Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

PIC18F85J10-I

Microchip Tech · Pre-ordered MCUs · TQFP-80(12x12)

PIC18F85J10-I from Microchip Tech, in a TQFP-80(12x12). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 RH2/A18 bidirectional PORTH bit 2 digital I/O with Schmitt Trigger input that becomes external memory address line A18, which takes priority over port data when the external memory interface is active.
2 RH3/A19 bidirectional PORTH bit 3 digital I/O with Schmitt Trigger input that becomes external memory address line A19, which takes priority over port data when the external memory interface is active.
3 RE1/AD9/WR/P2C bidirectional PORTE bit 1 digital I/O (5.5V tolerant) that also serves as external memory AD9, Parallel Slave Port write control WR input, and ECCP2 PWM output C.
4 RE0/AD8/RD/P2D bidirectional PORTE bit 0 digital I/O (5.5V tolerant) that also serves as external memory AD8, Parallel Slave Port read control RD input, and ECCP2 PWM output D.
5 RG0/ECCP3/P3A bidirectional PORTG bit 0 digital I/O (5.5V tolerant) that also serves as ECCP3 capture input/compare output and ECCP3 PWM output A.
6 RG1/TX2/CK2 bidirectional PORTG bit 1 digital I/O (5.5V tolerant) that also serves as EUSART2 asynchronous transmit TX2 and synchronous clock CK2.
7 RG2/RX2/DT2 bidirectional PORTG bit 2 digital I/O (5.5V tolerant) that also serves as EUSART2 asynchronous receive RX2 and synchronous data DT2.
8 RG3/CCP4/P3D bidirectional PORTG bit 3 digital I/O (5.5V tolerant) that also serves as CCP4 capture/compare/PWM output and ECCP3 PWM output D.
9 MCLR input Active-low Master Clear (Reset) input to the device, with Schmitt Trigger (ST) input buffer.
10 RG4/CCP5/P1D bidirectional PORTG bit 4 digital I/O (5.5V tolerant) that also serves as CCP5 capture/compare/PWM output and ECCP1 PWM output D.
11 VSS power_in Ground reference for logic and I/O pins.
12 VDDCORE/VCAP power_in Core logic power supply input (VDDCORE) when the on-chip regulator is disabled, or external filter capacitor connection (VCAP) when the regulator is enabled.
13 RF7/SS1 bidirectional PORTF bit 7 digital I/O (5.5V tolerant, no analog function) that also serves as MSSP1 SPI slave select input SS1 (TTL).
14 RF6/AN11 bidirectional PORTF bit 6 digital I/O (input tolerance limited to VDD) that also serves as analog input AN11 and comparator C1- input.
15 RF5/AN10/CVREF bidirectional PORTF bit 5 digital I/O (input tolerance limited to VDD) that also serves as analog input AN10 (comparator C1+) and comparator voltage reference output CVREF.
16 RF4/AN9 bidirectional PORTF bit 4 digital I/O (input tolerance limited to VDD) that also serves as analog input AN9 and comparator C2- input.
17 RF3/AN8 bidirectional PORTF bit 3 digital I/O (input tolerance limited to VDD) that also serves as analog input AN8 and comparator C2+ input.
18 RF2/AN7/C1OUT bidirectional PORTF bit 2 digital I/O (input tolerance limited to VDD) that also serves as analog input AN7 and Comparator 1 output C1OUT.
19 RH7/AN15/P1B bidirectional PORTH bit 7 digital I/O (input tolerance limited to VDD) that also serves as analog input AN15 and, when ECCPMX is cleared, ECCP1 PWM output B.
20 RH6/AN14/P1C bidirectional PORTH bit 6 digital I/O (input tolerance limited to VDD) that also serves as analog input AN14 and, when ECCPMX is cleared, ECCP1 PWM output C.
21 RH5/AN13/P3B bidirectional PORTH bit 5 digital I/O (input tolerance limited to VDD) that also serves as analog input AN13 and, when ECCPMX is cleared, ECCP3 PWM output B.
22 RH4/AN12/P3C bidirectional PORTH bit 4 digital I/O (input tolerance limited to VDD) that also serves as analog input AN12 and, when ECCPMX is cleared, ECCP3 PWM output C.
23 RF1/AN6/C2OUT bidirectional PORTF bit 1 digital I/O (input tolerance limited to VDD) that also serves as analog input AN6 and Comparator 2 output C2OUT.
24 ENVREG input Enable for the on-chip voltage regulator (Schmitt Trigger input); it must be tied to VDD to enable the regulator or to ground to disable it.
25 AVDD power_in Positive supply for analog modules.
26 AVSS power_in Ground reference for analog modules.
27 RA3/AN3/VREF+ bidirectional PORTA bit 3 digital I/O (input tolerance limited to VDD) that also serves as analog input AN3 and A/D high reference voltage input VREF+.
28 RA2/AN2/VREF- bidirectional PORTA bit 2 digital I/O (input tolerance limited to VDD) that also serves as analog input AN2 and A/D low reference voltage input VREF-.
29 RA1/AN1 bidirectional PORTA bit 1 digital I/O (input tolerance limited to VDD) that also serves as analog input AN1.
30 RA0/AN0 bidirectional PORTA bit 0 digital I/O (input tolerance limited to VDD) that also serves as analog input AN0.
31 VSS power_in Ground reference for logic and I/O pins.
32 VDD power_in Positive supply for peripheral digital logic and I/O pins.
33 RA5/AN4 bidirectional PORTA bit 5 digital I/O (input tolerance limited to VDD) that also serves as analog input AN4.
34 RA4/T0CKI bidirectional PORTA bit 4 digital I/O with Schmitt Trigger input that also serves as Timer0 external clock input T0CKI.
35 RC1/T1OSI/ECCP2/P2A bidirectional PORTC bit 1 digital I/O (input tolerance limited to VDD) that also serves as Timer1 oscillator input T1OSI and, by default (CCP2MX set), ECCP2 capture/compare and PWM output P2A.
36 RC0/T1OSO/T13CKI bidirectional PORTC bit 0 digital I/O (input tolerance limited to VDD) that also serves as Timer1 oscillator output T1OSO and Timer1/Timer3 external clock input T13CKI.
37 RC6/TX1/CK1 bidirectional PORTC bit 6 digital I/O (5.5V tolerant) that also serves as EUSART1 asynchronous transmit TX1 and synchronous clock CK1.
38 RC7/RX1/DT1 bidirectional PORTC bit 7 digital I/O (5.5V tolerant) that also serves as EUSART1 asynchronous receive RX1 and synchronous data DT1.
39 RJ4/BA0 bidirectional PORTJ bit 4 digital I/O (5.5V tolerant) that becomes external memory byte address 0 control output BA0 when the external memory interface is enabled.
40 RJ5/CE bidirectional PORTJ bit 5 digital I/O (5.5V tolerant) that becomes external memory chip enable control output CE when the external memory interface is enabled.
41 RJ6/LB bidirectional PORTJ bit 6 digital I/O (5.5V tolerant) that becomes external memory lower byte enable control output LB when the external memory interface is enabled.
42 RJ7/UB bidirectional PORTJ bit 7 digital I/O (5.5V tolerant) that becomes external memory upper byte enable control output UB when the external memory interface is enabled.
43 RC2/ECCP1/P1A bidirectional PORTC bit 2 digital I/O (5.5V tolerant) that also serves as ECCP1 capture/compare input/output and ECCP1 PWM output P1A.
44 RC3/SCK1/SCL1 bidirectional PORTC bit 3 digital I/O (5.5V tolerant) that also serves as MSSP1 SPI clock SCK1 and I2C clock SCL1.
45 RC4/SDI1/SDA1 bidirectional PORTC bit 4 digital I/O (5.5V tolerant) that also serves as MSSP1 SPI data input SDI1 and I2C data SDA1.
46 RC5/SDO1 bidirectional PORTC bit 5 digital I/O (5.5V tolerant) that also serves as MSSP1 SPI data output SDO1.
47 RB7/KBI3/PGD bidirectional PORTB bit 7 digital I/O (5.5V tolerant, weak pull-up when RBPU is cleared) that also serves as interrupt-on-change input KBI3 and ICSP/ICD data PGD.
48 VDD power_in Positive supply for peripheral digital logic and I/O pins.
49 OSC1/CLKI input Oscillator crystal or external clock source input, with ST buffer when configured in RC mode and CMOS buffer otherwise.
50 OSC2/CLKO output Oscillator crystal output connecting to a crystal or resonator in Crystal Oscillator mode; in RC mode it outputs CLKO at 1/4 the OSC1 frequency.
51 VSS power_in Ground reference for logic and I/O pins.
52 RB6/KBI2/PGC bidirectional PORTB bit 6 digital I/O (5.5V tolerant, weak pull-up when RBPU is cleared) that also serves as interrupt-on-change input KBI2 and ICSP/ICD programming clock PGC.
53 RB5/KBI1 bidirectional PORTB bit 5 digital I/O (5.5V tolerant, weak pull-up when RBPU is cleared) that also serves as interrupt-on-change input KBI1.
54 RB4/KBI0 bidirectional PORTB bit 4 digital I/O (5.5V tolerant, weak pull-up when RBPU is cleared) that also serves as interrupt-on-change input KBI0.
55 RB3/INT3/ECCP2/P2A bidirectional PORTB bit 3 digital I/O (5.5V tolerant, weak pull-up when RBPU is cleared) that also serves as external interrupt INT3 and, when CCP2MX is cleared in Extended Microcontroller mode, ECCP2 capture/compare and PWM output P2A.
56 RB2/INT2 bidirectional PORTB bit 2 digital I/O (5.5V tolerant, weak pull-up when RBPU is cleared) that also serves as external interrupt INT2.
57 RB1/INT1 bidirectional PORTB bit 1 digital I/O (5.5V tolerant, weak pull-up when RBPU is cleared) that also serves as external interrupt INT1.
58 RB0/INT0/FLT0 bidirectional PORTB bit 0 digital I/O (5.5V tolerant, weak pull-up when RBPU is cleared) that also serves as external interrupt INT0 and ECCP1/2/3 Enhanced PWM Fault input FLT0.
59 RJ3/WRH bidirectional PORTJ bit 3 digital I/O (5.5V tolerant) that becomes external memory write high byte control output WRH when the external memory interface is enabled.
60 RJ2/WRL bidirectional PORTJ bit 2 digital I/O (5.5V tolerant) that becomes external memory write low byte control output WRL when the external memory interface is enabled.
61 RJ1/OE bidirectional PORTJ bit 1 digital I/O (5.5V tolerant) that becomes external memory output enable control output OE when the external memory interface is enabled.
62 RJ0/ALE bidirectional PORTJ bit 0 digital I/O (5.5V tolerant) that becomes external memory address latch enable control output ALE when the external memory interface is enabled.
63 RD7/AD7/PSP7/SS2 bidirectional PORTD bit 7 digital I/O (5.5V tolerant) that also serves as external memory address/data bit 7, Parallel Slave Port data, and MSSP2 SPI slave select input SS2.
64 RD6/AD6/PSP6/SCK2/SCL2 bidirectional PORTD bit 6 digital I/O (5.5V tolerant) that also serves as external memory address/data bit 6, Parallel Slave Port data, and MSSP2 SPI clock SCK2 and I2C clock SCL2.
65 RD5/AD5/PSP5/SDI2/SDA2 bidirectional PORTD bit 5 digital I/O (5.5V tolerant) that also serves as external memory address/data bit 5, Parallel Slave Port data, MSSP2 SPI data input SDI2 and I2C data SDA2.
66 RD4/AD4/PSP4/SDO2 bidirectional PORTD bit 4 digital I/O (5.5V tolerant) that also serves as external memory address/data bit 4, Parallel Slave Port data, and MSSP2 SPI data output SDO2.
67 RD3/AD3/PSP3 bidirectional PORTD bit 3 digital I/O (5.5V tolerant) that also serves as external memory address/data bit 3 and Parallel Slave Port data.
68 RD2/AD2/PSP2 bidirectional PORTD bit 2 digital I/O (5.5V tolerant) that also serves as external memory address/data bit 2 and Parallel Slave Port data.
69 RD1/AD1/PSP1 bidirectional PORTD bit 1 digital I/O (5.5V tolerant) that also serves as external memory address/data bit 1 and Parallel Slave Port data.
70 VSS power_in Ground reference for logic and I/O pins.
71 VDD power_in Positive supply for peripheral digital logic and I/O pins.
72 RD0/AD0/PSP0 bidirectional PORTD bit 0 digital I/O (5.5V tolerant) that also serves as external memory address/data bit 0 and Parallel Slave Port data.
73 RE7/AD15/ECCP2/P2A bidirectional PORTE bit 7 digital I/O (5.5V tolerant) that also serves as external memory address/data bit 15 and, when CCP2MX is cleared in Microcontroller mode, ECCP2 capture/compare and PWM output P2A.
74 RE6/AD14/P1B bidirectional PORTE bit 6 digital I/O (5.5V tolerant) that also serves as external memory address/data bit 14 and default ECCP1 PWM output P1B (when ECCPMX is set).
75 RE5/AD13/P1C bidirectional PORTE bit 5 digital I/O (5.5V tolerant) that also serves as external memory address/data bit 13 and default ECCP1 PWM output P1C (when ECCPMX is set).
76 RE4/AD12/P3B bidirectional PORTE bit 4 digital I/O (5.5V tolerant) that also serves as external memory address/data bit 12 and default ECCP3 PWM output P3B (when ECCPMX is set).
77 RE3/AD11/P3C bidirectional PORTE bit 3 digital I/O (5.5V tolerant) that also serves as external memory address/data bit 11 and default ECCP3 PWM output P3C (when ECCPMX is set).
78 RE2/AD10/CS/P2B bidirectional PORTE bit 2 digital I/O (5.5V tolerant) that also serves as external memory address/data bit 10, Parallel Slave Port chip select input CS, and ECCP2 PWM output B.
79 RH0/A16 bidirectional PORTH bit 0 digital I/O (5.5V tolerant) that becomes external memory address line A16, which takes priority over port data when the external memory interface is active.
80 RH1/A17 bidirectional PORTH bit 1 digital I/O (5.5V tolerant) that becomes external memory address line A17, which takes priority over port data when the external memory interface is active.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package TQFP-80(12x12)
Category Embedded Processors & Controllers
Pins 80

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Operating voltage range 2 3.6 V Operating Voltage Range, PIC18F87J10 family features list 3
Operating frequency 40 MHz Printed as 'DC, 40 MHz' for PIC18F85J10 in 80-pin device feature table (lower bound printed as DC, no numeric min) 9
High-current sink/source current, PORTB and PORTC 25 mA Printed as 25 mA sink / 25 mA source (PORTB and PORTC only) 3

CAD (KiCad official)

  • Symbol: PIC18F85J10-I
  • Footprint: Package_QFP:TQFP-80_12x12mm_P0.5mm
  • 3D model: TQFP-80(12x12) (KiCad packages3D, STEP)
  • 3D model files: pic18f85j10-i-etched.step / pic18f85j10-i-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pic18f85j10-i.step / pic18f85j10-i.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (410 pp, sha256 eade6a1496f93bf6, retrieved 2026-10-30, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF