main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers pic18f6310-i: symbol repaired (body fitted to the names) · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
pic18f6310-i-etched.glb Publish 0.1.0 · Ray
pic18f6310-i-etched.step pic18f6310-i: factory component page (tier=mfr) · Ray
pic18f6310-i-hero.glb pic18f6310-i: hero GLB from the etched model (keeps the MPN mark) · Ray
pic18f6310-i-hero.overlay.json Publish 0.1.0 · Ray
pic18f6310-i.glb Publish 0.1.0 · Ray
pic18f6310-i.kicad_mod Publish 0.1.0 · Ray
pic18f6310-i.kicad_sym pic18f6310-i: symbol repaired (body fitted to the names) · Ray
pic18f6310-i.lbr pic18f6310-i: symbol repaired (body fitted to the names) · Ray
pic18f6310-i.step Publish 0.1.0 · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 64 pins · Ray

PIC18F6310-I

Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · TQFP-64(10x10)

PIC18F6310-I from Microchip Tech, in a TQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 RE1/WR bidirectional Digital I/O (PORTE bit 1) with Schmitt Trigger input; serves as the Parallel Slave Port write enable control input (WR, TTL).
2 RE0/RD bidirectional Digital I/O (PORTE bit 0) with Schmitt Trigger input; serves as the Parallel Slave Port read enable control input (RD, TTL).
3 RG0/CCP3 bidirectional Digital I/O (PORTG bit 0) with Schmitt Trigger input; alternately Capture 3 input / Compare 3 output / PWM3 output.
4 RG1/TX2/CK2 bidirectional Digital I/O (PORTG bit 1) with Schmitt Trigger input; alternately AUSART2 asynchronous transmit (TX2) or synchronous clock (CK2).
5 RG2/RX2/DT2 bidirectional Digital I/O (PORTG bit 2) with Schmitt Trigger input; alternately AUSART2 asynchronous receive (RX2) or synchronous data (DT2).
6 RG3 bidirectional Digital I/O (PORTG bit 3) with Schmitt Trigger input buffer.
7 RG5/MCLR/VPP input Input-only pin: active-low Master Clear (Reset) input when MCLRE is set, otherwise digital input RG5; also the programming voltage input (VPP).
8 RG4 bidirectional Digital I/O (PORTG bit 4) with Schmitt Trigger input buffer.
9 VSS power_in Ground reference for logic and I/O pins.
10 VDD power_in Positive supply for logic and I/O pins.
11 RF7/SS bidirectional Digital I/O (PORTF bit 7) with Schmitt Trigger input; SPI slave select input (SS) for the MSSP module (TTL).
12 RF6/AN11 bidirectional Digital I/O (PORTF bit 6); Analog Input 11 and Comparator C1- input.
13 RF5/AN10/CVREF bidirectional Digital I/O (PORTF bit 5); Analog Input 10 and Comparator C1+ input; comparator voltage reference output CVREF, which disables digital I/O when enabled.
14 RF4/AN9 bidirectional Digital I/O (PORTF bit 4); Analog Input 9 and Comparator C2- input.
15 RF3/AN8 bidirectional Digital I/O (PORTF bit 3); Analog Input 8 and Comparator C2+ input.
16 RF2/AN7/C1OUT bidirectional Digital I/O (PORTF bit 2); Analog Input 7; Comparator 1 output (C1OUT), which takes priority over port data.
17 RF1/AN6/C2OUT bidirectional Digital I/O (PORTF bit 1); Analog Input 6; Comparator 2 output (C2OUT), which takes priority over port data.
18 RF0/AN5 bidirectional Digital I/O (PORTF bit 0) with Schmitt Trigger input; Analog Input 5.
19 AVDD power_in Positive supply for analog modules; must always be connected regardless of whether the analog modules are used.
20 AVSS power_in Ground reference for analog modules; must always be connected regardless of whether the analog modules are used.
21 RA3/AN3/VREF+ bidirectional Digital I/O (PORTA bit 3); Analog Input 3; A/D reference voltage (high) input.
22 RA2/AN2/VREF- bidirectional Digital I/O (PORTA bit 2); Analog Input 2; A/D reference voltage (low) input.
23 RA1/AN1 bidirectional Digital I/O (PORTA bit 1); Analog Input 1.
24 RA0/AN0 bidirectional Digital I/O (PORTA bit 0); Analog Input 0.
25 VSS power_in Ground reference for logic and I/O pins.
26 VDD power_in Positive supply for logic and I/O pins.
27 RA5/AN4/HLVDIN bidirectional Digital I/O (PORTA bit 5); Analog Input 4; High/Low-Voltage Detect external trip point input (HLVDIN).
28 RA4/T0CKI bidirectional Digital I/O (PORTA bit 4) with Schmitt Trigger input and open-drain output; Timer0 external clock input (T0CKI).
29 RC1/T1OSI/CCP2 bidirectional Digital I/O (PORTC bit 1) with Schmitt Trigger input; Timer1 oscillator input (T1OSI); CCP2 capture input / compare / PWM output (default CCP2 assignment when CCP2MX is set).
30 RC0/T1OSO/T13CKI bidirectional Digital I/O (PORTC bit 0) with Schmitt Trigger input; Timer1 oscillator output (T1OSO); Timer1/Timer3 external clock input (T13CKI).
31 RC6/TX1/CK1 bidirectional Digital I/O (PORTC bit 6) with Schmitt Trigger input; EUSART1 asynchronous transmit (TX1) or synchronous clock (CK1).
32 RC7/RX1/DT1 bidirectional Digital I/O (PORTC bit 7) with Schmitt Trigger input; EUSART1 asynchronous receive (RX1) or synchronous data (DT1).
33 RC2/CCP1 bidirectional Digital I/O (PORTC bit 2) with Schmitt Trigger input; Capture 1 input / Compare 1 output / PWM1 output.
34 RC3/SCK/SCL bidirectional Digital I/O (PORTC bit 3) with Schmitt Trigger input; MSSP SPI clock input/output (SCK) or I2C clock (SCL).
35 RC4/SDI/SDA bidirectional Digital I/O (PORTC bit 4) with Schmitt Trigger input; MSSP SPI data input (SDI) or I2C data I/O (SDA).
36 RC5/SDO bidirectional Digital I/O (PORTC bit 5) with Schmitt Trigger input; MSSP SPI data output (SDO).
37 RB7/KBI3/PGD bidirectional Digital I/O (PORTB bit 7) with weak pull-up when RBPU is cleared; interrupt-on-change pin KBI3; ICSP/ICD serial data pin PGD.
38 VDD power_in Positive supply for logic and I/O pins.
39 OSC1/CLKI/RA7 input Oscillator crystal or external clock input (OSC1/CLKI) with ST buffer in RC mode and CMOS otherwise; when not used as oscillator input, general-purpose I/O RA7.
40 OSC2/CLKO/RA6 output Oscillator crystal output (OSC2) connecting to the crystal/resonator, or CLKO (FOSC/4) in RC mode; when not used as oscillator, general-purpose I/O RA6.
41 VSS power_in Ground reference for logic and I/O pins.
42 RB6/KBI2/PGC bidirectional Digital I/O (PORTB bit 6) with Schmitt Trigger input and weak pull-up when RBPU is cleared; interrupt-on-change pin KBI2; ICSP/ICD programming clock PGC.
43 RB5/KBI1 bidirectional Digital I/O (PORTB bit 5) with weak pull-up when RBPU is cleared; interrupt-on-change pin KBI1.
44 RB4/KBI0 bidirectional Digital I/O (PORTB bit 4) with weak pull-up when RBPU is cleared; interrupt-on-change pin KBI0.
45 RB3/INT3 bidirectional Digital I/O (PORTB bit 3) with weak pull-up when RBPU is cleared; External Interrupt 3 (INT3).
46 RB2/INT2 bidirectional Digital I/O (PORTB bit 2) with weak pull-up when RBPU is cleared; External Interrupt 2 (INT2) with Schmitt Trigger input.
47 RB1/INT1 bidirectional Digital I/O (PORTB bit 1) with weak pull-up when RBPU is cleared; External Interrupt 1 (INT1) with Schmitt Trigger input.
48 RB0/INT0 bidirectional Digital I/O (PORTB bit 0) with weak pull-up when RBPU is cleared; External Interrupt 0 (INT0) with Schmitt Trigger input.
49 RD7/PSP7 bidirectional Digital I/O (PORTD bit 7) with Schmitt Trigger input; Parallel Slave Port data bit 7 (TTL).
50 RD6/PSP6 bidirectional Digital I/O (PORTD bit 6) with Schmitt Trigger input; Parallel Slave Port data bit 6 (TTL).
51 RD5/PSP5 bidirectional Digital I/O (PORTD bit 5) with Schmitt Trigger input; Parallel Slave Port data bit 5 (TTL).
52 RD4/PSP4 bidirectional Digital I/O (PORTD bit 4) with Schmitt Trigger input; Parallel Slave Port data bit 4 (TTL).
53 RD3/PSP3 bidirectional Digital I/O (PORTD bit 3) with Schmitt Trigger input; Parallel Slave Port data bit 3 (TTL).
54 RD2/PSP2 bidirectional Digital I/O (PORTD bit 2) with Schmitt Trigger input; Parallel Slave Port data bit 2 (TTL).
55 RD1/PSP1 bidirectional Digital I/O (PORTD bit 1) with Schmitt Trigger input; Parallel Slave Port data bit 1 (TTL).
56 VSS power_in Ground reference for logic and I/O pins.
57 VDD power_in Positive supply for logic and I/O pins.
58 RD0/PSP0 bidirectional Digital I/O (PORTD bit 0) with Schmitt Trigger input; Parallel Slave Port data bit 0 (TTL).
59 RE7/CCP2 bidirectional Digital I/O (PORTE bit 7) with Schmitt Trigger input; alternate CCP2 capture input / compare / PWM output when CCP2MX is cleared in Microcontroller mode.
60 RE6 bidirectional Digital I/O (PORTE bit 6) with Schmitt Trigger input buffer.
61 RE5 bidirectional Digital I/O (PORTE bit 5) with Schmitt Trigger input buffer.
62 RE4 bidirectional Digital I/O (PORTE bit 4) with Schmitt Trigger input buffer.
63 RE3 bidirectional Digital I/O (PORTE bit 3) with Schmitt Trigger input buffer.
64 RE2/CS bidirectional Digital I/O (PORTE bit 2) with Schmitt Trigger input; Parallel Slave Port chip select control input (CS, TTL).

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package TQFP-64(10x10)
Category Single Chip Microcomputer/Microcontroller
Pins 64

CAD (KiCad official)

  • Symbol: PIC18F6310-I
  • Footprint: Package_QFP:TQFP-64_10x10mm_P0.5mm
  • 3D model: TQFP-64(10x10) (KiCad packages3D, STEP)
  • 3D model files: pic18f6310-i-etched.step / pic18f6310-i-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pic18f6310-i.step / pic18f6310-i.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (412 pp, sha256 d256661b81c1a706, retrieved 2026-10-30, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF