main
Ray
Publish 0.1.1
d41f99c
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325
{
"slug": "pic18f26q10-i-so",
"version": "0.1.1",
"type": "component",
"description": "Microchip Tech Microcontroller Units (MCUs/MPUs/SOCs), SOIC-28-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"tags": [
"component",
"single chip microcomputer-microcontroller",
"pic18f26q10-i",
"factory-2.0.0",
"extractor-text"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"pic18f26q10-i.kicad_sym",
"pic18f26q10-i.kicad_mod",
"pic18f26q10-i.glb",
"pic18f26q10-i.step",
"pic18f26q10-i.lbr",
"docs/hero.png",
"docs/pic18f26q10-i-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"pic18f26q10-i-hero.glb",
"pic18f26q10-i-hero.overlay.json",
"pic18f26q10-i-etched.glb",
"pic18f26q10-i-etched.step",
"pic18f26q10-i-so-hero.glb",
"pic18f26q10-i-so-hero.overlay.json"
],
"component": {
"mpn": "PIC18F26Q10-I/SO",
"manufacturer": "Microchip Tech",
"package": "SOIC-28-300mil",
"pin_count": 28,
"category": "Single Chip Microcomputer/Microcontroller",
"subcategory": "Microcontroller Units (MCUs/MPUs/SOCs)",
"datasheet": "https://ww1.microchip.com/downloads/aemDocuments/documents/MCU08/ProductDocuments/DataSheets/PIC18F26-45-46-Q10-Data-Sheet-DS40001996.pdf",
"parts": {
"symbol": "pic18f26q10-i.kicad_sym",
"footprint": "pic18f26q10-i.kicad_mod",
"model_3d": "pic18f26q10-i-so-hero.glb",
"model_3d_plain": "pic18f26q10-i-etched.glb",
"model_3d_step": "pic18f26q10-i-etched.step",
"model_3d_step_plain": "pic18f26q10-i.step",
"lbr": "pic18f26q10-i.lbr"
},
"distributor_links": {
"lcsc": "C646520"
},
"distributor_check": {
"checked_at": "2026-11-02T16:46:08Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": null,
"status": "no match"
},
"mouser": {
"pn": null,
"status": "no match"
}
},
"pins": [
{
"number": "1",
"name": "RE3/VPP/MCLR",
"type": "input",
"description": "Input-only pin RE3 that serves as MCLR/VPP and is only available as RE3 when MCLR functionality is disabled."
},
{
"number": "2",
"name": "RA0",
"type": "bidirectional",
"description": "Analog input ANA0 with comparator inputs C1IN0- and C2IN0-, interrupt-on-change IOCA0, and weak pull-up support."
},
{
"number": "3",
"name": "RA1",
"type": "bidirectional",
"description": "Analog input ANA1 with comparator inputs C1IN1- and C2IN1-, interrupt-on-change IOCA1, and weak pull-up support."
},
{
"number": "4",
"name": "RA2",
"type": "bidirectional",
"description": "Analog input ANA2 with DAC1OUT1 output, VREF- reference input for DAC and ADC, comparator inputs C1IN0+ and C2IN0+, and interrupt-on-change IOCA2."
},
{
"number": "5",
"name": "RA3",
"type": "bidirectional",
"description": "Analog input ANA3 with VREF+ reference input for DAC and ADC, comparator input C1IN1+, and PPS-selectable DSM carrier low output MDCARL."
},
{
"number": "6",
"name": "RA4",
"type": "bidirectional",
"description": "Analog input ANA4 with Timer0 clock input T0CKI, PPS-selectable DSM carrier high MDCARH, and interrupt-on-change IOCA4."
},
{
"number": "7",
"name": "RA5",
"type": "bidirectional",
"description": "Analog input ANA5 with DSM source input MDSRC, MSSP1 slave select SS1, and interrupt-on-change IOCA5."
},
{
"number": "8",
"name": "VSS",
"type": "power_in",
"description": "Ground reference pin; all VSS pins must be connected."
},
{
"number": "9",
"name": "RA7",
"type": "bidirectional",
"description": "Analog input ANA7 that is also the OSC1/CLKIN oscillator input in select oscillator modes, with interrupt-on-change IOCA7."
},
{
"number": "10",
"name": "RA6",
"type": "bidirectional",
"description": "Analog input ANA6 that is also the OSC2/CLKOUT pin, with interrupt-on-change IOCA6."
},
{
"number": "11",
"name": "RC0",
"type": "bidirectional",
"description": "Analog input ANC0 with Timer1/Timer3 clock inputs T1CKI and T3CKI, Timer3 gate T3G, interrupt-on-change IOCC0, and secondary oscillator output SOSCO."
},
{
"number": "12",
"name": "RC1",
"type": "bidirectional",
"description": "Analog input ANC1 with CCP2 capture/compare/PWM, interrupt-on-change IOCC1, and secondary oscillator pins SOSCIN/SOSCI."
},
{
"number": "13",
"name": "RC2",
"type": "bidirectional",
"description": "Analog input ANC2 with Timer5 clock input T5CKI, CCP1 capture/compare/PWM, and interrupt-on-change IOCC2."
},
{
"number": "14",
"name": "RC3",
"type": "bidirectional",
"description": "Analog input ANC3 with Timer2 input T2IN, interrupt-on-change IOCC3, and MSSP1 clock SCK1/SCL1 using I2C logic levels."
},
{
"number": "15",
"name": "RC4",
"type": "bidirectional",
"description": "Analog input ANC4 with interrupt-on-change IOCC4 and MSSP1 data SDI1/SDA1 using I2C logic levels."
},
{
"number": "16",
"name": "RC5",
"type": "bidirectional",
"description": "Analog input ANC5 with Timer4 input T4IN and interrupt-on-change IOCC5."
},
{
"number": "17",
"name": "RC6",
"type": "bidirectional",
"description": "Analog input ANC6 with EUSART1 synchronous clock CK1 and interrupt-on-change IOCC6."
},
{
"number": "18",
"name": "RC7",
"type": "bidirectional",
"description": "Analog input ANC7 with EUSART1 receive/data RX1/DT1 and interrupt-on-change IOCC7."
},
{
"number": "19",
"name": "VSS",
"type": "power_in",
"description": "Ground reference pin; all VSS pins must be connected."
},
{
"number": "20",
"name": "VDD",
"type": "power_in",
"description": "Power supply pin; a 0.1 uF bypass capacitor to VSS is required on the VDD pin."
},
{
"number": "21",
"name": "RB0",
"type": "bidirectional",
"description": "Analog input ANB0 with comparator input C2IN1+, CWG1 input, ZCD input ZCDIN, external interrupt INT0, and MSSP2 slave select SS2."
},
{
"number": "22",
"name": "RB1",
"type": "bidirectional",
"description": "Analog input ANB1 with comparator inputs C1IN3- and C2IN3-, external interrupt INT1, and MSSP2 clock SCK2/SCL2 using I2C logic levels."
},
{
"number": "23",
"name": "RB2",
"type": "bidirectional",
"description": "Analog input ANB2 with external interrupt INT2 and MSSP2 data SDI2/SDA2 using I2C logic levels."
},
{
"number": "24",
"name": "RB3",
"type": "bidirectional",
"description": "Analog input ANB3 with comparator inputs C1IN2- and C2IN2- and interrupt-on-change IOCB3."
},
{
"number": "25",
"name": "RB4",
"type": "bidirectional",
"description": "Analog input ANB4 with Timer5 gate input T5G and interrupt-on-change IOCB4."
},
{
"number": "26",
"name": "RB5",
"type": "bidirectional",
"description": "Analog input ANB5 with Timer1 gate input T1G and interrupt-on-change IOCB5."
},
{
"number": "27",
"name": "RB6",
"type": "bidirectional",
"description": "Analog input ANB6 with EUSART2 clock CK2, interrupt-on-change IOCB6, and the ICSPCLK programming clock pin."
},
{
"number": "28",
"name": "RB7",
"type": "bidirectional",
"description": "Analog input ANB7 with DAC1OUT2 output, Timer6 input T6IN, EUSART2 receive/data RX2/DT2, interrupt-on-change IOCB7, and the ICSPDAT programming data pin."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-haiku-5-5",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: Pin numbers are taken from the Table 3 column shared by 28-Pin SPDIP, SOIC and SSOP (page 5-6). The ; Functions marked (1) in Table 3 are PPS-remappable. Descriptions list only the default pin functions; The datasheet gives no per-pin electrical limits in the provided pages, so descriptions contain func"
],
"pages_sent": 69,
"cost_usd": 0.0787,
"at": "2026-11-02T16:45:52"
},
"datasheet": {
"url": "https://ww1.microchip.com/downloads/aemDocuments/documents/MCU08/ProductDocuments/DataSheets/PIC18F26-45-46-Q10-Data-Sheet-DS40001996.pdf",
"pages": 770,
"sha256": "3b107140e4098e35",
"source_tier": "mfr"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 28,
"described": 28,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "pic18f26q10-i.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
10.3,
17.9,
2.75
],
"zmin_mm": -0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "b889a13dbe9ec59e79fa9f1b5118b00bfa54f9582392335ff3365b64afc264b1",
"checked": "2026-11-02",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "pic18f26q10-i-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
10.3,
17.9,
2.75
],
"zmin_mm": -0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "40363ac0d9490d44983b6908b1794be2d491a1c648f3f33f159a6cd0513063f2",
"checked": "2026-11-02",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
],
"family": {
"base": "PIC18F26Q10-I",
"siblings": [
"PIC18F26Q10-I/SP",
"PIC18F26Q10-I/SS"
],
"old_slug": "pic18f26q10-i",
"note": "renamed from the cut-base slug to the part it was built from (slug collision split, 2026-11-11)"
}
},
"visibility": "public"
}