3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownPIC18F44K22T-I
Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · TQFP-44(10x10)
PIC18F44K22T-I from Microchip Tech, in a TQFP-44(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RC7/RX1/DT1/AN19 | bidirectional | Digital I/O with Schmitt Trigger input; also EUSART1 asynchronous receive RX1, synchronous data DT1, and analog input AN19. |
| 2 | RD4/P2D/SDO2/AN24 | bidirectional | Digital I/O with Schmitt Trigger input; also Enhanced CCP2 PWM output P2D, MSSP2 SPI data out SDO2, and analog input AN24. |
| 3 | RD5/P1B/AN25 | bidirectional | Digital I/O with Schmitt Trigger input; also Enhanced CCP1 PWM output P1B and analog input AN25. |
| 4 | RD6/P1C/TX2/CK2/AN26 | bidirectional | Digital I/O with Schmitt Trigger input; also Enhanced CCP1 PWM output P1C, EUSART2 asynchronous transmit TX2, synchronous clock CK2, and analog input AN26. |
| 5 | RD7/P1D/RX2/DT2/AN27 | bidirectional | Digital I/O with Schmitt Trigger input; also Enhanced CCP1 PWM output P1D, EUSART2 receive RX2 and synchronous data DT2, and analog input AN27. |
| 6 | VSS | power_in | Ground reference for logic and I/O pins. |
| 7 | VDD | power_in | Positive supply for logic and I/O pins; 2.3V to 5.5V for PIC18FXXK22 devices. |
| 8 | RB0/INT0/FLT0/SRI/AN12 | bidirectional | Digital I/O with TTL input; also external interrupt INT0, ECCP PWM Fault input FLT0, SR latch input SRI, and analog input AN12. |
| 9 | RB1/INT1/C12IN3-/AN10 | bidirectional | Digital I/O with TTL input; also external interrupt INT1, comparator C1/C2 inverting input C12IN3-, and analog input AN10. |
| 10 | RB2/INT2/CTED1/AN8 | bidirectional | Digital I/O with TTL input; also external interrupt INT2, CTMU Edge 1 input CTED1, and analog input AN8. |
| 11 | RB3/CTED2/P2A/CCP2/C12IN2-/AN9 | bidirectional | Digital I/O with TTL input; also CTMU Edge 2 input CTED2, Enhanced CCP2 PWM output P2A, CCP2 capture/compare/PWM, comparator C1/C2 inverting input C12IN2-, and analog input AN9. |
| 12 | NC | unconnected | No connect pin; not internally connected. |
| 13 | NC | unconnected | No connect pin; not internally connected. |
| 14 | RB4/IOC0/T5G/AN11 | bidirectional | Digital I/O with TTL input; also interrupt-on-change pin IOC0, Timer5 external clock gate input T5G, and analog input AN11. |
| 15 | RB5/IOC1/P3A/CCP3/T3CKI/T1G/AN13 | bidirectional | Digital I/O with TTL input; also interrupt-on-change pin IOC1, Enhanced CCP3 PWM output P3A, CCP3 capture/compare/PWM, Timer3 clock input T3CKI, Timer1 gate input T1G, and analog input AN13. |
| 16 | RB6/IOC2/PGC | bidirectional | Digital I/O with TTL input; also interrupt-on-change pin IOC2 and In-Circuit Debugger/ICSP programming clock PGC (Schmitt Trigger input). |
| 17 | RB7/IOC3/PGD | bidirectional | Digital I/O with TTL input; also interrupt-on-change pin IOC3 and In-Circuit Debugger/ICSP programming data PGD. |
| 18 | RE3/VPP/MCLR | input | Digital input (Schmitt Trigger) when MCLRE configuration bit is 0; otherwise active-low Master Clear (device Reset) input, and it is also the programming voltage input VPP. |
| 19 | RA0/C12IN0-/AN0 | bidirectional | Digital I/O with TTL input; also comparator C1/C2 inverting input C12IN0- and analog input AN0. |
| 20 | RA1/C12IN1-/AN1 | bidirectional | Digital I/O with TTL input; also comparator C1/C2 inverting input C12IN1- and analog input AN1. |
| 21 | RA2/C2IN+/AN2/DACOUT/VREF- | bidirectional | Digital I/O with TTL input; also comparator C2 noninverting input C2IN+, analog input AN2, DAC reference output DACOUT, and A/D reference voltage (low) input VREF-. |
| 22 | RA3/C1IN+/AN3/VREF+ | bidirectional | Digital I/O with TTL input; also comparator C1 noninverting input C1IN+, analog input AN3, and A/D reference voltage (high) input VREF+. |
| 23 | RA4/C1OUT/SRQ/T0CKI | bidirectional | Digital I/O with Schmitt Trigger input; also comparator C1 output C1OUT, SR latch Q output SRQ, and Timer0 external clock input T0CKI. |
| 24 | RA5/C2OUT/SRNQ/SS1/HLVDIN/AN4 | bidirectional | Digital I/O with TTL input; also comparator C2 output C2OUT, SR latch output SRNQ, MSSP1 SPI client select SS1, High/Low-Voltage Detect input HLVDIN, and analog input AN4. |
| 25 | RE0/P3A/CCP3/AN5 | bidirectional | Digital I/O with Schmitt Trigger input that reads as 0 when used as analog input; also Enhanced CCP3 PWM output P3A, CCP3 capture/compare/PWM, and analog input AN5. |
| 26 | RE1/P3B/AN6 | bidirectional | Digital I/O with Schmitt Trigger input that reads as 0 when used as analog input; also Enhanced CCP3 PWM output P3B and analog input AN6. |
| 27 | RE2/CCP5/AN7 | bidirectional | Digital I/O with Schmitt Trigger input that reads as 0 when used as analog input; also CCP5 capture/compare/PWM and analog input AN7. |
| 28 | VDD | power_in | Positive supply for logic and I/O pins; 2.3V to 5.5V for PIC18FXXK22 devices. |
| 29 | VSS | power_in | Ground reference for logic and I/O pins. |
| 30 | RA7/CLKI/OSC1 | bidirectional | Digital I/O with TTL input (disabled in external oscillator modes); also external clock source input CLKI and oscillator input OSC1 (Schmitt Trigger when in RC mode, CMOS otherwise). |
| 31 | RA6/CLKO/OSC2 | bidirectional | Digital I/O with TTL input (enabled in INTOSC modes when CLKO is not enabled); in RC mode outputs CLKOUT at 1/4 the OSC1 frequency, and in crystal modes serves as oscillator output OSC2. |
| 32 | RC0/P2B/T3CKI/T3G/T1CKI/SOSCO | bidirectional | Digital I/O with Schmitt Trigger input; also Enhanced CCP2 PWM output P2B, Timer3 clock input T3CKI, Timer3 gate input T3G, Timer1 clock input T1CKI, and secondary oscillator output SOSCO. |
| 33 | NC | unconnected | No connect pin; not internally connected. |
| 34 | NC | unconnected | No connect pin; not internally connected. |
| 35 | RC1/P2A/CCP2/SOSCI | bidirectional | Digital I/O with Schmitt Trigger input; also Enhanced CCP2 PWM output P2A, CCP2 capture/compare/PWM, and secondary oscillator input SOSCI. |
| 36 | RC2/CTPLS/P1A/CCP1/T5CKI/AN14 | bidirectional | Digital I/O with Schmitt Trigger input; also CTMU pulse generator output CTPLS, Enhanced CCP1 PWM output P1A, CCP1 capture/compare/PWM, Timer5 clock input T5CKI, and analog input AN14. |
| 37 | RC3/SCK1/SCL1/AN15 | bidirectional | Digital I/O with Schmitt Trigger input; also MSSP1 SPI clock SCK1 or I2C clock SCL1, and analog input AN15. |
| 38 | RD0/SCK2/SCL2/AN20 | bidirectional | Digital I/O with Schmitt Trigger input; also MSSP2 SPI clock SCK2 or I2C clock SCL2, and analog input AN20. |
| 39 | RD1/CCP4/SDI2/SDA2/AN21 | bidirectional | Digital I/O with Schmitt Trigger input; also CCP4 capture/compare/PWM, MSSP2 SPI data in SDI2 or I2C data SDA2, and analog input AN21. |
| 40 | RD2/P2B/AN22 | bidirectional | Digital I/O with Schmitt Trigger input; also Enhanced CCP2 PWM output P2B and analog input AN22. |
| 41 | RD3/P2C/SS2/AN23 | bidirectional | Digital I/O with Schmitt Trigger input; also Enhanced CCP2 PWM output P2C, MSSP2 SPI client select SS2 (TTL input), and analog input AN23. |
| 42 | RC4/SDI1/SDA1/AN16 | bidirectional | Digital I/O with Schmitt Trigger input; also MSSP1 SPI data in SDI1 or I2C data SDA1, and analog input AN16. |
| 43 | RC5/SDO1/AN17 | bidirectional | Digital I/O with Schmitt Trigger input; also MSSP1 SPI data out SDO1 and analog input AN17. |
| 44 | RC6/TX1/CK1/AN18 | bidirectional | Digital I/O with Schmitt Trigger input; also EUSART1 asynchronous transmit TX1, synchronous clock CK1, and analog input AN18. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | TQFP-44(10x10) |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 44 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Ambient temperature under bias | -40 | 125 | °C | 414 | |||
| Storage temperature | -65 | 150 | °C | 414 | |||
| Voltage on any pin with respect to VSS (except VDD and MCLR) | -0.3 | V | Printed maximum is VDD + 0.3V, not a fixed number | 414 | |||
| Voltage on MCLR with respect to VSS | 0 | 11 | V | Note 2 (latch-up precautions) | 414 | ||
| Total power dissipation | 1 | W | Note 1 | 414 | |||
| Maximum current out of VSS pin | 300 | mA | -40°C to +85°C | 414 | |||
| Maximum current out of VSS pin | 125 | mA | +85°C to +125°C | 414 | |||
| Maximum current into VDD pin | 200 | mA | -40°C to +85°C | 414 | |||
| Maximum current into VDD pin | 85 | mA | +85°C to +125°C | 414 | |||
| Input clamp current | IIK | 20 | mA | VI < 0 or VI > VDD | 414 | ||
| Output clamp current | IOK | 20 | mA | VO < 0 or VO > VDD | 414 | ||
| Maximum current sunk by all ports | 200 | mA | -40°C to +85°C | 414 | |||
| Operating voltage (PIC18FXXK22 devices) | 2.3 | 5.5 | V | PIC18FXXK22 operating voltage (Table B-1 note 1) | 535 | ||
| Operating frequency | 64 | MHz | Printed as DC - 64 MHz; minimum is DC, not a number | 13 |
CAD (KiCad official)
- Symbol:
PIC18F44K22T-I - Footprint:
Package_QFP:TQFP-44_10x10mm_P0.8mm - 3D model: TQFP-44(10x10) (KiCad packages3D, STEP)
- 3D model files:
pic18f44k22t-i-pt-etched.step/pic18f44k22t-i-pt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic18f44k22t-i-pt.step/pic18f44k22t-i-pt.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (539 pp, sha256
d0ba745eb6a13bdb, retrieved 2026-11-17, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).