Generated by kicad-footprint-generator · KiCad file format 20260206
PIC18F6527-I
Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · TQFP-64(10x10)
PIC18F6527-I from Microchip Tech, in a TQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RE1/WR/P2C | bidirectional | Digital I/O with Schmitt Trigger input; also Parallel Slave Port write control input (WR) and ECCP2 PWM output C. |
| 2 | RE0/RD/P2D | bidirectional | Digital I/O with Schmitt Trigger input; also Parallel Slave Port read control input (RD) and ECCP2 PWM output D. |
| 3 | RG0/ECCP3/P3A | bidirectional | Digital I/O with Schmitt Trigger input; also ECCP3 capture input/compare output and ECCP3 PWM output A. |
| 4 | RG1/TX2/CK2 | bidirectional | Digital I/O with Schmitt Trigger input; also EUSART2 asynchronous transmit (TX2) and synchronous clock (CK2). |
| 5 | RG2/RX2/DT2 | bidirectional | Digital I/O with Schmitt Trigger input; also EUSART2 asynchronous receive (RX2) and synchronous data (DT2). |
| 6 | RG3/CCP4/P3D | bidirectional | Digital I/O with Schmitt Trigger input; also CCP4 capture/compare/PWM output and ECCP3 PWM output D. |
| 7 | RG5/MCLR/VPP | input | Input-only pin: active-low Master Clear (Reset) input when MCLR is enabled, otherwise digital input; also programming voltage input VPP. |
| 8 | RG4/CCP5/P1D | bidirectional | Digital I/O with Schmitt Trigger input; also CCP5 capture/compare/PWM output and ECCP1 PWM output D. |
| 9 | VSS | power_in | Ground reference for logic and I/O pins. |
| 10 | VDD | power_in | Positive supply for logic and I/O pins. |
| 11 | RF7/SS1 | bidirectional | Digital I/O with Schmitt Trigger input; also SPI slave select input for MSSP1 (TTL input). |
| 12 | RF6/AN11 | bidirectional | Digital I/O with Schmitt Trigger input; also A/D analog input channel 11 and Comparator C1- input. |
| 13 | RF5/AN10/CVREF | bidirectional | Digital I/O with Schmitt Trigger input; also A/D analog input channel 10 and comparator voltage reference output CVREF. |
| 14 | RF4/AN9 | bidirectional | Digital I/O with Schmitt Trigger input; also A/D analog input channel 9 and Comparator C2- input. |
| 15 | RF3/AN8 | bidirectional | Digital I/O with Schmitt Trigger input; also A/D analog input channel 8 and Comparator C2+ input. |
| 16 | RF2/AN7/C1OUT | bidirectional | Digital I/O with Schmitt Trigger input; also A/D analog input channel 7 and Comparator 1 output. |
| 17 | RF1/AN6/C2OUT | bidirectional | Digital I/O with Schmitt Trigger input; also A/D analog input channel 6 and Comparator 2 output. |
| 18 | RF0/AN5 | bidirectional | Digital I/O with Schmitt Trigger input; also A/D analog input channel 5. |
| 19 | AVDD | power_in | Positive supply for analog modules. |
| 20 | AVSS | power_in | Ground reference for analog modules. |
| 21 | RA3/AN3/VREF+ | bidirectional | Digital I/O with TTL input; also A/D analog input channel 3 and A/D reference voltage (high) input VREF+. |
| 22 | RA2/AN2/VREF- | bidirectional | Digital I/O with TTL input; also A/D analog input channel 2 and A/D reference voltage (low) input VREF-. |
| 23 | RA1/AN1 | bidirectional | Digital I/O with TTL input; also A/D analog input channel 1. |
| 24 | RA0/AN0 | bidirectional | Digital I/O with TTL input; also A/D analog input channel 0. |
| 25 | VSS | power_in | Ground reference for logic and I/O pins. |
| 26 | VDD | power_in | Positive supply for logic and I/O pins. |
| 27 | RA5/AN4/HLVDIN | bidirectional | Digital I/O with TTL input; also A/D analog input channel 4 and High/Low-Voltage Detect input HLVDIN. |
| 28 | RA4/T0CKI | bidirectional | Digital I/O with Schmitt Trigger input; also Timer0 external clock input T0CKI. |
| 29 | RC1/T1OSI/ECCP2/P2A | bidirectional | Digital I/O with Schmitt Trigger input; also Timer1 oscillator input T1OSI and ECCP2 capture/compare/PWM output A. |
| 30 | RC0/T1OSO/T13CKI | bidirectional | Digital I/O with Schmitt Trigger input; also Timer1 oscillator output T1OSO and Timer1/Timer3 external clock input T13CKI. |
| 31 | RC6/TX1/CK1 | bidirectional | Digital I/O with Schmitt Trigger input; also EUSART1 asynchronous transmit (TX1) and synchronous clock (CK1). |
| 32 | RC7/RX1/DT1 | bidirectional | Digital I/O with Schmitt Trigger input; also EUSART1 asynchronous receive (RX1) and synchronous data (DT1). |
| 33 | RC2/ECCP1/P1A | bidirectional | Digital I/O with Schmitt Trigger input; also ECCP1 capture/compare/PWM output and ECCP1 PWM output A. |
| 34 | RC3/SCK1/SCL1 | bidirectional | Digital I/O with Schmitt Trigger input; also MSSP1 SPI clock (SCK1) and I2C clock (SCL1). |
| 35 | RC4/SDI1/SDA1 | bidirectional | Digital I/O with Schmitt Trigger input; also MSSP1 SPI data input (SDI1) and I2C data (SDA1). |
| 36 | RC5/SDO1 | bidirectional | Digital I/O with Schmitt Trigger input; also MSSP1 SPI data output (SDO1). |
| 37 | RB7/KBI3/PGD | bidirectional | Digital I/O with TTL input and weak pull-up; also interrupt-on-change KBI3 and ICSP/ICD programming data PGD. |
| 38 | VDD | power_in | Positive supply for logic and I/O pins. |
| 39 | OSC1/CLKI/RA7 | input | Oscillator crystal or external clock input (OSC1/CLKI); also digital I/O RA7 in modes where OSC1 is not used as oscillator. |
| 40 | OSC2/CLKO/RA6 | output | Oscillator crystal output or clock output (OSC2/CLKO, FOSC/4 in RC/EC modes); also digital I/O RA6 in modes where OSC2 is not used as oscillator. |
| 41 | VSS | power_in | Ground reference for logic and I/O pins. |
| 42 | RB6/KBI2/PGC | bidirectional | Digital I/O with TTL input and weak pull-up; also interrupt-on-change KBI2 and ICSP/ICD programming clock PGC. |
| 43 | RB5/KBI1/PGM | bidirectional | Digital I/O with TTL input and weak pull-up; also interrupt-on-change KBI1 and low-voltage ICSP programming enable PGM. |
| 44 | RB4/KBI0 | bidirectional | Digital I/O with TTL input and weak pull-up; also interrupt-on-change KBI0. |
| 45 | RB3/INT3 | bidirectional | Digital I/O with TTL input and weak pull-up; also external interrupt 3 (INT3). |
| 46 | RB2/INT2 | bidirectional | Digital I/O with TTL input and weak pull-up; also external interrupt 2 (INT2). |
| 47 | RB1/INT1 | bidirectional | Digital I/O with TTL input and weak pull-up; also external interrupt 1 (INT1). |
| 48 | RB0/INT0/FLT0 | bidirectional | Digital I/O with TTL input and weak pull-up; also external interrupt 0 (INT0) and PWM Fault input FLT0 for ECCPx. |
| 49 | RD7/PSP7/SS2 | bidirectional | Digital I/O with Schmitt Trigger input; also Parallel Slave Port data bit 7 and SPI slave select input for MSSP2. |
| 50 | RD6/PSP6/SCK2/SCL2 | bidirectional | Digital I/O with Schmitt Trigger input; also Parallel Slave Port data bit 6 and MSSP2 SPI clock (SCK2) / I2C clock (SCL2). |
| 51 | RD5/PSP5/SDI2/SDA2 | bidirectional | Digital I/O with Schmitt Trigger input; also Parallel Slave Port data bit 5 and MSSP2 SPI data input (SDI2) / I2C data (SDA2). |
| 52 | RD4/PSP4/SDO2 | bidirectional | Digital I/O with Schmitt Trigger input; also Parallel Slave Port data bit 4 and MSSP2 SPI data output (SDO2). |
| 53 | RD3/PSP3 | bidirectional | Digital I/O with Schmitt Trigger input; also Parallel Slave Port data bit 3. |
| 54 | RD2/PSP2 | bidirectional | Digital I/O with Schmitt Trigger input; also Parallel Slave Port data bit 2. |
| 55 | RD1/PSP1 | bidirectional | Digital I/O with Schmitt Trigger input; also Parallel Slave Port data bit 1. |
| 56 | VSS | power_in | Ground reference for logic and I/O pins. |
| 57 | VDD | power_in | Positive supply for logic and I/O pins. |
| 58 | RD0/PSP0 | bidirectional | Digital I/O with Schmitt Trigger input; also Parallel Slave Port data bit 0. |
| 59 | RE7/ECCP2/P2A | bidirectional | Digital I/O with Schmitt Trigger input; also ECCP2 capture/compare output and ECCP2 PWM output A (alternate ECCP2 pin). |
| 60 | RE6/P1B | bidirectional | Digital I/O with Schmitt Trigger input; also ECCP1 Enhanced PWM output channel B. |
| 61 | RE5/P1C | bidirectional | Digital I/O with Schmitt Trigger input; also ECCP1 Enhanced PWM output channel C. |
| 62 | RE4/P3B | bidirectional | Digital I/O with Schmitt Trigger input; also ECCP3 Enhanced PWM output channel B. |
| 63 | RE3/P3C | bidirectional | Digital I/O with Schmitt Trigger input; also ECCP3 Enhanced PWM output channel C. |
| 64 | RE2/CS/P2B | bidirectional | Digital I/O with Schmitt Trigger input; also Parallel Slave Port chip select input (CS) and ECCP2 PWM output B. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | TQFP-64(10x10) |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 64 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating VDD range (standard F device) | VDD | 4.2 | 5.5 | V | 11 | ||
| Operating Frequency | 40 | MHz | Printed as DC, 40 MHz | 11 | |||
| RC oscillator external resistor REXT | REXT | 3 | 100 | kΩ | RC oscillator mode, recommended values | 35 | |
| RC oscillator external capacitor CEXT | CEXT | 20 | 300 | pF | RC oscillator mode, recommended values | 35 | |
| MCLR pull-up resistor for POR | 1 | 10 | kΩ | MCLR tied through resistor to VDD for power-on reset | 53 |
CAD (KiCad official)
- Symbol:
PIC18F6527-I - Footprint:
Package_QFP:TQFP-64_10x10mm_P0.5mm - 3D model: TQFP-64(10x10) (KiCad packages3D, STEP)
- 3D model files:
pic18f6527-i-etched.step/pic18f6527-i-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic18f6527-i.step/pic18f6527-i.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (446 pp, sha256
3c49d4b5c2f54a31, retrieved 2026-11-02, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).