Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

PIC18F6527-I

Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · TQFP-64(10x10)

PIC18F6527-I from Microchip Tech, in a TQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 RE1/WR/P2C bidirectional Digital I/O with Schmitt Trigger input; also Parallel Slave Port write control input (WR) and ECCP2 PWM output C.
2 RE0/RD/P2D bidirectional Digital I/O with Schmitt Trigger input; also Parallel Slave Port read control input (RD) and ECCP2 PWM output D.
3 RG0/ECCP3/P3A bidirectional Digital I/O with Schmitt Trigger input; also ECCP3 capture input/compare output and ECCP3 PWM output A.
4 RG1/TX2/CK2 bidirectional Digital I/O with Schmitt Trigger input; also EUSART2 asynchronous transmit (TX2) and synchronous clock (CK2).
5 RG2/RX2/DT2 bidirectional Digital I/O with Schmitt Trigger input; also EUSART2 asynchronous receive (RX2) and synchronous data (DT2).
6 RG3/CCP4/P3D bidirectional Digital I/O with Schmitt Trigger input; also CCP4 capture/compare/PWM output and ECCP3 PWM output D.
7 RG5/MCLR/VPP input Input-only pin: active-low Master Clear (Reset) input when MCLR is enabled, otherwise digital input; also programming voltage input VPP.
8 RG4/CCP5/P1D bidirectional Digital I/O with Schmitt Trigger input; also CCP5 capture/compare/PWM output and ECCP1 PWM output D.
9 VSS power_in Ground reference for logic and I/O pins.
10 VDD power_in Positive supply for logic and I/O pins.
11 RF7/SS1 bidirectional Digital I/O with Schmitt Trigger input; also SPI slave select input for MSSP1 (TTL input).
12 RF6/AN11 bidirectional Digital I/O with Schmitt Trigger input; also A/D analog input channel 11 and Comparator C1- input.
13 RF5/AN10/CVREF bidirectional Digital I/O with Schmitt Trigger input; also A/D analog input channel 10 and comparator voltage reference output CVREF.
14 RF4/AN9 bidirectional Digital I/O with Schmitt Trigger input; also A/D analog input channel 9 and Comparator C2- input.
15 RF3/AN8 bidirectional Digital I/O with Schmitt Trigger input; also A/D analog input channel 8 and Comparator C2+ input.
16 RF2/AN7/C1OUT bidirectional Digital I/O with Schmitt Trigger input; also A/D analog input channel 7 and Comparator 1 output.
17 RF1/AN6/C2OUT bidirectional Digital I/O with Schmitt Trigger input; also A/D analog input channel 6 and Comparator 2 output.
18 RF0/AN5 bidirectional Digital I/O with Schmitt Trigger input; also A/D analog input channel 5.
19 AVDD power_in Positive supply for analog modules.
20 AVSS power_in Ground reference for analog modules.
21 RA3/AN3/VREF+ bidirectional Digital I/O with TTL input; also A/D analog input channel 3 and A/D reference voltage (high) input VREF+.
22 RA2/AN2/VREF- bidirectional Digital I/O with TTL input; also A/D analog input channel 2 and A/D reference voltage (low) input VREF-.
23 RA1/AN1 bidirectional Digital I/O with TTL input; also A/D analog input channel 1.
24 RA0/AN0 bidirectional Digital I/O with TTL input; also A/D analog input channel 0.
25 VSS power_in Ground reference for logic and I/O pins.
26 VDD power_in Positive supply for logic and I/O pins.
27 RA5/AN4/HLVDIN bidirectional Digital I/O with TTL input; also A/D analog input channel 4 and High/Low-Voltage Detect input HLVDIN.
28 RA4/T0CKI bidirectional Digital I/O with Schmitt Trigger input; also Timer0 external clock input T0CKI.
29 RC1/T1OSI/ECCP2/P2A bidirectional Digital I/O with Schmitt Trigger input; also Timer1 oscillator input T1OSI and ECCP2 capture/compare/PWM output A.
30 RC0/T1OSO/T13CKI bidirectional Digital I/O with Schmitt Trigger input; also Timer1 oscillator output T1OSO and Timer1/Timer3 external clock input T13CKI.
31 RC6/TX1/CK1 bidirectional Digital I/O with Schmitt Trigger input; also EUSART1 asynchronous transmit (TX1) and synchronous clock (CK1).
32 RC7/RX1/DT1 bidirectional Digital I/O with Schmitt Trigger input; also EUSART1 asynchronous receive (RX1) and synchronous data (DT1).
33 RC2/ECCP1/P1A bidirectional Digital I/O with Schmitt Trigger input; also ECCP1 capture/compare/PWM output and ECCP1 PWM output A.
34 RC3/SCK1/SCL1 bidirectional Digital I/O with Schmitt Trigger input; also MSSP1 SPI clock (SCK1) and I2C clock (SCL1).
35 RC4/SDI1/SDA1 bidirectional Digital I/O with Schmitt Trigger input; also MSSP1 SPI data input (SDI1) and I2C data (SDA1).
36 RC5/SDO1 bidirectional Digital I/O with Schmitt Trigger input; also MSSP1 SPI data output (SDO1).
37 RB7/KBI3/PGD bidirectional Digital I/O with TTL input and weak pull-up; also interrupt-on-change KBI3 and ICSP/ICD programming data PGD.
38 VDD power_in Positive supply for logic and I/O pins.
39 OSC1/CLKI/RA7 input Oscillator crystal or external clock input (OSC1/CLKI); also digital I/O RA7 in modes where OSC1 is not used as oscillator.
40 OSC2/CLKO/RA6 output Oscillator crystal output or clock output (OSC2/CLKO, FOSC/4 in RC/EC modes); also digital I/O RA6 in modes where OSC2 is not used as oscillator.
41 VSS power_in Ground reference for logic and I/O pins.
42 RB6/KBI2/PGC bidirectional Digital I/O with TTL input and weak pull-up; also interrupt-on-change KBI2 and ICSP/ICD programming clock PGC.
43 RB5/KBI1/PGM bidirectional Digital I/O with TTL input and weak pull-up; also interrupt-on-change KBI1 and low-voltage ICSP programming enable PGM.
44 RB4/KBI0 bidirectional Digital I/O with TTL input and weak pull-up; also interrupt-on-change KBI0.
45 RB3/INT3 bidirectional Digital I/O with TTL input and weak pull-up; also external interrupt 3 (INT3).
46 RB2/INT2 bidirectional Digital I/O with TTL input and weak pull-up; also external interrupt 2 (INT2).
47 RB1/INT1 bidirectional Digital I/O with TTL input and weak pull-up; also external interrupt 1 (INT1).
48 RB0/INT0/FLT0 bidirectional Digital I/O with TTL input and weak pull-up; also external interrupt 0 (INT0) and PWM Fault input FLT0 for ECCPx.
49 RD7/PSP7/SS2 bidirectional Digital I/O with Schmitt Trigger input; also Parallel Slave Port data bit 7 and SPI slave select input for MSSP2.
50 RD6/PSP6/SCK2/SCL2 bidirectional Digital I/O with Schmitt Trigger input; also Parallel Slave Port data bit 6 and MSSP2 SPI clock (SCK2) / I2C clock (SCL2).
51 RD5/PSP5/SDI2/SDA2 bidirectional Digital I/O with Schmitt Trigger input; also Parallel Slave Port data bit 5 and MSSP2 SPI data input (SDI2) / I2C data (SDA2).
52 RD4/PSP4/SDO2 bidirectional Digital I/O with Schmitt Trigger input; also Parallel Slave Port data bit 4 and MSSP2 SPI data output (SDO2).
53 RD3/PSP3 bidirectional Digital I/O with Schmitt Trigger input; also Parallel Slave Port data bit 3.
54 RD2/PSP2 bidirectional Digital I/O with Schmitt Trigger input; also Parallel Slave Port data bit 2.
55 RD1/PSP1 bidirectional Digital I/O with Schmitt Trigger input; also Parallel Slave Port data bit 1.
56 VSS power_in Ground reference for logic and I/O pins.
57 VDD power_in Positive supply for logic and I/O pins.
58 RD0/PSP0 bidirectional Digital I/O with Schmitt Trigger input; also Parallel Slave Port data bit 0.
59 RE7/ECCP2/P2A bidirectional Digital I/O with Schmitt Trigger input; also ECCP2 capture/compare output and ECCP2 PWM output A (alternate ECCP2 pin).
60 RE6/P1B bidirectional Digital I/O with Schmitt Trigger input; also ECCP1 Enhanced PWM output channel B.
61 RE5/P1C bidirectional Digital I/O with Schmitt Trigger input; also ECCP1 Enhanced PWM output channel C.
62 RE4/P3B bidirectional Digital I/O with Schmitt Trigger input; also ECCP3 Enhanced PWM output channel B.
63 RE3/P3C bidirectional Digital I/O with Schmitt Trigger input; also ECCP3 Enhanced PWM output channel C.
64 RE2/CS/P2B bidirectional Digital I/O with Schmitt Trigger input; also Parallel Slave Port chip select input (CS) and ECCP2 PWM output B.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package TQFP-64(10x10)
Category Single Chip Microcomputer/Microcontroller
Pins 64

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Operating VDD range (standard F device) VDD 4.2 5.5 V 11
Operating Frequency 40 MHz Printed as DC, 40 MHz 11
RC oscillator external resistor REXT REXT 3 100 kΩ RC oscillator mode, recommended values 35
RC oscillator external capacitor CEXT CEXT 20 300 pF RC oscillator mode, recommended values 35
MCLR pull-up resistor for POR 1 10 kΩ MCLR tied through resistor to VDD for power-on reset 53

CAD (KiCad official)

  • Symbol: PIC18F6527-I
  • Footprint: Package_QFP:TQFP-64_10x10mm_P0.5mm
  • 3D model: TQFP-64(10x10) (KiCad packages3D, STEP)
  • 3D model files: pic18f6527-i-etched.step / pic18f6527-i-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pic18f6527-i.step / pic18f6527-i.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (446 pp, sha256 3c49d4b5c2f54a31, retrieved 2026-11-02, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF