component
PIC18F4585-E/PT
Public Made by Adomby adom
Microchip Tech Microcontroller Units (MCUs/MPUs/SOCs), TQFP-44(10x10). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
Ray
Publish 0.1.0
5af8e91
PIC18F4585-E
Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · TQFP-44(10x10)
PIC18F4585-E from Microchip Tech, in a TQFP-44(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RC7/RX/DT | bidirectional | Digital I/O with Schmitt Trigger input; EUSART asynchronous receive (RX) or synchronous data (DT). |
| 2 | RD4/PSP4/ECCP1/P1A | bidirectional | Digital I/O with Schmitt Trigger input; also Parallel Slave Port data bit 4 (TTL input when PSP is enabled), ECCP1 capture/compare, and ECCP1 PWM output P1A. |
| 3 | RD5/PSP5/P1B | bidirectional | Digital I/O with Schmitt Trigger input; also Parallel Slave Port data bit 5 and ECCP1 PWM output P1B. |
| 4 | RD6/PSP6/P1C | bidirectional | Digital I/O with Schmitt Trigger input; also Parallel Slave Port data bit 6 and ECCP1 PWM output P1C. |
| 5 | RD7/PSP7/P1D | bidirectional | Digital I/O with Schmitt Trigger input; also Parallel Slave Port data bit 7 and ECCP1 PWM output P1D. |
| 6 | VSS | power_in | Ground reference for logic and I/O pins. |
| 7 | VDD | power_in | Positive supply for logic and I/O pins. |
| 8 | RB0/INT0/FLT0/AN10 | bidirectional | Digital I/O with weak internal pull-up when configured as input; also external interrupt 0, ECCP1 PWM Fault input, and analog input 10. |
| 9 | RB1/INT1/AN8 | bidirectional | Digital I/O with weak internal pull-up when configured as input; also external interrupt 1 and analog input 8. |
| 10 | RB2/INT2/CANTX | bidirectional | Digital I/O with weak internal pull-up when configured as input; also external interrupt 2 and CAN bus transmit output. |
| 11 | RB3/CANRX | bidirectional | Digital I/O with weak internal pull-up when configured as input; also CAN bus receive input, which must be set as a digital input in TRISB<3>. |
| 12 | NC | unconnected | No connect. |
| 13 | NC | unconnected | No connect. |
| 14 | RB4/KBI0/AN9 | bidirectional | Digital I/O with weak internal pull-up when configured as input; also interrupt-on-pin-change KBI0 and analog input 9. |
| 15 | RB5/KBI1/PGM | bidirectional | Digital I/O with weak internal pull-up when configured as input; also interrupt-on-pin-change KBI1 and low-voltage ICSP programming enable (PGM). |
| 16 | RB6/KBI2/PGC | bidirectional | Digital I/O with weak internal pull-up when configured as input; also interrupt-on-pin-change KBI2 and In-Circuit Debugger/ICSP programming clock. |
| 17 | RB7/KBI3/PGD | bidirectional | Digital I/O with weak internal pull-up when configured as input; also interrupt-on-pin-change KBI3 and In-Circuit Debugger/ICSP programming data. |
| 18 | MCLR/VPP/RE3 | input | Active-low Master Clear (Reset) input when the MCLRE Configuration bit is 1; otherwise RE3 digital input. VPP is the programming voltage input used by ICSP operation. |
| 19 | RA0/AN0/CVREF | bidirectional | Digital I/O; analog input 0 (enabled on POR, overriding the digital input) and comparator voltage reference analog output CVREF. |
| 20 | RA1/AN1 | bidirectional | Digital I/O; analog input 1 (enabled on POR, overriding the digital input). |
| 21 | RA2/AN2/VREF- | bidirectional | Digital I/O; analog input 2 (enabled on POR) and A/D and comparator negative voltage reference input VREF-. |
| 22 | RA3/AN3/VREF+ | bidirectional | Digital I/O; analog input 3 (enabled on POR) and A/D and comparator positive voltage reference input VREF+. |
| 23 | RA4/T0CKI | bidirectional | Digital I/O; Timer0 external clock input (Schmitt Trigger). |
| 24 | RA5/AN4/SS/HLVDIN | bidirectional | Digital I/O; analog input 4 (enabled on POR), MSSP SPI slave select input, and High/Low-Voltage Detect external trip point input HLVDIN. |
| 25 | RE0/RD/AN5 | bidirectional | Digital I/O; Parallel Slave Port read enable RD input (PSP mode) and analog input 5. |
| 26 | RE1/WR/AN6/C1OUT | bidirectional | Digital I/O; Parallel Slave Port write enable WR input, analog input 6, and Comparator 1 output. |
| 27 | RE2/CS/AN7/C2OUT | bidirectional | Digital I/O; Parallel Slave Port chip select CS input, analog input 7, and Comparator 2 output. |
| 28 | VDD | power_in | Positive supply for logic and I/O pins. |
| 29 | VSS | power_in | Ground reference for logic and I/O pins. |
| 30 | OSC1/CLKI/RA7 | input | Oscillator crystal or external clock input; when not used as an oscillator pin it is general purpose I/O RA7 (ST buffer in RC mode, CMOS otherwise). |
| 31 | OSC2/CLKO/RA6 | output | Oscillator crystal output, or CLKO at FOSC/4 in RC mode; when not used as an oscillator pin it is general purpose I/O RA6. |
| 32 | RC0/T1OSO/T13CKI | bidirectional | Digital I/O (Schmitt Trigger input); Timer1 oscillator output T1OSO and Timer1/Timer3 external clock input T13CKI. |
| 33 | NC | unconnected | No connect. |
| 34 | NC | unconnected | No connect. |
| 35 | RC1/T1OSI | bidirectional | Digital I/O (Schmitt Trigger input); Timer1 oscillator input T1OSI. |
| 36 | RC2/CCP1 | bidirectional | Digital I/O (Schmitt Trigger input); CCP1 capture input, compare output, or PWM output. |
| 37 | RC3/SCK/SCL | bidirectional | Digital I/O (Schmitt Trigger input); MSSP synchronous serial clock for SPI mode or I2C clock SCL. |
| 38 | RD0/PSP0/C1IN+ | bidirectional | Digital I/O with Schmitt Trigger input; Parallel Slave Port data bit 0 and Comparator 1 positive input C1IN+ (analog). |
| 39 | RD1/PSP1/C1IN- | bidirectional | Digital I/O with Schmitt Trigger input; Parallel Slave Port data bit 1 and Comparator 1 negative input C1IN- (analog). |
| 40 | RD2/PSP2/C2IN+ | bidirectional | Digital I/O with Schmitt Trigger input; Parallel Slave Port data bit 2 and Comparator 2 positive input C2IN+ (analog). |
| 41 | RD3/PSP3/C2IN- | bidirectional | Digital I/O with Schmitt Trigger input; Parallel Slave Port data bit 3 and Comparator 2 negative input C2IN- (analog). |
| 42 | RC4/SDI/SDA | bidirectional | Digital I/O (Schmitt Trigger input); MSSP SPI data input or I2C data I/O SDA. |
| 43 | RC5/SDO | bidirectional | Digital I/O (Schmitt Trigger input); MSSP SPI data output. |
| 44 | RC6/TX/CK | bidirectional | Digital I/O (Schmitt Trigger input); EUSART asynchronous transmit TX or synchronous clock CK. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | TQFP-44(10x10) |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 44 |
CAD (KiCad official)
- Symbol:
PIC18F4585-E - Footprint:
Package_QFP:TQFP-44_10x10mm_P0.8mm - 3D model: TQFP-44(10x10) (KiCad packages3D, STEP)
- 3D model files:
pic18f4585-e-pt-etched.step/pic18f4585-e-pt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic18f4585-e-pt.step/pic18f4585-e-pt.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (453 pp, sha256
74abd6f935fb9ac4, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# PIC18F4585-E
**Microchip Tech** · Microcontroller Units (MCUs/MPUs/SOCs) · TQFP-44(10x10)
PIC18F4585-E from Microchip Tech, in a TQFP-44(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RC7/RX/DT | bidirectional | Digital I/O with Schmitt Trigger input; EUSART asynchronous receive (RX) or synchronous data (DT). |
| 2 | RD4/PSP4/ECCP1/P1A | bidirectional | Digital I/O with Schmitt Trigger input; also Parallel Slave Port data bit 4 (TTL input when PSP is enabled), ECCP1 capture/compare, and ECCP1 PWM output P1A. |
| 3 | RD5/PSP5/P1B | bidirectional | Digital I/O with Schmitt Trigger input; also Parallel Slave Port data bit 5 and ECCP1 PWM output P1B. |
| 4 | RD6/PSP6/P1C | bidirectional | Digital I/O with Schmitt Trigger input; also Parallel Slave Port data bit 6 and ECCP1 PWM output P1C. |
| 5 | RD7/PSP7/P1D | bidirectional | Digital I/O with Schmitt Trigger input; also Parallel Slave Port data bit 7 and ECCP1 PWM output P1D. |
| 6 | VSS | power_in | Ground reference for logic and I/O pins. |
| 7 | VDD | power_in | Positive supply for logic and I/O pins. |
| 8 | RB0/INT0/FLT0/AN10 | bidirectional | Digital I/O with weak internal pull-up when configured as input; also external interrupt 0, ECCP1 PWM Fault input, and analog input 10. |
| 9 | RB1/INT1/AN8 | bidirectional | Digital I/O with weak internal pull-up when configured as input; also external interrupt 1 and analog input 8. |
| 10 | RB2/INT2/CANTX | bidirectional | Digital I/O with weak internal pull-up when configured as input; also external interrupt 2 and CAN bus transmit output. |
| 11 | RB3/CANRX | bidirectional | Digital I/O with weak internal pull-up when configured as input; also CAN bus receive input, which must be set as a digital input in TRISB<3>. |
| 12 | NC | unconnected | No connect. |
| 13 | NC | unconnected | No connect. |
| 14 | RB4/KBI0/AN9 | bidirectional | Digital I/O with weak internal pull-up when configured as input; also interrupt-on-pin-change KBI0 and analog input 9. |
| 15 | RB5/KBI1/PGM | bidirectional | Digital I/O with weak internal pull-up when configured as input; also interrupt-on-pin-change KBI1 and low-voltage ICSP programming enable (PGM). |
| 16 | RB6/KBI2/PGC | bidirectional | Digital I/O with weak internal pull-up when configured as input; also interrupt-on-pin-change KBI2 and In-Circuit Debugger/ICSP programming clock. |
| 17 | RB7/KBI3/PGD | bidirectional | Digital I/O with weak internal pull-up when configured as input; also interrupt-on-pin-change KBI3 and In-Circuit Debugger/ICSP programming data. |
| 18 | MCLR/VPP/RE3 | input | Active-low Master Clear (Reset) input when the MCLRE Configuration bit is 1; otherwise RE3 digital input. VPP is the programming voltage input used by ICSP operation. |
| 19 | RA0/AN0/CVREF | bidirectional | Digital I/O; analog input 0 (enabled on POR, overriding the digital input) and comparator voltage reference analog output CVREF. |
| 20 | RA1/AN1 | bidirectional | Digital I/O; analog input 1 (enabled on POR, overriding the digital input). |
| 21 | RA2/AN2/VREF- | bidirectional | Digital I/O; analog input 2 (enabled on POR) and A/D and comparator negative voltage reference input VREF-. |
| 22 | RA3/AN3/VREF+ | bidirectional | Digital I/O; analog input 3 (enabled on POR) and A/D and comparator positive voltage reference input VREF+. |
| 23 | RA4/T0CKI | bidirectional | Digital I/O; Timer0 external clock input (Schmitt Trigger). |
| 24 | RA5/AN4/SS/HLVDIN | bidirectional | Digital I/O; analog input 4 (enabled on POR), MSSP SPI slave select input, and High/Low-Voltage Detect external trip point input HLVDIN. |
| 25 | RE0/RD/AN5 | bidirectional | Digital I/O; Parallel Slave Port read enable RD input (PSP mode) and analog input 5. |
| 26 | RE1/WR/AN6/C1OUT | bidirectional | Digital I/O; Parallel Slave Port write enable WR input, analog input 6, and Comparator 1 output. |
| 27 | RE2/CS/AN7/C2OUT | bidirectional | Digital I/O; Parallel Slave Port chip select CS input, analog input 7, and Comparator 2 output. |
| 28 | VDD | power_in | Positive supply for logic and I/O pins. |
| 29 | VSS | power_in | Ground reference for logic and I/O pins. |
| 30 | OSC1/CLKI/RA7 | input | Oscillator crystal or external clock input; when not used as an oscillator pin it is general purpose I/O RA7 (ST buffer in RC mode, CMOS otherwise). |
| 31 | OSC2/CLKO/RA6 | output | Oscillator crystal output, or CLKO at FOSC/4 in RC mode; when not used as an oscillator pin it is general purpose I/O RA6. |
| 32 | RC0/T1OSO/T13CKI | bidirectional | Digital I/O (Schmitt Trigger input); Timer1 oscillator output T1OSO and Timer1/Timer3 external clock input T13CKI. |
| 33 | NC | unconnected | No connect. |
| 34 | NC | unconnected | No connect. |
| 35 | RC1/T1OSI | bidirectional | Digital I/O (Schmitt Trigger input); Timer1 oscillator input T1OSI. |
| 36 | RC2/CCP1 | bidirectional | Digital I/O (Schmitt Trigger input); CCP1 capture input, compare output, or PWM output. |
| 37 | RC3/SCK/SCL | bidirectional | Digital I/O (Schmitt Trigger input); MSSP synchronous serial clock for SPI mode or I2C clock SCL. |
| 38 | RD0/PSP0/C1IN+ | bidirectional | Digital I/O with Schmitt Trigger input; Parallel Slave Port data bit 0 and Comparator 1 positive input C1IN+ (analog). |
| 39 | RD1/PSP1/C1IN- | bidirectional | Digital I/O with Schmitt Trigger input; Parallel Slave Port data bit 1 and Comparator 1 negative input C1IN- (analog). |
| 40 | RD2/PSP2/C2IN+ | bidirectional | Digital I/O with Schmitt Trigger input; Parallel Slave Port data bit 2 and Comparator 2 positive input C2IN+ (analog). |
| 41 | RD3/PSP3/C2IN- | bidirectional | Digital I/O with Schmitt Trigger input; Parallel Slave Port data bit 3 and Comparator 2 negative input C2IN- (analog). |
| 42 | RC4/SDI/SDA | bidirectional | Digital I/O (Schmitt Trigger input); MSSP SPI data input or I2C data I/O SDA. |
| 43 | RC5/SDO | bidirectional | Digital I/O (Schmitt Trigger input); MSSP SPI data output. |
| 44 | RC6/TX/CK | bidirectional | Digital I/O (Schmitt Trigger input); EUSART asynchronous transmit TX or synchronous clock CK. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | TQFP-44(10x10) |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 44 |
## CAD (KiCad official)
- Symbol: `PIC18F4585-E`
- Footprint: `Package_QFP:TQFP-44_10x10mm_P0.8mm`
- 3D model: TQFP-44(10x10) (KiCad packages3D, STEP)
- 3D model files: `pic18f4585-e-pt-etched.step` / `pic18f4585-e-pt-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `pic18f4585-e-pt.step` / `pic18f4585-e-pt.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Microchip Tech datasheet](https://ww1.microchip.com/downloads/aemDocuments/documents/MCU08/ProductDocuments/DataSheets/PIC18F2585_2680_4585_4680-data-sheet-30009625D.pdf) (453 pp, sha256 `74abd6f935fb9ac4`, retrieved 2026-11-13, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/pic18f4585-e-pt-datasheet.pdf)