main
Ray Publish 0.1.0 2584b15

PIC18F44K22T-I

Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · TQFP-44(10x10)

PIC18F44K22T-I from Microchip Tech, in a TQFP-44(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 RC7/RX1/DT1/AN19 bidirectional Digital I/O with Schmitt Trigger input; also EUSART1 asynchronous receive RX1, synchronous data DT1, and analog input AN19.
2 RD4/P2D/SDO2/AN24 bidirectional Digital I/O with Schmitt Trigger input; also Enhanced CCP2 PWM output P2D, MSSP2 SPI data out SDO2, and analog input AN24.
3 RD5/P1B/AN25 bidirectional Digital I/O with Schmitt Trigger input; also Enhanced CCP1 PWM output P1B and analog input AN25.
4 RD6/P1C/TX2/CK2/AN26 bidirectional Digital I/O with Schmitt Trigger input; also Enhanced CCP1 PWM output P1C, EUSART2 asynchronous transmit TX2, synchronous clock CK2, and analog input AN26.
5 RD7/P1D/RX2/DT2/AN27 bidirectional Digital I/O with Schmitt Trigger input; also Enhanced CCP1 PWM output P1D, EUSART2 receive RX2 and synchronous data DT2, and analog input AN27.
6 VSS power_in Ground reference for logic and I/O pins.
7 VDD power_in Positive supply for logic and I/O pins; 2.3V to 5.5V for PIC18FXXK22 devices.
8 RB0/INT0/FLT0/SRI/AN12 bidirectional Digital I/O with TTL input; also external interrupt INT0, ECCP PWM Fault input FLT0, SR latch input SRI, and analog input AN12.
9 RB1/INT1/C12IN3-/AN10 bidirectional Digital I/O with TTL input; also external interrupt INT1, comparator C1/C2 inverting input C12IN3-, and analog input AN10.
10 RB2/INT2/CTED1/AN8 bidirectional Digital I/O with TTL input; also external interrupt INT2, CTMU Edge 1 input CTED1, and analog input AN8.
11 RB3/CTED2/P2A/CCP2/C12IN2-/AN9 bidirectional Digital I/O with TTL input; also CTMU Edge 2 input CTED2, Enhanced CCP2 PWM output P2A, CCP2 capture/compare/PWM, comparator C1/C2 inverting input C12IN2-, and analog input AN9.
12 NC unconnected No connect pin; not internally connected.
13 NC unconnected No connect pin; not internally connected.
14 RB4/IOC0/T5G/AN11 bidirectional Digital I/O with TTL input; also interrupt-on-change pin IOC0, Timer5 external clock gate input T5G, and analog input AN11.
15 RB5/IOC1/P3A/CCP3/T3CKI/T1G/AN13 bidirectional Digital I/O with TTL input; also interrupt-on-change pin IOC1, Enhanced CCP3 PWM output P3A, CCP3 capture/compare/PWM, Timer3 clock input T3CKI, Timer1 gate input T1G, and analog input AN13.
16 RB6/IOC2/PGC bidirectional Digital I/O with TTL input; also interrupt-on-change pin IOC2 and In-Circuit Debugger/ICSP programming clock PGC (Schmitt Trigger input).
17 RB7/IOC3/PGD bidirectional Digital I/O with TTL input; also interrupt-on-change pin IOC3 and In-Circuit Debugger/ICSP programming data PGD.
18 RE3/VPP/MCLR input Digital input (Schmitt Trigger) when MCLRE configuration bit is 0; otherwise active-low Master Clear (device Reset) input, and it is also the programming voltage input VPP.
19 RA0/C12IN0-/AN0 bidirectional Digital I/O with TTL input; also comparator C1/C2 inverting input C12IN0- and analog input AN0.
20 RA1/C12IN1-/AN1 bidirectional Digital I/O with TTL input; also comparator C1/C2 inverting input C12IN1- and analog input AN1.
21 RA2/C2IN+/AN2/DACOUT/VREF- bidirectional Digital I/O with TTL input; also comparator C2 noninverting input C2IN+, analog input AN2, DAC reference output DACOUT, and A/D reference voltage (low) input VREF-.
22 RA3/C1IN+/AN3/VREF+ bidirectional Digital I/O with TTL input; also comparator C1 noninverting input C1IN+, analog input AN3, and A/D reference voltage (high) input VREF+.
23 RA4/C1OUT/SRQ/T0CKI bidirectional Digital I/O with Schmitt Trigger input; also comparator C1 output C1OUT, SR latch Q output SRQ, and Timer0 external clock input T0CKI.
24 RA5/C2OUT/SRNQ/SS1/HLVDIN/AN4 bidirectional Digital I/O with TTL input; also comparator C2 output C2OUT, SR latch output SRNQ, MSSP1 SPI client select SS1, High/Low-Voltage Detect input HLVDIN, and analog input AN4.
25 RE0/P3A/CCP3/AN5 bidirectional Digital I/O with Schmitt Trigger input that reads as 0 when used as analog input; also Enhanced CCP3 PWM output P3A, CCP3 capture/compare/PWM, and analog input AN5.
26 RE1/P3B/AN6 bidirectional Digital I/O with Schmitt Trigger input that reads as 0 when used as analog input; also Enhanced CCP3 PWM output P3B and analog input AN6.
27 RE2/CCP5/AN7 bidirectional Digital I/O with Schmitt Trigger input that reads as 0 when used as analog input; also CCP5 capture/compare/PWM and analog input AN7.
28 VDD power_in Positive supply for logic and I/O pins; 2.3V to 5.5V for PIC18FXXK22 devices.
29 VSS power_in Ground reference for logic and I/O pins.
30 RA7/CLKI/OSC1 bidirectional Digital I/O with TTL input (disabled in external oscillator modes); also external clock source input CLKI and oscillator input OSC1 (Schmitt Trigger when in RC mode, CMOS otherwise).
31 RA6/CLKO/OSC2 bidirectional Digital I/O with TTL input (enabled in INTOSC modes when CLKO is not enabled); in RC mode outputs CLKOUT at 1/4 the OSC1 frequency, and in crystal modes serves as oscillator output OSC2.
32 RC0/P2B/T3CKI/T3G/T1CKI/SOSCO bidirectional Digital I/O with Schmitt Trigger input; also Enhanced CCP2 PWM output P2B, Timer3 clock input T3CKI, Timer3 gate input T3G, Timer1 clock input T1CKI, and secondary oscillator output SOSCO.
33 NC unconnected No connect pin; not internally connected.
34 NC unconnected No connect pin; not internally connected.
35 RC1/P2A/CCP2/SOSCI bidirectional Digital I/O with Schmitt Trigger input; also Enhanced CCP2 PWM output P2A, CCP2 capture/compare/PWM, and secondary oscillator input SOSCI.
36 RC2/CTPLS/P1A/CCP1/T5CKI/AN14 bidirectional Digital I/O with Schmitt Trigger input; also CTMU pulse generator output CTPLS, Enhanced CCP1 PWM output P1A, CCP1 capture/compare/PWM, Timer5 clock input T5CKI, and analog input AN14.
37 RC3/SCK1/SCL1/AN15 bidirectional Digital I/O with Schmitt Trigger input; also MSSP1 SPI clock SCK1 or I2C clock SCL1, and analog input AN15.
38 RD0/SCK2/SCL2/AN20 bidirectional Digital I/O with Schmitt Trigger input; also MSSP2 SPI clock SCK2 or I2C clock SCL2, and analog input AN20.
39 RD1/CCP4/SDI2/SDA2/AN21 bidirectional Digital I/O with Schmitt Trigger input; also CCP4 capture/compare/PWM, MSSP2 SPI data in SDI2 or I2C data SDA2, and analog input AN21.
40 RD2/P2B/AN22 bidirectional Digital I/O with Schmitt Trigger input; also Enhanced CCP2 PWM output P2B and analog input AN22.
41 RD3/P2C/SS2/AN23 bidirectional Digital I/O with Schmitt Trigger input; also Enhanced CCP2 PWM output P2C, MSSP2 SPI client select SS2 (TTL input), and analog input AN23.
42 RC4/SDI1/SDA1/AN16 bidirectional Digital I/O with Schmitt Trigger input; also MSSP1 SPI data in SDI1 or I2C data SDA1, and analog input AN16.
43 RC5/SDO1/AN17 bidirectional Digital I/O with Schmitt Trigger input; also MSSP1 SPI data out SDO1 and analog input AN17.
44 RC6/TX1/CK1/AN18 bidirectional Digital I/O with Schmitt Trigger input; also EUSART1 asynchronous transmit TX1, synchronous clock CK1, and analog input AN18.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package TQFP-44(10x10)
Category Single Chip Microcomputer/Microcontroller
Pins 44

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Ambient temperature under bias -40 125 °C 414
Storage temperature -65 150 °C 414
Voltage on any pin with respect to VSS (except VDD and MCLR) -0.3 V Printed maximum is VDD + 0.3V, not a fixed number 414
Voltage on MCLR with respect to VSS 0 11 V Note 2 (latch-up precautions) 414
Total power dissipation 1 W Note 1 414
Maximum current out of VSS pin 300 mA -40°C to +85°C 414
Maximum current out of VSS pin 125 mA +85°C to +125°C 414
Maximum current into VDD pin 200 mA -40°C to +85°C 414
Maximum current into VDD pin 85 mA +85°C to +125°C 414
Input clamp current IIK 20 mA VI < 0 or VI > VDD 414
Output clamp current IOK 20 mA VO < 0 or VO > VDD 414
Maximum current sunk by all ports 200 mA -40°C to +85°C 414
Operating voltage (PIC18FXXK22 devices) 2.3 5.5 V PIC18FXXK22 operating voltage (Table B-1 note 1) 535
Operating frequency 64 MHz Printed as DC - 64 MHz; minimum is DC, not a number 13

CAD (KiCad official)

  • Symbol: PIC18F44K22T-I
  • Footprint: Package_QFP:TQFP-44_10x10mm_P0.8mm
  • 3D model: TQFP-44(10x10) (KiCad packages3D, STEP)
  • 3D model files: pic18f44k22t-i-pt-etched.step / pic18f44k22t-i-pt-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pic18f44k22t-i-pt.step / pic18f44k22t-i-pt.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (539 pp, sha256 d0ba745eb6a13bdb, retrieved 2026-11-17, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF