Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

PIC18F4685-I

Microchip Tech · Pre-ordered MCUs · QFN-44-EP(8x8)

PIC18F4685-I from Microchip Tech, in a QFN-44-EP(8x8). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 RC7/RX/DT bidirectional Digital I/O with Schmitt-trigger input; EUSART asynchronous receive input (RX) or synchronous data I/O (DT).
2 RD4/PSP4/ECCP1/P1A bidirectional Digital I/O with Schmitt-trigger input; Parallel Slave Port data, ECCP1 capture input/compare output, or ECCP1 enhanced PWM output channel A (P1A).
3 RD5/PSP5/P1B bidirectional Digital I/O with Schmitt-trigger input; Parallel Slave Port data or ECCP1 enhanced PWM output channel B (P1B).
4 RD6/PSP6/P1C bidirectional Digital I/O with Schmitt-trigger input; Parallel Slave Port data or ECCP1 enhanced PWM output channel C (P1C).
5 RD7/PSP7/P1D bidirectional Digital I/O with Schmitt-trigger input; Parallel Slave Port data or ECCP1 enhanced PWM output channel D (P1D).
6 VSS power_in Ground reference for logic and I/O pins.
7 VDD power_in Positive supply for logic and I/O pins.
8 VDD power_in Positive supply for logic and I/O pins.
9 RB0/INT0/FLT0/AN10 bidirectional Digital I/O with TTL input and weak pull-up; external interrupt 0 (INT0), ECCP1 PWM Fault input (FLT0), or analog input 10.
10 RB1/INT1/AN8 bidirectional Digital I/O with TTL input and weak pull-up; external interrupt 1 (INT1) or analog input 8.
11 RB2/INT2/CANTX bidirectional Digital I/O with TTL input and weak pull-up; external interrupt 2 (INT2) or CAN bus transmit output (CANTX).
12 RB3/CANRX bidirectional Digital I/O with TTL input and weak pull-up; CAN bus receive input (CANRX).
13 NC unconnected No connect.
14 RB4/KBI0/AN9 bidirectional Digital I/O with TTL input and weak pull-up; interrupt-on-pin-change KBI0 or analog input 9.
15 RB5/KBI1/PGM bidirectional Digital I/O with TTL input and weak pull-up; interrupt-on-pin-change KBI1 or low-voltage ICSP programming enable (PGM).
16 RB6/KBI2/PGC bidirectional Digital I/O with TTL input and weak pull-up; interrupt-on-pin-change KBI2 or in-circuit debugger and ICSP programming clock (PGC).
17 RB7/KBI3/PGD bidirectional Digital I/O with TTL input and weak pull-up; interrupt-on-pin-change KBI3 or in-circuit debugger and ICSP programming data (PGD).
18 MCLR/VPP/RE3 input Active-low master clear (Reset) input; also programming voltage input (VPP), or digital input RE3 when the MCLR function is disabled.
19 RA0/AN0/CVREF bidirectional Digital I/O with TTL input; analog input 0 or analog comparator reference output (CVREF).
20 RA1/AN1 bidirectional Digital I/O with TTL input; analog input 1.
21 RA2/AN2/VREF- bidirectional Digital I/O with TTL input; analog input 2 or A/D reference voltage (low) input (VREF-).
22 RA3/AN3/VREF+ bidirectional Digital I/O with TTL input; analog input 3 or A/D reference voltage (high) input (VREF+).
23 RA4/T0CKI bidirectional Digital I/O with TTL input; Timer0 external clock input (T0CKI, Schmitt trigger).
24 RA5/AN4/SS/HLVDIN bidirectional Digital I/O with TTL input; analog input 4, SPI slave select input (SS), or High/Low-Voltage Detect external input (HLVDIN).
25 RE0/RD/AN5 bidirectional Digital I/O with Schmitt-trigger input; Parallel Slave Port read enable input (RD) or analog input 5.
26 RE1/WR/AN6/C1OUT bidirectional Digital I/O with Schmitt-trigger input; Parallel Slave Port write enable input (WR), analog input 6, or Comparator 1 output (C1OUT).
27 RE2/CS/AN7/C2OUT bidirectional Digital I/O with Schmitt-trigger input; Parallel Slave Port chip select input (CS), analog input 7, or Comparator 2 output (C2OUT).
28 VDD power_in Positive supply for logic and I/O pins.
29 VDD power_in Positive supply for logic and I/O pins.
30 VSS power_in Ground reference for logic and I/O pins.
31 VSS power_in Ground reference for logic and I/O pins.
32 OSC1/CLKI/RA7 input Oscillator crystal or external clock source input (CMOS, ST in RC mode); becomes digital I/O RA7 when OSC1 is not used by the selected oscillator mode.
33 OSC2/CLKO/RA6 bidirectional Oscillator crystal output, or CLKO (FOSC/4) in RC mode; otherwise general purpose I/O RA6 when OSC2 is not used by the selected oscillator mode.
34 RC0/T1OSO/T13CKI bidirectional Digital I/O with Schmitt-trigger input; Timer1 oscillator output (T1OSO) or Timer1/Timer3 external clock input (T13CKI).
35 RC1/T1OSI bidirectional Digital I/O with Schmitt-trigger input; Timer1 oscillator input (T1OSI).
36 RC2/CCP1 bidirectional Digital I/O with Schmitt-trigger input; CCP1 capture input or CCP1 compare/PWM output.
37 RC3/SCK/SCL bidirectional Digital I/O with Schmitt-trigger input; MSSP serial clock I/O for SPI mode (SCK) or I2C/SMBus mode (SCL).
38 RD0/PSP0/C1IN+ bidirectional Digital I/O with Schmitt-trigger input; Parallel Slave Port data or Comparator 1 positive input (C1IN+).
39 RD1/PSP1/C1IN- bidirectional Digital I/O with Schmitt-trigger input; Parallel Slave Port data or Comparator 1 negative input (C1IN-).
40 RD2/PSP2/C2IN+ bidirectional Digital I/O with Schmitt-trigger input; Parallel Slave Port data or Comparator 2 positive input (C2IN+).
41 RD3/PSP3/C2IN- bidirectional Digital I/O with Schmitt-trigger input; Parallel Slave Port data or Comparator 2 negative input (C2IN-).
42 RC4/SDI/SDA bidirectional Digital I/O with Schmitt-trigger input; MSSP SPI data input (SDI) or I2C/SMBus data I/O (SDA).
43 RC5/SDO bidirectional Digital I/O with Schmitt-trigger input; MSSP SPI data output (SDO).
44 RC6/TX/CK bidirectional Digital I/O with Schmitt-trigger input; EUSART asynchronous transmit output (TX) or synchronous clock I/O (CK).
45 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package QFN-44-EP(8x8)
Category Embedded Processors & Controllers
Pins 45

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
HLVD Voltage on VDD Transition High-to-Low (D420), HLVDL<3:0>=0000 trip point 2.12 2.17 2.22 V HLVDL<3:0> = 0000 434
HLVD Voltage on VDD Transition High-to-Low (D420), HLVDL<3:0>=0001 trip point 2.18 2.23 2.28 V HLVDL<3:0> = 0001 434
HLVD Voltage on VDD Transition High-to-Low (D420), HLVDL<3:0>=0010 trip point 2.31 2.36 2.42 V HLVDL<3:0> = 0010 434
HLVD Voltage on VDD Transition High-to-Low (D420), HLVDL<3:0>=0011 trip point 2.38 2.44 2.49 V HLVDL<3:0> = 0011 434
HLVD Voltage on VDD Transition High-to-Low (D420), HLVDL<3:0>=0100 trip point 2.54 2.6 2.66 V HLVDL<3:0> = 0100 434
HLVD Voltage on VDD Transition High-to-Low (D420), HLVDL<3:0>=0101 trip point 2.72 2.79 2.85 V HLVDL<3:0> = 0101 434
HLVD Voltage on VDD Transition High-to-Low (D420), HLVDL<3:0>=0110 trip point 2.82 2.89 2.95 V HLVDL<3:0> = 0110 434
HLVD Voltage on VDD Transition High-to-Low (D420), HLVDL<3:0>=0111 trip point 3.05 3.12 3.19 V HLVDL<3:0> = 0111 434
HLVD Voltage on VDD Transition High-to-Low (D420), HLVDL<3:0>=1000 trip point 3.31 3.39 3.47 V HLVDL<3:0> = 1000 434
HLVD Voltage on VDD Transition High-to-Low (D420), HLVDL<3:0>=1001 trip point 3.46 3.55 3.63 V HLVDL<3:0> = 1001 434
HLVD Voltage on VDD Transition High-to-Low (D420), HLVDL<3:0>=1010 trip point 3.63 3.71 3.8 V HLVDL<3:0> = 1010 434
HLVD Voltage on VDD Transition High-to-Low (D420), HLVDL<3:0>=1011 trip point 3.81 3.9 3.99 V HLVDL<3:0> = 1011 434
HLVD Voltage on VDD Transition High-to-Low (D420), HLVDL<3:0>=1100 trip point 4.01 4.11 4.2 V HLVDL<3:0> = 1100 434
HLVD Voltage on VDD Transition High-to-Low (D420), HLVDL<3:0>=1101 trip point 4.23 4.33 4.43 V HLVDL<3:0> = 1101 434
HLVD Voltage on VDD Transition High-to-Low (D420), HLVDL<3:0>=1110 trip point 4.48 4.59 4.69 V HLVDL<3:0> = 1110 434
HLVD Voltage on VDD Transition High-to-Low (D420), HLVDL<3:0>=1111 external HLVDIN input trip point 1.14 1.2 1.26 V HLVDL<3:0> = 1111 434
Supply voltage VDD, PIC18F (standard voltage range) device VDD 4.2 5.5 V PIC18F4685 standard voltage range (ordering information) 483
Operating temperature range, industrial TA -40 85 °C Industrial (-I) grade, Standard Operating Conditions for Table 27-4 434
Maximum recommended analog source impedance for A/D input Rs 2.5 kΩ 254
RC oscillator external resistor REXT (recommended range) REXT 3 100 kΩ RC/RCIO oscillator mode, CEXT > 20 pF 27

CAD (KiCad official)

  • Symbol: PIC18F4685-I
  • Footprint: Package_DFN_QFN:QFN-44-1EP_8x8mm_P0.65mm_EP6.45x6.45mm
  • 3D model: QFN-44-EP(8x8) (KiCad packages3D, STEP)
  • 3D model files: pic18f4685-i-ml-etched.step / pic18f4685-i-ml-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pic18f4685-i-ml.step / pic18f4685-i-ml.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (484 pp, sha256 2430cb8c5a6c7676, retrieved 2026-11-20)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF