Generated by kicad-footprint-generator · KiCad file format 20260206
PIC18F26Q10-I/SO
Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · SOIC-28-300mil
PIC18F26Q10-I from Microchip Tech, in a SOIC-28-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RE3/VPP/MCLR | input | Input-only pin RE3 that serves as MCLR/VPP and is only available as RE3 when MCLR functionality is disabled. |
| 2 | RA0 | bidirectional | Analog input ANA0 with comparator inputs C1IN0- and C2IN0-, interrupt-on-change IOCA0, and weak pull-up support. |
| 3 | RA1 | bidirectional | Analog input ANA1 with comparator inputs C1IN1- and C2IN1-, interrupt-on-change IOCA1, and weak pull-up support. |
| 4 | RA2 | bidirectional | Analog input ANA2 with DAC1OUT1 output, VREF- reference input for DAC and ADC, comparator inputs C1IN0+ and C2IN0+, and interrupt-on-change IOCA2. |
| 5 | RA3 | bidirectional | Analog input ANA3 with VREF+ reference input for DAC and ADC, comparator input C1IN1+, and PPS-selectable DSM carrier low output MDCARL. |
| 6 | RA4 | bidirectional | Analog input ANA4 with Timer0 clock input T0CKI, PPS-selectable DSM carrier high MDCARH, and interrupt-on-change IOCA4. |
| 7 | RA5 | bidirectional | Analog input ANA5 with DSM source input MDSRC, MSSP1 slave select SS1, and interrupt-on-change IOCA5. |
| 8 | VSS | power_in | Ground reference pin; all VSS pins must be connected. |
| 9 | RA7 | bidirectional | Analog input ANA7 that is also the OSC1/CLKIN oscillator input in select oscillator modes, with interrupt-on-change IOCA7. |
| 10 | RA6 | bidirectional | Analog input ANA6 that is also the OSC2/CLKOUT pin, with interrupt-on-change IOCA6. |
| 11 | RC0 | bidirectional | Analog input ANC0 with Timer1/Timer3 clock inputs T1CKI and T3CKI, Timer3 gate T3G, interrupt-on-change IOCC0, and secondary oscillator output SOSCO. |
| 12 | RC1 | bidirectional | Analog input ANC1 with CCP2 capture/compare/PWM, interrupt-on-change IOCC1, and secondary oscillator pins SOSCIN/SOSCI. |
| 13 | RC2 | bidirectional | Analog input ANC2 with Timer5 clock input T5CKI, CCP1 capture/compare/PWM, and interrupt-on-change IOCC2. |
| 14 | RC3 | bidirectional | Analog input ANC3 with Timer2 input T2IN, interrupt-on-change IOCC3, and MSSP1 clock SCK1/SCL1 using I2C logic levels. |
| 15 | RC4 | bidirectional | Analog input ANC4 with interrupt-on-change IOCC4 and MSSP1 data SDI1/SDA1 using I2C logic levels. |
| 16 | RC5 | bidirectional | Analog input ANC5 with Timer4 input T4IN and interrupt-on-change IOCC5. |
| 17 | RC6 | bidirectional | Analog input ANC6 with EUSART1 synchronous clock CK1 and interrupt-on-change IOCC6. |
| 18 | RC7 | bidirectional | Analog input ANC7 with EUSART1 receive/data RX1/DT1 and interrupt-on-change IOCC7. |
| 19 | VSS | power_in | Ground reference pin; all VSS pins must be connected. |
| 20 | VDD | power_in | Power supply pin; a 0.1 uF bypass capacitor to VSS is required on the VDD pin. |
| 21 | RB0 | bidirectional | Analog input ANB0 with comparator input C2IN1+, CWG1 input, ZCD input ZCDIN, external interrupt INT0, and MSSP2 slave select SS2. |
| 22 | RB1 | bidirectional | Analog input ANB1 with comparator inputs C1IN3- and C2IN3-, external interrupt INT1, and MSSP2 clock SCK2/SCL2 using I2C logic levels. |
| 23 | RB2 | bidirectional | Analog input ANB2 with external interrupt INT2 and MSSP2 data SDI2/SDA2 using I2C logic levels. |
| 24 | RB3 | bidirectional | Analog input ANB3 with comparator inputs C1IN2- and C2IN2- and interrupt-on-change IOCB3. |
| 25 | RB4 | bidirectional | Analog input ANB4 with Timer5 gate input T5G and interrupt-on-change IOCB4. |
| 26 | RB5 | bidirectional | Analog input ANB5 with Timer1 gate input T1G and interrupt-on-change IOCB5. |
| 27 | RB6 | bidirectional | Analog input ANB6 with EUSART2 clock CK2, interrupt-on-change IOCB6, and the ICSPCLK programming clock pin. |
| 28 | RB7 | bidirectional | Analog input ANB7 with DAC1OUT2 output, Timer6 input T6IN, EUSART2 receive/data RX2/DT2, interrupt-on-change IOCB7, and the ICSPDAT programming data pin. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOIC-28-300mil |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 28 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Voltage on VDD pin with respect to VSS | VDD | -0.3 | 6.5 | V | on VDD pin | 694 | |
| Voltage on MCLR pin with respect to VSS | -0.3 | 9 | V | on MCLR pin | 694 | ||
| Voltage on all other pins with respect to VSS | -0.3 | V | on all other pins; upper limit printed as (VDD + 0.3V) | 694 | |||
| Ambient temperature under bias | -40 | 125 | °C | 694 | |||
| Storage temperature | -65 | 150 | °C | 694 | |||
| Maximum current on VSS pin | 350 | mA | -40°C ≤ TA ≤ +85°C | 694 | |||
| Maximum current on VSS pin | 120 | mA | 85°C < TA ≤ +125°C | 694 | |||
| Maximum current on any standard I/O pin | -50 | 50 | mA | 694 | |||
| Clamp current, IK | IK | -20 | 20 | mA | VPIN < 0 or VPIN > VDD | 694 | |
| Total power dissipation | 800 | mW | 694 | ||||
| VDD, Operating Supply Voltage | VDD | 1.8 | 5.5 | V | 695 | ||
| TA, Operating Ambient Temperature Range, Industrial | TA | -40 | 85 | °C | Industrial temperature range | 695 | |
| RAM Data Retention voltage | VDR | 1.7 | V | Device in SLEEP mode | 695 | ||
| VDD Rise Rate to ensure internal Power-on Reset signal | SVDD | 0.05 | V/ms | BOR and LPBOR disabled | 696 | ||
| Supply current, XT = 4 MHz | IDDXT4 | 490 | 770 | μA | XT = 4 MHz, 3.0V | 696 | |
| Supply current, HFINTOSC = 16 MHz | IDDHFO16 | 1.3 | 1.7 | mA | HFINTOSC = 16 MHz, 3.0V | 696 | |
| Supply current, HFINTOSC = 64 MHz | IDDHFOPLL | 4.4 | 5.8 | mA | HFINTOSC = 64 MHz, 3.0V | 696 | |
| Supply current, HS + PLL = 64 MHz | IDDHSPLL64 | 4.3 | 5.7 | mA | HS+PLL = 64 MHz, 3.0V | 697 | |
| Power-down current, IPD Base | IPD | 0.6 | 4 | μA | 3.0V, VREGPM b'10', max at +85°C | 697 | |
| Power-down current, Low-Frequency Internal Oscillator/WDT | IPD_WDT | 0.9 | 5 | μA | 3.0V, VREGPM b'10', max at +85°C | 697 | |
| Power-down current, Brown-out Reset (BOR) | IPD_BOR | 30 | 60 | μA | 3.0V, VREGPM b'10', max at +85°C | 698 | |
| Input Low Voltage, I/O port with TTL buffer | VIL | 0.8 | V | 4.5V ≤ VDD ≤ 5.5V | 698 | ||
| Input Low Voltage, I/O port with SMBus levels | VIL | 0.8 | V | 2.7V ≤ VDD ≤ 5.5V | 698 | ||
| Input High Voltage, I/O port with TTL buffer | VIH | 2 | V | 4.5V ≤ VDD ≤ 5.5V | 698 | ||
| Input High Voltage, I/O port with SMBus levels | VIH | 2.1 | V | 2.7V ≤ VDD ≤ 5.5V | 698 | ||
| Input Leakage Current, I/O ports | IIL | -125 | 5 | 125 | nA | VSS ≤ VPIN ≤ VDD, Pin at high-impedance, 85°C | 699 |
| Input Leakage Current, MCLR | IIL | -200 | 50 | 200 | nA | VSS ≤ VPIN ≤ VDD, Pin at high-impedance, 85°C | 699 |
| Weak Pull-up Current | IPUR | 80 | 140 | 200 | μA | VDD = 3.0V, VPIN = VSS | 699 |
| Output Low Voltage, I/O ports | VOL | 0.6 | V | IOL = 10.0 mA, VDD = 3.0V | 699 | ||
| Self-Timed Sector Write | TP_REW | 6 | 10 | ms | 699 | ||
| Self-Timed Sector Erase | TSE | 10 | 14 | ms | 699 | ||
| Secondary Oscillator Clock Frequency | FSEC | 32.4 | 32.768 | 33.1 | kHz | Note 4 | 701 |
| System Clock Frequency | FOSC | 64 | MHz | Note 2, Note 3 | 701 | ||
| Instruction Period | TCY | 62.5 | ns | 701 | |||
| PLL Input Frequency Range | FPLLIN | 4 | 16 | MHz | 703 | ||
| PLL Output Frequency Stability | FPLLJIT | -0.25 | 0.25 | % | 703 | ||
| MCLR Pulse Width Low to ensure Reset | TMCLR | 2 | μs | 705 | |||
| Brown-out Reset Voltage | VBOR | 2.7 | 2.85 | 3 | V | BORV = 00 | 706 |
| Brown-out Reset Voltage | VBOR | 2.55 | 2.7 | 2.85 | V | BORV = 01 | 706 |
| Brown-out Reset Voltage | VBOR | 2.3 | 2.45 | 2.6 | V | BORV = 10 | 706 |
| Brown-out Reset Voltage | VBOR | 1.8 | 1.9 | 2.1 | V | BORV = 11 | 706 |
| Low-Power Brown-out Reset Voltage | VLPBOR | 1.8 | 1.9 | 2.2 | V | 706 | |
| Integral Non-Linearity Error | EIL | -1 | 0.1 | 1 | LSb | ADCREF+ = 3.0V, ADCREF- = 0V | 707 |
| Offset Error | EOFF | -2 | 0.5 | 2 | LSb | ADCREF+ = 3.0V, ADCREF- = 0V | 707 |
| Gain Error | EGN | -2 | 0.2 | 2 | LSb | ADCREF+ = 3.0V, ADCREF- = 0V | 707 |
| Input Offset Voltage | VIOFF | -30 | 30 | mV | VICM = VDD/2 | 708 | |
| Comparator Hysteresis | VHYST | 10 | 25 | 40 | mV | 709 | |
| FVR Voltage Error 1x (1.024V) | VFVR1 | -4 | 4 | % | VDD ≥ 2.5V, -40°C to 85°C | 709 | |
| FVR Voltage Error 2x (2.048V) | VFVR2 | -4 | 4 | % | VDD ≥ 2.5V, -40°C to 85°C | 709 | |
| FVR Voltage Error 4x (4.096V) | VFVR4 | -4 | 4 | % | VDD ≥ 4.75V, -40°C to 85°C | 709 | |
| Clock high to data-out valid | TCKH2DTV | 80 | ns | 3.0V ≤ VDD ≤ 5.5V | 712 | ||
| Clock high to data-out valid | TCKH2DTV | 100 | ns | 1.8V ≤ VDD ≤ 5.5V | 712 | ||
| Thermal Resistance Junction to Ambient, 28-pin SOIC package | θJA | 80 | °C/W | 28-pin SOIC package | 700 | ||
| Maximum Junction Temperature | TJMAX | 150 | °C | 700 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | PPS | body RxyPPS | 299 |
CAD (KiCad official)
- Symbol:
PIC18F26Q10-I - Footprint:
Package_SO:SOIC-28W_7.5x17.9mm_P1.27mm - 3D model: SOIC-28-300mil (KiCad packages3D, STEP)
- 3D model files:
pic18f26q10-i-etched.step/pic18f26q10-i-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic18f26q10-i.step/pic18f26q10-i.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (770 pp, sha256
3b107140e4098e35, retrieved 2026-11-02, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
Other parts in this family
This page is PIC18F26Q10-I/SO. These part numbers share its family name but are different parts (another package, rating or grade), each with its own page:
- PIC18F26Q10-I/SP
- PIC18F26Q10-I/SS