Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

PIC24FJ64GA006-I

Microchip Tech · MICROCHIP · TQFP-64(10x10)

PIC24FJ64GA006-I from Microchip Tech, in a TQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 RE5/PMD5 bidirectional PORTE digital I/O (ST) shared with Parallel Master Port data bit 5 (ST/TTL).
2 RE6/PMD6 bidirectional PORTE digital I/O (ST) shared with Parallel Master Port data bit 6 (ST/TTL).
3 RE7/PMD7 bidirectional PORTE digital I/O (ST) shared with Parallel Master Port data bit 7 (ST/TTL).
4 RG6/SCK2/CN8/PMA5 bidirectional PORTG digital I/O shared with SPI2 serial clock, interrupt-on-change CN8 and PMP address bit 5 output.
5 RG7/SDI2/CN9/PMA4 bidirectional PORTG digital I/O shared with SPI2 serial data input, interrupt-on-change CN9 and PMP address bit 4 output.
6 RG8/SDO2/CN10/PMA3 bidirectional PORTG digital I/O shared with SPI2 serial data output, interrupt-on-change CN10 and PMP address bit 3 output.
7 MCLR input Master Clear (device Reset) input with Schmitt Trigger buffer; brought low to cause a Reset.
8 RG9/SS2/CN11/PMA2 bidirectional PORTG digital I/O shared with SPI2 slave select/frame select, interrupt-on-change CN11 and PMP address bit 2 output.
9 VSS power_in Ground reference for logic and I/O pins.
10 VDD power_in Positive supply for peripheral digital logic and I/O pins (2.0V to 3.6V operating range).
11 RB5/AN5/C1IN+/CN7 bidirectional PORTB digital I/O shared with A/D analog input AN5, comparator 1 positive input and interrupt-on-change CN7.
12 RB4/AN4/C1IN-/CN6 bidirectional PORTB digital I/O shared with A/D analog input AN4, comparator 1 negative input and interrupt-on-change CN6.
13 RB3/AN3/C2IN+/CN5 bidirectional PORTB digital I/O shared with A/D analog input AN3, comparator 2 positive input and interrupt-on-change CN5.
14 RB2/AN2/C2IN-/SS1/CN4 bidirectional PORTB digital I/O shared with A/D analog input AN2, comparator 2 negative input, SPI1 slave select and interrupt-on-change CN4.
15 RB1/AN1/VREF-/PGC1/EMUC1/CN3 bidirectional PORTB digital I/O shared with AN1, A/D and comparator low reference input VREF-, ICSP/debugger clock PGC1/EMUC1 and CN3.
16 RB0/AN0/VREF+/PGD1/EMUD1/PMA6/CN2 bidirectional PORTB digital I/O shared with AN0, A/D and comparator high reference input VREF+, ICSP/debugger data PGD1/EMUD1, PMA6 and CN2.
17 RB6/AN6/PGC2/EMUC2/OCFA bidirectional PORTB digital I/O shared with AN6, second ICSP/debugger clock PGC2/EMUC2 and Output Compare Fault A input.
18 RB7/AN7/PGD2/EMUD2 bidirectional PORTB digital I/O shared with AN7 and second ICSP/debugger data PGD2/EMUD2.
19 AVDD power_in Positive supply for analog modules; must always be connected.
20 AVSS power_in Ground reference for analog modules; must always be connected.
21 RB8/AN8/C1OUT/U2CTS bidirectional PORTB digital I/O shared with AN8, comparator 1 output and UART2 clear-to-send input.
22 RB9/AN9/C2OUT/PMA7 bidirectional PORTB digital I/O shared with AN9, comparator 2 output and PMP address bit 7 output.
23 RB10/AN10/CVREF/PMA13/TMS bidirectional PORTB digital I/O shared with AN10, comparator voltage reference output CVREF, PMA13 and JTAG Test Mode Select input.
24 RB11/AN11/PMA12/TDO bidirectional PORTB digital I/O shared with AN11, PMA12 and JTAG Test Data output.
25 VSS power_in Ground reference for logic and I/O pins.
26 VDD power_in Positive supply for peripheral digital logic and I/O pins (2.0V to 3.6V operating range).
27 RB12/AN12/PMA11/TCK bidirectional PORTB digital I/O shared with AN12, PMA11 and JTAG Test Clock/programming clock input.
28 RB13/AN13/PMA10/TDI bidirectional PORTB digital I/O shared with AN13, PMA10 and JTAG Test Data/programming data input.
29 RB14/AN14/PMA1/BCLK2/U2RTS bidirectional PORTB digital I/O shared with AN14, PMP address bit 1, UART2 IrDA baud clock and UART2 request-to-send output.
30 RB15/AN15/OCFB/PMA0/CN12 bidirectional PORTB digital I/O shared with AN15, Output Compare Fault B input, PMP address bit 0 and CN12.
31 RF4/SDA2/U2RX/PMA9/CN17 bidirectional PORTF digital I/O shared with I2C2 data, UART2 receive input, PMA9 and CN17.
32 RF5/SCL2/U2TX/PMA8/CN18 bidirectional PORTF digital I/O shared with I2C2 clock, UART2 transmit output, PMA8 and CN18.
33 RF3/SDO1/U1TX bidirectional PORTF digital I/O shared with SPI1 serial data output and UART1 transmit output.
34 RF2/SDI1/U1RX bidirectional PORTF digital I/O shared with SPI1 serial data input and UART1 receive input.
35 RF6/SCK1/INT0/BCLK1/U1RTS bidirectional PORTF digital I/O shared with SPI1 serial clock, external interrupt INT0, UART1 IrDA baud clock and UART1 request-to-send output.
36 RG3/SDA1 bidirectional PORTG digital I/O shared with I2C1 data input/output.
37 RG2/SCL1 bidirectional PORTG digital I/O shared with I2C1 clock input/output.
38 VDD power_in Positive supply for peripheral digital logic and I/O pins (2.0V to 3.6V operating range).
39 OSC1/CLKI/RC12 bidirectional Main oscillator input connection and main clock input, shared with PORTC digital I/O RC12.
40 OSC2/CLKO/RC15 bidirectional Main oscillator output connection and system clock output, shared with PORTC digital I/O RC15.
41 VSS power_in Ground reference for logic and I/O pins.
42 RD8/IC1/INT1/RTCC bidirectional PORTD digital I/O shared with input capture 1, external interrupt INT1 and real-time clock alarm output.
43 RD9/IC2/INT2/U1CTS bidirectional PORTD digital I/O shared with input capture 2, external interrupt INT2 and UART1 clear-to-send input.
44 RD10/IC3/INT3/PMCS2 bidirectional PORTD digital I/O shared with input capture 3, external interrupt INT3 and PMP chip select 2 strobe/address bit 15.
45 RD11/IC4/INT4/PMCS1 bidirectional PORTD digital I/O shared with input capture 4, external interrupt INT4 and PMP chip select 1 strobe/address bit 14.
46 RD0/OC1 bidirectional PORTD digital I/O shared with output compare/PWM 1 output.
47 RC13/SOSCI/CN1 bidirectional PORTC digital I/O shared with secondary oscillator/Timer1 clock input and interrupt-on-change CN1.
48 RC14/SOSCO/T1CK/CN0 bidirectional PORTC digital I/O shared with secondary oscillator/Timer1 clock output, Timer1 clock input and interrupt-on-change CN0.
49 RD1/OC2 bidirectional PORTD digital I/O shared with output compare/PWM 2 output.
50 RD2/OC3 bidirectional PORTD digital I/O shared with output compare/PWM 3 output.
51 RD3/OC4/PMBE bidirectional PORTD digital I/O shared with output compare/PWM 4 output and PMP byte enable strobe.
52 RD4/OC5/IC5/PMWR/CN13 bidirectional PORTD digital I/O shared with output compare/PWM 5 output, input capture 5, PMP write strobe and CN13.
53 RD5/PMRD/CN14 bidirectional PORTD digital I/O shared with PMP read strobe and interrupt-on-change CN14.
54 RD6/CN15 bidirectional PORTD digital I/O shared with interrupt-on-change CN15.
55 RD7/CN16 bidirectional PORTD digital I/O shared with interrupt-on-change CN16.
56 VCAP/VDDCORE power_in External filter capacitor connection when the regulator is enabled (low-ESR 10 µF to ground, not tied to VDD), or core logic supply when the regulator is disabled.
57 ENVREG input Enable for the on-chip voltage regulator; tie to VDD to enable or to ground to disable.
58 RF0 bidirectional PORTF digital I/O with Schmitt Trigger input.
59 RF1 bidirectional PORTF digital I/O with Schmitt Trigger input.
60 RE0/PMD0 bidirectional PORTE digital I/O shared with Parallel Master Port data bit 0.
61 RE1/PMD1 bidirectional PORTE digital I/O shared with Parallel Master Port data bit 1.
62 RE2/PMD2 bidirectional PORTE digital I/O shared with Parallel Master Port data bit 2.
63 RE3/PMD3 bidirectional PORTE digital I/O shared with Parallel Master Port data bit 3.
64 RE4/PMD4 bidirectional PORTE digital I/O shared with Parallel Master Port data bit 4.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package TQFP-64(10x10)
Category Embedded Processors & Controllers
Pins 64

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Ambient temperature under bias -40 85 °C 217
Storage temperature -65 150 °C 217
Voltage on VDD with respect to VSS -0.3 4 V 217
Voltage on any combined analog and digital pin and MCLR, with respect to VSS -0.3 V max printed as (VDD + 0.3V) 217
Voltage on any digital only pin with respect to VSS -0.3 6 V 217
Voltage on VDDCORE with respect to VSS -0.3 2.8 V 217
Maximum output current sunk by any I/O pin 25 mA 217
Maximum output current sourced by any I/O pin 25 mA 217
Operating Junction Temperature Range TJ -40 125 °C 218
Operating Ambient Temperature Range TA -40 85 °C 218
Package Thermal Resistance, 10x10x1 mm TQFP JA 76.6 °C/W Junction to ambient (Note 1) 218
Supply Voltage (operating range) VDD 2 3.6 V Standard operating conditions 218
Max MIPS 16 MIPS VDD 2.0-3.6V, -40°C to +85°C 218
Supply Voltage VDD (regulator enabled) VDD 3.6 V Regulator is enabled 218
Core supply voltage VDDCORE (regulator disabled) VDDCORE 2 2.75 V Regulator is disabled 218
RAM Data Retention Voltage VDR 1.5 V 218
Brown-out Reset Voltage VBOR 1.9 2.2 2.5 V Regulator must be enabled 218
Operating Current (IDD) 2.5V IDD 1.6 4 mA -40°C; 2.5V(3); 1 MIPS 219
Operating Current (IDD) 2.5V 4 MIPS IDD 6 12 mA -40°C; 2.5V(3); 4 MIPS 219
Operating Current (IDD) 2.5V 16 MIPS IDD 20 32 mA -40°C; 2.5V(3); 16 MIPS 219
Operating Current (IDD) LPRC IDD 70 150 uA -40°C; 2.5V(3); LPRC (31 kHz) 219
Idle Current (IIDLE) 2.5V 1 MIPS IIDLE 0.7 2 mA -40°C; 2.5V(3); 1 MIPS 220
Idle Current (IIDLE) 2.5V 16 MIPS IIDLE 6.8 8 mA -40°C; 2.5V(3); 16 MIPS 220
Power-Down Current (IPD) base IPD 3 25 uA -40°C; 2.0V(3); base power-down current 221
RTCC + Timer1 w/32 kHz crystal current IRTCC 8 15 uA -40°C; 2.0V(3) 221
CNxx Pull-up Current ICNPU 50 250 400 uA AVDD = 3.3V, VPIN = VSS 222
Maximum Load Current for Digital High Detection w/Internal Pull-up IPU 30 uA AVDD = 2.0V 222
Maximum Load Current for Digital High Detection w/Internal Pull-up IPU 100 uA AVDD = 3.3V 222
Output Low Voltage I/O Ports VOL 0.4 V IOL = 8.5 mA, VDD = 3.6V 223
Output High Voltage I/O Ports VOH 3 V IOH = -3.0 mA, VDD = 3.6V 223
Output High Voltage I/O Ports VOH 2.4 V IOH = -6.0 mA, VDD = 3.6V 223
Output High Voltage I/O Ports VOH 1.65 V IOH = -1.0 mA, VDD = 2.0V 223
Output High Voltage I/O Ports VOH 1.4 V IOH = -3.0 mA, VDD = 2.0V 223
Total Input Injection Current IICT -20 20 mA Sum of all I/O and control pins 224
Characteristic Retention TRETD 20 Year Provided no other specifications are violated 225
VDD for Self-Timed Erase/Write VPEW 2.25 3.6 V 225
VDD for Read VPR 3.6 V VMIN = Minimum operating voltage 225
Input Offset Voltage VIOFF 10 30 mV 2.0V < VDD < 3.6V, -40°C < TA < +85°C 226
Common Mode Rejection Ratio CMRR 55 dB 2.0V < VDD < 3.6V, -40°C < TA < +85°C 226
Response Time TRESP 150 400 ns Note 1 226
External Filter Capacitor Value CEFC 4.7 10 uF Series resistance < 3 Ohm recommended; < 5 Ohm required 225
Input Capacitance OSC2/CLKO Pin COSC2 15 pF In XT and HS modes when external clock is used to drive OSC1 227
Capacitive Loading SCLx, SDAx CB 400 pF In I2C mode 227
External CLKI Frequency FOSC 32 MHz EC mode 228
External CLKI Frequency FOSC 3 8 MHz ECPLL mode 228
Oscillator Frequency FOSC 3.5 10 MHz XT mode 228
Oscillator Frequency FOSC 10 32 MHz HS mode 228
Oscillator Frequency SOSC FOSC 31 33 kHz SOSC 228
Instruction Cycle Time TCY 62.5 ns 228
PLL Input Frequency Range FPLLI 3 8 MHz ECPLL, HSPLL, XTPLL modes 229
PLL Output Frequency Range FSYS 12 32 MHz 229
PLL Start-up Time (Lock Time) TLOCK 2 ms 229
CLKO Stability (Jitter) DCLK -2 2 % 229
Internal FRC Accuracy @ 8 MHz F20 -2 2 % +25°C, VDD = 3.0-3.6V 229
LPRC @ 31 kHz accuracy F21 -15 15 % -40°C <= TA <= +85°C, VDD = 3.0-3.6V 229
Port Output Rise Time TIOR 10 25 ns 230
Port Output Fall Time TIOF 10 25 ns 230
INTx Pin High or Low Time (output) TINP 20 ns 230
A/D Clock Period TAD 75 ns TCY = 75 ns, ADxCON3 is in default state 232
Throughput Rate FCNV 500 ksps AVDD > 2.7V 232
Conversion Time tCONV 12 TAD 232
Sample Time tSAMP 1 TAD 232
Regulator Output Voltage VRGOUT 2.5 V 225
Voltage Regulator Start-up Time TVREG 500 us ENVREG = VDD 225
Power-up Timer Period TPWRT 64 ms ENVREG = VSS 225

CAD (KiCad official)

  • Symbol: PIC24FJ64GA006-I
  • Footprint: Package_QFP:TQFP-64_10x10mm_P0.5mm
  • 3D model: TQFP-64(10x10) (KiCad packages3D, STEP)
  • 3D model files: pic24fj64ga006-i-etched.step / pic24fj64ga006-i-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pic24fj64ga006-i.step / pic24fj64ga006-i.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (258 pp, sha256 bb7c3ecb1fafd326, retrieved 2026-11-08, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF