main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers pic18f4585-e-pt: footprint pads join the pin-hover bus with the symbol (44 pads) · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
pic18f4585-e-pt-etched.glb pic18f4585-e-pt: factory component page (tier=mfr) · Ray
pic18f4585-e-pt-etched.step pic18f4585-e-pt: factory component page (tier=mfr) · Ray
pic18f4585-e-pt-hero.glb pic18f4585-e-pt: hero GLB from the etched model (keeps the MPN mark) · Ray
pic18f4585-e-pt-hero.overlay.json pic18f4585-e-pt: hero GLB from the etched model (keeps the MPN mark) · Ray
pic18f4585-e-pt.glb Publish 0.1.0 · Ray
pic18f4585-e-pt.kicad_mod Publish 0.1.0 · Ray
pic18f4585-e-pt.kicad_sym Publish 0.1.0 · Ray
pic18f4585-e-pt.lbr Publish 0.1.0 · Ray
pic18f4585-e-pt.step Publish 0.1.0 · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 44 pins · Ray

PIC18F4585-E

Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · TQFP-44(10x10)

PIC18F4585-E from Microchip Tech, in a TQFP-44(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 RC7/RX/DT bidirectional Digital I/O with Schmitt Trigger input; EUSART asynchronous receive (RX) or synchronous data (DT).
2 RD4/PSP4/ECCP1/P1A bidirectional Digital I/O with Schmitt Trigger input; also Parallel Slave Port data bit 4 (TTL input when PSP is enabled), ECCP1 capture/compare, and ECCP1 PWM output P1A.
3 RD5/PSP5/P1B bidirectional Digital I/O with Schmitt Trigger input; also Parallel Slave Port data bit 5 and ECCP1 PWM output P1B.
4 RD6/PSP6/P1C bidirectional Digital I/O with Schmitt Trigger input; also Parallel Slave Port data bit 6 and ECCP1 PWM output P1C.
5 RD7/PSP7/P1D bidirectional Digital I/O with Schmitt Trigger input; also Parallel Slave Port data bit 7 and ECCP1 PWM output P1D.
6 VSS power_in Ground reference for logic and I/O pins.
7 VDD power_in Positive supply for logic and I/O pins.
8 RB0/INT0/FLT0/AN10 bidirectional Digital I/O with weak internal pull-up when configured as input; also external interrupt 0, ECCP1 PWM Fault input, and analog input 10.
9 RB1/INT1/AN8 bidirectional Digital I/O with weak internal pull-up when configured as input; also external interrupt 1 and analog input 8.
10 RB2/INT2/CANTX bidirectional Digital I/O with weak internal pull-up when configured as input; also external interrupt 2 and CAN bus transmit output.
11 RB3/CANRX bidirectional Digital I/O with weak internal pull-up when configured as input; also CAN bus receive input, which must be set as a digital input in TRISB<3>.
12 NC unconnected No connect.
13 NC unconnected No connect.
14 RB4/KBI0/AN9 bidirectional Digital I/O with weak internal pull-up when configured as input; also interrupt-on-pin-change KBI0 and analog input 9.
15 RB5/KBI1/PGM bidirectional Digital I/O with weak internal pull-up when configured as input; also interrupt-on-pin-change KBI1 and low-voltage ICSP programming enable (PGM).
16 RB6/KBI2/PGC bidirectional Digital I/O with weak internal pull-up when configured as input; also interrupt-on-pin-change KBI2 and In-Circuit Debugger/ICSP programming clock.
17 RB7/KBI3/PGD bidirectional Digital I/O with weak internal pull-up when configured as input; also interrupt-on-pin-change KBI3 and In-Circuit Debugger/ICSP programming data.
18 MCLR/VPP/RE3 input Active-low Master Clear (Reset) input when the MCLRE Configuration bit is 1; otherwise RE3 digital input. VPP is the programming voltage input used by ICSP operation.
19 RA0/AN0/CVREF bidirectional Digital I/O; analog input 0 (enabled on POR, overriding the digital input) and comparator voltage reference analog output CVREF.
20 RA1/AN1 bidirectional Digital I/O; analog input 1 (enabled on POR, overriding the digital input).
21 RA2/AN2/VREF- bidirectional Digital I/O; analog input 2 (enabled on POR) and A/D and comparator negative voltage reference input VREF-.
22 RA3/AN3/VREF+ bidirectional Digital I/O; analog input 3 (enabled on POR) and A/D and comparator positive voltage reference input VREF+.
23 RA4/T0CKI bidirectional Digital I/O; Timer0 external clock input (Schmitt Trigger).
24 RA5/AN4/SS/HLVDIN bidirectional Digital I/O; analog input 4 (enabled on POR), MSSP SPI slave select input, and High/Low-Voltage Detect external trip point input HLVDIN.
25 RE0/RD/AN5 bidirectional Digital I/O; Parallel Slave Port read enable RD input (PSP mode) and analog input 5.
26 RE1/WR/AN6/C1OUT bidirectional Digital I/O; Parallel Slave Port write enable WR input, analog input 6, and Comparator 1 output.
27 RE2/CS/AN7/C2OUT bidirectional Digital I/O; Parallel Slave Port chip select CS input, analog input 7, and Comparator 2 output.
28 VDD power_in Positive supply for logic and I/O pins.
29 VSS power_in Ground reference for logic and I/O pins.
30 OSC1/CLKI/RA7 input Oscillator crystal or external clock input; when not used as an oscillator pin it is general purpose I/O RA7 (ST buffer in RC mode, CMOS otherwise).
31 OSC2/CLKO/RA6 output Oscillator crystal output, or CLKO at FOSC/4 in RC mode; when not used as an oscillator pin it is general purpose I/O RA6.
32 RC0/T1OSO/T13CKI bidirectional Digital I/O (Schmitt Trigger input); Timer1 oscillator output T1OSO and Timer1/Timer3 external clock input T13CKI.
33 NC unconnected No connect.
34 NC unconnected No connect.
35 RC1/T1OSI bidirectional Digital I/O (Schmitt Trigger input); Timer1 oscillator input T1OSI.
36 RC2/CCP1 bidirectional Digital I/O (Schmitt Trigger input); CCP1 capture input, compare output, or PWM output.
37 RC3/SCK/SCL bidirectional Digital I/O (Schmitt Trigger input); MSSP synchronous serial clock for SPI mode or I2C clock SCL.
38 RD0/PSP0/C1IN+ bidirectional Digital I/O with Schmitt Trigger input; Parallel Slave Port data bit 0 and Comparator 1 positive input C1IN+ (analog).
39 RD1/PSP1/C1IN- bidirectional Digital I/O with Schmitt Trigger input; Parallel Slave Port data bit 1 and Comparator 1 negative input C1IN- (analog).
40 RD2/PSP2/C2IN+ bidirectional Digital I/O with Schmitt Trigger input; Parallel Slave Port data bit 2 and Comparator 2 positive input C2IN+ (analog).
41 RD3/PSP3/C2IN- bidirectional Digital I/O with Schmitt Trigger input; Parallel Slave Port data bit 3 and Comparator 2 negative input C2IN- (analog).
42 RC4/SDI/SDA bidirectional Digital I/O (Schmitt Trigger input); MSSP SPI data input or I2C data I/O SDA.
43 RC5/SDO bidirectional Digital I/O (Schmitt Trigger input); MSSP SPI data output.
44 RC6/TX/CK bidirectional Digital I/O (Schmitt Trigger input); EUSART asynchronous transmit TX or synchronous clock CK.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package TQFP-44(10x10)
Category Single Chip Microcomputer/Microcontroller
Pins 44

CAD (KiCad official)

  • Symbol: PIC18F4585-E
  • Footprint: Package_QFP:TQFP-44_10x10mm_P0.8mm
  • 3D model: TQFP-44(10x10) (KiCad packages3D, STEP)
  • 3D model files: pic18f4585-e-pt-etched.step / pic18f4585-e-pt-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pic18f4585-e-pt.step / pic18f4585-e-pt.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (453 pp, sha256 74abd6f935fb9ac4, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF