Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

PIC18F67J50T-I

Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · TQFP-64(10x10)

PIC18F67J50T-I from Microchip Tech, in a TQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 RE1/PMWR/P2C bidirectional Digital I/O with Schmitt Trigger input; alternates as Parallel Master Port write strobe (PMWR) and ECCP2 Enhanced PWM output C (P2C).
2 RE0/PMRD/P2D bidirectional Digital I/O with Schmitt Trigger input; alternates as Parallel Master Port read strobe (PMRD) and ECCP2 Enhanced PWM output D (P2D).
3 RG0/PMA8/ECCP3/P3A bidirectional Digital I/O with Schmitt Trigger input; alternates as Parallel Master Port address (PMA8), ECCP3 capture input/compare output, and ECCP3 Enhanced PWM output A (P3A).
4 RG1/PMA7/TX2/CK2 bidirectional Digital I/O with Schmitt Trigger input; alternates as Parallel Master Port address (PMA7), EUSART2 asynchronous transmit (TX2) and EUSART2 synchronous clock (CK2).
5 RG2/PMA6/RX2/DT2 bidirectional Digital I/O with Schmitt Trigger input; alternates as Parallel Master Port address (PMA6), EUSART2 asynchronous receive (RX2) and EUSART2 synchronous data (DT2).
6 RG3/PMCS1/CCP4/P3D bidirectional Digital I/O with Schmitt Trigger input; alternates as Parallel Master Port chip select 1 (PMCS1), CCP4 capture/compare/PWM, and ECCP3 Enhanced PWM output D (P3D).
7 MCLR input Master Clear (Reset) input; an active-low Reset to the device.
8 RG4/PMCS2/CCP5/P1D bidirectional Digital I/O with Schmitt Trigger input; alternates as Parallel Master Port chip select 2 (PMCS2), CCP5 capture/compare/PWM, and ECCP1 Enhanced PWM output D (P1D).
9 VSS power_in Ground reference for logic and I/O pins.
10 VDDCORE/VCAP power_in Core logic power supply when the regulator is disabled, or external filter capacitor connection when the regulator is enabled.
11 RF7/SS1/C1OUT bidirectional Digital I/O with Schmitt Trigger input; alternates as MSSP1 SPI slave select input (SS1) and Comparator 1 output (C1OUT).
12 RF6/AN11/C1INA bidirectional Digital I/O with Schmitt Trigger input; alternates as A/D analog input 11 (AN11) and Comparator 1 input A (C1INA).
13 RF5/AN10/C1INB/CVREF bidirectional Digital I/O with Schmitt Trigger input; alternates as A/D analog input 10 (AN10), Comparator 1 input B (C1INB), and comparator voltage reference output (CVREF).
14 RF4/D+ bidirectional Digital input with Schmitt Trigger buffer; serves as the USB differential plus line (D+) for the on-chip transceiver when USB is enabled.
15 RF3/D- bidirectional Digital input with Schmitt Trigger buffer; serves as the USB differential minus line (D-) for the on-chip transceiver when USB is enabled.
16 RF2/PMA5/AN7/C2INB bidirectional Digital I/O with Schmitt Trigger input; alternates as Parallel Master Port address (PMA5), A/D analog input 7 (AN7), and Comparator 2 input B (C2INB).
17 VUSB power_in USB voltage input pin.
18 ENVREG input Enable input for the on-chip voltage regulator (Schmitt Trigger input).
19 AVDD power_in Positive supply for analog modules.
20 AVSS power_in Ground reference for analog modules.
21 RA3/AN3/VREF+ bidirectional Digital I/O with TTL input; alternates as A/D analog input 3 (AN3) and A/D high reference voltage input (VREF+).
22 RA2/AN2/VREF- bidirectional Digital I/O with TTL input; alternates as A/D analog input 2 (AN2) and A/D low reference voltage input (VREF-).
23 RA1/AN1 bidirectional Digital I/O with TTL input; alternates as A/D analog input 1 (AN1).
24 RA0/AN0 bidirectional Digital I/O with TTL input; alternates as A/D analog input 0 (AN0).
25 VSS power_in Ground reference for logic and I/O pins.
26 VDD power_in Positive supply for peripheral digital logic and I/O pins.
27 RA5/AN4/C2INA bidirectional Digital I/O with TTL input; alternates as A/D analog input 4 (AN4) and Comparator 2 input A (C2INA).
28 RA4/T0CKI bidirectional Digital I/O with Schmitt Trigger input; alternates as Timer0 external clock input (T0CKI).
29 RC1/T1OSI/ECCP2/P2A bidirectional Digital I/O with Schmitt Trigger input; alternates as Timer1 oscillator input (T1OSI), ECCP2 capture/compare/PWM, and ECCP2 Enhanced PWM output A (P2A), the default ECCP2 assignment when CCP2MX is set.
30 RC0/T1OSO/T13CKI bidirectional Digital I/O with Schmitt Trigger input; alternates as Timer1 oscillator output (T1OSO) and Timer1/Timer3 external clock input (T13CKI).
31 RC6/TX1/CK1 bidirectional Digital I/O with Schmitt Trigger input; alternates as EUSART1 asynchronous transmit (TX1) and EUSART1 synchronous clock (CK1).
32 RC7/RX1/DT1 bidirectional Digital I/O with Schmitt Trigger input; alternates as EUSART1 asynchronous receive (RX1) and EUSART1 synchronous data (DT1).
33 RC2/ECCP1/P1A bidirectional Digital I/O with Schmitt Trigger input; alternates as ECCP1 capture/compare/PWM and ECCP1 Enhanced PWM output A (P1A).
34 RC3/SCK1/SCL1 bidirectional Digital I/O with Schmitt Trigger input; alternates as MSSP1 SPI clock (SCK1) and I2C clock (SCL1).
35 RC4/SDI1/SDA1 bidirectional Digital I/O with Schmitt Trigger input; alternates as MSSP1 SPI data input (SDI1) and I2C data (SDA1).
36 RC5/SDO1/C2OUT bidirectional Digital I/O with Schmitt Trigger input; alternates as MSSP1 SPI data output (SDO1) and Comparator 2 output (C2OUT).
37 RB7/KBI3/PGD bidirectional Digital I/O with TTL input and weak pull-up; alternates as interrupt-on-change pin KBI3 and ICD/ICSP programming data (PGD).
38 VDD power_in Positive supply for peripheral digital logic and I/O pins.
39 OSC1/CLKI/RA7 bidirectional Oscillator crystal or external clock input (OSC1/CLKI); becomes general purpose I/O RA7 only when OSC1 is not used for the clock function.
40 OSC2/CLKO/RA6 bidirectional Oscillator crystal output or CLKO (FOSC/4) output (OSC2/CLKO); becomes general purpose I/O RA6 only when OSC2 is not used for the clock function.
41 VSS power_in Ground reference for logic and I/O pins.
42 RB6/KBI2/PGC bidirectional Digital I/O with TTL input and weak pull-up; alternates as interrupt-on-change pin KBI2 and ICD/ICSP programming clock (PGC).
43 RB5/KBI1/PMA0 bidirectional Digital I/O with TTL input and weak pull-up; alternates as interrupt-on-change pin KBI1 and Parallel Master Port address (PMA0).
44 RB4/KBI0/PMA1 bidirectional Digital I/O with TTL input and weak pull-up; alternates as interrupt-on-change pin KBI0 and Parallel Master Port address (PMA1).
45 RB3/INT3/PMA2 bidirectional Digital I/O with TTL input and weak pull-up; alternates as external interrupt 3 (INT3) and Parallel Master Port address (PMA2).
46 RB2/INT2/PMA3 bidirectional Digital I/O with TTL input and weak pull-up; alternates as external interrupt 2 (INT2) and Parallel Master Port address (PMA3).
47 RB1/INT1/PMA4 bidirectional Digital I/O with TTL input and weak pull-up; alternates as external interrupt 1 (INT1) and Parallel Master Port address (PMA4).
48 RB0/FLT0/INT0 bidirectional Digital I/O with TTL input and weak pull-up; alternates as ECCP1/2/3 Enhanced PWM Fault input (FLT0) and external interrupt 0 (INT0).
49 RD7/PMD7/SS2 bidirectional Digital I/O with Schmitt Trigger input; alternates as Parallel Master Port data (PMD7) and MSSP2 SPI slave select input (SS2).
50 RD6/PMD6/SCK2/SCL2 bidirectional Digital I/O with Schmitt Trigger input; alternates as Parallel Master Port data (PMD6), MSSP2 SPI clock (SCK2) and I2C clock (SCL2).
51 RD5/PMD5/SDI2/SDA2 bidirectional Digital I/O with Schmitt Trigger input; alternates as Parallel Master Port data (PMD5), MSSP2 SPI data input (SDI2) and I2C data (SDA2).
52 RD4/PMD4/SDO2 bidirectional Digital I/O with Schmitt Trigger input; alternates as Parallel Master Port data (PMD4) and MSSP2 SPI data output (SDO2).
53 RD3/PMD3 bidirectional Digital I/O with Schmitt Trigger input; alternates as Parallel Master Port data (PMD3).
54 RD2/PMD2 bidirectional Digital I/O with Schmitt Trigger input; alternates as Parallel Master Port data (PMD2).
55 RD1/PMD1 bidirectional Digital I/O with Schmitt Trigger input; alternates as Parallel Master Port data (PMD1).
56 VSS power_in Ground reference for logic and I/O pins.
57 VDD power_in Positive supply for peripheral digital logic and I/O pins.
58 RD0/PMD0 bidirectional Digital I/O with Schmitt Trigger input; alternates as Parallel Master Port data (PMD0).
59 RE7/PMA9/ECCP2/P2A bidirectional Digital I/O with Schmitt Trigger input; alternates as Parallel Master Port address (PMA9) and, when CCP2MX is cleared, ECCP2 capture/compare/PWM and ECCP2 Enhanced PWM output A (P2A).
60 RE6/PMA10/P1B bidirectional Digital I/O with Schmitt Trigger input; alternates as Parallel Master Port address (PMA10) and ECCP1 Enhanced PWM output B (P1B).
61 RE5/PMA11/P1C bidirectional Digital I/O with Schmitt Trigger input; alternates as Parallel Master Port address (PMA11) and ECCP1 Enhanced PWM output C (P1C).
62 RE4/PMA12/P3B bidirectional Digital I/O with Schmitt Trigger input; alternates as Parallel Master Port address (PMA12) and ECCP3 Enhanced PWM output B (P3B).
63 RE3/PMA13/P3C/REFO bidirectional Digital I/O with Schmitt Trigger input; alternates as Parallel Master Port address (PMA13), ECCP3 Enhanced PWM output C (P3C), and reference clock output (REFO).
64 RE2/PMBE/P2B bidirectional Digital I/O with Schmitt Trigger input; alternates as Parallel Master Port byte enable (PMBE) and ECCP2 Enhanced PWM output B (P2B).

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package TQFP-64(10x10)
Category Single Chip Microcomputer/Microcontroller
Pins 64

CAD (KiCad official)

  • Symbol: PIC18F67J50T-I
  • Footprint: Package_QFP:TQFP-64_10x10mm_P0.5mm
  • 3D model: TQFP-64(10x10) (KiCad packages3D, STEP)
  • 3D model files: pic18f67j50t-i-pt-etched.step / pic18f67j50t-i-pt-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pic18f67j50t-i-pt.step / pic18f67j50t-i-pt.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (480 pp, sha256 88bc899e2743258d, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF