main
Ray
Publish 0.1.0
2a91ce2
PIC18F85J10-I
Microchip Tech · Pre-ordered MCUs · TQFP-80(12x12)
PIC18F85J10-I from Microchip Tech, in a TQFP-80(12x12). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RH2/A18 | bidirectional | PORTH bit 2 digital I/O with Schmitt Trigger input that becomes external memory address line A18, which takes priority over port data when the external memory interface is active. |
| 2 | RH3/A19 | bidirectional | PORTH bit 3 digital I/O with Schmitt Trigger input that becomes external memory address line A19, which takes priority over port data when the external memory interface is active. |
| 3 | RE1/AD9/WR/P2C | bidirectional | PORTE bit 1 digital I/O (5.5V tolerant) that also serves as external memory AD9, Parallel Slave Port write control WR input, and ECCP2 PWM output C. |
| 4 | RE0/AD8/RD/P2D | bidirectional | PORTE bit 0 digital I/O (5.5V tolerant) that also serves as external memory AD8, Parallel Slave Port read control RD input, and ECCP2 PWM output D. |
| 5 | RG0/ECCP3/P3A | bidirectional | PORTG bit 0 digital I/O (5.5V tolerant) that also serves as ECCP3 capture input/compare output and ECCP3 PWM output A. |
| 6 | RG1/TX2/CK2 | bidirectional | PORTG bit 1 digital I/O (5.5V tolerant) that also serves as EUSART2 asynchronous transmit TX2 and synchronous clock CK2. |
| 7 | RG2/RX2/DT2 | bidirectional | PORTG bit 2 digital I/O (5.5V tolerant) that also serves as EUSART2 asynchronous receive RX2 and synchronous data DT2. |
| 8 | RG3/CCP4/P3D | bidirectional | PORTG bit 3 digital I/O (5.5V tolerant) that also serves as CCP4 capture/compare/PWM output and ECCP3 PWM output D. |
| 9 | MCLR | input | Active-low Master Clear (Reset) input to the device, with Schmitt Trigger (ST) input buffer. |
| 10 | RG4/CCP5/P1D | bidirectional | PORTG bit 4 digital I/O (5.5V tolerant) that also serves as CCP5 capture/compare/PWM output and ECCP1 PWM output D. |
| 11 | VSS | power_in | Ground reference for logic and I/O pins. |
| 12 | VDDCORE/VCAP | power_in | Core logic power supply input (VDDCORE) when the on-chip regulator is disabled, or external filter capacitor connection (VCAP) when the regulator is enabled. |
| 13 | RF7/SS1 | bidirectional | PORTF bit 7 digital I/O (5.5V tolerant, no analog function) that also serves as MSSP1 SPI slave select input SS1 (TTL). |
| 14 | RF6/AN11 | bidirectional | PORTF bit 6 digital I/O (input tolerance limited to VDD) that also serves as analog input AN11 and comparator C1- input. |
| 15 | RF5/AN10/CVREF | bidirectional | PORTF bit 5 digital I/O (input tolerance limited to VDD) that also serves as analog input AN10 (comparator C1+) and comparator voltage reference output CVREF. |
| 16 | RF4/AN9 | bidirectional | PORTF bit 4 digital I/O (input tolerance limited to VDD) that also serves as analog input AN9 and comparator C2- input. |
| 17 | RF3/AN8 | bidirectional | PORTF bit 3 digital I/O (input tolerance limited to VDD) that also serves as analog input AN8 and comparator C2+ input. |
| 18 | RF2/AN7/C1OUT | bidirectional | PORTF bit 2 digital I/O (input tolerance limited to VDD) that also serves as analog input AN7 and Comparator 1 output C1OUT. |
| 19 | RH7/AN15/P1B | bidirectional | PORTH bit 7 digital I/O (input tolerance limited to VDD) that also serves as analog input AN15 and, when ECCPMX is cleared, ECCP1 PWM output B. |
| 20 | RH6/AN14/P1C | bidirectional | PORTH bit 6 digital I/O (input tolerance limited to VDD) that also serves as analog input AN14 and, when ECCPMX is cleared, ECCP1 PWM output C. |
| 21 | RH5/AN13/P3B | bidirectional | PORTH bit 5 digital I/O (input tolerance limited to VDD) that also serves as analog input AN13 and, when ECCPMX is cleared, ECCP3 PWM output B. |
| 22 | RH4/AN12/P3C | bidirectional | PORTH bit 4 digital I/O (input tolerance limited to VDD) that also serves as analog input AN12 and, when ECCPMX is cleared, ECCP3 PWM output C. |
| 23 | RF1/AN6/C2OUT | bidirectional | PORTF bit 1 digital I/O (input tolerance limited to VDD) that also serves as analog input AN6 and Comparator 2 output C2OUT. |
| 24 | ENVREG | input | Enable for the on-chip voltage regulator (Schmitt Trigger input); it must be tied to VDD to enable the regulator or to ground to disable it. |
| 25 | AVDD | power_in | Positive supply for analog modules. |
| 26 | AVSS | power_in | Ground reference for analog modules. |
| 27 | RA3/AN3/VREF+ | bidirectional | PORTA bit 3 digital I/O (input tolerance limited to VDD) that also serves as analog input AN3 and A/D high reference voltage input VREF+. |
| 28 | RA2/AN2/VREF- | bidirectional | PORTA bit 2 digital I/O (input tolerance limited to VDD) that also serves as analog input AN2 and A/D low reference voltage input VREF-. |
| 29 | RA1/AN1 | bidirectional | PORTA bit 1 digital I/O (input tolerance limited to VDD) that also serves as analog input AN1. |
| 30 | RA0/AN0 | bidirectional | PORTA bit 0 digital I/O (input tolerance limited to VDD) that also serves as analog input AN0. |
| 31 | VSS | power_in | Ground reference for logic and I/O pins. |
| 32 | VDD | power_in | Positive supply for peripheral digital logic and I/O pins. |
| 33 | RA5/AN4 | bidirectional | PORTA bit 5 digital I/O (input tolerance limited to VDD) that also serves as analog input AN4. |
| 34 | RA4/T0CKI | bidirectional | PORTA bit 4 digital I/O with Schmitt Trigger input that also serves as Timer0 external clock input T0CKI. |
| 35 | RC1/T1OSI/ECCP2/P2A | bidirectional | PORTC bit 1 digital I/O (input tolerance limited to VDD) that also serves as Timer1 oscillator input T1OSI and, by default (CCP2MX set), ECCP2 capture/compare and PWM output P2A. |
| 36 | RC0/T1OSO/T13CKI | bidirectional | PORTC bit 0 digital I/O (input tolerance limited to VDD) that also serves as Timer1 oscillator output T1OSO and Timer1/Timer3 external clock input T13CKI. |
| 37 | RC6/TX1/CK1 | bidirectional | PORTC bit 6 digital I/O (5.5V tolerant) that also serves as EUSART1 asynchronous transmit TX1 and synchronous clock CK1. |
| 38 | RC7/RX1/DT1 | bidirectional | PORTC bit 7 digital I/O (5.5V tolerant) that also serves as EUSART1 asynchronous receive RX1 and synchronous data DT1. |
| 39 | RJ4/BA0 | bidirectional | PORTJ bit 4 digital I/O (5.5V tolerant) that becomes external memory byte address 0 control output BA0 when the external memory interface is enabled. |
| 40 | RJ5/CE | bidirectional | PORTJ bit 5 digital I/O (5.5V tolerant) that becomes external memory chip enable control output CE when the external memory interface is enabled. |
| 41 | RJ6/LB | bidirectional | PORTJ bit 6 digital I/O (5.5V tolerant) that becomes external memory lower byte enable control output LB when the external memory interface is enabled. |
| 42 | RJ7/UB | bidirectional | PORTJ bit 7 digital I/O (5.5V tolerant) that becomes external memory upper byte enable control output UB when the external memory interface is enabled. |
| 43 | RC2/ECCP1/P1A | bidirectional | PORTC bit 2 digital I/O (5.5V tolerant) that also serves as ECCP1 capture/compare input/output and ECCP1 PWM output P1A. |
| 44 | RC3/SCK1/SCL1 | bidirectional | PORTC bit 3 digital I/O (5.5V tolerant) that also serves as MSSP1 SPI clock SCK1 and I2C clock SCL1. |
| 45 | RC4/SDI1/SDA1 | bidirectional | PORTC bit 4 digital I/O (5.5V tolerant) that also serves as MSSP1 SPI data input SDI1 and I2C data SDA1. |
| 46 | RC5/SDO1 | bidirectional | PORTC bit 5 digital I/O (5.5V tolerant) that also serves as MSSP1 SPI data output SDO1. |
| 47 | RB7/KBI3/PGD | bidirectional | PORTB bit 7 digital I/O (5.5V tolerant, weak pull-up when RBPU is cleared) that also serves as interrupt-on-change input KBI3 and ICSP/ICD data PGD. |
| 48 | VDD | power_in | Positive supply for peripheral digital logic and I/O pins. |
| 49 | OSC1/CLKI | input | Oscillator crystal or external clock source input, with ST buffer when configured in RC mode and CMOS buffer otherwise. |
| 50 | OSC2/CLKO | output | Oscillator crystal output connecting to a crystal or resonator in Crystal Oscillator mode; in RC mode it outputs CLKO at 1/4 the OSC1 frequency. |
| 51 | VSS | power_in | Ground reference for logic and I/O pins. |
| 52 | RB6/KBI2/PGC | bidirectional | PORTB bit 6 digital I/O (5.5V tolerant, weak pull-up when RBPU is cleared) that also serves as interrupt-on-change input KBI2 and ICSP/ICD programming clock PGC. |
| 53 | RB5/KBI1 | bidirectional | PORTB bit 5 digital I/O (5.5V tolerant, weak pull-up when RBPU is cleared) that also serves as interrupt-on-change input KBI1. |
| 54 | RB4/KBI0 | bidirectional | PORTB bit 4 digital I/O (5.5V tolerant, weak pull-up when RBPU is cleared) that also serves as interrupt-on-change input KBI0. |
| 55 | RB3/INT3/ECCP2/P2A | bidirectional | PORTB bit 3 digital I/O (5.5V tolerant, weak pull-up when RBPU is cleared) that also serves as external interrupt INT3 and, when CCP2MX is cleared in Extended Microcontroller mode, ECCP2 capture/compare and PWM output P2A. |
| 56 | RB2/INT2 | bidirectional | PORTB bit 2 digital I/O (5.5V tolerant, weak pull-up when RBPU is cleared) that also serves as external interrupt INT2. |
| 57 | RB1/INT1 | bidirectional | PORTB bit 1 digital I/O (5.5V tolerant, weak pull-up when RBPU is cleared) that also serves as external interrupt INT1. |
| 58 | RB0/INT0/FLT0 | bidirectional | PORTB bit 0 digital I/O (5.5V tolerant, weak pull-up when RBPU is cleared) that also serves as external interrupt INT0 and ECCP1/2/3 Enhanced PWM Fault input FLT0. |
| 59 | RJ3/WRH | bidirectional | PORTJ bit 3 digital I/O (5.5V tolerant) that becomes external memory write high byte control output WRH when the external memory interface is enabled. |
| 60 | RJ2/WRL | bidirectional | PORTJ bit 2 digital I/O (5.5V tolerant) that becomes external memory write low byte control output WRL when the external memory interface is enabled. |
| 61 | RJ1/OE | bidirectional | PORTJ bit 1 digital I/O (5.5V tolerant) that becomes external memory output enable control output OE when the external memory interface is enabled. |
| 62 | RJ0/ALE | bidirectional | PORTJ bit 0 digital I/O (5.5V tolerant) that becomes external memory address latch enable control output ALE when the external memory interface is enabled. |
| 63 | RD7/AD7/PSP7/SS2 | bidirectional | PORTD bit 7 digital I/O (5.5V tolerant) that also serves as external memory address/data bit 7, Parallel Slave Port data, and MSSP2 SPI slave select input SS2. |
| 64 | RD6/AD6/PSP6/SCK2/SCL2 | bidirectional | PORTD bit 6 digital I/O (5.5V tolerant) that also serves as external memory address/data bit 6, Parallel Slave Port data, and MSSP2 SPI clock SCK2 and I2C clock SCL2. |
| 65 | RD5/AD5/PSP5/SDI2/SDA2 | bidirectional | PORTD bit 5 digital I/O (5.5V tolerant) that also serves as external memory address/data bit 5, Parallel Slave Port data, MSSP2 SPI data input SDI2 and I2C data SDA2. |
| 66 | RD4/AD4/PSP4/SDO2 | bidirectional | PORTD bit 4 digital I/O (5.5V tolerant) that also serves as external memory address/data bit 4, Parallel Slave Port data, and MSSP2 SPI data output SDO2. |
| 67 | RD3/AD3/PSP3 | bidirectional | PORTD bit 3 digital I/O (5.5V tolerant) that also serves as external memory address/data bit 3 and Parallel Slave Port data. |
| 68 | RD2/AD2/PSP2 | bidirectional | PORTD bit 2 digital I/O (5.5V tolerant) that also serves as external memory address/data bit 2 and Parallel Slave Port data. |
| 69 | RD1/AD1/PSP1 | bidirectional | PORTD bit 1 digital I/O (5.5V tolerant) that also serves as external memory address/data bit 1 and Parallel Slave Port data. |
| 70 | VSS | power_in | Ground reference for logic and I/O pins. |
| 71 | VDD | power_in | Positive supply for peripheral digital logic and I/O pins. |
| 72 | RD0/AD0/PSP0 | bidirectional | PORTD bit 0 digital I/O (5.5V tolerant) that also serves as external memory address/data bit 0 and Parallel Slave Port data. |
| 73 | RE7/AD15/ECCP2/P2A | bidirectional | PORTE bit 7 digital I/O (5.5V tolerant) that also serves as external memory address/data bit 15 and, when CCP2MX is cleared in Microcontroller mode, ECCP2 capture/compare and PWM output P2A. |
| 74 | RE6/AD14/P1B | bidirectional | PORTE bit 6 digital I/O (5.5V tolerant) that also serves as external memory address/data bit 14 and default ECCP1 PWM output P1B (when ECCPMX is set). |
| 75 | RE5/AD13/P1C | bidirectional | PORTE bit 5 digital I/O (5.5V tolerant) that also serves as external memory address/data bit 13 and default ECCP1 PWM output P1C (when ECCPMX is set). |
| 76 | RE4/AD12/P3B | bidirectional | PORTE bit 4 digital I/O (5.5V tolerant) that also serves as external memory address/data bit 12 and default ECCP3 PWM output P3B (when ECCPMX is set). |
| 77 | RE3/AD11/P3C | bidirectional | PORTE bit 3 digital I/O (5.5V tolerant) that also serves as external memory address/data bit 11 and default ECCP3 PWM output P3C (when ECCPMX is set). |
| 78 | RE2/AD10/CS/P2B | bidirectional | PORTE bit 2 digital I/O (5.5V tolerant) that also serves as external memory address/data bit 10, Parallel Slave Port chip select input CS, and ECCP2 PWM output B. |
| 79 | RH0/A16 | bidirectional | PORTH bit 0 digital I/O (5.5V tolerant) that becomes external memory address line A16, which takes priority over port data when the external memory interface is active. |
| 80 | RH1/A17 | bidirectional | PORTH bit 1 digital I/O (5.5V tolerant) that becomes external memory address line A17, which takes priority over port data when the external memory interface is active. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | TQFP-80(12x12) |
| Category | Embedded Processors & Controllers |
| Pins | 80 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating voltage range | 2 | 3.6 | V | Operating Voltage Range, PIC18F87J10 family features list | 3 | ||
| Operating frequency | 40 | MHz | Printed as 'DC, 40 MHz' for PIC18F85J10 in 80-pin device feature table (lower bound printed as DC, no numeric min) | 9 | |||
| High-current sink/source current, PORTB and PORTC | 25 | mA | Printed as 25 mA sink / 25 mA source (PORTB and PORTC only) | 3 |
CAD (KiCad official)
- Symbol:
PIC18F85J10-I - Footprint:
Package_QFP:TQFP-80_12x12mm_P0.5mm - 3D model: TQFP-80(12x12) (KiCad packages3D, STEP)
- 3D model files:
pic18f85j10-i-etched.step/pic18f85j10-i-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic18f85j10-i.step/pic18f85j10-i.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (410 pp, sha256
eade6a1496f93bf6, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# PIC18F85J10-I
**Microchip Tech** · Pre-ordered MCUs · TQFP-80(12x12)
PIC18F85J10-I from Microchip Tech, in a TQFP-80(12x12). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RH2/A18 | bidirectional | PORTH bit 2 digital I/O with Schmitt Trigger input that becomes external memory address line A18, which takes priority over port data when the external memory interface is active. |
| 2 | RH3/A19 | bidirectional | PORTH bit 3 digital I/O with Schmitt Trigger input that becomes external memory address line A19, which takes priority over port data when the external memory interface is active. |
| 3 | RE1/AD9/WR/P2C | bidirectional | PORTE bit 1 digital I/O (5.5V tolerant) that also serves as external memory AD9, Parallel Slave Port write control WR input, and ECCP2 PWM output C. |
| 4 | RE0/AD8/RD/P2D | bidirectional | PORTE bit 0 digital I/O (5.5V tolerant) that also serves as external memory AD8, Parallel Slave Port read control RD input, and ECCP2 PWM output D. |
| 5 | RG0/ECCP3/P3A | bidirectional | PORTG bit 0 digital I/O (5.5V tolerant) that also serves as ECCP3 capture input/compare output and ECCP3 PWM output A. |
| 6 | RG1/TX2/CK2 | bidirectional | PORTG bit 1 digital I/O (5.5V tolerant) that also serves as EUSART2 asynchronous transmit TX2 and synchronous clock CK2. |
| 7 | RG2/RX2/DT2 | bidirectional | PORTG bit 2 digital I/O (5.5V tolerant) that also serves as EUSART2 asynchronous receive RX2 and synchronous data DT2. |
| 8 | RG3/CCP4/P3D | bidirectional | PORTG bit 3 digital I/O (5.5V tolerant) that also serves as CCP4 capture/compare/PWM output and ECCP3 PWM output D. |
| 9 | MCLR | input | Active-low Master Clear (Reset) input to the device, with Schmitt Trigger (ST) input buffer. |
| 10 | RG4/CCP5/P1D | bidirectional | PORTG bit 4 digital I/O (5.5V tolerant) that also serves as CCP5 capture/compare/PWM output and ECCP1 PWM output D. |
| 11 | VSS | power_in | Ground reference for logic and I/O pins. |
| 12 | VDDCORE/VCAP | power_in | Core logic power supply input (VDDCORE) when the on-chip regulator is disabled, or external filter capacitor connection (VCAP) when the regulator is enabled. |
| 13 | RF7/SS1 | bidirectional | PORTF bit 7 digital I/O (5.5V tolerant, no analog function) that also serves as MSSP1 SPI slave select input SS1 (TTL). |
| 14 | RF6/AN11 | bidirectional | PORTF bit 6 digital I/O (input tolerance limited to VDD) that also serves as analog input AN11 and comparator C1- input. |
| 15 | RF5/AN10/CVREF | bidirectional | PORTF bit 5 digital I/O (input tolerance limited to VDD) that also serves as analog input AN10 (comparator C1+) and comparator voltage reference output CVREF. |
| 16 | RF4/AN9 | bidirectional | PORTF bit 4 digital I/O (input tolerance limited to VDD) that also serves as analog input AN9 and comparator C2- input. |
| 17 | RF3/AN8 | bidirectional | PORTF bit 3 digital I/O (input tolerance limited to VDD) that also serves as analog input AN8 and comparator C2+ input. |
| 18 | RF2/AN7/C1OUT | bidirectional | PORTF bit 2 digital I/O (input tolerance limited to VDD) that also serves as analog input AN7 and Comparator 1 output C1OUT. |
| 19 | RH7/AN15/P1B | bidirectional | PORTH bit 7 digital I/O (input tolerance limited to VDD) that also serves as analog input AN15 and, when ECCPMX is cleared, ECCP1 PWM output B. |
| 20 | RH6/AN14/P1C | bidirectional | PORTH bit 6 digital I/O (input tolerance limited to VDD) that also serves as analog input AN14 and, when ECCPMX is cleared, ECCP1 PWM output C. |
| 21 | RH5/AN13/P3B | bidirectional | PORTH bit 5 digital I/O (input tolerance limited to VDD) that also serves as analog input AN13 and, when ECCPMX is cleared, ECCP3 PWM output B. |
| 22 | RH4/AN12/P3C | bidirectional | PORTH bit 4 digital I/O (input tolerance limited to VDD) that also serves as analog input AN12 and, when ECCPMX is cleared, ECCP3 PWM output C. |
| 23 | RF1/AN6/C2OUT | bidirectional | PORTF bit 1 digital I/O (input tolerance limited to VDD) that also serves as analog input AN6 and Comparator 2 output C2OUT. |
| 24 | ENVREG | input | Enable for the on-chip voltage regulator (Schmitt Trigger input); it must be tied to VDD to enable the regulator or to ground to disable it. |
| 25 | AVDD | power_in | Positive supply for analog modules. |
| 26 | AVSS | power_in | Ground reference for analog modules. |
| 27 | RA3/AN3/VREF+ | bidirectional | PORTA bit 3 digital I/O (input tolerance limited to VDD) that also serves as analog input AN3 and A/D high reference voltage input VREF+. |
| 28 | RA2/AN2/VREF- | bidirectional | PORTA bit 2 digital I/O (input tolerance limited to VDD) that also serves as analog input AN2 and A/D low reference voltage input VREF-. |
| 29 | RA1/AN1 | bidirectional | PORTA bit 1 digital I/O (input tolerance limited to VDD) that also serves as analog input AN1. |
| 30 | RA0/AN0 | bidirectional | PORTA bit 0 digital I/O (input tolerance limited to VDD) that also serves as analog input AN0. |
| 31 | VSS | power_in | Ground reference for logic and I/O pins. |
| 32 | VDD | power_in | Positive supply for peripheral digital logic and I/O pins. |
| 33 | RA5/AN4 | bidirectional | PORTA bit 5 digital I/O (input tolerance limited to VDD) that also serves as analog input AN4. |
| 34 | RA4/T0CKI | bidirectional | PORTA bit 4 digital I/O with Schmitt Trigger input that also serves as Timer0 external clock input T0CKI. |
| 35 | RC1/T1OSI/ECCP2/P2A | bidirectional | PORTC bit 1 digital I/O (input tolerance limited to VDD) that also serves as Timer1 oscillator input T1OSI and, by default (CCP2MX set), ECCP2 capture/compare and PWM output P2A. |
| 36 | RC0/T1OSO/T13CKI | bidirectional | PORTC bit 0 digital I/O (input tolerance limited to VDD) that also serves as Timer1 oscillator output T1OSO and Timer1/Timer3 external clock input T13CKI. |
| 37 | RC6/TX1/CK1 | bidirectional | PORTC bit 6 digital I/O (5.5V tolerant) that also serves as EUSART1 asynchronous transmit TX1 and synchronous clock CK1. |
| 38 | RC7/RX1/DT1 | bidirectional | PORTC bit 7 digital I/O (5.5V tolerant) that also serves as EUSART1 asynchronous receive RX1 and synchronous data DT1. |
| 39 | RJ4/BA0 | bidirectional | PORTJ bit 4 digital I/O (5.5V tolerant) that becomes external memory byte address 0 control output BA0 when the external memory interface is enabled. |
| 40 | RJ5/CE | bidirectional | PORTJ bit 5 digital I/O (5.5V tolerant) that becomes external memory chip enable control output CE when the external memory interface is enabled. |
| 41 | RJ6/LB | bidirectional | PORTJ bit 6 digital I/O (5.5V tolerant) that becomes external memory lower byte enable control output LB when the external memory interface is enabled. |
| 42 | RJ7/UB | bidirectional | PORTJ bit 7 digital I/O (5.5V tolerant) that becomes external memory upper byte enable control output UB when the external memory interface is enabled. |
| 43 | RC2/ECCP1/P1A | bidirectional | PORTC bit 2 digital I/O (5.5V tolerant) that also serves as ECCP1 capture/compare input/output and ECCP1 PWM output P1A. |
| 44 | RC3/SCK1/SCL1 | bidirectional | PORTC bit 3 digital I/O (5.5V tolerant) that also serves as MSSP1 SPI clock SCK1 and I2C clock SCL1. |
| 45 | RC4/SDI1/SDA1 | bidirectional | PORTC bit 4 digital I/O (5.5V tolerant) that also serves as MSSP1 SPI data input SDI1 and I2C data SDA1. |
| 46 | RC5/SDO1 | bidirectional | PORTC bit 5 digital I/O (5.5V tolerant) that also serves as MSSP1 SPI data output SDO1. |
| 47 | RB7/KBI3/PGD | bidirectional | PORTB bit 7 digital I/O (5.5V tolerant, weak pull-up when RBPU is cleared) that also serves as interrupt-on-change input KBI3 and ICSP/ICD data PGD. |
| 48 | VDD | power_in | Positive supply for peripheral digital logic and I/O pins. |
| 49 | OSC1/CLKI | input | Oscillator crystal or external clock source input, with ST buffer when configured in RC mode and CMOS buffer otherwise. |
| 50 | OSC2/CLKO | output | Oscillator crystal output connecting to a crystal or resonator in Crystal Oscillator mode; in RC mode it outputs CLKO at 1/4 the OSC1 frequency. |
| 51 | VSS | power_in | Ground reference for logic and I/O pins. |
| 52 | RB6/KBI2/PGC | bidirectional | PORTB bit 6 digital I/O (5.5V tolerant, weak pull-up when RBPU is cleared) that also serves as interrupt-on-change input KBI2 and ICSP/ICD programming clock PGC. |
| 53 | RB5/KBI1 | bidirectional | PORTB bit 5 digital I/O (5.5V tolerant, weak pull-up when RBPU is cleared) that also serves as interrupt-on-change input KBI1. |
| 54 | RB4/KBI0 | bidirectional | PORTB bit 4 digital I/O (5.5V tolerant, weak pull-up when RBPU is cleared) that also serves as interrupt-on-change input KBI0. |
| 55 | RB3/INT3/ECCP2/P2A | bidirectional | PORTB bit 3 digital I/O (5.5V tolerant, weak pull-up when RBPU is cleared) that also serves as external interrupt INT3 and, when CCP2MX is cleared in Extended Microcontroller mode, ECCP2 capture/compare and PWM output P2A. |
| 56 | RB2/INT2 | bidirectional | PORTB bit 2 digital I/O (5.5V tolerant, weak pull-up when RBPU is cleared) that also serves as external interrupt INT2. |
| 57 | RB1/INT1 | bidirectional | PORTB bit 1 digital I/O (5.5V tolerant, weak pull-up when RBPU is cleared) that also serves as external interrupt INT1. |
| 58 | RB0/INT0/FLT0 | bidirectional | PORTB bit 0 digital I/O (5.5V tolerant, weak pull-up when RBPU is cleared) that also serves as external interrupt INT0 and ECCP1/2/3 Enhanced PWM Fault input FLT0. |
| 59 | RJ3/WRH | bidirectional | PORTJ bit 3 digital I/O (5.5V tolerant) that becomes external memory write high byte control output WRH when the external memory interface is enabled. |
| 60 | RJ2/WRL | bidirectional | PORTJ bit 2 digital I/O (5.5V tolerant) that becomes external memory write low byte control output WRL when the external memory interface is enabled. |
| 61 | RJ1/OE | bidirectional | PORTJ bit 1 digital I/O (5.5V tolerant) that becomes external memory output enable control output OE when the external memory interface is enabled. |
| 62 | RJ0/ALE | bidirectional | PORTJ bit 0 digital I/O (5.5V tolerant) that becomes external memory address latch enable control output ALE when the external memory interface is enabled. |
| 63 | RD7/AD7/PSP7/SS2 | bidirectional | PORTD bit 7 digital I/O (5.5V tolerant) that also serves as external memory address/data bit 7, Parallel Slave Port data, and MSSP2 SPI slave select input SS2. |
| 64 | RD6/AD6/PSP6/SCK2/SCL2 | bidirectional | PORTD bit 6 digital I/O (5.5V tolerant) that also serves as external memory address/data bit 6, Parallel Slave Port data, and MSSP2 SPI clock SCK2 and I2C clock SCL2. |
| 65 | RD5/AD5/PSP5/SDI2/SDA2 | bidirectional | PORTD bit 5 digital I/O (5.5V tolerant) that also serves as external memory address/data bit 5, Parallel Slave Port data, MSSP2 SPI data input SDI2 and I2C data SDA2. |
| 66 | RD4/AD4/PSP4/SDO2 | bidirectional | PORTD bit 4 digital I/O (5.5V tolerant) that also serves as external memory address/data bit 4, Parallel Slave Port data, and MSSP2 SPI data output SDO2. |
| 67 | RD3/AD3/PSP3 | bidirectional | PORTD bit 3 digital I/O (5.5V tolerant) that also serves as external memory address/data bit 3 and Parallel Slave Port data. |
| 68 | RD2/AD2/PSP2 | bidirectional | PORTD bit 2 digital I/O (5.5V tolerant) that also serves as external memory address/data bit 2 and Parallel Slave Port data. |
| 69 | RD1/AD1/PSP1 | bidirectional | PORTD bit 1 digital I/O (5.5V tolerant) that also serves as external memory address/data bit 1 and Parallel Slave Port data. |
| 70 | VSS | power_in | Ground reference for logic and I/O pins. |
| 71 | VDD | power_in | Positive supply for peripheral digital logic and I/O pins. |
| 72 | RD0/AD0/PSP0 | bidirectional | PORTD bit 0 digital I/O (5.5V tolerant) that also serves as external memory address/data bit 0 and Parallel Slave Port data. |
| 73 | RE7/AD15/ECCP2/P2A | bidirectional | PORTE bit 7 digital I/O (5.5V tolerant) that also serves as external memory address/data bit 15 and, when CCP2MX is cleared in Microcontroller mode, ECCP2 capture/compare and PWM output P2A. |
| 74 | RE6/AD14/P1B | bidirectional | PORTE bit 6 digital I/O (5.5V tolerant) that also serves as external memory address/data bit 14 and default ECCP1 PWM output P1B (when ECCPMX is set). |
| 75 | RE5/AD13/P1C | bidirectional | PORTE bit 5 digital I/O (5.5V tolerant) that also serves as external memory address/data bit 13 and default ECCP1 PWM output P1C (when ECCPMX is set). |
| 76 | RE4/AD12/P3B | bidirectional | PORTE bit 4 digital I/O (5.5V tolerant) that also serves as external memory address/data bit 12 and default ECCP3 PWM output P3B (when ECCPMX is set). |
| 77 | RE3/AD11/P3C | bidirectional | PORTE bit 3 digital I/O (5.5V tolerant) that also serves as external memory address/data bit 11 and default ECCP3 PWM output P3C (when ECCPMX is set). |
| 78 | RE2/AD10/CS/P2B | bidirectional | PORTE bit 2 digital I/O (5.5V tolerant) that also serves as external memory address/data bit 10, Parallel Slave Port chip select input CS, and ECCP2 PWM output B. |
| 79 | RH0/A16 | bidirectional | PORTH bit 0 digital I/O (5.5V tolerant) that becomes external memory address line A16, which takes priority over port data when the external memory interface is active. |
| 80 | RH1/A17 | bidirectional | PORTH bit 1 digital I/O (5.5V tolerant) that becomes external memory address line A17, which takes priority over port data when the external memory interface is active. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | TQFP-80(12x12) |
| Category | Embedded Processors & Controllers |
| Pins | 80 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating voltage range | | 2 | | 3.6 | V | Operating Voltage Range, PIC18F87J10 family features list | 3 |
| Operating frequency | | | | 40 | MHz | Printed as 'DC, 40 MHz' for PIC18F85J10 in 80-pin device feature table (lower bound printed as DC, no numeric min) | 9 |
| High-current sink/source current, PORTB and PORTC | | | | 25 | mA | Printed as 25 mA sink / 25 mA source (PORTB and PORTC only) | 3 |
## CAD (KiCad official)
- Symbol: `PIC18F85J10-I`
- Footprint: `Package_QFP:TQFP-80_12x12mm_P0.5mm`
- 3D model: TQFP-80(12x12) (KiCad packages3D, STEP)
- 3D model files: `pic18f85j10-i-etched.step` / `pic18f85j10-i-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `pic18f85j10-i.step` / `pic18f85j10-i.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Microchip Tech datasheet](https://ww1.microchip.com/downloads/en/DeviceDoc/39663f.pdf) (410 pp, sha256 `eade6a1496f93bf6`, retrieved 2026-10-30, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/pic18f85j10-i-datasheet.pdf)