main
Ray
Publish 0.1.2
f68d4d3
PIC18F4685-I
Microchip Tech · Pre-ordered MCUs · QFN-44-EP(8x8)
PIC18F4685-I from Microchip Tech, in a QFN-44-EP(8x8). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RC7/RX/DT | bidirectional | Digital I/O with Schmitt-trigger input; EUSART asynchronous receive input (RX) or synchronous data I/O (DT). |
| 2 | RD4/PSP4/ECCP1/P1A | bidirectional | Digital I/O with Schmitt-trigger input; Parallel Slave Port data, ECCP1 capture input/compare output, or ECCP1 enhanced PWM output channel A (P1A). |
| 3 | RD5/PSP5/P1B | bidirectional | Digital I/O with Schmitt-trigger input; Parallel Slave Port data or ECCP1 enhanced PWM output channel B (P1B). |
| 4 | RD6/PSP6/P1C | bidirectional | Digital I/O with Schmitt-trigger input; Parallel Slave Port data or ECCP1 enhanced PWM output channel C (P1C). |
| 5 | RD7/PSP7/P1D | bidirectional | Digital I/O with Schmitt-trigger input; Parallel Slave Port data or ECCP1 enhanced PWM output channel D (P1D). |
| 6 | VSS | power_in | Ground reference for logic and I/O pins. |
| 7 | VDD | power_in | Positive supply for logic and I/O pins. |
| 8 | VDD | power_in | Positive supply for logic and I/O pins. |
| 9 | RB0/INT0/FLT0/AN10 | bidirectional | Digital I/O with TTL input and weak pull-up; external interrupt 0 (INT0), ECCP1 PWM Fault input (FLT0), or analog input 10. |
| 10 | RB1/INT1/AN8 | bidirectional | Digital I/O with TTL input and weak pull-up; external interrupt 1 (INT1) or analog input 8. |
| 11 | RB2/INT2/CANTX | bidirectional | Digital I/O with TTL input and weak pull-up; external interrupt 2 (INT2) or CAN bus transmit output (CANTX). |
| 12 | RB3/CANRX | bidirectional | Digital I/O with TTL input and weak pull-up; CAN bus receive input (CANRX). |
| 13 | NC | unconnected | No connect. |
| 14 | RB4/KBI0/AN9 | bidirectional | Digital I/O with TTL input and weak pull-up; interrupt-on-pin-change KBI0 or analog input 9. |
| 15 | RB5/KBI1/PGM | bidirectional | Digital I/O with TTL input and weak pull-up; interrupt-on-pin-change KBI1 or low-voltage ICSP programming enable (PGM). |
| 16 | RB6/KBI2/PGC | bidirectional | Digital I/O with TTL input and weak pull-up; interrupt-on-pin-change KBI2 or in-circuit debugger and ICSP programming clock (PGC). |
| 17 | RB7/KBI3/PGD | bidirectional | Digital I/O with TTL input and weak pull-up; interrupt-on-pin-change KBI3 or in-circuit debugger and ICSP programming data (PGD). |
| 18 | MCLR/VPP/RE3 | input | Active-low master clear (Reset) input; also programming voltage input (VPP), or digital input RE3 when the MCLR function is disabled. |
| 19 | RA0/AN0/CVREF | bidirectional | Digital I/O with TTL input; analog input 0 or analog comparator reference output (CVREF). |
| 20 | RA1/AN1 | bidirectional | Digital I/O with TTL input; analog input 1. |
| 21 | RA2/AN2/VREF- | bidirectional | Digital I/O with TTL input; analog input 2 or A/D reference voltage (low) input (VREF-). |
| 22 | RA3/AN3/VREF+ | bidirectional | Digital I/O with TTL input; analog input 3 or A/D reference voltage (high) input (VREF+). |
| 23 | RA4/T0CKI | bidirectional | Digital I/O with TTL input; Timer0 external clock input (T0CKI, Schmitt trigger). |
| 24 | RA5/AN4/SS/HLVDIN | bidirectional | Digital I/O with TTL input; analog input 4, SPI slave select input (SS), or High/Low-Voltage Detect external input (HLVDIN). |
| 25 | RE0/RD/AN5 | bidirectional | Digital I/O with Schmitt-trigger input; Parallel Slave Port read enable input (RD) or analog input 5. |
| 26 | RE1/WR/AN6/C1OUT | bidirectional | Digital I/O with Schmitt-trigger input; Parallel Slave Port write enable input (WR), analog input 6, or Comparator 1 output (C1OUT). |
| 27 | RE2/CS/AN7/C2OUT | bidirectional | Digital I/O with Schmitt-trigger input; Parallel Slave Port chip select input (CS), analog input 7, or Comparator 2 output (C2OUT). |
| 28 | VDD | power_in | Positive supply for logic and I/O pins. |
| 29 | VDD | power_in | Positive supply for logic and I/O pins. |
| 30 | VSS | power_in | Ground reference for logic and I/O pins. |
| 31 | VSS | power_in | Ground reference for logic and I/O pins. |
| 32 | OSC1/CLKI/RA7 | input | Oscillator crystal or external clock source input (CMOS, ST in RC mode); becomes digital I/O RA7 when OSC1 is not used by the selected oscillator mode. |
| 33 | OSC2/CLKO/RA6 | bidirectional | Oscillator crystal output, or CLKO (FOSC/4) in RC mode; otherwise general purpose I/O RA6 when OSC2 is not used by the selected oscillator mode. |
| 34 | RC0/T1OSO/T13CKI | bidirectional | Digital I/O with Schmitt-trigger input; Timer1 oscillator output (T1OSO) or Timer1/Timer3 external clock input (T13CKI). |
| 35 | RC1/T1OSI | bidirectional | Digital I/O with Schmitt-trigger input; Timer1 oscillator input (T1OSI). |
| 36 | RC2/CCP1 | bidirectional | Digital I/O with Schmitt-trigger input; CCP1 capture input or CCP1 compare/PWM output. |
| 37 | RC3/SCK/SCL | bidirectional | Digital I/O with Schmitt-trigger input; MSSP serial clock I/O for SPI mode (SCK) or I2C/SMBus mode (SCL). |
| 38 | RD0/PSP0/C1IN+ | bidirectional | Digital I/O with Schmitt-trigger input; Parallel Slave Port data or Comparator 1 positive input (C1IN+). |
| 39 | RD1/PSP1/C1IN- | bidirectional | Digital I/O with Schmitt-trigger input; Parallel Slave Port data or Comparator 1 negative input (C1IN-). |
| 40 | RD2/PSP2/C2IN+ | bidirectional | Digital I/O with Schmitt-trigger input; Parallel Slave Port data or Comparator 2 positive input (C2IN+). |
| 41 | RD3/PSP3/C2IN- | bidirectional | Digital I/O with Schmitt-trigger input; Parallel Slave Port data or Comparator 2 negative input (C2IN-). |
| 42 | RC4/SDI/SDA | bidirectional | Digital I/O with Schmitt-trigger input; MSSP SPI data input (SDI) or I2C/SMBus data I/O (SDA). |
| 43 | RC5/SDO | bidirectional | Digital I/O with Schmitt-trigger input; MSSP SPI data output (SDO). |
| 44 | RC6/TX/CK | bidirectional | Digital I/O with Schmitt-trigger input; EUSART asynchronous transmit output (TX) or synchronous clock I/O (CK). |
| 45 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | QFN-44-EP(8x8) |
| Category | Embedded Processors & Controllers |
| Pins | 45 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| HLVD Voltage on VDD Transition High-to-Low (D420), HLVDL<3:0>=0000 trip point | 2.12 | 2.17 | 2.22 | V | HLVDL<3:0> = 0000 | 434 | |
| HLVD Voltage on VDD Transition High-to-Low (D420), HLVDL<3:0>=0001 trip point | 2.18 | 2.23 | 2.28 | V | HLVDL<3:0> = 0001 | 434 | |
| HLVD Voltage on VDD Transition High-to-Low (D420), HLVDL<3:0>=0010 trip point | 2.31 | 2.36 | 2.42 | V | HLVDL<3:0> = 0010 | 434 | |
| HLVD Voltage on VDD Transition High-to-Low (D420), HLVDL<3:0>=0011 trip point | 2.38 | 2.44 | 2.49 | V | HLVDL<3:0> = 0011 | 434 | |
| HLVD Voltage on VDD Transition High-to-Low (D420), HLVDL<3:0>=0100 trip point | 2.54 | 2.6 | 2.66 | V | HLVDL<3:0> = 0100 | 434 | |
| HLVD Voltage on VDD Transition High-to-Low (D420), HLVDL<3:0>=0101 trip point | 2.72 | 2.79 | 2.85 | V | HLVDL<3:0> = 0101 | 434 | |
| HLVD Voltage on VDD Transition High-to-Low (D420), HLVDL<3:0>=0110 trip point | 2.82 | 2.89 | 2.95 | V | HLVDL<3:0> = 0110 | 434 | |
| HLVD Voltage on VDD Transition High-to-Low (D420), HLVDL<3:0>=0111 trip point | 3.05 | 3.12 | 3.19 | V | HLVDL<3:0> = 0111 | 434 | |
| HLVD Voltage on VDD Transition High-to-Low (D420), HLVDL<3:0>=1000 trip point | 3.31 | 3.39 | 3.47 | V | HLVDL<3:0> = 1000 | 434 | |
| HLVD Voltage on VDD Transition High-to-Low (D420), HLVDL<3:0>=1001 trip point | 3.46 | 3.55 | 3.63 | V | HLVDL<3:0> = 1001 | 434 | |
| HLVD Voltage on VDD Transition High-to-Low (D420), HLVDL<3:0>=1010 trip point | 3.63 | 3.71 | 3.8 | V | HLVDL<3:0> = 1010 | 434 | |
| HLVD Voltage on VDD Transition High-to-Low (D420), HLVDL<3:0>=1011 trip point | 3.81 | 3.9 | 3.99 | V | HLVDL<3:0> = 1011 | 434 | |
| HLVD Voltage on VDD Transition High-to-Low (D420), HLVDL<3:0>=1100 trip point | 4.01 | 4.11 | 4.2 | V | HLVDL<3:0> = 1100 | 434 | |
| HLVD Voltage on VDD Transition High-to-Low (D420), HLVDL<3:0>=1101 trip point | 4.23 | 4.33 | 4.43 | V | HLVDL<3:0> = 1101 | 434 | |
| HLVD Voltage on VDD Transition High-to-Low (D420), HLVDL<3:0>=1110 trip point | 4.48 | 4.59 | 4.69 | V | HLVDL<3:0> = 1110 | 434 | |
| HLVD Voltage on VDD Transition High-to-Low (D420), HLVDL<3:0>=1111 external HLVDIN input trip point | 1.14 | 1.2 | 1.26 | V | HLVDL<3:0> = 1111 | 434 | |
| Supply voltage VDD, PIC18F (standard voltage range) device | VDD | 4.2 | 5.5 | V | PIC18F4685 standard voltage range (ordering information) | 483 | |
| Operating temperature range, industrial | TA | -40 | 85 | °C | Industrial (-I) grade, Standard Operating Conditions for Table 27-4 | 434 | |
| Maximum recommended analog source impedance for A/D input | Rs | 2.5 | kΩ | 254 | |||
| RC oscillator external resistor REXT (recommended range) | REXT | 3 | 100 | kΩ | RC/RCIO oscillator mode, CEXT > 20 pF | 27 |
CAD (KiCad official)
- Symbol:
PIC18F4685-I - Footprint:
Package_DFN_QFN:QFN-44-1EP_8x8mm_P0.65mm_EP6.45x6.45mm - 3D model: QFN-44-EP(8x8) (KiCad packages3D, STEP)
- 3D model files:
pic18f4685-i-ml-etched.step/pic18f4685-i-ml-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic18f4685-i-ml.step/pic18f4685-i-ml.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (484 pp, sha256
2430cb8c5a6c7676, retrieved 2026-11-20) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# PIC18F4685-I
**Microchip Tech** · Pre-ordered MCUs · QFN-44-EP(8x8)
PIC18F4685-I from Microchip Tech, in a QFN-44-EP(8x8). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RC7/RX/DT | bidirectional | Digital I/O with Schmitt-trigger input; EUSART asynchronous receive input (RX) or synchronous data I/O (DT). |
| 2 | RD4/PSP4/ECCP1/P1A | bidirectional | Digital I/O with Schmitt-trigger input; Parallel Slave Port data, ECCP1 capture input/compare output, or ECCP1 enhanced PWM output channel A (P1A). |
| 3 | RD5/PSP5/P1B | bidirectional | Digital I/O with Schmitt-trigger input; Parallel Slave Port data or ECCP1 enhanced PWM output channel B (P1B). |
| 4 | RD6/PSP6/P1C | bidirectional | Digital I/O with Schmitt-trigger input; Parallel Slave Port data or ECCP1 enhanced PWM output channel C (P1C). |
| 5 | RD7/PSP7/P1D | bidirectional | Digital I/O with Schmitt-trigger input; Parallel Slave Port data or ECCP1 enhanced PWM output channel D (P1D). |
| 6 | VSS | power_in | Ground reference for logic and I/O pins. |
| 7 | VDD | power_in | Positive supply for logic and I/O pins. |
| 8 | VDD | power_in | Positive supply for logic and I/O pins. |
| 9 | RB0/INT0/FLT0/AN10 | bidirectional | Digital I/O with TTL input and weak pull-up; external interrupt 0 (INT0), ECCP1 PWM Fault input (FLT0), or analog input 10. |
| 10 | RB1/INT1/AN8 | bidirectional | Digital I/O with TTL input and weak pull-up; external interrupt 1 (INT1) or analog input 8. |
| 11 | RB2/INT2/CANTX | bidirectional | Digital I/O with TTL input and weak pull-up; external interrupt 2 (INT2) or CAN bus transmit output (CANTX). |
| 12 | RB3/CANRX | bidirectional | Digital I/O with TTL input and weak pull-up; CAN bus receive input (CANRX). |
| 13 | NC | unconnected | No connect. |
| 14 | RB4/KBI0/AN9 | bidirectional | Digital I/O with TTL input and weak pull-up; interrupt-on-pin-change KBI0 or analog input 9. |
| 15 | RB5/KBI1/PGM | bidirectional | Digital I/O with TTL input and weak pull-up; interrupt-on-pin-change KBI1 or low-voltage ICSP programming enable (PGM). |
| 16 | RB6/KBI2/PGC | bidirectional | Digital I/O with TTL input and weak pull-up; interrupt-on-pin-change KBI2 or in-circuit debugger and ICSP programming clock (PGC). |
| 17 | RB7/KBI3/PGD | bidirectional | Digital I/O with TTL input and weak pull-up; interrupt-on-pin-change KBI3 or in-circuit debugger and ICSP programming data (PGD). |
| 18 | MCLR/VPP/RE3 | input | Active-low master clear (Reset) input; also programming voltage input (VPP), or digital input RE3 when the MCLR function is disabled. |
| 19 | RA0/AN0/CVREF | bidirectional | Digital I/O with TTL input; analog input 0 or analog comparator reference output (CVREF). |
| 20 | RA1/AN1 | bidirectional | Digital I/O with TTL input; analog input 1. |
| 21 | RA2/AN2/VREF- | bidirectional | Digital I/O with TTL input; analog input 2 or A/D reference voltage (low) input (VREF-). |
| 22 | RA3/AN3/VREF+ | bidirectional | Digital I/O with TTL input; analog input 3 or A/D reference voltage (high) input (VREF+). |
| 23 | RA4/T0CKI | bidirectional | Digital I/O with TTL input; Timer0 external clock input (T0CKI, Schmitt trigger). |
| 24 | RA5/AN4/SS/HLVDIN | bidirectional | Digital I/O with TTL input; analog input 4, SPI slave select input (SS), or High/Low-Voltage Detect external input (HLVDIN). |
| 25 | RE0/RD/AN5 | bidirectional | Digital I/O with Schmitt-trigger input; Parallel Slave Port read enable input (RD) or analog input 5. |
| 26 | RE1/WR/AN6/C1OUT | bidirectional | Digital I/O with Schmitt-trigger input; Parallel Slave Port write enable input (WR), analog input 6, or Comparator 1 output (C1OUT). |
| 27 | RE2/CS/AN7/C2OUT | bidirectional | Digital I/O with Schmitt-trigger input; Parallel Slave Port chip select input (CS), analog input 7, or Comparator 2 output (C2OUT). |
| 28 | VDD | power_in | Positive supply for logic and I/O pins. |
| 29 | VDD | power_in | Positive supply for logic and I/O pins. |
| 30 | VSS | power_in | Ground reference for logic and I/O pins. |
| 31 | VSS | power_in | Ground reference for logic and I/O pins. |
| 32 | OSC1/CLKI/RA7 | input | Oscillator crystal or external clock source input (CMOS, ST in RC mode); becomes digital I/O RA7 when OSC1 is not used by the selected oscillator mode. |
| 33 | OSC2/CLKO/RA6 | bidirectional | Oscillator crystal output, or CLKO (FOSC/4) in RC mode; otherwise general purpose I/O RA6 when OSC2 is not used by the selected oscillator mode. |
| 34 | RC0/T1OSO/T13CKI | bidirectional | Digital I/O with Schmitt-trigger input; Timer1 oscillator output (T1OSO) or Timer1/Timer3 external clock input (T13CKI). |
| 35 | RC1/T1OSI | bidirectional | Digital I/O with Schmitt-trigger input; Timer1 oscillator input (T1OSI). |
| 36 | RC2/CCP1 | bidirectional | Digital I/O with Schmitt-trigger input; CCP1 capture input or CCP1 compare/PWM output. |
| 37 | RC3/SCK/SCL | bidirectional | Digital I/O with Schmitt-trigger input; MSSP serial clock I/O for SPI mode (SCK) or I2C/SMBus mode (SCL). |
| 38 | RD0/PSP0/C1IN+ | bidirectional | Digital I/O with Schmitt-trigger input; Parallel Slave Port data or Comparator 1 positive input (C1IN+). |
| 39 | RD1/PSP1/C1IN- | bidirectional | Digital I/O with Schmitt-trigger input; Parallel Slave Port data or Comparator 1 negative input (C1IN-). |
| 40 | RD2/PSP2/C2IN+ | bidirectional | Digital I/O with Schmitt-trigger input; Parallel Slave Port data or Comparator 2 positive input (C2IN+). |
| 41 | RD3/PSP3/C2IN- | bidirectional | Digital I/O with Schmitt-trigger input; Parallel Slave Port data or Comparator 2 negative input (C2IN-). |
| 42 | RC4/SDI/SDA | bidirectional | Digital I/O with Schmitt-trigger input; MSSP SPI data input (SDI) or I2C/SMBus data I/O (SDA). |
| 43 | RC5/SDO | bidirectional | Digital I/O with Schmitt-trigger input; MSSP SPI data output (SDO). |
| 44 | RC6/TX/CK | bidirectional | Digital I/O with Schmitt-trigger input; EUSART asynchronous transmit output (TX) or synchronous clock I/O (CK). |
| 45 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | QFN-44-EP(8x8) |
| Category | Embedded Processors & Controllers |
| Pins | 45 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| HLVD Voltage on VDD Transition High-to-Low (D420), HLVDL<3:0>=0000 trip point | | 2.12 | 2.17 | 2.22 | V | HLVDL<3:0> = 0000 | 434 |
| HLVD Voltage on VDD Transition High-to-Low (D420), HLVDL<3:0>=0001 trip point | | 2.18 | 2.23 | 2.28 | V | HLVDL<3:0> = 0001 | 434 |
| HLVD Voltage on VDD Transition High-to-Low (D420), HLVDL<3:0>=0010 trip point | | 2.31 | 2.36 | 2.42 | V | HLVDL<3:0> = 0010 | 434 |
| HLVD Voltage on VDD Transition High-to-Low (D420), HLVDL<3:0>=0011 trip point | | 2.38 | 2.44 | 2.49 | V | HLVDL<3:0> = 0011 | 434 |
| HLVD Voltage on VDD Transition High-to-Low (D420), HLVDL<3:0>=0100 trip point | | 2.54 | 2.6 | 2.66 | V | HLVDL<3:0> = 0100 | 434 |
| HLVD Voltage on VDD Transition High-to-Low (D420), HLVDL<3:0>=0101 trip point | | 2.72 | 2.79 | 2.85 | V | HLVDL<3:0> = 0101 | 434 |
| HLVD Voltage on VDD Transition High-to-Low (D420), HLVDL<3:0>=0110 trip point | | 2.82 | 2.89 | 2.95 | V | HLVDL<3:0> = 0110 | 434 |
| HLVD Voltage on VDD Transition High-to-Low (D420), HLVDL<3:0>=0111 trip point | | 3.05 | 3.12 | 3.19 | V | HLVDL<3:0> = 0111 | 434 |
| HLVD Voltage on VDD Transition High-to-Low (D420), HLVDL<3:0>=1000 trip point | | 3.31 | 3.39 | 3.47 | V | HLVDL<3:0> = 1000 | 434 |
| HLVD Voltage on VDD Transition High-to-Low (D420), HLVDL<3:0>=1001 trip point | | 3.46 | 3.55 | 3.63 | V | HLVDL<3:0> = 1001 | 434 |
| HLVD Voltage on VDD Transition High-to-Low (D420), HLVDL<3:0>=1010 trip point | | 3.63 | 3.71 | 3.8 | V | HLVDL<3:0> = 1010 | 434 |
| HLVD Voltage on VDD Transition High-to-Low (D420), HLVDL<3:0>=1011 trip point | | 3.81 | 3.9 | 3.99 | V | HLVDL<3:0> = 1011 | 434 |
| HLVD Voltage on VDD Transition High-to-Low (D420), HLVDL<3:0>=1100 trip point | | 4.01 | 4.11 | 4.2 | V | HLVDL<3:0> = 1100 | 434 |
| HLVD Voltage on VDD Transition High-to-Low (D420), HLVDL<3:0>=1101 trip point | | 4.23 | 4.33 | 4.43 | V | HLVDL<3:0> = 1101 | 434 |
| HLVD Voltage on VDD Transition High-to-Low (D420), HLVDL<3:0>=1110 trip point | | 4.48 | 4.59 | 4.69 | V | HLVDL<3:0> = 1110 | 434 |
| HLVD Voltage on VDD Transition High-to-Low (D420), HLVDL<3:0>=1111 external HLVDIN input trip point | | 1.14 | 1.2 | 1.26 | V | HLVDL<3:0> = 1111 | 434 |
| Supply voltage VDD, PIC18F (standard voltage range) device | VDD | 4.2 | | 5.5 | V | PIC18F4685 standard voltage range (ordering information) | 483 |
| Operating temperature range, industrial | TA | -40 | | 85 | °C | Industrial (-I) grade, Standard Operating Conditions for Table 27-4 | 434 |
| Maximum recommended analog source impedance for A/D input | Rs | | | 2.5 | kΩ | | 254 |
| RC oscillator external resistor REXT (recommended range) | REXT | 3 | | 100 | kΩ | RC/RCIO oscillator mode, CEXT > 20 pF | 27 |
## CAD (KiCad official)
- Symbol: `PIC18F4685-I`
- Footprint: `Package_DFN_QFN:QFN-44-1EP_8x8mm_P0.65mm_EP6.45x6.45mm`
- 3D model: QFN-44-EP(8x8) (KiCad packages3D, STEP)
- 3D model files: `pic18f4685-i-ml-etched.step` / `pic18f4685-i-ml-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `pic18f4685-i-ml.step` / `pic18f4685-i-ml.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Microchip Tech datasheet](https://ww1.microchip.com/downloads/aemDocuments/documents/OTH/ProductDocuments/DataSheets/39761c.pdf) (484 pp, sha256 `2430cb8c5a6c7676`, retrieved 2026-11-20)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/pic18f4685-i-ml-datasheet.pdf)