main
Ray Publish 0.2.0 df54565

PIC18F26K40T-I

Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · SSOP-28-208mil

PIC18F26K40T-I from Microchip Tech, in a SSOP-28-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 ~{MCLR}/VPP/RE3 input Input-only port pin RE3 with weak pull-up and IOCE3 interrupt-on-change, also the MCLR reset / VPP programming voltage input.
2 RA0 bidirectional PORTA bit 0 with analog input ANA0, comparator inputs C1IN0-/C2IN0-, IOCA0 interrupt-on-change and weak pull-up.
3 RA1 bidirectional PORTA bit 1 with analog input ANA1, comparator inputs C1IN1-/C2IN1-, IOCA1 interrupt-on-change and weak pull-up.
4 RA2 bidirectional PORTA bit 2 with analog input ANA2, DAC1OUT1 output, Vref- (DAC/ADC), comparator inputs C1IN0+/C2IN0+ and IOCA2 interrupt-on-change.
5 RA3 bidirectional PORTA bit 3 with analog input ANA3, Vref+ (DAC/ADC), comparator input C1IN1+, MDCARL (DSM carrier low) and IOCA3 interrupt-on-change.
6 RA4 bidirectional PORTA bit 4 with analog input ANA4, T0CKI timer 0 clock input, MDCARH (DSM carrier high) and IOCA4 interrupt-on-change.
7 RA5 bidirectional PORTA bit 5 with analog input ANA5, MDSRC (DSM source), SS1 MSSP slave select and IOCA5 interrupt-on-change.
8 VSS power_in Ground reference pin, must always be connected.
9 CLKIN/OSC1/RA7 bidirectional PORTA bit 7 with analog input ANA7, also OSC1 oscillator input / CLKIN external clock input and IOCA7 interrupt-on-change.
10 CLKOUT/OSC2/RA6 bidirectional PORTA bit 6 with analog input ANA6, also OSC2 oscillator output / CLKOUT and IOCA6 interrupt-on-change.
11 SOSCO/RC0 bidirectional PORTC bit 0 with analog input ANC0, secondary oscillator output SOSCO, T1CKI/T3CKI/T3G timer inputs and IOCC0 interrupt-on-change.
12 SOSCI/RC1 bidirectional PORTC bit 1 with analog input ANC1, secondary oscillator input SOSCIN/SOSCI, CCP2 input and IOCC1 interrupt-on-change.
13 RC2 bidirectional PORTC bit 2 with analog input ANC2, T5CKI timer clock input, CCP1 input and IOCC2 interrupt-on-change.
14 RC3 bidirectional PORTC bit 3 with analog input ANC3, T2IN timer input, MSSP1 SCK1/SCL1 (I2C logic levels) and IOCC3 interrupt-on-change.
15 RC4 bidirectional PORTC bit 4 with analog input ANC4, MSSP1 SDI1/SDA1 (I2C logic levels) and IOCC4 interrupt-on-change.
16 RC5 bidirectional PORTC bit 5 with analog input ANC5, T4IN timer input and IOCC5 interrupt-on-change.
17 RC6 bidirectional PORTC bit 6 with analog input ANC6, EUSART1 CK1 clock (bidirectional) and IOCC6 interrupt-on-change.
18 RC7 bidirectional PORTC bit 7 with analog input ANC7, EUSART1 RX1/DT1 (bidirectional) and IOCC7 interrupt-on-change.
19 VSS power_in Ground reference pin, must always be connected.
20 VDD power_in Positive supply pin (2.3V to 5.5V for PIC18F26K40), must always be connected.
21 RB0 bidirectional PORTB bit 0 with analog input ANB0, comparator input C2IN1+, CWG1 input, ZCDIN zero-cross detect input, INT0 and IOCB0 interrupt-on-change.
22 RB1 bidirectional PORTB bit 1 with analog input ANB1, comparator inputs C1IN3-/C2IN3-, INT1 and IOCB1 interrupt-on-change.
23 RB2 bidirectional PORTB bit 2 with analog input ANB2, INT2 and IOCB2 interrupt-on-change.
24 RB3 bidirectional PORTB bit 3 with analog input ANB3, comparator inputs C1IN2-/C2IN2- and IOCB3 interrupt-on-change.
25 RB4 bidirectional PORTB bit 4 with analog input ANB4, T5G timer gate input and IOCB4 interrupt-on-change.
26 RB5 bidirectional PORTB bit 5 with analog input ANB5, T1G timer gate input and IOCB5 interrupt-on-change.
27 RB6/ICSPCLK bidirectional PORTB bit 6 with analog input ANB6, also ICSPCLK in-circuit serial programming clock and IOCB6 interrupt-on-change.
28 RB7/ICSPDAT bidirectional PORTB bit 7 with analog input ANB7, DAC1OUT2 output, T6IN timer input, also ICSPDAT in-circuit serial programming data and IOCB7 interrupt-on-change.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package SSOP-28-208mil
Category Single Chip Microcomputer/Microcontroller
Pins 28

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Ambient temperature under bias -40 125 °C 668
Storage temperature -65 150 °C 668
Voltage on VDD pin (PIC18F) VDD -0.3 6.5 V with respect to VSS 668
Voltage on MCLR pin MCLR -0.3 9 V with respect to VSS 668
Voltage on all other pins -0.3 V with respect to VSS; printed maximum is VDD + 0.3V 668
Maximum current on VSS pin 350 mA -40°C ≤ TA ≤ +85°C 668
Maximum current on VSS pin 120 mA 85°C < TA ≤ +125°C 668
Maximum current on VDD pin, 28-pin devices 250 mA -40°C ≤ TA ≤ +85°C 668
Maximum current on VDD pin, 28-pin devices 85 mA 85°C < TA ≤ +125°C 668
Maximum current on any standard I/O pin -50 50 mA 668
Clamp current IK -20 20 mA VPIN < 0 or VPIN > VDD 668
Total power dissipation 800 mW 668
VDD operating supply voltage VDD 2.3 V FOSC ≤ 16 MHz (PIC18F) 669
VDD operating supply voltage VDD 2.5 V FOSC > 16 MHz (PIC18F) 669
VDD operating supply voltage VDD 3 V FOSC > 32 MHz (PIC18F) 669
VDD maximum operating supply voltage VDDMAX 5.5 V PIC18F26/45/46K40 669
Industrial operating ambient temperature TA_MIN -40 °C Industrial temperature 669
Industrial operating ambient temperature TA_MAX 85 °C Industrial temperature 669
RAM data retention voltage VDR 1.7 V Device in Sleep mode 671
Supply current, XT oscillator IDDXT4 550 750 μA XT = 4 MHz, 3.0V 673
Supply current, HFINTOSC IDDHFO16 2 2.7 mA HFINTOSC = 16 MHz, 3.0V 673
Supply current, HFINTOSC PLL IDDHFOPLL 7.5 9.5 mA HFINTOSC = 64 MHz, 3.0V 673
Supply current, HS+PLL IDDHSPLL64 7 9 mA HS+PLL = 64 MHz, 3.0V 673
Power-down current, IPD base IPD 0.4 4 μA VREGPM = 1, 3.0V, max at +85°C 674
Power-down current, IPD base IPD 0.4 12 μA VREGPM = 1, 3.0V, max at +125°C 674
Power-down current, low-frequency oscillator/WDT IPD_WDT 0.6 5 μA VREGPM = 1, 3.0V, max at +85°C 674
Power-down current, low-frequency oscillator/WDT IPD_WDT 0.6 13 μA VREGPM = 1, 3.0V, max at +125°C 674
Power-down current, Brown-out Reset (BOR) IPD_BOR 14 19 μA VREGPM = 1, 3.0V, max at +85°C 674
Power-down current, Brown-out Reset (BOR) IPD_BOR 14 21 μA VREGPM = 1, 3.0V, max at +125°C 674
Power-down current, FVR IPD_FVR 32 53 μA VREGPM = 1, 3.0V, FVRCON = 0x81 or 0x84, max at +85°C 674
Power-down current, FVR IPD_FVR 32 62 μA VREGPM = 1, 3.0V, FVRCON = 0x81 or 0x84, max at +125°C 674
Input low voltage, I/O port with TTL buffer VIL 0.8 V 4.5V ≤ VDD ≤ 5.5V 675
Input high voltage, I/O port with TTL buffer VIH 2 V 4.5V ≤ VDD ≤ 5.5V 676
Input leakage current, I/O ports (85°C) IIL -125 5 125 nA VSS ≤ VPIN ≤ VDD, pin at high-impedance, 85°C 676
Input leakage current, I/O ports (125°C) IIL -1000 5 1000 nA VSS ≤ VPIN ≤ VDD, pin at high-impedance, 125°C 676
Weak pull-up current IPUR 25 120 200 μA VDD = 3.0V, VPIN = VSS 676
Output low voltage, I/O ports VOL 0.6 V IOL = 10.0 mA, VDD = 3.0V 676
Pin capacitance, all I/O pins CIO 5 50 pF 676
Byte erase and write cycle time TD_BEW 4 5 ms 676
Self-timed row erase or self-timed write time TP_REW 2 2.5 ms 677
System clock frequency FOSC 64 MHz Notes 2, 3 679
HS oscillator clock frequency FHS 20 MHz VDD > 2.5V, Note 4 679
XT oscillator clock frequency FXT 4 MHz Note 4 679
Secondary oscillator clock frequency FSEC 32.4 32.768 33.1 kHz Note 4 679
PLL input frequency range FPLLIN 4 16 MHz 680
PLL output frequency range FPLLOUT 16 64 MHz Note 1 680
CLKOUT rising edge delay TCLKOUTH 70 ns 681
CLKOUT falling edge delay TCLKOUTL 72 ns 681
Port input setup time TIO_SETUP 20 ns 681
Port input hold time TIO_HOLD 50 ns 681
Brown-out Reset voltage trip point VBOR 2.7 2.85 3 V BORV = 00 683
Brown-out Reset voltage trip point VBOR 2.55 2.7 2.85 V BORV = 01 683
Brown-out Reset voltage trip point VBOR 2.3 2.45 2.6 V BORV = 10 683
Thermal resistance junction to ambient, 28-pin SSOP θJA 90 °C/W 28-pin SSOP package 677
Maximum junction temperature TJMAX 150 °C 677

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
housing PPS body RxyPPS 296

CAD (KiCad official)

  • Symbol: PIC18F26K40T-I
  • Footprint: Package_SO:SSOP-28_5.3x10.2mm_P0.65mm
  • 3D model: SSOP-28-208mil (KiCad packages3D, STEP)
  • 3D model files: pic18f26k40t-i-ss-etched.step / pic18f26k40t-i-ss-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pic18f26k40t-i-ss.step / pic18f26k40t-i-ss.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (755 pp, sha256 e86a60cc739f0fa4, retrieved 2026-11-17, tier: manufacturer)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF