main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers pic18f67j60-i: symbol viewer · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
pic18f67j60-i-etched.glb Publish 0.1.0 · Ray
pic18f67j60-i-etched.step pic18f67j60-i: factory component page (tier=mfr) · Ray
pic18f67j60-i-hero.glb pic18f67j60-i: hero GLB from the etched model (keeps the MPN mark) · Ray
pic18f67j60-i-hero.overlay.json Publish 0.1.0 · Ray
pic18f67j60-i.glb Publish 0.1.0 · Ray
pic18f67j60-i.kicad_mod Publish 0.1.0 · Ray
pic18f67j60-i.kicad_sym pic18f67j60-i: symbol repaired (body fitted to the names) · Ray
pic18f67j60-i.lbr pic18f67j60-i: symbol repaired (body fitted to the names) · Ray
pic18f67j60-i.step Publish 0.1.0 · Ray
README.md Publish 0.1.0 · Ray

PIC18F67J60-I

Microchip Tech · MICROCHIP · TQFP-64(10x10)

PIC18F67J60-I from Microchip Tech, in a TQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 RE1/P2C bidirectional Digital I/O with Schmitt Trigger input and weak pull-up enabled by REPU; also ECCP2 Enhanced PWM output C (P2C).
2 RE0/P2D bidirectional Digital I/O with Schmitt Trigger input and weak pull-up enabled by REPU; also ECCP2 Enhanced PWM output D (P2D).
3 RB0/INT0/FLT0 bidirectional Digital I/O with TTL input and weak pull-up when RBPU is cleared; also external interrupt 0 (Schmitt Trigger) and Enhanced PWM Fault input FLT0 enabled in software.
4 RB1/INT1 bidirectional Digital I/O with TTL input and weak pull-up when RBPU is cleared; also external interrupt 1 input (INT1).
5 RB2/INT2 bidirectional Digital I/O with TTL input and weak pull-up when RBPU is cleared; also external interrupt 2 input (INT2).
6 RB3/INT3 bidirectional Digital I/O with TTL input and weak pull-up when RBPU is cleared; also external interrupt 3 input (INT3).
7 MCLR input Master Clear (Reset) input; active-low Reset to the device.
8 RG4/CCP5/P1D bidirectional Digital I/O with Schmitt Trigger input; also CCP5 capture/compare/PWM pin and ECCP1 Enhanced PWM output D (P1D).
9 VSS power_in Ground reference for logic and I/O pins.
10 VDDCORE/VCAP power_in Core logic supply (VDDCORE) when the on-chip regulator is disabled; when the regulator is enabled this pin is the VCAP external filter capacitor connection and must use a 10 µF capacitor to ground and must not be connected to VDD.
11 RF7/SS1 bidirectional Digital I/O with Schmitt Trigger input; also SPI slave select input for MSSP1 (TTL).
12 RF6/AN11 bidirectional Digital I/O with Schmitt Trigger input (disabled when analog input is enabled); also analog input channel 11 and comparator C1- input.
13 RF5/AN10/CVREF bidirectional Digital I/O with Schmitt Trigger input; also analog input channel 10 (comparator C1+ input) and comparator voltage reference output CVREF.
14 RF4/AN9 bidirectional Digital I/O with Schmitt Trigger input (disabled when analog input is enabled); also analog input channel 9 and comparator C2- input.
15 RF3/AN8 bidirectional Digital I/O with Schmitt Trigger input (disabled when analog input is enabled); also analog input channel 8 and comparator C2+ input.
16 RF2/AN7/C1OUT bidirectional Digital I/O with Schmitt Trigger input (disabled when analog input is enabled); also analog input channel 7 and comparator 1 output C1OUT.
17 RF1/AN6/C2OUT bidirectional Digital I/O with Schmitt Trigger input (disabled when analog input is enabled); also analog input channel 6 and comparator 2 output C2OUT.
18 ENVREG input Enable for the on-chip voltage regulator; must be tied directly to VDD to enable the regulator or to ground to disable it.
19 AVDD power_in Positive supply for analog modules; must always be connected, regardless of whether analog modules are used.
20 AVSS power_in Ground reference for analog modules; must always be connected, regardless of whether analog modules are used.
21 RA3/AN3/VREF+ bidirectional Digital I/O with TTL input; also analog input channel 3 and A/D high reference voltage input VREF+.
22 RA2/AN2/VREF- bidirectional Digital I/O with TTL input; also analog input channel 2 (comparator C2+ input) and A/D and comparator low reference voltage input VREF-.
23 RA1/LEDB/AN1 bidirectional Digital I/O with TTL input; also Ethernet LEDB indicator output, which can directly drive an LED, and analog input channel 1.
24 RA0/LEDA/AN0 bidirectional Digital I/O with TTL input; also Ethernet LEDA indicator output, which can directly drive an LED, and analog input channel 0.
25 VSS power_in Ground reference for logic and I/O pins.
26 VDD power_in Positive supply for peripheral digital logic and I/O pins.
27 RA5/AN4 bidirectional Digital I/O with TTL input; also analog input channel 4.
28 RA4/T0CKI bidirectional Digital I/O with Schmitt Trigger input; also Timer0 external clock input T0CKI.
29 RC1/T1OSI/ECCP2/P2A bidirectional Digital I/O with Schmitt Trigger input; also Timer1 oscillator input T1OSI and ECCP2 capture/compare/PWM pin with Enhanced PWM output A (P2A).
30 RC0/T1OSO/T13CKI bidirectional Digital I/O with Schmitt Trigger input; also Timer1 oscillator output T1OSO and Timer1/Timer3 external clock input T13CKI.
31 RC6/TX1/CK1 bidirectional Digital I/O with Schmitt Trigger input; also EUSART1 asynchronous transmit TX1 or synchronous clock CK1.
32 RC7/RX1/DT1 bidirectional Digital I/O with Schmitt Trigger input; also EUSART1 asynchronous receive RX1 or synchronous data DT1.
33 RC2/ECCP1/P1A bidirectional Digital I/O with Schmitt Trigger input; also ECCP1 capture/compare/PWM pin with Enhanced PWM output A (P1A).
34 RC3/SCK1/SCL1 bidirectional Digital I/O with Schmitt Trigger input; also MSSP1 SPI clock (SCK1) or I2C clock (SCL1).
35 RC4/SDI1/SDA1 bidirectional Digital I/O with Schmitt Trigger input; also MSSP1 SPI data input (SDI1) or I2C data (SDA1).
36 RC5/SDO1 bidirectional Digital I/O with Schmitt Trigger input; also MSSP1 SPI data output (SDO1).
37 RB7/KBI3/PGD bidirectional Digital I/O with TTL input and weak pull-up when RBPU is cleared; also interrupt-on-change input KBI3 and ICSP/ICD serial data pin PGD.
38 VDD power_in Positive supply for peripheral digital logic and I/O pins.
39 OSC1/CLKI input Oscillator crystal or external clock source input; Schmitt Trigger buffer in internal RC mode and CMOS otherwise.
40 OSC2/CLKO output Oscillator crystal output connecting to a crystal or resonator; in internal RC mode outputs CLKO at 1/4 the OSC1 frequency.
41 VSS power_in Ground reference for logic and I/O pins.
42 RB6/KBI2/PGC bidirectional Digital I/O with TTL input and weak pull-up when RBPU is cleared; also interrupt-on-change input KBI2 and ICSP/ICD clock pin PGC.
43 RB5/KBI1 bidirectional Digital I/O with TTL input and weak pull-up when RBPU is cleared; also interrupt-on-change input KBI1.
44 RB4/KBI0 bidirectional Digital I/O with TTL input and weak pull-up when RBPU is cleared; also interrupt-on-change input KBI0.
45 VSSRX power_in Ground reference for the Ethernet PHY receive subsystem.
46 TPIN- input Analog Ethernet differential signal input (negative).
47 TPIN+ input Analog Ethernet differential signal input (positive).
48 VDDRX power_in Positive 3.3V supply for the Ethernet PHY receive subsystem.
49 VDDTX power_in Positive 3.3V supply for the Ethernet PHY transmit subsystem.
50 TPOUT- output Ethernet differential signal output (negative).
51 TPOUT+ output Ethernet differential signal output (positive).
52 VSSTX power_in Ground reference for the Ethernet PHY transmit subsystem.
53 RBIAS input Analog bias current input for the Ethernet PHY; must be tied to VSS via a resistor (see Section 19.0 for the specification).
54 VDDPLL power_in Positive 3.3V supply for the Ethernet PHY PLL.
55 VSSPLL power_in Ground reference for the Ethernet PHY PLL.
56 VSS power_in Ground reference for logic and I/O pins.
57 VDD power_in Positive supply for peripheral digital logic and I/O pins.
58 RD2/CCP4/P3D bidirectional Digital I/O with Schmitt Trigger input; also CCP4 capture/compare/PWM pin and ECCP3 Enhanced PWM output D (P3D).
59 RD1/ECCP3/P3A bidirectional Digital I/O with Schmitt Trigger input; also ECCP3 capture/compare/PWM pin with Enhanced PWM output A (P3A).
60 RD0/P1B bidirectional Digital I/O with Schmitt Trigger input and weak pull-up enabled by RDPU; also ECCP1 Enhanced PWM output B (P1B).
61 RE5/P1C bidirectional Digital I/O with Schmitt Trigger input and weak pull-up enabled by REPU; also ECCP1 Enhanced PWM output C (P1C).
62 RE4/P3B bidirectional Digital I/O with Schmitt Trigger input and weak pull-up enabled by REPU; also ECCP3 Enhanced PWM output B (P3B).
63 RE3/P3C bidirectional Digital I/O with Schmitt Trigger input and weak pull-up enabled by REPU; also ECCP3 Enhanced PWM output C (P3C).
64 RE2/P2B bidirectional Digital I/O with Schmitt Trigger input and weak pull-up enabled by REPU; also ECCP2 Enhanced PWM output B (P2B).

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package TQFP-64(10x10)
Category Embedded Processors & Controllers
Pins 64

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Operating voltage range 2.35 3.6 V 3
Operating voltage range using Ethernet module 3.1 3.6 V using Ethernet module 3
Operating frequency 41.667 MHz 13
High-current sink current 25 mA PORTB and PORTC 3
High-current source current 25 mA PORTB and PORTC 3
Digital-only input tolerated voltage 5.5 V Digital-only input pins (Table 11-2) 146
Program Flash erase/write endurance 100 erase/write cycles 11
Program Flash data retention 20 years 11
Ethernet clock source frequency 25 MHz Ethernet applications 51
VCAP/VDDCORE stabilization capacitor 10 µF Regulator enabled; connected to ground; ESR < 5 Ω 45

CAD (KiCad official)

  • Symbol: PIC18F67J60-I
  • Footprint: Package_QFP:TQFP-64_10x10mm_P0.5mm
  • 3D model: TQFP-64(10x10) (KiCad packages3D, STEP)
  • 3D model files: pic18f67j60-i-etched.step / pic18f67j60-i-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pic18f67j60-i.step / pic18f67j60-i.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (492 pp, sha256 a5190601007a9ae0, retrieved 2026-10-29, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF