main
Ray Publish 0.1.0 2748f64

PIC24FJ128GA006-I

Microchip Tech · Pre-ordered MCUs · TQFP-64(10x10)

PIC24FJ128GA006-I from Microchip Tech, in a TQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 RE5 bidirectional PORTE digital I/O with Schmitt Trigger input buffer, shared with Parallel Master Port data bit PMD5.
2 RE6 bidirectional PORTE digital I/O with Schmitt Trigger input buffer, shared with Parallel Master Port data bit PMD6.
3 RE7 bidirectional PORTE digital I/O with Schmitt Trigger input buffer, shared with Parallel Master Port data bit PMD7.
4 RG6 bidirectional PORTG digital I/O with Schmitt Trigger input buffer, also interrupt-on-change input CN8, PMP address output PMA5, and SPI2 serial clock SCK2.
5 RG7 bidirectional PORTG digital I/O with Schmitt Trigger input buffer, also interrupt-on-change input CN9, PMP address output PMA4, and SPI2 serial data input SDI2.
6 RG8 bidirectional PORTG digital I/O with Schmitt Trigger input buffer, also interrupt-on-change input CN10, PMP address output PMA3, and SPI2 serial data output SDO2.
7 MCLR input Master Clear (device Reset) input; this line is brought low to cause a Reset.
8 RG9 bidirectional PORTG digital I/O with Schmitt Trigger input buffer, also interrupt-on-change input CN11, PMP address output PMA2, and SPI2 slave select input/frame select output SS2.
9 VSS power_in Ground reference for logic and I/O pins.
10 VDD power_in Positive supply for peripheral digital logic and I/O pins.
11 RB5 bidirectional PORTB digital I/O with Schmitt Trigger input buffer, also A/D analog input AN5, comparator 1 positive input C1IN+, and interrupt-on-change input CN7.
12 RB4 bidirectional PORTB digital I/O with Schmitt Trigger input buffer, also A/D analog input AN4, comparator 1 negative input C1IN-, and interrupt-on-change input CN6.
13 RB3 bidirectional PORTB digital I/O with Schmitt Trigger input buffer, also A/D analog input AN3, comparator 2 positive input C2IN+, and interrupt-on-change input CN5.
14 RB2 bidirectional PORTB digital I/O with Schmitt Trigger input buffer, also A/D analog input AN2, comparator 2 negative input C2IN-, interrupt-on-change input CN4, and SPI1 slave select SS1.
15 RB1 bidirectional PORTB digital I/O with Schmitt Trigger input buffer, also A/D analog input AN1, A/D and comparator low reference input VREF-, interrupt-on-change input CN3, and ICSP/debug clock PGC1 with EMUC1.
16 RB0 bidirectional PORTB digital I/O with Schmitt Trigger input buffer, also A/D analog input AN0, high reference input VREF+, interrupt-on-change input CN2, PMP address output PMA6, and ICSP/debug data PGD1 with EMUD1.
17 RB6 bidirectional PORTB digital I/O with Schmitt Trigger input buffer, also A/D analog input AN6, Output Compare Fault A input OCFA, and ICSP/debug clock PGC2 with EMUC2.
18 RB7 bidirectional PORTB digital I/O with Schmitt Trigger input buffer, also A/D analog input AN7, and ICSP/debug data PGD2 with EMUD2.
19 AVDD power_in Positive supply for analog modules; must always be connected regardless of whether analog modules are used.
20 AVSS power_in Ground reference for analog modules; must always be connected regardless of whether analog modules are used.
21 RB8 bidirectional PORTB digital I/O with Schmitt Trigger input buffer, also A/D analog input AN8, comparator 1 output C1OUT, and UART2 clear-to-send input U2CTS.
22 RB9 bidirectional PORTB digital I/O with Schmitt Trigger input buffer, also A/D analog input AN9, comparator 2 output C2OUT, and PMP address output PMA7.
23 RB10 bidirectional PORTB digital I/O with Schmitt Trigger input buffer, also A/D analog input AN10, comparator voltage reference output CVREF, PMP address output PMA13, and JTAG test mode select input TMS.
24 RB11 bidirectional PORTB digital I/O with Schmitt Trigger input buffer, also A/D analog input AN11, PMP address output PMA12, and JTAG test data output TDO.
25 VSS power_in Ground reference for logic and I/O pins.
26 VDD power_in Positive supply for peripheral digital logic and I/O pins.
27 RB12 bidirectional PORTB digital I/O with Schmitt Trigger input buffer, also A/D analog input AN12, PMP address output PMA11, and JTAG test clock input TCK.
28 RB13 bidirectional PORTB digital I/O with Schmitt Trigger input buffer, also A/D analog input AN13, PMP address output PMA10, and JTAG test data input TDI.
29 RB14 bidirectional PORTB digital I/O with Schmitt Trigger input buffer, also A/D analog input AN14, PMP address output PMA1, UART2 IrDA baud clock BCLK2, and UART2 request-to-send output U2RTS.
30 RB15 bidirectional PORTB digital I/O with Schmitt Trigger input buffer, also A/D analog input AN15, PMP address output PMA0, interrupt-on-change input CN12, and Output Compare Fault B input OCFB.
31 RF4 bidirectional PORTF digital I/O with Schmitt Trigger input buffer, also I2C2 data SDA2, UART2 receive input U2RX, and interrupt-on-change input CN17.
32 RF5 bidirectional PORTF digital I/O with Schmitt Trigger input buffer, also I2C2 clock SCL2, UART2 transmit output U2TX, PMP address output PMA8, and interrupt-on-change input CN18.
33 RF3 bidirectional PORTF digital I/O with Schmitt Trigger input buffer, also SPI1 serial data output SDO1 and UART1 transmit output U1TX.
34 RF2 bidirectional PORTF digital I/O with Schmitt Trigger input buffer, also SPI1 serial data input SDI1 and UART1 receive input U1RX.
35 RF6 bidirectional PORTF digital I/O with Schmitt Trigger input buffer, also external interrupt input INT0, SPI1 serial clock SCK1, UART1 request-to-send output U1RTS, and UART1 IrDA baud clock BCLK1.
36 RG3 bidirectional PORTG digital I/O with Schmitt Trigger input buffer, also I2C1 data SDA1.
37 RG2 bidirectional PORTG digital I/O with Schmitt Trigger input buffer, also I2C1 clock SCL1.
38 VDD power_in Positive supply for peripheral digital logic and I/O pins.
39 OSC1/CLKI/RC12 bidirectional Main oscillator input connection (OSC1/CLKI), also PORTC digital I/O RC12 with Schmitt Trigger input buffer.
40 OSC2/CLKO/RC15 bidirectional Main oscillator output connection (OSC2) that also provides the system clock output CLKO, also PORTC digital I/O RC15 with Schmitt Trigger input buffer.
41 VSS power_in Ground reference for logic and I/O pins.
42 RD8 bidirectional PORTD digital I/O with Schmitt Trigger input buffer, also input capture input IC1, external interrupt input INT1, and RTCC alarm output RTCC.
43 RD9 bidirectional PORTD digital I/O with Schmitt Trigger input buffer, also input capture input IC2, external interrupt input INT2, and UART1 clear-to-send input U1CTS.
44 RD10 bidirectional PORTD digital I/O with Schmitt Trigger input buffer, also input capture input IC3, external interrupt input INT3, and Parallel Master Port chip select 2 output PMCS2.
45 RD11 bidirectional PORTD digital I/O with Schmitt Trigger input buffer, also input capture input IC4, external interrupt input INT4, and Parallel Master Port chip select 1 PMCS1.
46 RD0 bidirectional PORTD digital I/O with Schmitt Trigger input buffer, also Output Compare/PWM output OC1.
47 RC13/SOSCI bidirectional PORTC digital I/O with Schmitt Trigger input buffer, also secondary oscillator/Timer1 clock input SOSCI and interrupt-on-change input CN1.
48 RC14/SOSCO bidirectional PORTC digital I/O with Schmitt Trigger input buffer, also secondary oscillator/Timer1 clock output SOSCO, Timer1 clock input T1CK, and interrupt-on-change input CN0.
49 RD1 bidirectional PORTD digital I/O with Schmitt Trigger input buffer, also Output Compare/PWM output OC2.
50 RD2 bidirectional PORTD digital I/O with Schmitt Trigger input buffer, also Output Compare/PWM output OC3.
51 RD3 bidirectional PORTD digital I/O with Schmitt Trigger input buffer, also Output Compare/PWM output OC4 and Parallel Master Port byte enable strobe PMBE.
52 RD4 bidirectional PORTD digital I/O with Schmitt Trigger input buffer, also Output Compare/PWM output OC5, input capture input IC5, interrupt-on-change input CN13, and Parallel Master Port write strobe PMWR.
53 RD5 bidirectional PORTD digital I/O with Schmitt Trigger input buffer, also Parallel Master Port read strobe PMRD and interrupt-on-change input CN14.
54 RD6 bidirectional PORTD digital I/O with Schmitt Trigger input buffer, also interrupt-on-change input CN15.
55 RD7 bidirectional PORTD digital I/O with Schmitt Trigger input buffer, also interrupt-on-change input CN16.
56 VDDCAP/VDDCORE power_in External filter capacitor connection when the on-chip regulator is enabled, or positive supply for core logic when the regulator is disabled.
57 ENVREG input Enable for on-chip voltage regulator; must be tied directly to VDD to enable the regulator or to ground to disable it.
58 RF0 bidirectional PORTF digital I/O with Schmitt Trigger input buffer.
59 RF1 bidirectional PORTF digital I/O with Schmitt Trigger input buffer.
60 RE0 bidirectional PORTE digital I/O with Schmitt Trigger input buffer, shared with Parallel Master Port data bit PMD0.
61 RE1 bidirectional PORTE digital I/O with Schmitt Trigger input buffer, shared with Parallel Master Port data bit PMD1.
62 RE2 bidirectional PORTE digital I/O with Schmitt Trigger input buffer, shared with Parallel Master Port data bit PMD2.
63 RE3 bidirectional PORTE digital I/O with Schmitt Trigger input buffer, shared with Parallel Master Port data bit PMD3.
64 RE4 bidirectional PORTE digital I/O with Schmitt Trigger input buffer, shared with Parallel Master Port data bit PMD4.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package TQFP-64(10x10)
Category Embedded Processors & Controllers
Pins 64

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Ambient temperature under bias -40 85 °C 217
Storage temperature -65 150 °C 217
Voltage on VDD with respect to VSS -0.3 4 V 217
Voltage on any combined analog and digital pin and MCLR, with respect to VSS -0.3 V 217
Voltage on any digital only pin with respect to VSS -0.3 6 V 217
Voltage on VDDCORE with respect to VSS -0.3 2.8 V 217
Maximum output current sunk by any I/O pin 25 mA 217
Maximum output current sourced by any I/O pin 25 mA 217
Operating junction temperature range TJ -40 125 °C 218
Operating ambient temperature range TA -40 85 °C 218
Package thermal resistance, 10x10x1 mm TQFP, junction to ambient JA 76.6 °C/W 218
Operating voltage range VDD 2 3.6 V Temp range -40°C to +85°C; Max MIPS 16 218
Supply voltage, on-chip regulator enabled (DC10) VDD 3.6 V Regulator is enabled 218
Supply voltage, on-chip regulator disabled (DC10) VDD 3.6 V Regulator is disabled 218
Core supply voltage, on-chip regulator disabled (DC10) VDDCORE 2 2.75 V Regulator is disabled 218
RAM data retention voltage (DC12) VDR 1.5 V 218
VDD rise rate to ensure internal Power-on Reset signal (DC17) SVDD 0.05 V/ms 0-3.3V in 0.1s; 0-2.5V in 60 ms 218
Brown-out Reset voltage (DC18) VBOR 1.9 2.2 2.5 V Regulator must be enabled 218
Program Flash cell endurance (D130) EP 100 E/W -40C to +85C 225
VDD for read (D131) VPR 3.6 V VMIN = Minimum operating voltage 225
VDD for self-timed erase/write (D132B) VPEW 2.25 3.6 V 225
Characteristic retention (D134) TRETD 20 Year Provided no other specifications are violated 225
External filter capacitor value CEFC 4.7 10 µF Series resistance < 3 Ohm recommended; < 5 Ohm required. 225
Band gap reference start-up time TBG 1 ms 225
Operating current, 2.5V regulator disabled, 1 MIPS (DC20b) IDD 1.6 4 mA +85°C; 2.5V (regulator disabled); 1 MIPS 219
Operating current, 2.5V regulator disabled, 4 MIPS (DC23b) IDD 6 12 mA +85°C; 2.5V (regulator disabled); 4 MIPS 219
Operating current, 2.5V regulator disabled, 16 MIPS (DC24b) IDD 20 32 mA +85°C; 2.5V (regulator disabled); 16 MIPS 219
Operating current, 3.6V regulator enabled, 1 MIPS (DC20f) IDD 1.6 4 mA +85°C; 3.6V (regulator enabled); 1 MIPS 219
Operating current, 3.6V regulator enabled, 4 MIPS (DC23f) IDD 6 12 mA +85°C; 3.6V (regulator enabled); 4 MIPS 219
Operating current, 3.6V regulator enabled, 16 MIPS (DC24f) IDD 20 32 mA +85°C; 3.6V (regulator enabled); 16 MIPS 219
Idle current, core off, clock on, 2.5V regulator disabled, 1 MIPS (DC40b) IIDLE 0.7 2 mA +85°C; 2.5V (regulator disabled); 1 MIPS 220
Idle current, core off, clock on, 2.5V regulator disabled, 16 MIPS (DC47b) IIDLE 6.8 8 mA +85°C; 2.5V (regulator disabled); 16 MIPS 220
Base power-down current, 2.0V regulator disabled (DC60b) IPD 100 600 µA +85°C; 2.0V (regulator disabled) 221
SMBus input low voltage, I/O pins (DI19) VIL 0.8 V SMBus enabled 222
CNxx pull-up current (DI30) ICNPU 50 250 400 µA AVDD = 3.3V, VPIN = VSS 222
Maximum load current for digital high detection with internal pull-up (DI31) IPU 30 µA AVDD = 2.0V 222
Maximum load current for digital high detection with internal pull-up (DI31) IPU 100 µA AVDD = 3.3V 222
Input leakage current, I/O ports with analog functions (DI50) IIL 50 1000 nA Pin at high-impedance; VSS ≤ VPIN ≤ VDD 222
Input leakage current, digital only I/O ports (DI50) IIL 50 1000 nA Pin at high-impedance; VSS ≤ VPIN ≤ 5.5V 222
Output low voltage, I/O ports (DO10) VOL 0.4 V IOL = 8.5 mA, VDD = 3.6V 223
Output high voltage, I/O ports (DO20) VOH 3 V IOH = -3.0 mA, VDD = 3.6V 223
Output high voltage, I/O ports (DO20) VOH 2.4 V IOH = -6.0 mA, VDD = 3.6V 223
Output high voltage, I/O ports (DO20) VOH 1.65 V IOH = -1.0 mA, VDD = 2.0V 223
Output high voltage, I/O ports (DO20) VOH 1.4 V IOH = -3.0 mA, VDD = 2.0V 223
Input offset voltage (D300) VIOFF 10 30 mV 226
Common mode rejection ratio (D302) CMRR 55 dB 226
Comparator response time (300) TRESP 150 400 ns One input at (VDD, 1.5)/2, other input transitions from VSS to VDD 226
Comparator mode change to output valid (301) TMC2OV 10 µs 226
Instruction cycle time (OS25) TCY 62.5 ns 228
External clock rise or fall time, EC mode (OS31) TosR, TosF 20 ns EC mode 228
PLL input frequency range (OS50) FPLLI 3 8 MHz ECPLL, HSPLL, XTPLL modes 229
PLL output frequency range (OS51) FSYS 12 32 MHz 229
PLL start-up time, lock time (OS52) TLOCK 2 ms 229
A/D module clock period (AD50) TAD 75 ns TCY = 75 ns, ADxCON3 is in default state 232
Throughput rate (AD56) FCNV 500 ksps AVDD > 2.7V 232

CAD (KiCad official)

  • Symbol: PIC24FJ128GA006-I
  • Footprint: Package_QFP:TQFP-64_10x10mm_P0.5mm
  • 3D model: TQFP-64(10x10) (KiCad packages3D, STEP)
  • 3D model files: pic24fj128ga006-i-etched.step / pic24fj128ga006-i-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pic24fj128ga006-i.step / pic24fj128ga006-i.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (258 pp, sha256 bb7c3ecb1fafd326, retrieved 2026-10-29, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF