component
PIC18F67J50T-I/PT
Public Made by Adomby adom
Microchip Tech Microcontroller Units (MCUs/MPUs/SOCs), TQFP-64(10x10). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Generated by kicad-footprint-generator · KiCad file format 20260206
PIC18F67J50T-I
Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · TQFP-64(10x10)
PIC18F67J50T-I from Microchip Tech, in a TQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RE1/PMWR/P2C | bidirectional | Digital I/O with Schmitt Trigger input; alternates as Parallel Master Port write strobe (PMWR) and ECCP2 Enhanced PWM output C (P2C). |
| 2 | RE0/PMRD/P2D | bidirectional | Digital I/O with Schmitt Trigger input; alternates as Parallel Master Port read strobe (PMRD) and ECCP2 Enhanced PWM output D (P2D). |
| 3 | RG0/PMA8/ECCP3/P3A | bidirectional | Digital I/O with Schmitt Trigger input; alternates as Parallel Master Port address (PMA8), ECCP3 capture input/compare output, and ECCP3 Enhanced PWM output A (P3A). |
| 4 | RG1/PMA7/TX2/CK2 | bidirectional | Digital I/O with Schmitt Trigger input; alternates as Parallel Master Port address (PMA7), EUSART2 asynchronous transmit (TX2) and EUSART2 synchronous clock (CK2). |
| 5 | RG2/PMA6/RX2/DT2 | bidirectional | Digital I/O with Schmitt Trigger input; alternates as Parallel Master Port address (PMA6), EUSART2 asynchronous receive (RX2) and EUSART2 synchronous data (DT2). |
| 6 | RG3/PMCS1/CCP4/P3D | bidirectional | Digital I/O with Schmitt Trigger input; alternates as Parallel Master Port chip select 1 (PMCS1), CCP4 capture/compare/PWM, and ECCP3 Enhanced PWM output D (P3D). |
| 7 | MCLR | input | Master Clear (Reset) input; an active-low Reset to the device. |
| 8 | RG4/PMCS2/CCP5/P1D | bidirectional | Digital I/O with Schmitt Trigger input; alternates as Parallel Master Port chip select 2 (PMCS2), CCP5 capture/compare/PWM, and ECCP1 Enhanced PWM output D (P1D). |
| 9 | VSS | power_in | Ground reference for logic and I/O pins. |
| 10 | VDDCORE/VCAP | power_in | Core logic power supply when the regulator is disabled, or external filter capacitor connection when the regulator is enabled. |
| 11 | RF7/SS1/C1OUT | bidirectional | Digital I/O with Schmitt Trigger input; alternates as MSSP1 SPI slave select input (SS1) and Comparator 1 output (C1OUT). |
| 12 | RF6/AN11/C1INA | bidirectional | Digital I/O with Schmitt Trigger input; alternates as A/D analog input 11 (AN11) and Comparator 1 input A (C1INA). |
| 13 | RF5/AN10/C1INB/CVREF | bidirectional | Digital I/O with Schmitt Trigger input; alternates as A/D analog input 10 (AN10), Comparator 1 input B (C1INB), and comparator voltage reference output (CVREF). |
| 14 | RF4/D+ | bidirectional | Digital input with Schmitt Trigger buffer; serves as the USB differential plus line (D+) for the on-chip transceiver when USB is enabled. |
| 15 | RF3/D- | bidirectional | Digital input with Schmitt Trigger buffer; serves as the USB differential minus line (D-) for the on-chip transceiver when USB is enabled. |
| 16 | RF2/PMA5/AN7/C2INB | bidirectional | Digital I/O with Schmitt Trigger input; alternates as Parallel Master Port address (PMA5), A/D analog input 7 (AN7), and Comparator 2 input B (C2INB). |
| 17 | VUSB | power_in | USB voltage input pin. |
| 18 | ENVREG | input | Enable input for the on-chip voltage regulator (Schmitt Trigger input). |
| 19 | AVDD | power_in | Positive supply for analog modules. |
| 20 | AVSS | power_in | Ground reference for analog modules. |
| 21 | RA3/AN3/VREF+ | bidirectional | Digital I/O with TTL input; alternates as A/D analog input 3 (AN3) and A/D high reference voltage input (VREF+). |
| 22 | RA2/AN2/VREF- | bidirectional | Digital I/O with TTL input; alternates as A/D analog input 2 (AN2) and A/D low reference voltage input (VREF-). |
| 23 | RA1/AN1 | bidirectional | Digital I/O with TTL input; alternates as A/D analog input 1 (AN1). |
| 24 | RA0/AN0 | bidirectional | Digital I/O with TTL input; alternates as A/D analog input 0 (AN0). |
| 25 | VSS | power_in | Ground reference for logic and I/O pins. |
| 26 | VDD | power_in | Positive supply for peripheral digital logic and I/O pins. |
| 27 | RA5/AN4/C2INA | bidirectional | Digital I/O with TTL input; alternates as A/D analog input 4 (AN4) and Comparator 2 input A (C2INA). |
| 28 | RA4/T0CKI | bidirectional | Digital I/O with Schmitt Trigger input; alternates as Timer0 external clock input (T0CKI). |
| 29 | RC1/T1OSI/ECCP2/P2A | bidirectional | Digital I/O with Schmitt Trigger input; alternates as Timer1 oscillator input (T1OSI), ECCP2 capture/compare/PWM, and ECCP2 Enhanced PWM output A (P2A), the default ECCP2 assignment when CCP2MX is set. |
| 30 | RC0/T1OSO/T13CKI | bidirectional | Digital I/O with Schmitt Trigger input; alternates as Timer1 oscillator output (T1OSO) and Timer1/Timer3 external clock input (T13CKI). |
| 31 | RC6/TX1/CK1 | bidirectional | Digital I/O with Schmitt Trigger input; alternates as EUSART1 asynchronous transmit (TX1) and EUSART1 synchronous clock (CK1). |
| 32 | RC7/RX1/DT1 | bidirectional | Digital I/O with Schmitt Trigger input; alternates as EUSART1 asynchronous receive (RX1) and EUSART1 synchronous data (DT1). |
| 33 | RC2/ECCP1/P1A | bidirectional | Digital I/O with Schmitt Trigger input; alternates as ECCP1 capture/compare/PWM and ECCP1 Enhanced PWM output A (P1A). |
| 34 | RC3/SCK1/SCL1 | bidirectional | Digital I/O with Schmitt Trigger input; alternates as MSSP1 SPI clock (SCK1) and I2C clock (SCL1). |
| 35 | RC4/SDI1/SDA1 | bidirectional | Digital I/O with Schmitt Trigger input; alternates as MSSP1 SPI data input (SDI1) and I2C data (SDA1). |
| 36 | RC5/SDO1/C2OUT | bidirectional | Digital I/O with Schmitt Trigger input; alternates as MSSP1 SPI data output (SDO1) and Comparator 2 output (C2OUT). |
| 37 | RB7/KBI3/PGD | bidirectional | Digital I/O with TTL input and weak pull-up; alternates as interrupt-on-change pin KBI3 and ICD/ICSP programming data (PGD). |
| 38 | VDD | power_in | Positive supply for peripheral digital logic and I/O pins. |
| 39 | OSC1/CLKI/RA7 | bidirectional | Oscillator crystal or external clock input (OSC1/CLKI); becomes general purpose I/O RA7 only when OSC1 is not used for the clock function. |
| 40 | OSC2/CLKO/RA6 | bidirectional | Oscillator crystal output or CLKO (FOSC/4) output (OSC2/CLKO); becomes general purpose I/O RA6 only when OSC2 is not used for the clock function. |
| 41 | VSS | power_in | Ground reference for logic and I/O pins. |
| 42 | RB6/KBI2/PGC | bidirectional | Digital I/O with TTL input and weak pull-up; alternates as interrupt-on-change pin KBI2 and ICD/ICSP programming clock (PGC). |
| 43 | RB5/KBI1/PMA0 | bidirectional | Digital I/O with TTL input and weak pull-up; alternates as interrupt-on-change pin KBI1 and Parallel Master Port address (PMA0). |
| 44 | RB4/KBI0/PMA1 | bidirectional | Digital I/O with TTL input and weak pull-up; alternates as interrupt-on-change pin KBI0 and Parallel Master Port address (PMA1). |
| 45 | RB3/INT3/PMA2 | bidirectional | Digital I/O with TTL input and weak pull-up; alternates as external interrupt 3 (INT3) and Parallel Master Port address (PMA2). |
| 46 | RB2/INT2/PMA3 | bidirectional | Digital I/O with TTL input and weak pull-up; alternates as external interrupt 2 (INT2) and Parallel Master Port address (PMA3). |
| 47 | RB1/INT1/PMA4 | bidirectional | Digital I/O with TTL input and weak pull-up; alternates as external interrupt 1 (INT1) and Parallel Master Port address (PMA4). |
| 48 | RB0/FLT0/INT0 | bidirectional | Digital I/O with TTL input and weak pull-up; alternates as ECCP1/2/3 Enhanced PWM Fault input (FLT0) and external interrupt 0 (INT0). |
| 49 | RD7/PMD7/SS2 | bidirectional | Digital I/O with Schmitt Trigger input; alternates as Parallel Master Port data (PMD7) and MSSP2 SPI slave select input (SS2). |
| 50 | RD6/PMD6/SCK2/SCL2 | bidirectional | Digital I/O with Schmitt Trigger input; alternates as Parallel Master Port data (PMD6), MSSP2 SPI clock (SCK2) and I2C clock (SCL2). |
| 51 | RD5/PMD5/SDI2/SDA2 | bidirectional | Digital I/O with Schmitt Trigger input; alternates as Parallel Master Port data (PMD5), MSSP2 SPI data input (SDI2) and I2C data (SDA2). |
| 52 | RD4/PMD4/SDO2 | bidirectional | Digital I/O with Schmitt Trigger input; alternates as Parallel Master Port data (PMD4) and MSSP2 SPI data output (SDO2). |
| 53 | RD3/PMD3 | bidirectional | Digital I/O with Schmitt Trigger input; alternates as Parallel Master Port data (PMD3). |
| 54 | RD2/PMD2 | bidirectional | Digital I/O with Schmitt Trigger input; alternates as Parallel Master Port data (PMD2). |
| 55 | RD1/PMD1 | bidirectional | Digital I/O with Schmitt Trigger input; alternates as Parallel Master Port data (PMD1). |
| 56 | VSS | power_in | Ground reference for logic and I/O pins. |
| 57 | VDD | power_in | Positive supply for peripheral digital logic and I/O pins. |
| 58 | RD0/PMD0 | bidirectional | Digital I/O with Schmitt Trigger input; alternates as Parallel Master Port data (PMD0). |
| 59 | RE7/PMA9/ECCP2/P2A | bidirectional | Digital I/O with Schmitt Trigger input; alternates as Parallel Master Port address (PMA9) and, when CCP2MX is cleared, ECCP2 capture/compare/PWM and ECCP2 Enhanced PWM output A (P2A). |
| 60 | RE6/PMA10/P1B | bidirectional | Digital I/O with Schmitt Trigger input; alternates as Parallel Master Port address (PMA10) and ECCP1 Enhanced PWM output B (P1B). |
| 61 | RE5/PMA11/P1C | bidirectional | Digital I/O with Schmitt Trigger input; alternates as Parallel Master Port address (PMA11) and ECCP1 Enhanced PWM output C (P1C). |
| 62 | RE4/PMA12/P3B | bidirectional | Digital I/O with Schmitt Trigger input; alternates as Parallel Master Port address (PMA12) and ECCP3 Enhanced PWM output B (P3B). |
| 63 | RE3/PMA13/P3C/REFO | bidirectional | Digital I/O with Schmitt Trigger input; alternates as Parallel Master Port address (PMA13), ECCP3 Enhanced PWM output C (P3C), and reference clock output (REFO). |
| 64 | RE2/PMBE/P2B | bidirectional | Digital I/O with Schmitt Trigger input; alternates as Parallel Master Port byte enable (PMBE) and ECCP2 Enhanced PWM output B (P2B). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | TQFP-64(10x10) |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 64 |
CAD (KiCad official)
- Symbol:
PIC18F67J50T-I - Footprint:
Package_QFP:TQFP-64_10x10mm_P0.5mm - 3D model: TQFP-64(10x10) (KiCad packages3D, STEP)
- 3D model files:
pic18f67j50t-i-pt-etched.step/pic18f67j50t-i-pt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic18f67j50t-i-pt.step/pic18f67j50t-i-pt.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (480 pp, sha256
88bc899e2743258d, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).