 3.6V operating range). |
| 11 | RB5/AN5/C1IN+/CN7 | bidirectional | PORTB digital I/O shared with A/D analog input AN5, comparator 1 positive input and interrupt-on-change CN7. |
| 12 | RB4/AN4/C1IN-/CN6 | bidirectional | PORTB digital I/O shared with A/D analog input AN4, comparator 1 negative input and interrupt-on-change CN6. |
| 13 | RB3/AN3/C2IN+/CN5 | bidirectional | PORTB digital I/O shared with A/D analog input AN3, comparator 2 positive input and interrupt-on-change CN5. |
| 14 | RB2/AN2/C2IN-/SS1/CN4 | bidirectional | PORTB digital I/O shared with A/D analog input AN2, comparator 2 negative input, SPI1 slave select and interrupt-on-change CN4. |
| 15 | RB1/AN1/VREF-/PGC1/EMUC1/CN3 | bidirectional | PORTB digital I/O shared with AN1, A/D and comparator low reference input VREF-, ICSP/debugger clock PGC1/EMUC1 and CN3. |
| 16 | RB0/AN0/VREF+/PGD1/EMUD1/PMA6/CN2 | bidirectional | PORTB digital I/O shared with AN0, A/D and comparator high reference input VREF+, ICSP/debugger data PGD1/EMUD1, PMA6 and CN2. |
| 17 | RB6/AN6/PGC2/EMUC2/OCFA | bidirectional | PORTB digital I/O shared with AN6, second ICSP/debugger clock PGC2/EMUC2 and Output Compare Fault A input. |
| 18 | RB7/AN7/PGD2/EMUD2 | bidirectional | PORTB digital I/O shared with AN7 and second ICSP/debugger data PGD2/EMUD2. |
| 19 | AVDD | power_in | Positive supply for analog modules; must always be connected. |
| 20 | AVSS | power_in | Ground reference for analog modules; must always be connected. |
| 21 | RB8/AN8/C1OUT/U2CTS | bidirectional | PORTB digital I/O shared with AN8, comparator 1 output and UART2 clear-to-send input. |
| 22 | RB9/AN9/C2OUT/PMA7 | bidirectional | PORTB digital I/O shared with AN9, comparator 2 output and PMP address bit 7 output. |
| 23 | RB10/AN10/CVREF/PMA13/TMS | bidirectional | PORTB digital I/O shared with AN10, comparator voltage reference output CVREF, PMA13 and JTAG Test Mode Select input. |
| 24 | RB11/AN11/PMA12/TDO | bidirectional | PORTB digital I/O shared with AN11, PMA12 and JTAG Test Data output. |
| 25 | VSS | power_in | Ground reference for logic and I/O pins. |
| 26 | VDD | power_in | Positive supply for peripheral digital logic and I/O pins (2.0V to 3.6V operating range). |
| 27 | RB12/AN12/PMA11/TCK | bidirectional | PORTB digital I/O shared with AN12, PMA11 and JTAG Test Clock/programming clock input. |
| 28 | RB13/AN13/PMA10/TDI | bidirectional | PORTB digital I/O shared with AN13, PMA10 and JTAG Test Data/programming data input. |
| 29 | RB14/AN14/PMA1/BCLK2/U2RTS | bidirectional | PORTB digital I/O shared with AN14, PMP address bit 1, UART2 IrDA baud clock and UART2 request-to-send output. |
| 30 | RB15/AN15/OCFB/PMA0/CN12 | bidirectional | PORTB digital I/O shared with AN15, Output Compare Fault B input, PMP address bit 0 and CN12. |
| 31 | RF4/SDA2/U2RX/PMA9/CN17 | bidirectional | PORTF digital I/O shared with I2C2 data, UART2 receive input, PMA9 and CN17. |
| 32 | RF5/SCL2/U2TX/PMA8/CN18 | bidirectional | PORTF digital I/O shared with I2C2 clock, UART2 transmit output, PMA8 and CN18. |
| 33 | RF3/SDO1/U1TX | bidirectional | PORTF digital I/O shared with SPI1 serial data output and UART1 transmit output. |
| 34 | RF2/SDI1/U1RX | bidirectional | PORTF digital I/O shared with SPI1 serial data input and UART1 receive input. |
| 35 | RF6/SCK1/INT0/BCLK1/U1RTS | bidirectional | PORTF digital I/O shared with SPI1 serial clock, external interrupt INT0, UART1 IrDA baud clock and UART1 request-to-send output. |
| 36 | RG3/SDA1 | bidirectional | PORTG digital I/O shared with I2C1 data input/output. |
| 37 | RG2/SCL1 | bidirectional | PORTG digital I/O shared with I2C1 clock input/output. |
| 38 | VDD | power_in | Positive supply for peripheral digital logic and I/O pins (2.0V to 3.6V operating range). |
| 39 | OSC1/CLKI/RC12 | bidirectional | Main oscillator input connection and main clock input, shared with PORTC digital I/O RC12. |
| 40 | OSC2/CLKO/RC15 | bidirectional | Main oscillator output connection and system clock output, shared with PORTC digital I/O RC15. |
| 41 | VSS | power_in | Ground reference for logic and I/O pins. |
| 42 | RD8/IC1/INT1/RTCC | bidirectional | PORTD digital I/O shared with input capture 1, external interrupt INT1 and real-time clock alarm output. |
| 43 | RD9/IC2/INT2/U1CTS | bidirectional | PORTD digital I/O shared with input capture 2, external interrupt INT2 and UART1 clear-to-send input. |
| 44 | RD10/IC3/INT3/PMCS2 | bidirectional | PORTD digital I/O shared with input capture 3, external interrupt INT3 and PMP chip select 2 strobe/address bit 15. |
| 45 | RD11/IC4/INT4/PMCS1 | bidirectional | PORTD digital I/O shared with input capture 4, external interrupt INT4 and PMP chip select 1 strobe/address bit 14. |
| 46 | RD0/OC1 | bidirectional | PORTD digital I/O shared with output compare/PWM 1 output. |
| 47 | RC13/SOSCI/CN1 | bidirectional | PORTC digital I/O shared with secondary oscillator/Timer1 clock input and interrupt-on-change CN1. |
| 48 | RC14/SOSCO/T1CK/CN0 | bidirectional | PORTC digital I/O shared with secondary oscillator/Timer1 clock output, Timer1 clock input and interrupt-on-change CN0. |
| 49 | RD1/OC2 | bidirectional | PORTD digital I/O shared with output compare/PWM 2 output. |
| 50 | RD2/OC3 | bidirectional | PORTD digital I/O shared with output compare/PWM 3 output. |
| 51 | RD3/OC4/PMBE | bidirectional | PORTD digital I/O shared with output compare/PWM 4 output and PMP byte enable strobe. |
| 52 | RD4/OC5/IC5/PMWR/CN13 | bidirectional | PORTD digital I/O shared with output compare/PWM 5 output, input capture 5, PMP write strobe and CN13. |
| 53 | RD5/PMRD/CN14 | bidirectional | PORTD digital I/O shared with PMP read strobe and interrupt-on-change CN14. |
| 54 | RD6/CN15 | bidirectional | PORTD digital I/O shared with interrupt-on-change CN15. |
| 55 | RD7/CN16 | bidirectional | PORTD digital I/O shared with interrupt-on-change CN16. |
| 56 | VCAP/VDDCORE | power_in | External filter capacitor connection when the regulator is enabled (low-ESR 10 µF to ground, not tied to VDD), or core logic supply when the regulator is disabled. |
| 57 | ENVREG | input | Enable for the on-chip voltage regulator; tie to VDD to enable or to ground to disable. |
| 58 | RF0 | bidirectional | PORTF digital I/O with Schmitt Trigger input. |
| 59 | RF1 | bidirectional | PORTF digital I/O with Schmitt Trigger input. |
| 60 | RE0/PMD0 | bidirectional | PORTE digital I/O shared with Parallel Master Port data bit 0. |
| 61 | RE1/PMD1 | bidirectional | PORTE digital I/O shared with Parallel Master Port data bit 1. |
| 62 | RE2/PMD2 | bidirectional | PORTE digital I/O shared with Parallel Master Port data bit 2. |
| 63 | RE3/PMD3 | bidirectional | PORTE digital I/O shared with Parallel Master Port data bit 3. |
| 64 | RE4/PMD4 | bidirectional | PORTE digital I/O shared with Parallel Master Port data bit 4. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | TQFP-64(10x10) |
| Category | Embedded Processors & Controllers |
| Pins | 64 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Ambient temperature under bias | | -40 | | 85 | °C | | 217 |
| Storage temperature | | -65 | | 150 | °C | | 217 |
| Voltage on VDD with respect to VSS | | -0.3 | | 4 | V | | 217 |
| Voltage on any combined analog and digital pin and MCLR, with respect to VSS | | -0.3 | | | V | max printed as (VDD + 0.3V) | 217 |
| Voltage on any digital only pin with respect to VSS | | -0.3 | | 6 | V | | 217 |
| Voltage on VDDCORE with respect to VSS | | -0.3 | | 2.8 | V | | 217 |
| Maximum output current sunk by any I/O pin | | | | 25 | mA | | 217 |
| Maximum output current sourced by any I/O pin | | | | 25 | mA | | 217 |
| Operating Junction Temperature Range | TJ | -40 | | 125 | °C | | 218 |
| Operating Ambient Temperature Range | TA | -40 | | 85 | °C | | 218 |
| Package Thermal Resistance, 10x10x1 mm TQFP | JA | | 76.6 | | °C/W | Junction to ambient (Note 1) | 218 |
| Supply Voltage (operating range) | VDD | 2 | | 3.6 | V | Standard operating conditions | 218 |
| Max MIPS | | | | 16 | MIPS | VDD 2.0-3.6V, -40°C to +85°C | 218 |
| Supply Voltage VDD (regulator enabled) | VDD | | | 3.6 | V | Regulator is enabled | 218 |
| Core supply voltage VDDCORE (regulator disabled) | VDDCORE | 2 | | 2.75 | V | Regulator is disabled | 218 |
| RAM Data Retention Voltage | VDR | 1.5 | | | V | | 218 |
| Brown-out Reset Voltage | VBOR | 1.9 | 2.2 | 2.5 | V | Regulator must be enabled | 218 |
| Operating Current (IDD) 2.5V | IDD | | 1.6 | 4 | mA | -40°C; 2.5V(3); 1 MIPS | 219 |
| Operating Current (IDD) 2.5V 4 MIPS | IDD | | 6 | 12 | mA | -40°C; 2.5V(3); 4 MIPS | 219 |
| Operating Current (IDD) 2.5V 16 MIPS | IDD | | 20 | 32 | mA | -40°C; 2.5V(3); 16 MIPS | 219 |
| Operating Current (IDD) LPRC | IDD | | 70 | 150 | uA | -40°C; 2.5V(3); LPRC (31 kHz) | 219 |
| Idle Current (IIDLE) 2.5V 1 MIPS | IIDLE | | 0.7 | 2 | mA | -40°C; 2.5V(3); 1 MIPS | 220 |
| Idle Current (IIDLE) 2.5V 16 MIPS | IIDLE | | 6.8 | 8 | mA | -40°C; 2.5V(3); 16 MIPS | 220 |
| Power-Down Current (IPD) base | IPD | | 3 | 25 | uA | -40°C; 2.0V(3); base power-down current | 221 |
| RTCC + Timer1 w/32 kHz crystal current | IRTCC | | 8 | 15 | uA | -40°C; 2.0V(3) | 221 |
| CNxx Pull-up Current | ICNPU | 50 | 250 | 400 | uA | AVDD = 3.3V, VPIN = VSS | 222 |
| Maximum Load Current for Digital High Detection w/Internal Pull-up | IPU | | | 30 | uA | AVDD = 2.0V | 222 |
| Maximum Load Current for Digital High Detection w/Internal Pull-up | IPU | | | 100 | uA | AVDD = 3.3V | 222 |
| Output Low Voltage I/O Ports | VOL | | | 0.4 | V | IOL = 8.5 mA, VDD = 3.6V | 223 |
| Output High Voltage I/O Ports | VOH | 3 | | | V | IOH = -3.0 mA, VDD = 3.6V | 223 |
| Output High Voltage I/O Ports | VOH | 2.4 | | | V | IOH = -6.0 mA, VDD = 3.6V | 223 |
| Output High Voltage I/O Ports | VOH | 1.65 | | | V | IOH = -1.0 mA, VDD = 2.0V | 223 |
| Output High Voltage I/O Ports | VOH | 1.4 | | | V | IOH = -3.0 mA, VDD = 2.0V | 223 |
| Total Input Injection Current | IICT | -20 | | 20 | mA | Sum of all I/O and control pins | 224 |
| Characteristic Retention | TRETD | 20 | | | Year | Provided no other specifications are violated | 225 |
| VDD for Self-Timed Erase/Write | VPEW | 2.25 | | 3.6 | V | | 225 |
| VDD for Read | VPR | | | 3.6 | V | VMIN = Minimum operating voltage | 225 |
| Input Offset Voltage | VIOFF | | 10 | 30 | mV | 2.0V < VDD < 3.6V, -40°C < TA < +85°C | 226 |
| Common Mode Rejection Ratio | CMRR | 55 | | | dB | 2.0V < VDD < 3.6V, -40°C < TA < +85°C | 226 |
| Response Time | TRESP | | 150 | 400 | ns | Note 1 | 226 |
| External Filter Capacitor Value | CEFC | 4.7 | 10 | | uF | Series resistance < 3 Ohm recommended; < 5 Ohm required | 225 |
| Input Capacitance OSC2/CLKO Pin | COSC2 | | | 15 | pF | In XT and HS modes when external clock is used to drive OSC1 | 227 |
| Capacitive Loading SCLx, SDAx | CB | | | 400 | pF | In I2C mode | 227 |
| External CLKI Frequency | FOSC | | | 32 | MHz | EC mode | 228 |
| External CLKI Frequency | FOSC | 3 | | 8 | MHz | ECPLL mode | 228 |
| Oscillator Frequency | FOSC | 3.5 | | 10 | MHz | XT mode | 228 |
| Oscillator Frequency | FOSC | 10 | | 32 | MHz | HS mode | 228 |
| Oscillator Frequency SOSC | FOSC | 31 | | 33 | kHz | SOSC | 228 |
| Instruction Cycle Time | TCY | 62.5 | | | ns | | 228 |
| PLL Input Frequency Range | FPLLI | 3 | | 8 | MHz | ECPLL, HSPLL, XTPLL modes | 229 |
| PLL Output Frequency Range | FSYS | 12 | | 32 | MHz | | 229 |
| PLL Start-up Time (Lock Time) | TLOCK | | | 2 | ms | | 229 |
| CLKO Stability (Jitter) | DCLK | -2 | | 2 | % | | 229 |
| Internal FRC Accuracy @ 8 MHz | F20 | -2 | | 2 | % | +25°C, VDD = 3.0-3.6V | 229 |
| LPRC @ 31 kHz accuracy | F21 | -15 | | 15 | % | -40°C <= TA <= +85°C, VDD = 3.0-3.6V | 229 |
| Port Output Rise Time | TIOR | | 10 | 25 | ns | | 230 |
| Port Output Fall Time | TIOF | | 10 | 25 | ns | | 230 |
| INTx Pin High or Low Time (output) | TINP | 20 | | | ns | | 230 |
| A/D Clock Period | TAD | 75 | | | ns | TCY = 75 ns, ADxCON3 is in default state | 232 |
| Throughput Rate | FCNV | | | 500 | ksps | AVDD > 2.7V | 232 |
| Conversion Time | tCONV | | 12 | | TAD | | 232 |
| Sample Time | tSAMP | | 1 | | TAD | | 232 |
| Regulator Output Voltage | VRGOUT | | 2.5 | | V | | 225 |
| Voltage Regulator Start-up Time | TVREG | | 500 | | us | ENVREG = VDD | 225 |
| Power-up Timer Period | TPWRT | | 64 | | ms | ENVREG = VSS | 225 |
## CAD (KiCad official)
- Symbol: `PIC24FJ64GA006-I`
- Footprint: `Package_QFP:TQFP-64_10x10mm_P0.5mm`
- 3D model: TQFP-64(10x10) (KiCad packages3D, STEP)
- 3D model files: `pic24fj64ga006-i-etched.step` / `pic24fj64ga006-i-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `pic24fj64ga006-i.step` / `pic24fj64ga006-i.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Microchip Tech datasheet](https://ww1.microchip.com/downloads/en/DeviceDoc/39747F.pdf) (258 pp, sha256 `bb7c3ecb1fafd326`, retrieved 2026-11-08, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/pic24fj64ga006-i-datasheet.pdf)