3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownPIC18F4320-I
Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · QFN-44-EP(8x8)
PIC18F4320-I from Microchip Tech, in a QFN-44-EP(8x8). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RC7/RX/DT | bidirectional | Digital I/O with Schmitt Trigger input that serves as USART asynchronous receive (RX) or synchronous data (DT). |
| 2 | RD4/PSP4 | bidirectional | Digital I/O with Schmitt Trigger input, or Parallel Slave Port data bit 4 with TTL input buffer when the PSP module is enabled. |
| 3 | RD5/PSP5/P1B | bidirectional | Digital I/O, Parallel Slave Port data bit 5 (TTL input when PSP enabled), or Enhanced CCP1 output P1B. |
| 4 | RD6/PSP6/P1C | bidirectional | Digital I/O, Parallel Slave Port data bit 6 (TTL input when PSP enabled), or Enhanced CCP1 output P1C. |
| 5 | RD7/PSP7/P1D | bidirectional | Digital I/O, Parallel Slave Port data bit 7 (TTL input when PSP enabled), or Enhanced CCP1 output P1D. |
| 6 | VSS | power_in | Ground reference for logic and I/O pins. |
| 7 | VDD | power_in | Positive supply for logic and I/O pins. |
| 8 | VDD | power_in | Positive supply for logic and I/O pins. |
| 9 | RB0/AN12/INT0 | bidirectional | Digital I/O with software-selectable weak pull-up, analog input 12, or external interrupt 0 (ST input). |
| 10 | RB1/AN10/INT1 | bidirectional | Digital I/O with software-selectable weak pull-up, analog input 10, or external interrupt 1 (ST input). |
| 11 | RB2/AN8/INT2 | bidirectional | Digital I/O with software-selectable weak pull-up, analog input 8, or external interrupt 2 (ST input). |
| 12 | RB3/AN9/CCP2 | bidirectional | Digital I/O with software-selectable weak pull-up, analog input 9, or CCP2 capture input/compare output/PWM2 output (default CCP2 assignment when CCP2MX is set). |
| 13 | NC | unconnected | No connect. |
| 14 | RB4/AN11/KBI0 | bidirectional | Digital I/O with software-selectable weak pull-up, analog input 11, or interrupt-on-change pin. |
| 15 | RB5/KBI1/PGM | bidirectional | Digital I/O with weak pull-up, interrupt-on-change pin, or low-voltage ICSP programming enable pin (ST input). |
| 16 | RB6/KBI2/PGC | bidirectional | Digital I/O with weak pull-up, interrupt-on-change pin, or In-Circuit Debugger and ICSP programming clock pin (ST input). |
| 17 | RB7/KBI3/PGD | bidirectional | Digital I/O with weak pull-up, interrupt-on-change pin, or In-Circuit Debugger and ICSP programming data pin (ST input). |
| 18 | MCLR/VPP/RE3 | input | Active-low Master Clear (Reset) input to the device, also serving as programming voltage input (VPP) and, when MCLR is disabled, as digital input RE3. |
| 19 | RA0/AN0 | bidirectional | Digital I/O (TTL) or analog input 0. |
| 20 | RA1/AN1 | bidirectional | Digital I/O (TTL) or analog input 1. |
| 21 | RA2/AN2/VREF-/CVREF | bidirectional | Digital I/O, analog input 2, A/D reference voltage (low) input, or comparator reference voltage output (CVREF). |
| 22 | RA3/AN3/VREF+ | bidirectional | Digital I/O, analog input 3, or A/D reference voltage (high) input. |
| 23 | RA4/T0CKI/C1OUT | bidirectional | Digital I/O (Schmitt Trigger, open drain when configured as output), Timer0 external clock input, or Comparator 1 output. |
| 24 | RA5/AN4/SS/LVDIN/C2OUT | bidirectional | Digital I/O, analog input 4, SPI slave select input, Low-Voltage Detect input, or Comparator 2 output. |
| 25 | RE0/AN5/RD | bidirectional | Digital I/O (Schmitt Trigger), analog input 5, or Parallel Slave Port read control input (see also WR and CS). |
| 26 | RE1/AN6/WR | bidirectional | Digital I/O (Schmitt Trigger), analog input 6, or Parallel Slave Port write control input (see CS and RD). |
| 27 | RE2/AN7/CS | bidirectional | Digital I/O (Schmitt Trigger), analog input 7, or Parallel Slave Port chip select control input (see RD and WR). |
| 28 | NC | unconnected | No connect. |
| 29 | VDD | power_in | Positive supply for logic and I/O pins. |
| 30 | VSS | power_in | Ground reference for logic and I/O pins. |
| 31 | VSS | power_in | Ground reference for logic and I/O pins. |
| 32 | OSC1/CLKI/RA7 | input | Oscillator crystal or external clock source input (ST buffer in RC mode, CMOS otherwise), or general purpose I/O RA7 when not used as oscillator. |
| 33 | OSC2/CLKO/RA6 | bidirectional | Oscillator crystal output, or CLKO at 1/4 the OSC1 frequency in RC mode, or general purpose I/O RA6 when not used as oscillator. |
| 34 | RC0/T1OSO/T1CKI | bidirectional | Digital I/O (Schmitt Trigger), Timer1 oscillator output, or Timer1/Timer3 external clock input. |
| 35 | RC1/T1OSI/CCP2 | bidirectional | Digital I/O (Schmitt Trigger), Timer1 oscillator input, or CCP2 capture input/compare output/PWM2 output (default CCP2 assignment when CCP2MX is set). |
| 36 | RC2/CCP1/P1A | bidirectional | Digital I/O (Schmitt Trigger), Capture 1 input/Compare 1 output/PWM1 output, or Enhanced CCP1 output P1A. |
| 37 | RC3/SCK/SCL | bidirectional | Digital I/O (Schmitt Trigger), synchronous serial clock input/output for SPI mode, or for I2C mode. |
| 38 | RD0/PSP0 | bidirectional | Digital I/O (Schmitt Trigger) or Parallel Slave Port data bit 0 (TTL input when PSP enabled). |
| 39 | RD1/PSP1 | bidirectional | Digital I/O (Schmitt Trigger) or Parallel Slave Port data bit 1 (TTL input when PSP enabled). |
| 40 | RD2/PSP2 | bidirectional | Digital I/O (Schmitt Trigger) or Parallel Slave Port data bit 2 (TTL input when PSP enabled). |
| 41 | RD3/PSP3 | bidirectional | Digital I/O (Schmitt Trigger) or Parallel Slave Port data bit 3 (TTL input when PSP enabled). |
| 42 | RC4/SDI/SDA | bidirectional | Digital I/O (Schmitt Trigger), SPI data in, or I2C data I/O. |
| 43 | RC5/SDO | bidirectional | Digital I/O (Schmitt Trigger) or SPI data out. |
| 44 | RC6/TX/CK | bidirectional | Digital I/O (Schmitt Trigger), USART asynchronous transmit, or USART synchronous clock. |
| 45 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | QFN-44-EP(8x8) |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 45 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| RAM Data Retention Voltage | VDR | 1.5 | V | 310 | |||
| VDD Start Voltage to ensure internal Power-on Reset signal | VPOR | 0.7 | V | See section on Power-on Reset for details | 310 | ||
| VDD Rise Rate to ensure internal Power-on Reset signal | SVDD | 0.05 | V/ms | See section on Power-on Reset for details | 310 | ||
| Brown-out Reset Voltage, BORV1:BORV0 = 01 | VBOR | 3.8 | 4.22 | 4.64 | V | Industrial -40°C to +85°C; date codes 0351xxx to 0417xxx; Note 2 | 310 |
| Brown-out Reset Voltage, BORV1:BORV0 = 00 | VBOR | 4.09 | 4.54 | 4.99 | V | Industrial -40°C to +85°C; date codes 0351xxx to 0417xxx; Note 2 | 310 |
| Brown-out Reset Voltage, BORV1:BORV0 = 01 | VBOR | 3.88 | 4.22 | 4.56 | V | Industrial -10°C to +85°C; date codes above 0417xxx; Note 2 | 311 |
| Brown-out Reset Voltage, BORV1:BORV0 = 00 | VBOR | 4.18 | 4.54 | 4.9 | V | Industrial -10°C to +85°C; date codes above 0417xxx; Note 2 | 311 |
| Brown-out Reset Voltage, BORV1:BORV0 = 00 | VBOR | 3.9 | 4.54 | 5.18 | V | Industrial -40°C to -10°C; date codes above 0417xxx; Note 2 | 311 |
| Input Offset Voltage | VIOFF | -10 | 5 | 10 | mV | 3.0V < VDD < 5.5V, -40°C < TA < +125°C | 322 |
| Input Common Mode Voltage | VICM | 0 | V | 3.0V < VDD < 5.5V, -40°C < TA < +125°C | 322 | ||
| Response Time | TRESP | 150 | 400 | ns | 3.0V < VDD < 5.5V, -40°C < TA < +125°C; one input at (VDD-1.5)/2, other transitions VSS to VDD | 322 | |
| Comparator Mode Change to Output Valid | TMC2OV | 10 | μs | 3.0V < VDD < 5.5V, -40°C < TA < +125°C | 322 | ||
| Unit Resistor Value (R) | VRUR | 2 | kΩ | 3.0V < VDD < 5.5V, -40°C < TA < +125°C | 322 | ||
| Settling Time | TSET | 10 | μs | VRR = 1, VR<3:0> transitions from 0000 to 1111 | 322 | ||
| Maximum output current sunk by any I/O pin | 25 | mA | 305 | ||||
| Maximum output current sourced by any I/O pin | 25 | mA | 305 | ||||
| VDD Supply Voltage (PIC18F, not LF) | VDD | 4.2 | 5.5 | V | 308 |
CAD (KiCad official)
- Symbol:
PIC18F4320-I - Footprint:
Package_DFN_QFN:QFN-44-1EP_8x8mm_P0.65mm_EP6.45x6.45mm - 3D model: QFN-44-EP(8x8) (KiCad packages3D, STEP)
- 3D model files:
pic18f4320-i-etched.step/pic18f4320-i-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic18f4320-i.step/pic18f4320-i.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (394 pp, sha256
9c1ac85d0b2048d6, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).