main
History Download
Ray Publish 0.1.0 4eef52f

PIC18F4320-I

Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · QFN-44-EP(8x8)

PIC18F4320-I from Microchip Tech, in a QFN-44-EP(8x8). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 RC7/RX/DT bidirectional Digital I/O with Schmitt Trigger input that serves as USART asynchronous receive (RX) or synchronous data (DT).
2 RD4/PSP4 bidirectional Digital I/O with Schmitt Trigger input, or Parallel Slave Port data bit 4 with TTL input buffer when the PSP module is enabled.
3 RD5/PSP5/P1B bidirectional Digital I/O, Parallel Slave Port data bit 5 (TTL input when PSP enabled), or Enhanced CCP1 output P1B.
4 RD6/PSP6/P1C bidirectional Digital I/O, Parallel Slave Port data bit 6 (TTL input when PSP enabled), or Enhanced CCP1 output P1C.
5 RD7/PSP7/P1D bidirectional Digital I/O, Parallel Slave Port data bit 7 (TTL input when PSP enabled), or Enhanced CCP1 output P1D.
6 VSS power_in Ground reference for logic and I/O pins.
7 VDD power_in Positive supply for logic and I/O pins.
8 VDD power_in Positive supply for logic and I/O pins.
9 RB0/AN12/INT0 bidirectional Digital I/O with software-selectable weak pull-up, analog input 12, or external interrupt 0 (ST input).
10 RB1/AN10/INT1 bidirectional Digital I/O with software-selectable weak pull-up, analog input 10, or external interrupt 1 (ST input).
11 RB2/AN8/INT2 bidirectional Digital I/O with software-selectable weak pull-up, analog input 8, or external interrupt 2 (ST input).
12 RB3/AN9/CCP2 bidirectional Digital I/O with software-selectable weak pull-up, analog input 9, or CCP2 capture input/compare output/PWM2 output (default CCP2 assignment when CCP2MX is set).
13 NC unconnected No connect.
14 RB4/AN11/KBI0 bidirectional Digital I/O with software-selectable weak pull-up, analog input 11, or interrupt-on-change pin.
15 RB5/KBI1/PGM bidirectional Digital I/O with weak pull-up, interrupt-on-change pin, or low-voltage ICSP programming enable pin (ST input).
16 RB6/KBI2/PGC bidirectional Digital I/O with weak pull-up, interrupt-on-change pin, or In-Circuit Debugger and ICSP programming clock pin (ST input).
17 RB7/KBI3/PGD bidirectional Digital I/O with weak pull-up, interrupt-on-change pin, or In-Circuit Debugger and ICSP programming data pin (ST input).
18 MCLR/VPP/RE3 input Active-low Master Clear (Reset) input to the device, also serving as programming voltage input (VPP) and, when MCLR is disabled, as digital input RE3.
19 RA0/AN0 bidirectional Digital I/O (TTL) or analog input 0.
20 RA1/AN1 bidirectional Digital I/O (TTL) or analog input 1.
21 RA2/AN2/VREF-/CVREF bidirectional Digital I/O, analog input 2, A/D reference voltage (low) input, or comparator reference voltage output (CVREF).
22 RA3/AN3/VREF+ bidirectional Digital I/O, analog input 3, or A/D reference voltage (high) input.
23 RA4/T0CKI/C1OUT bidirectional Digital I/O (Schmitt Trigger, open drain when configured as output), Timer0 external clock input, or Comparator 1 output.
24 RA5/AN4/SS/LVDIN/C2OUT bidirectional Digital I/O, analog input 4, SPI slave select input, Low-Voltage Detect input, or Comparator 2 output.
25 RE0/AN5/RD bidirectional Digital I/O (Schmitt Trigger), analog input 5, or Parallel Slave Port read control input (see also WR and CS).
26 RE1/AN6/WR bidirectional Digital I/O (Schmitt Trigger), analog input 6, or Parallel Slave Port write control input (see CS and RD).
27 RE2/AN7/CS bidirectional Digital I/O (Schmitt Trigger), analog input 7, or Parallel Slave Port chip select control input (see RD and WR).
28 NC unconnected No connect.
29 VDD power_in Positive supply for logic and I/O pins.
30 VSS power_in Ground reference for logic and I/O pins.
31 VSS power_in Ground reference for logic and I/O pins.
32 OSC1/CLKI/RA7 input Oscillator crystal or external clock source input (ST buffer in RC mode, CMOS otherwise), or general purpose I/O RA7 when not used as oscillator.
33 OSC2/CLKO/RA6 bidirectional Oscillator crystal output, or CLKO at 1/4 the OSC1 frequency in RC mode, or general purpose I/O RA6 when not used as oscillator.
34 RC0/T1OSO/T1CKI bidirectional Digital I/O (Schmitt Trigger), Timer1 oscillator output, or Timer1/Timer3 external clock input.
35 RC1/T1OSI/CCP2 bidirectional Digital I/O (Schmitt Trigger), Timer1 oscillator input, or CCP2 capture input/compare output/PWM2 output (default CCP2 assignment when CCP2MX is set).
36 RC2/CCP1/P1A bidirectional Digital I/O (Schmitt Trigger), Capture 1 input/Compare 1 output/PWM1 output, or Enhanced CCP1 output P1A.
37 RC3/SCK/SCL bidirectional Digital I/O (Schmitt Trigger), synchronous serial clock input/output for SPI mode, or for I2C mode.
38 RD0/PSP0 bidirectional Digital I/O (Schmitt Trigger) or Parallel Slave Port data bit 0 (TTL input when PSP enabled).
39 RD1/PSP1 bidirectional Digital I/O (Schmitt Trigger) or Parallel Slave Port data bit 1 (TTL input when PSP enabled).
40 RD2/PSP2 bidirectional Digital I/O (Schmitt Trigger) or Parallel Slave Port data bit 2 (TTL input when PSP enabled).
41 RD3/PSP3 bidirectional Digital I/O (Schmitt Trigger) or Parallel Slave Port data bit 3 (TTL input when PSP enabled).
42 RC4/SDI/SDA bidirectional Digital I/O (Schmitt Trigger), SPI data in, or I2C data I/O.
43 RC5/SDO bidirectional Digital I/O (Schmitt Trigger) or SPI data out.
44 RC6/TX/CK bidirectional Digital I/O (Schmitt Trigger), USART asynchronous transmit, or USART synchronous clock.
45 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package QFN-44-EP(8x8)
Category Single Chip Microcomputer/Microcontroller
Pins 45

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
RAM Data Retention Voltage VDR 1.5 V 310
VDD Start Voltage to ensure internal Power-on Reset signal VPOR 0.7 V See section on Power-on Reset for details 310
VDD Rise Rate to ensure internal Power-on Reset signal SVDD 0.05 V/ms See section on Power-on Reset for details 310
Brown-out Reset Voltage, BORV1:BORV0 = 01 VBOR 3.8 4.22 4.64 V Industrial -40°C to +85°C; date codes 0351xxx to 0417xxx; Note 2 310
Brown-out Reset Voltage, BORV1:BORV0 = 00 VBOR 4.09 4.54 4.99 V Industrial -40°C to +85°C; date codes 0351xxx to 0417xxx; Note 2 310
Brown-out Reset Voltage, BORV1:BORV0 = 01 VBOR 3.88 4.22 4.56 V Industrial -10°C to +85°C; date codes above 0417xxx; Note 2 311
Brown-out Reset Voltage, BORV1:BORV0 = 00 VBOR 4.18 4.54 4.9 V Industrial -10°C to +85°C; date codes above 0417xxx; Note 2 311
Brown-out Reset Voltage, BORV1:BORV0 = 00 VBOR 3.9 4.54 5.18 V Industrial -40°C to -10°C; date codes above 0417xxx; Note 2 311
Input Offset Voltage VIOFF -10 5 10 mV 3.0V < VDD < 5.5V, -40°C < TA < +125°C 322
Input Common Mode Voltage VICM 0 V 3.0V < VDD < 5.5V, -40°C < TA < +125°C 322
Response Time TRESP 150 400 ns 3.0V < VDD < 5.5V, -40°C < TA < +125°C; one input at (VDD-1.5)/2, other transitions VSS to VDD 322
Comparator Mode Change to Output Valid TMC2OV 10 μs 3.0V < VDD < 5.5V, -40°C < TA < +125°C 322
Unit Resistor Value (R) VRUR 2 kΩ 3.0V < VDD < 5.5V, -40°C < TA < +125°C 322
Settling Time TSET 10 μs VRR = 1, VR<3:0> transitions from 0000 to 1111 322
Maximum output current sunk by any I/O pin 25 mA 305
Maximum output current sourced by any I/O pin 25 mA 305
VDD Supply Voltage (PIC18F, not LF) VDD 4.2 5.5 V 308

CAD (KiCad official)

  • Symbol: PIC18F4320-I
  • Footprint: Package_DFN_QFN:QFN-44-1EP_8x8mm_P0.65mm_EP6.45x6.45mm
  • 3D model: QFN-44-EP(8x8) (KiCad packages3D, STEP)
  • 3D model files: pic18f4320-i-etched.step / pic18f4320-i-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pic18f4320-i.step / pic18f4320-i.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (394 pp, sha256 9c1ac85d0b2048d6, retrieved 2026-10-30, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF