Generated by kicad-footprint-generator · KiCad file format 20260206
PIC24FJ128GA006-I
Microchip Tech · Pre-ordered MCUs · TQFP-64(10x10)
PIC24FJ128GA006-I from Microchip Tech, in a TQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RE5 | bidirectional | PORTE digital I/O with Schmitt Trigger input buffer, shared with Parallel Master Port data bit PMD5. |
| 2 | RE6 | bidirectional | PORTE digital I/O with Schmitt Trigger input buffer, shared with Parallel Master Port data bit PMD6. |
| 3 | RE7 | bidirectional | PORTE digital I/O with Schmitt Trigger input buffer, shared with Parallel Master Port data bit PMD7. |
| 4 | RG6 | bidirectional | PORTG digital I/O with Schmitt Trigger input buffer, also interrupt-on-change input CN8, PMP address output PMA5, and SPI2 serial clock SCK2. |
| 5 | RG7 | bidirectional | PORTG digital I/O with Schmitt Trigger input buffer, also interrupt-on-change input CN9, PMP address output PMA4, and SPI2 serial data input SDI2. |
| 6 | RG8 | bidirectional | PORTG digital I/O with Schmitt Trigger input buffer, also interrupt-on-change input CN10, PMP address output PMA3, and SPI2 serial data output SDO2. |
| 7 | MCLR | input | Master Clear (device Reset) input; this line is brought low to cause a Reset. |
| 8 | RG9 | bidirectional | PORTG digital I/O with Schmitt Trigger input buffer, also interrupt-on-change input CN11, PMP address output PMA2, and SPI2 slave select input/frame select output SS2. |
| 9 | VSS | power_in | Ground reference for logic and I/O pins. |
| 10 | VDD | power_in | Positive supply for peripheral digital logic and I/O pins. |
| 11 | RB5 | bidirectional | PORTB digital I/O with Schmitt Trigger input buffer, also A/D analog input AN5, comparator 1 positive input C1IN+, and interrupt-on-change input CN7. |
| 12 | RB4 | bidirectional | PORTB digital I/O with Schmitt Trigger input buffer, also A/D analog input AN4, comparator 1 negative input C1IN-, and interrupt-on-change input CN6. |
| 13 | RB3 | bidirectional | PORTB digital I/O with Schmitt Trigger input buffer, also A/D analog input AN3, comparator 2 positive input C2IN+, and interrupt-on-change input CN5. |
| 14 | RB2 | bidirectional | PORTB digital I/O with Schmitt Trigger input buffer, also A/D analog input AN2, comparator 2 negative input C2IN-, interrupt-on-change input CN4, and SPI1 slave select SS1. |
| 15 | RB1 | bidirectional | PORTB digital I/O with Schmitt Trigger input buffer, also A/D analog input AN1, A/D and comparator low reference input VREF-, interrupt-on-change input CN3, and ICSP/debug clock PGC1 with EMUC1. |
| 16 | RB0 | bidirectional | PORTB digital I/O with Schmitt Trigger input buffer, also A/D analog input AN0, high reference input VREF+, interrupt-on-change input CN2, PMP address output PMA6, and ICSP/debug data PGD1 with EMUD1. |
| 17 | RB6 | bidirectional | PORTB digital I/O with Schmitt Trigger input buffer, also A/D analog input AN6, Output Compare Fault A input OCFA, and ICSP/debug clock PGC2 with EMUC2. |
| 18 | RB7 | bidirectional | PORTB digital I/O with Schmitt Trigger input buffer, also A/D analog input AN7, and ICSP/debug data PGD2 with EMUD2. |
| 19 | AVDD | power_in | Positive supply for analog modules; must always be connected regardless of whether analog modules are used. |
| 20 | AVSS | power_in | Ground reference for analog modules; must always be connected regardless of whether analog modules are used. |
| 21 | RB8 | bidirectional | PORTB digital I/O with Schmitt Trigger input buffer, also A/D analog input AN8, comparator 1 output C1OUT, and UART2 clear-to-send input U2CTS. |
| 22 | RB9 | bidirectional | PORTB digital I/O with Schmitt Trigger input buffer, also A/D analog input AN9, comparator 2 output C2OUT, and PMP address output PMA7. |
| 23 | RB10 | bidirectional | PORTB digital I/O with Schmitt Trigger input buffer, also A/D analog input AN10, comparator voltage reference output CVREF, PMP address output PMA13, and JTAG test mode select input TMS. |
| 24 | RB11 | bidirectional | PORTB digital I/O with Schmitt Trigger input buffer, also A/D analog input AN11, PMP address output PMA12, and JTAG test data output TDO. |
| 25 | VSS | power_in | Ground reference for logic and I/O pins. |
| 26 | VDD | power_in | Positive supply for peripheral digital logic and I/O pins. |
| 27 | RB12 | bidirectional | PORTB digital I/O with Schmitt Trigger input buffer, also A/D analog input AN12, PMP address output PMA11, and JTAG test clock input TCK. |
| 28 | RB13 | bidirectional | PORTB digital I/O with Schmitt Trigger input buffer, also A/D analog input AN13, PMP address output PMA10, and JTAG test data input TDI. |
| 29 | RB14 | bidirectional | PORTB digital I/O with Schmitt Trigger input buffer, also A/D analog input AN14, PMP address output PMA1, UART2 IrDA baud clock BCLK2, and UART2 request-to-send output U2RTS. |
| 30 | RB15 | bidirectional | PORTB digital I/O with Schmitt Trigger input buffer, also A/D analog input AN15, PMP address output PMA0, interrupt-on-change input CN12, and Output Compare Fault B input OCFB. |
| 31 | RF4 | bidirectional | PORTF digital I/O with Schmitt Trigger input buffer, also I2C2 data SDA2, UART2 receive input U2RX, and interrupt-on-change input CN17. |
| 32 | RF5 | bidirectional | PORTF digital I/O with Schmitt Trigger input buffer, also I2C2 clock SCL2, UART2 transmit output U2TX, PMP address output PMA8, and interrupt-on-change input CN18. |
| 33 | RF3 | bidirectional | PORTF digital I/O with Schmitt Trigger input buffer, also SPI1 serial data output SDO1 and UART1 transmit output U1TX. |
| 34 | RF2 | bidirectional | PORTF digital I/O with Schmitt Trigger input buffer, also SPI1 serial data input SDI1 and UART1 receive input U1RX. |
| 35 | RF6 | bidirectional | PORTF digital I/O with Schmitt Trigger input buffer, also external interrupt input INT0, SPI1 serial clock SCK1, UART1 request-to-send output U1RTS, and UART1 IrDA baud clock BCLK1. |
| 36 | RG3 | bidirectional | PORTG digital I/O with Schmitt Trigger input buffer, also I2C1 data SDA1. |
| 37 | RG2 | bidirectional | PORTG digital I/O with Schmitt Trigger input buffer, also I2C1 clock SCL1. |
| 38 | VDD | power_in | Positive supply for peripheral digital logic and I/O pins. |
| 39 | OSC1/CLKI/RC12 | bidirectional | Main oscillator input connection (OSC1/CLKI), also PORTC digital I/O RC12 with Schmitt Trigger input buffer. |
| 40 | OSC2/CLKO/RC15 | bidirectional | Main oscillator output connection (OSC2) that also provides the system clock output CLKO, also PORTC digital I/O RC15 with Schmitt Trigger input buffer. |
| 41 | VSS | power_in | Ground reference for logic and I/O pins. |
| 42 | RD8 | bidirectional | PORTD digital I/O with Schmitt Trigger input buffer, also input capture input IC1, external interrupt input INT1, and RTCC alarm output RTCC. |
| 43 | RD9 | bidirectional | PORTD digital I/O with Schmitt Trigger input buffer, also input capture input IC2, external interrupt input INT2, and UART1 clear-to-send input U1CTS. |
| 44 | RD10 | bidirectional | PORTD digital I/O with Schmitt Trigger input buffer, also input capture input IC3, external interrupt input INT3, and Parallel Master Port chip select 2 output PMCS2. |
| 45 | RD11 | bidirectional | PORTD digital I/O with Schmitt Trigger input buffer, also input capture input IC4, external interrupt input INT4, and Parallel Master Port chip select 1 PMCS1. |
| 46 | RD0 | bidirectional | PORTD digital I/O with Schmitt Trigger input buffer, also Output Compare/PWM output OC1. |
| 47 | RC13/SOSCI | bidirectional | PORTC digital I/O with Schmitt Trigger input buffer, also secondary oscillator/Timer1 clock input SOSCI and interrupt-on-change input CN1. |
| 48 | RC14/SOSCO | bidirectional | PORTC digital I/O with Schmitt Trigger input buffer, also secondary oscillator/Timer1 clock output SOSCO, Timer1 clock input T1CK, and interrupt-on-change input CN0. |
| 49 | RD1 | bidirectional | PORTD digital I/O with Schmitt Trigger input buffer, also Output Compare/PWM output OC2. |
| 50 | RD2 | bidirectional | PORTD digital I/O with Schmitt Trigger input buffer, also Output Compare/PWM output OC3. |
| 51 | RD3 | bidirectional | PORTD digital I/O with Schmitt Trigger input buffer, also Output Compare/PWM output OC4 and Parallel Master Port byte enable strobe PMBE. |
| 52 | RD4 | bidirectional | PORTD digital I/O with Schmitt Trigger input buffer, also Output Compare/PWM output OC5, input capture input IC5, interrupt-on-change input CN13, and Parallel Master Port write strobe PMWR. |
| 53 | RD5 | bidirectional | PORTD digital I/O with Schmitt Trigger input buffer, also Parallel Master Port read strobe PMRD and interrupt-on-change input CN14. |
| 54 | RD6 | bidirectional | PORTD digital I/O with Schmitt Trigger input buffer, also interrupt-on-change input CN15. |
| 55 | RD7 | bidirectional | PORTD digital I/O with Schmitt Trigger input buffer, also interrupt-on-change input CN16. |
| 56 | VDDCAP/VDDCORE | power_in | External filter capacitor connection when the on-chip regulator is enabled, or positive supply for core logic when the regulator is disabled. |
| 57 | ENVREG | input | Enable for on-chip voltage regulator; must be tied directly to VDD to enable the regulator or to ground to disable it. |
| 58 | RF0 | bidirectional | PORTF digital I/O with Schmitt Trigger input buffer. |
| 59 | RF1 | bidirectional | PORTF digital I/O with Schmitt Trigger input buffer. |
| 60 | RE0 | bidirectional | PORTE digital I/O with Schmitt Trigger input buffer, shared with Parallel Master Port data bit PMD0. |
| 61 | RE1 | bidirectional | PORTE digital I/O with Schmitt Trigger input buffer, shared with Parallel Master Port data bit PMD1. |
| 62 | RE2 | bidirectional | PORTE digital I/O with Schmitt Trigger input buffer, shared with Parallel Master Port data bit PMD2. |
| 63 | RE3 | bidirectional | PORTE digital I/O with Schmitt Trigger input buffer, shared with Parallel Master Port data bit PMD3. |
| 64 | RE4 | bidirectional | PORTE digital I/O with Schmitt Trigger input buffer, shared with Parallel Master Port data bit PMD4. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | TQFP-64(10x10) |
| Category | Embedded Processors & Controllers |
| Pins | 64 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Ambient temperature under bias | -40 | 85 | °C | 217 | |||
| Storage temperature | -65 | 150 | °C | 217 | |||
| Voltage on VDD with respect to VSS | -0.3 | 4 | V | 217 | |||
| Voltage on any combined analog and digital pin and MCLR, with respect to VSS | -0.3 | V | 217 | ||||
| Voltage on any digital only pin with respect to VSS | -0.3 | 6 | V | 217 | |||
| Voltage on VDDCORE with respect to VSS | -0.3 | 2.8 | V | 217 | |||
| Maximum output current sunk by any I/O pin | 25 | mA | 217 | ||||
| Maximum output current sourced by any I/O pin | 25 | mA | 217 | ||||
| Operating junction temperature range | TJ | -40 | 125 | °C | 218 | ||
| Operating ambient temperature range | TA | -40 | 85 | °C | 218 | ||
| Package thermal resistance, 10x10x1 mm TQFP, junction to ambient | JA | 76.6 | °C/W | 218 | |||
| Operating voltage range | VDD | 2 | 3.6 | V | Temp range -40°C to +85°C; Max MIPS 16 | 218 | |
| Supply voltage, on-chip regulator enabled (DC10) | VDD | 3.6 | V | Regulator is enabled | 218 | ||
| Supply voltage, on-chip regulator disabled (DC10) | VDD | 3.6 | V | Regulator is disabled | 218 | ||
| Core supply voltage, on-chip regulator disabled (DC10) | VDDCORE | 2 | 2.75 | V | Regulator is disabled | 218 | |
| RAM data retention voltage (DC12) | VDR | 1.5 | V | 218 | |||
| VDD rise rate to ensure internal Power-on Reset signal (DC17) | SVDD | 0.05 | V/ms | 0-3.3V in 0.1s; 0-2.5V in 60 ms | 218 | ||
| Brown-out Reset voltage (DC18) | VBOR | 1.9 | 2.2 | 2.5 | V | Regulator must be enabled | 218 |
| Program Flash cell endurance (D130) | EP | 100 | E/W | -40C to +85C | 225 | ||
| VDD for read (D131) | VPR | 3.6 | V | VMIN = Minimum operating voltage | 225 | ||
| VDD for self-timed erase/write (D132B) | VPEW | 2.25 | 3.6 | V | 225 | ||
| Characteristic retention (D134) | TRETD | 20 | Year | Provided no other specifications are violated | 225 | ||
| External filter capacitor value | CEFC | 4.7 | 10 | µF | Series resistance < 3 Ohm recommended; < 5 Ohm required. | 225 | |
| Band gap reference start-up time | TBG | 1 | ms | 225 | |||
| Operating current, 2.5V regulator disabled, 1 MIPS (DC20b) | IDD | 1.6 | 4 | mA | +85°C; 2.5V (regulator disabled); 1 MIPS | 219 | |
| Operating current, 2.5V regulator disabled, 4 MIPS (DC23b) | IDD | 6 | 12 | mA | +85°C; 2.5V (regulator disabled); 4 MIPS | 219 | |
| Operating current, 2.5V regulator disabled, 16 MIPS (DC24b) | IDD | 20 | 32 | mA | +85°C; 2.5V (regulator disabled); 16 MIPS | 219 | |
| Operating current, 3.6V regulator enabled, 1 MIPS (DC20f) | IDD | 1.6 | 4 | mA | +85°C; 3.6V (regulator enabled); 1 MIPS | 219 | |
| Operating current, 3.6V regulator enabled, 4 MIPS (DC23f) | IDD | 6 | 12 | mA | +85°C; 3.6V (regulator enabled); 4 MIPS | 219 | |
| Operating current, 3.6V regulator enabled, 16 MIPS (DC24f) | IDD | 20 | 32 | mA | +85°C; 3.6V (regulator enabled); 16 MIPS | 219 | |
| Idle current, core off, clock on, 2.5V regulator disabled, 1 MIPS (DC40b) | IIDLE | 0.7 | 2 | mA | +85°C; 2.5V (regulator disabled); 1 MIPS | 220 | |
| Idle current, core off, clock on, 2.5V regulator disabled, 16 MIPS (DC47b) | IIDLE | 6.8 | 8 | mA | +85°C; 2.5V (regulator disabled); 16 MIPS | 220 | |
| Base power-down current, 2.0V regulator disabled (DC60b) | IPD | 100 | 600 | µA | +85°C; 2.0V (regulator disabled) | 221 | |
| SMBus input low voltage, I/O pins (DI19) | VIL | 0.8 | V | SMBus enabled | 222 | ||
| CNxx pull-up current (DI30) | ICNPU | 50 | 250 | 400 | µA | AVDD = 3.3V, VPIN = VSS | 222 |
| Maximum load current for digital high detection with internal pull-up (DI31) | IPU | 30 | µA | AVDD = 2.0V | 222 | ||
| Maximum load current for digital high detection with internal pull-up (DI31) | IPU | 100 | µA | AVDD = 3.3V | 222 | ||
| Input leakage current, I/O ports with analog functions (DI50) | IIL | 50 | 1000 | nA | Pin at high-impedance; VSS ≤ VPIN ≤ VDD | 222 | |
| Input leakage current, digital only I/O ports (DI50) | IIL | 50 | 1000 | nA | Pin at high-impedance; VSS ≤ VPIN ≤ 5.5V | 222 | |
| Output low voltage, I/O ports (DO10) | VOL | 0.4 | V | IOL = 8.5 mA, VDD = 3.6V | 223 | ||
| Output high voltage, I/O ports (DO20) | VOH | 3 | V | IOH = -3.0 mA, VDD = 3.6V | 223 | ||
| Output high voltage, I/O ports (DO20) | VOH | 2.4 | V | IOH = -6.0 mA, VDD = 3.6V | 223 | ||
| Output high voltage, I/O ports (DO20) | VOH | 1.65 | V | IOH = -1.0 mA, VDD = 2.0V | 223 | ||
| Output high voltage, I/O ports (DO20) | VOH | 1.4 | V | IOH = -3.0 mA, VDD = 2.0V | 223 | ||
| Input offset voltage (D300) | VIOFF | 10 | 30 | mV | 226 | ||
| Common mode rejection ratio (D302) | CMRR | 55 | dB | 226 | |||
| Comparator response time (300) | TRESP | 150 | 400 | ns | One input at (VDD, 1.5)/2, other input transitions from VSS to VDD | 226 | |
| Comparator mode change to output valid (301) | TMC2OV | 10 | µs | 226 | |||
| Instruction cycle time (OS25) | TCY | 62.5 | ns | 228 | |||
| External clock rise or fall time, EC mode (OS31) | TosR, TosF | 20 | ns | EC mode | 228 | ||
| PLL input frequency range (OS50) | FPLLI | 3 | 8 | MHz | ECPLL, HSPLL, XTPLL modes | 229 | |
| PLL output frequency range (OS51) | FSYS | 12 | 32 | MHz | 229 | ||
| PLL start-up time, lock time (OS52) | TLOCK | 2 | ms | 229 | |||
| A/D module clock period (AD50) | TAD | 75 | ns | TCY = 75 ns, ADxCON3 is in default state | 232 | ||
| Throughput rate (AD56) | FCNV | 500 | ksps | AVDD > 2.7V | 232 |
CAD (KiCad official)
- Symbol:
PIC24FJ128GA006-I - Footprint:
Package_QFP:TQFP-64_10x10mm_P0.5mm - 3D model: TQFP-64(10x10) (KiCad packages3D, STEP)
- 3D model files:
pic24fj128ga006-i-etched.step/pic24fj128ga006-i-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic24fj128ga006-i.step/pic24fj128ga006-i.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (258 pp, sha256
bb7c3ecb1fafd326, retrieved 2026-10-29, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).