Generated by kicad-footprint-generator · KiCad file format 20260206
PIC18LF4520T-I
Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · QFN-44-EP(8x8)
PIC18LF4520T-I from Microchip Tech, in a QFN-44-EP(8x8). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RC7/RX/DT | bidirectional | PORTC bit 7 digital I/O (ST), EUSART asynchronous receive input or synchronous data. |
| 2 | RD4/PSP4 | bidirectional | PORTD bit 4 digital I/O (ST) or Parallel Client Port data (TTL). |
| 3 | RD5/PSP5/P1B | bidirectional | PORTD bit 5 digital I/O (ST), Parallel Client Port data, or Enhanced CCP1 output P1B. |
| 4 | RD6/PSP6/P1C | bidirectional | PORTD bit 6 digital I/O (ST), Parallel Client Port data, or Enhanced CCP1 output P1C. |
| 5 | RD7/PSP7/P1D | bidirectional | PORTD bit 7 digital I/O (ST), Parallel Client Port data, or Enhanced CCP1 output P1D. |
| 6 | VSS | power_in | Ground reference for logic and I/O pins. |
| 7 | VDD | power_in | Positive supply for logic and I/O pins. |
| 8 | VDD | power_in | Positive supply for logic and I/O pins. |
| 9 | RB0/INT0/FLT0/AN12 | bidirectional | PORTB bit 0 digital I/O (TTL) with weak pull-up option, external interrupt 0, PWM fault input for Enhanced CCP1, or analog input 12. |
| 10 | RB1/INT1/AN10 | bidirectional | PORTB bit 1 digital I/O (TTL) with weak pull-up option, external interrupt 1, or analog input 10. |
| 11 | RB2/INT2/AN8 | bidirectional | PORTB bit 2 digital I/O (TTL) with weak pull-up option, external interrupt 2, or analog input 8. |
| 12 | RB3/AN9/CCP2 | bidirectional | PORTB bit 3 digital I/O (TTL), analog input 9, or alternate Capture 2 input/Compare 2 output/PWM2 output when CCP2MX is cleared. |
| 13 | NC | unconnected | No connect. |
| 14 | RB4/KBI0/AN11 | bidirectional | PORTB bit 4 digital I/O (TTL), interrupt-on-change pin, or analog input 11. |
| 15 | RB5/KBI1/PGM | bidirectional | PORTB bit 5 digital I/O (TTL), interrupt-on-change pin, or low-voltage ICSP programming enable pin. |
| 16 | RB6/KBI2/PGC | bidirectional | PORTB bit 6 digital I/O (TTL), interrupt-on-change pin, or In-Circuit Debugger and ICSP programming clock pin. |
| 17 | RB7/KBI3/PGD | bidirectional | PORTB bit 7 digital I/O (TTL), interrupt-on-change pin, or In-Circuit Debugger and ICSP programming data pin. |
| 18 | MCLR/VPP/RE3 | input | Active-low Master Clear (Reset) input, programming voltage input, or digital input RE3 when MCLR is disabled (ST). |
| 19 | RA0/AN0 | bidirectional | PORTA bit 0 digital I/O (TTL) or analog input 0. |
| 20 | RA1/AN1 | bidirectional | PORTA bit 1 digital I/O (TTL) or analog input 1. |
| 21 | RA2/AN2/VREF-/CVREF | bidirectional | PORTA bit 2 digital I/O (TTL), analog input 2, A/D reference voltage (low) input, or comparator reference voltage output. |
| 22 | RA3/AN3/VREF+ | bidirectional | PORTA bit 3 digital I/O (TTL), analog input 3, or A/D reference voltage (high) input. |
| 23 | RA4/T0CKI/C1OUT | bidirectional | PORTA bit 4 digital I/O (ST), Timer0 external clock input, or Comparator 1 output. |
| 24 | RA5/AN4/SS/HLVDIN/C2OUT | bidirectional | PORTA bit 5 digital I/O (TTL), analog input 4, SPI Client select input, High/Low-Voltage Detect input, or Comparator 2 output. |
| 25 | RE0/RD/AN5 | bidirectional | PORTE bit 0 digital I/O (ST), Parallel Client Port read control input, or analog input 5. |
| 26 | RE1/WR/AN6 | bidirectional | PORTE bit 1 digital I/O (ST), Parallel Client Port write control input, or analog input 6. |
| 27 | RE2/CS/AN7 | bidirectional | PORTE bit 2 digital I/O (ST), Parallel Client Port chip select input, or analog input 7. |
| 28 | VDD | power_in | Positive supply for logic and I/O pins. |
| 29 | VDD | power_in | Positive supply for logic and I/O pins. |
| 30 | VSS | power_in | Ground reference for logic and I/O pins. |
| 31 | VSS | power_in | Ground reference for logic and I/O pins. |
| 32 | OSC1/CLKI/RA7 | bidirectional | Oscillator crystal or external clock input, or general purpose I/O RA7 (TTL) in internal/IO oscillator modes. |
| 33 | OSC2/CLKO/RA6 | bidirectional | Oscillator crystal output, FOSC/4 clock output in RC mode, or general purpose I/O RA6 (TTL). |
| 34 | RC0/T1OSO/T13CKI | bidirectional | PORTC bit 0 digital I/O (ST), Timer1 oscillator output, or Timer1/Timer3 external clock input. |
| 35 | RC1/T1OSI/CCP2 | bidirectional | PORTC bit 1 digital I/O (ST), Timer1 oscillator input, or Capture 2 input/Compare 2 output/PWM2 output (default CCP2 pin). |
| 36 | RC2/CCP1/P1A | bidirectional | PORTC bit 2 digital I/O (ST), Capture 1 input/Compare 1 output/PWM1 output, or Enhanced CCP1 output P1A. |
| 37 | RC3/SCK/SCL | bidirectional | PORTC bit 3 digital I/O (ST), synchronous serial clock for SPI mode, or for I2C mode. |
| 38 | RD0/PSP0 | bidirectional | PORTD bit 0 digital I/O (ST) or Parallel Client Port data (TTL). |
| 39 | RD1/PSP1 | bidirectional | PORTD bit 1 digital I/O (ST) or Parallel Client Port data (TTL). |
| 40 | RD2/PSP2 | bidirectional | PORTD bit 2 digital I/O (ST) or Parallel Client Port data (TTL). |
| 41 | RD3/PSP3 | bidirectional | PORTD bit 3 digital I/O (ST) or Parallel Client Port data (TTL). |
| 42 | RC4/SDI/SDA | bidirectional | PORTC bit 4 digital I/O (ST), SPI data in, or I2C data I/O. |
| 43 | RC5/SDO | bidirectional | PORTC bit 5 digital I/O (ST) or SPI data out. |
| 44 | RC6/TX/CK | bidirectional | PORTC bit 6 digital I/O (ST), EUSART asynchronous transmit, or EUSART synchronous clock. |
| 45 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | QFN-44-EP(8x8) |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 45 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating supply voltage range (LF devices) | VDD | 2 | 5.5 | V | Low-voltage parts designated LF | 6 | |
| Operating frequency | 40 | MHz | DC, 40 MHz | 7 | |||
| Maximum recommended source impedance for analog A/D sources | RS | 2.5 | kΩ | A/D analog input sources | 219 |
CAD (KiCad official)
- Symbol:
PIC18LF4520T-I - Footprint:
Package_DFN_QFN:QFN-44-1EP_8x8mm_P0.65mm_EP6.45x6.45mm - 3D model: QFN-44-EP(8x8) (KiCad packages3D, STEP)
- 3D model files:
pic18lf4520t-i-etched.step/pic18lf4520t-i-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic18lf4520t-i.step/pic18lf4520t-i.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (383 pp, sha256
7a3ba485a1cab451, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).