Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

PIC18LF4520T-I

Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · QFN-44-EP(8x8)

PIC18LF4520T-I from Microchip Tech, in a QFN-44-EP(8x8). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 RC7/RX/DT bidirectional PORTC bit 7 digital I/O (ST), EUSART asynchronous receive input or synchronous data.
2 RD4/PSP4 bidirectional PORTD bit 4 digital I/O (ST) or Parallel Client Port data (TTL).
3 RD5/PSP5/P1B bidirectional PORTD bit 5 digital I/O (ST), Parallel Client Port data, or Enhanced CCP1 output P1B.
4 RD6/PSP6/P1C bidirectional PORTD bit 6 digital I/O (ST), Parallel Client Port data, or Enhanced CCP1 output P1C.
5 RD7/PSP7/P1D bidirectional PORTD bit 7 digital I/O (ST), Parallel Client Port data, or Enhanced CCP1 output P1D.
6 VSS power_in Ground reference for logic and I/O pins.
7 VDD power_in Positive supply for logic and I/O pins.
8 VDD power_in Positive supply for logic and I/O pins.
9 RB0/INT0/FLT0/AN12 bidirectional PORTB bit 0 digital I/O (TTL) with weak pull-up option, external interrupt 0, PWM fault input for Enhanced CCP1, or analog input 12.
10 RB1/INT1/AN10 bidirectional PORTB bit 1 digital I/O (TTL) with weak pull-up option, external interrupt 1, or analog input 10.
11 RB2/INT2/AN8 bidirectional PORTB bit 2 digital I/O (TTL) with weak pull-up option, external interrupt 2, or analog input 8.
12 RB3/AN9/CCP2 bidirectional PORTB bit 3 digital I/O (TTL), analog input 9, or alternate Capture 2 input/Compare 2 output/PWM2 output when CCP2MX is cleared.
13 NC unconnected No connect.
14 RB4/KBI0/AN11 bidirectional PORTB bit 4 digital I/O (TTL), interrupt-on-change pin, or analog input 11.
15 RB5/KBI1/PGM bidirectional PORTB bit 5 digital I/O (TTL), interrupt-on-change pin, or low-voltage ICSP programming enable pin.
16 RB6/KBI2/PGC bidirectional PORTB bit 6 digital I/O (TTL), interrupt-on-change pin, or In-Circuit Debugger and ICSP programming clock pin.
17 RB7/KBI3/PGD bidirectional PORTB bit 7 digital I/O (TTL), interrupt-on-change pin, or In-Circuit Debugger and ICSP programming data pin.
18 MCLR/VPP/RE3 input Active-low Master Clear (Reset) input, programming voltage input, or digital input RE3 when MCLR is disabled (ST).
19 RA0/AN0 bidirectional PORTA bit 0 digital I/O (TTL) or analog input 0.
20 RA1/AN1 bidirectional PORTA bit 1 digital I/O (TTL) or analog input 1.
21 RA2/AN2/VREF-/CVREF bidirectional PORTA bit 2 digital I/O (TTL), analog input 2, A/D reference voltage (low) input, or comparator reference voltage output.
22 RA3/AN3/VREF+ bidirectional PORTA bit 3 digital I/O (TTL), analog input 3, or A/D reference voltage (high) input.
23 RA4/T0CKI/C1OUT bidirectional PORTA bit 4 digital I/O (ST), Timer0 external clock input, or Comparator 1 output.
24 RA5/AN4/SS/HLVDIN/C2OUT bidirectional PORTA bit 5 digital I/O (TTL), analog input 4, SPI Client select input, High/Low-Voltage Detect input, or Comparator 2 output.
25 RE0/RD/AN5 bidirectional PORTE bit 0 digital I/O (ST), Parallel Client Port read control input, or analog input 5.
26 RE1/WR/AN6 bidirectional PORTE bit 1 digital I/O (ST), Parallel Client Port write control input, or analog input 6.
27 RE2/CS/AN7 bidirectional PORTE bit 2 digital I/O (ST), Parallel Client Port chip select input, or analog input 7.
28 VDD power_in Positive supply for logic and I/O pins.
29 VDD power_in Positive supply for logic and I/O pins.
30 VSS power_in Ground reference for logic and I/O pins.
31 VSS power_in Ground reference for logic and I/O pins.
32 OSC1/CLKI/RA7 bidirectional Oscillator crystal or external clock input, or general purpose I/O RA7 (TTL) in internal/IO oscillator modes.
33 OSC2/CLKO/RA6 bidirectional Oscillator crystal output, FOSC/4 clock output in RC mode, or general purpose I/O RA6 (TTL).
34 RC0/T1OSO/T13CKI bidirectional PORTC bit 0 digital I/O (ST), Timer1 oscillator output, or Timer1/Timer3 external clock input.
35 RC1/T1OSI/CCP2 bidirectional PORTC bit 1 digital I/O (ST), Timer1 oscillator input, or Capture 2 input/Compare 2 output/PWM2 output (default CCP2 pin).
36 RC2/CCP1/P1A bidirectional PORTC bit 2 digital I/O (ST), Capture 1 input/Compare 1 output/PWM1 output, or Enhanced CCP1 output P1A.
37 RC3/SCK/SCL bidirectional PORTC bit 3 digital I/O (ST), synchronous serial clock for SPI mode, or for I2C mode.
38 RD0/PSP0 bidirectional PORTD bit 0 digital I/O (ST) or Parallel Client Port data (TTL).
39 RD1/PSP1 bidirectional PORTD bit 1 digital I/O (ST) or Parallel Client Port data (TTL).
40 RD2/PSP2 bidirectional PORTD bit 2 digital I/O (ST) or Parallel Client Port data (TTL).
41 RD3/PSP3 bidirectional PORTD bit 3 digital I/O (ST) or Parallel Client Port data (TTL).
42 RC4/SDI/SDA bidirectional PORTC bit 4 digital I/O (ST), SPI data in, or I2C data I/O.
43 RC5/SDO bidirectional PORTC bit 5 digital I/O (ST) or SPI data out.
44 RC6/TX/CK bidirectional PORTC bit 6 digital I/O (ST), EUSART asynchronous transmit, or EUSART synchronous clock.
45 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package QFN-44-EP(8x8)
Category Single Chip Microcomputer/Microcontroller
Pins 45

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Operating supply voltage range (LF devices) VDD 2 5.5 V Low-voltage parts designated LF 6
Operating frequency 40 MHz DC, 40 MHz 7
Maximum recommended source impedance for analog A/D sources RS 2.5 kΩ A/D analog input sources 219

CAD (KiCad official)

  • Symbol: PIC18LF4520T-I
  • Footprint: Package_DFN_QFN:QFN-44-1EP_8x8mm_P0.65mm_EP6.45x6.45mm
  • 3D model: QFN-44-EP(8x8) (KiCad packages3D, STEP)
  • 3D model files: pic18lf4520t-i-etched.step / pic18lf4520t-i-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pic18lf4520t-i.step / pic18lf4520t-i.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (383 pp, sha256 7a3ba485a1cab451, retrieved 2026-10-30, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF