← Commit history
Publish 0.2.0
6 files changed
+74−64
README.md+46−47@@ -54,60 +54,59 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries |---|---|---|---|---|---|---|---| | Ambient temperature under bias | | -40 | | 125 | °C | | 668 | | Storage temperature | | -65 | | 150 | °C | | 668 |-| Voltage on VDD pin with respect to VSS | | -0.3 | | 6.5 | V | PIC18F26/45/46K40 (F device, not LF) | 668 |-| Voltage on MCLR pin with respect to VSS | | -0.3 | | 9 | V | | 668 |+| Voltage on VDD pin (PIC18F) | VDD | -0.3 | | 6.5 | V | with respect to VSS | 668 |+| Voltage on MCLR pin | MCLR | -0.3 | | 9 | V | with respect to VSS | 668 |+| Voltage on all other pins | | -0.3 | | | V | with respect to VSS; printed maximum is VDD + 0.3V | 668 | | Maximum current on VSS pin | | | | 350 | mA | -40°C ≤ TA ≤ +85°C | 668 | | Maximum current on VSS pin | | | | 120 | mA | 85°C < TA ≤ +125°C | 668 |-| Maximum current on VDD pin for 28-pin devices | | | | 250 | mA | -40°C ≤ TA ≤ +85°C | 668 |-| Maximum current on VDD pin for 28-pin devices | | | | 85 | mA | 85°C < TA ≤ +125°C | 668 |+| Maximum current on VDD pin, 28-pin devices | | | | 250 | mA | -40°C ≤ TA ≤ +85°C | 668 |+| Maximum current on VDD pin, 28-pin devices | | | | 85 | mA | 85°C < TA ≤ +125°C | 668 | | Maximum current on any standard I/O pin | | -50 | | 50 | mA | | 668 | | Clamp current | IK | -20 | | 20 | mA | VPIN < 0 or VPIN > VDD | 668 | | Total power dissipation | | | | 800 | mW | | 668 |-| Operating supply voltage VDD | VDD | 2.3 | | | V | FOSC ≤ 16 MHz | 671 |-| Operating supply voltage VDD | VDD | 2.5 | | | V | FOSC > 16 MHz | 671 |-| Operating supply voltage VDD | VDD | 3 | | | V | FOSC > 32 MHz | 671 |-| Operating supply voltage VDD | VDD | | | 5.5 | V | VDDMAX | 671 |-| Operating ambient temperature range (industrial) | TA | -40 | | 85 | °C | Industrial temperature range (-I) | 669 |-| Thermal resistance junction to ambient | θJA | | 90 | | °C/W | 28-pin SSOP package | 677 |-| Thermal resistance junction to case | θJC | | 24 | | °C/W | 28-pin SSOP package | 677 |-| Supply current, XT oscillator | IDDXT4 | | 550 | 750 | μA | XT = 4 MHz; 3.0V | 673 |-| Supply current, HFINTOSC | IDDHFO16 | | 2 | 2.7 | mA | HFINTOSC = 16 MHz; 3.0V | 673 |-| Supply current, HFINTOSC PLL | IDDHFOPLL | | 7.5 | 9.5 | mA | HFINTOSC = 64 MHz; 3.0V | 673 |-| Supply current, HS+PLL | IDDHSPLL64 | | 7 | 9 | mA | HS+PLL = 64 MHz; 3.0V | 673 |-| Power-down current, IPD base | IPD | | 0.4 | 4 | μA | VREGPM = 1; 3.0V; max at +85°C | 674 |-| Power-down current, IPD base | IPD | | 0.4 | 12 | μA | VREGPM = 1; 3.0V; max at +125°C | 674 |-| Power-down current, Low-Frequency Internal Oscillator/WDT | IPD_WDT | | 0.6 | 5 | μA | VREGPM = 1; 3.0V; max at +85°C | 674 |-| Power-down current, Low-Frequency Internal Oscillator/WDT | IPD_WDT | | 0.6 | 13 | μA | VREGPM = 1; 3.0V; max at +125°C | 674 |-| Power-down current, Low-Power BOR | IPD_LPBOR | | 0.7 | 5 | μA | VREGPM = 1; 3.0V; max at +85°C | 675 |-| Power-down current, Low-Power BOR | IPD_LPBOR | | 0.7 | 13 | μA | VREGPM = 1; 3.0V; max at +125°C | 675 |-| Power-down current, FVR | IPD_FVR | | 32 | 53 | μA | VREGPM = 1; 3.0V; FVRCON = 0x81 or 0x84; max at +85°C | 675 |-| Power-down current, FVR | IPD_FVR | | 32 | 62 | μA | VREGPM = 1; 3.0V; FVRCON = 0x81 or 0x84; max at +125°C | 675 |-| Power-down current, Brown-out Reset | IPD_BOR | | 14 | 19 | μA | VREGPM = 1; 3.0V; max at +85°C | 675 |-| Power-down current, Brown-out Reset | IPD_BOR | | 14 | 21 | μA | VREGPM = 1; 3.0V; max at +125°C | 675 |-| Power-down current, Comparator | IPD_CMP | | 31 | 47 | μA | VREGPM = 1; 3.0V; max at +85°C | 675 |-| Power-down current, Comparator | IPD_CMP | | 31 | 50 | μA | VREGPM = 1; 3.0V; max at +125°C | 675 |-| Input low voltage, I/O port with TTL buffer | VIL | | | 0.8 | V | 4.5V≤VDD≤5.5V | 675 |-| Input low voltage, I/O port with SMBus levels | VIL | | | 0.8 | V | 2.7V≤VDD≤5.5V | 675 |-| Input high voltage, I/O port with TTL buffer | VIH | 2 | | | V | 4.5V≤VDD≤5.5V | 676 |-| Input high voltage, I/O port with SMBus levels | VIH | 2.1 | | | V | 2.7V≤VDD≤5.5V | 676 |-| Input leakage current, I/O ports | IIL | -125 | 5 | 125 | nA | VSS≤VPIN≤VDD, Pin at high-impedance, 85°C | 676 |-| Input leakage current, I/O ports | IIL | -1000 | 5 | 1000 | nA | VSS≤VPIN≤VDD, Pin at high-impedance, 125°C | 676 |-| Input leakage current, MCLR | IIL | -200 | 50 | 200 | nA | VSS≤VPIN≤VDD, Pin at high-impedance, 85°C | 676 |-| Weak pull-up current | IPUR | 25 | 120 | 200 | μA | VDD=3.0V, VPIN=VSS | 676 |-| Output low voltage, I/O ports | VOL | | | 0.6 | V | IOL=10.0 mA, VDD=3.0V | 676 |+| VDD operating supply voltage | VDD | 2.3 | | | V | FOSC ≤ 16 MHz (PIC18F) | 669 |+| VDD operating supply voltage | VDD | 2.5 | | | V | FOSC > 16 MHz (PIC18F) | 669 |+| VDD operating supply voltage | VDD | 3 | | | V | FOSC > 32 MHz (PIC18F) | 669 |+| VDD maximum operating supply voltage | VDDMAX | | | 5.5 | V | PIC18F26/45/46K40 | 669 |+| Industrial operating ambient temperature | TA_MIN | -40 | | | °C | Industrial temperature | 669 |+| Industrial operating ambient temperature | TA_MAX | | | 85 | °C | Industrial temperature | 669 |+| RAM data retention voltage | VDR | 1.7 | | | V | Device in Sleep mode | 671 |+| Supply current, XT oscillator | IDDXT4 | | 550 | 750 | μA | XT = 4 MHz, 3.0V | 673 |+| Supply current, HFINTOSC | IDDHFO16 | | 2 | 2.7 | mA | HFINTOSC = 16 MHz, 3.0V | 673 |+| Supply current, HFINTOSC PLL | IDDHFOPLL | | 7.5 | 9.5 | mA | HFINTOSC = 64 MHz, 3.0V | 673 |+| Supply current, HS+PLL | IDDHSPLL64 | | 7 | 9 | mA | HS+PLL = 64 MHz, 3.0V | 673 |+| Power-down current, IPD base | IPD | | 0.4 | 4 | μA | VREGPM = 1, 3.0V, max at +85°C | 674 |+| Power-down current, IPD base | IPD | | 0.4 | 12 | μA | VREGPM = 1, 3.0V, max at +125°C | 674 |+| Power-down current, low-frequency oscillator/WDT | IPD_WDT | | 0.6 | 5 | μA | VREGPM = 1, 3.0V, max at +85°C | 674 |+| Power-down current, low-frequency oscillator/WDT | IPD_WDT | | 0.6 | 13 | μA | VREGPM = 1, 3.0V, max at +125°C | 674 |+| Power-down current, Brown-out Reset (BOR) | IPD_BOR | | 14 | 19 | μA | VREGPM = 1, 3.0V, max at +85°C | 674 |+| Power-down current, Brown-out Reset (BOR) | IPD_BOR | | 14 | 21 | μA | VREGPM = 1, 3.0V, max at +125°C | 674 |+| Power-down current, FVR | IPD_FVR | | 32 | 53 | μA | VREGPM = 1, 3.0V, FVRCON = 0x81 or 0x84, max at +85°C | 674 |+| Power-down current, FVR | IPD_FVR | | 32 | 62 | μA | VREGPM = 1, 3.0V, FVRCON = 0x81 or 0x84, max at +125°C | 674 |+| Input low voltage, I/O port with TTL buffer | VIL | | | 0.8 | V | 4.5V ≤ VDD ≤ 5.5V | 675 |+| Input high voltage, I/O port with TTL buffer | VIH | 2 | | | V | 4.5V ≤ VDD ≤ 5.5V | 676 |+| Input leakage current, I/O ports (85°C) | IIL | -125 | 5 | 125 | nA | VSS ≤ VPIN ≤ VDD, pin at high-impedance, 85°C | 676 |+| Input leakage current, I/O ports (125°C) | IIL | -1000 | 5 | 1000 | nA | VSS ≤ VPIN ≤ VDD, pin at high-impedance, 125°C | 676 |+| Weak pull-up current | IPUR | 25 | 120 | 200 | μA | VDD = 3.0V, VPIN = VSS | 676 |+| Output low voltage, I/O ports | VOL | | | 0.6 | V | IOL = 10.0 mA, VDD = 3.0V | 676 | | Pin capacitance, all I/O pins | CIO | | 5 | 50 | pF | | 676 | | Byte erase and write cycle time | TD_BEW | | 4 | 5 | ms | | 676 | | Self-timed row erase or self-timed write time | TP_REW | | 2 | 2.5 | ms | | 677 |-| ADC integral error | EIL | -1 | 0.1 | 1 | LSb | ADCREF+=3.0V, ADCREF- = 0V | 684 |-| ADC differential error | EDL | -1 | 0.1 | 1 | LSb | ADCREF+=3.0V, ADCREF- = 0V | 684 |-| ADC offset error | EOFF | -2.5 | 0.5 | 2.5 | LSb | ADCREF+=3.0V, ADCREF- = 0V | 684 |-| ADC gain error | EGN | -1.5 | 0.2 | 1.5 | LSb | ADCREF+=3.0V, ADCREF- = 0V | 684 |-| ADC clock period (FOSC-based) | TAD | 1 | | 9 | μs | Using FOSC as the ADC clock source, ADOCS = 0 | 684 |-| Data retention voltage in Sleep | VDR | 1.7 | | | V | Device in Sleep mode | 671 |-| VDD rise rate to ensure internal Power-on Reset signal | SVDD | 0.05 | | | V/ms | BOR or LPBOR disabled | 671 |-| 1x gain FVR output (1.024V) tolerance | VFVR1 | -4 | | 4 | % | VDD≥2.5V, -40°C to 85°C | 686 |-| 2x gain FVR output (2.048V) tolerance | VFVR2 | -4 | | 4 | % | VDD≥2.5V, -40°C to 85°C | 686 |-| 4x gain FVR output (4.096V) tolerance | VFVR4 | -5 | | 5 | % | VDD≥4.75V, -40°C to 85°C | 686 |+| System clock frequency | FOSC | | | 64 | MHz | Notes 2, 3 | 679 |+| HS oscillator clock frequency | FHS | | | 20 | MHz | VDD > 2.5V, Note 4 | 679 |+| XT oscillator clock frequency | FXT | | | 4 | MHz | Note 4 | 679 |+| Secondary oscillator clock frequency | FSEC | 32.4 | 32.768 | 33.1 | kHz | Note 4 | 679 |+| PLL input frequency range | FPLLIN | 4 | | 16 | MHz | | 680 |+| PLL output frequency range | FPLLOUT | 16 | | 64 | MHz | Note 1 | 680 |+| CLKOUT rising edge delay | TCLKOUTH | | | 70 | ns | | 681 |+| CLKOUT falling edge delay | TCLKOUTL | | | 72 | ns | | 681 |+| Port input setup time | TIO_SETUP | 20 | | | ns | | 681 |+| Port input hold time | TIO_HOLD | 50 | | | ns | | 681 |+| Brown-out Reset voltage trip point | VBOR | 2.7 | 2.85 | 3 | V | BORV = 00 | 683 |+| Brown-out Reset voltage trip point | VBOR | 2.55 | 2.7 | 2.85 | V | BORV = 01 | 683 |+| Brown-out Reset voltage trip point | VBOR | 2.3 | 2.45 | 2.6 | V | BORV = 10 | 683 |+| Thermal resistance junction to ambient, 28-pin SSOP | θJA | | 90 | | °C/W | 28-pin SSOP package | 677 |+| Maximum junction temperature | TJMAX | | 150 | | °C | | 677 | ## Materials and finish @@ -128,7 +127,7 @@ As the datasheet states them (page.json `metadata.appearance`; the 3D model's co Data extracted from the manufacturer datasheet, not a distributor listing: -- **Datasheet:** [Microchip Tech datasheet](https://ww1.microchip.com/downloads/aemDocuments/documents/MCU08/ProductDocuments/DataSheets/PIC18-L-F26-45-46K40-Microcontroller-Data-Sheet-DS40001816.pdf) (755 pp, sha256 `e86a60cc739f0fa4`, retrieved 2026-11-16, tier: manufacturer)+- **Datasheet:** [Microchip Tech datasheet](https://ww1.microchip.com/downloads/aemDocuments/documents/MCU08/ProductDocuments/DataSheets/PIC18-L-F26-45-46K40-Microcontroller-Data-Sheet-DS40001816.pdf) (755 pp, sha256 `e86a60cc739f0fa4`, retrieved 2026-11-17, tier: manufacturer) - **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - **CAD:** KiCad official libraries (CC-BY-SA 4.0).
package.json+5−5@@ -1,6 +1,6 @@ { "slug": "pic18f26k40t-i-ss",- "version": "0.1.0",+ "version": "0.2.0", "type": "component", "description": "Microchip Tech Microcontroller Units (MCUs/MPUs/SOCs), SSOP-28-208mil. Pinout settled in review by an AI reviewer against the manufacturer's datasheet, KiCad symbol/footprint/3D.", "tags": [@@ -53,7 +53,7 @@ "mouser": "579-PIC18F26K40TI/SS" }, "distributor_check": {- "checked_at": "2026-11-16T18:17:57Z",+ "checked_at": "2026-11-17T05:57:53Z", "source": "Component Ocean /api/assign-pns", "digikey": { "pn": "PIC18F26K40T-I/SSTR-ND",@@ -272,7 +272,7 @@ "centre_offset_mm": 0.0, "footprint_binding": "identity", "sha256": "7aa76979ae41da44bded1ed74115012868f2f3f5a757faf32bb9df4f92c1e313",- "checked": "2026-11-16",+ "checked": "2026-11-17", "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" }, {@@ -290,8 +290,8 @@ "zmin_mm": 0.0, "centre_offset_mm": 0.0, "footprint_binding": "identity",- "sha256": "7b112356c950bb60303ad8ddd90d5b43739d1a6486dec24f123998d31306d29b",- "checked": "2026-11-16",+ "sha256": "5d420fd7643f2d5c1d8ca6216bc9df4589df7ecbf5367ccef873f5edca82d906",+ "checked": "2026-11-17", "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" } ],
page.json+8−8@@ -4,7 +4,7 @@ "slug": "pic18f26k40t-i-ss", "title": "PIC18F26K40T-I/SS", "brief": "Microchip Tech Microcontroller Units (MCUs/MPUs/SOCs), SSOP-28-208mil. Pinout settled in review by an AI reviewer against the manufacturer's datasheet, KiCad symbol/footprint/3D.",- "version": "0.1.0",+ "version": "0.2.0", "license": "CC-BY-SA-4.0", "tags": [ "component",@@ -36,7 +36,7 @@ "mouser": "579-PIC18F26K40TI/SS" }, "distributor_check": {- "checked_at": "2026-11-16T18:17:57Z",+ "checked_at": "2026-11-17T05:57:53Z", "source": "Component Ocean /api/assign-pns", "digikey": { "pn": "PIC18F26K40T-I/SSTR-ND",@@ -255,7 +255,7 @@ "centre_offset_mm": 0, "footprint_binding": "identity", "sha256": "7aa76979ae41da44bded1ed74115012868f2f3f5a757faf32bb9df4f92c1e313",- "checked": "2026-11-16",+ "checked": "2026-11-17", "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" }, {@@ -273,8 +273,8 @@ "zmin_mm": 0, "centre_offset_mm": 0, "footprint_binding": "identity",- "sha256": "7b112356c950bb60303ad8ddd90d5b43739d1a6486dec24f123998d31306d29b",- "checked": "2026-11-16",+ "sha256": "5d420fd7643f2d5c1d8ca6216bc9df4589df7ecbf5367ccef873f5edca82d906",+ "checked": "2026-11-17", "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" } ],@@ -1060,7 +1060,7 @@ "pic18f26k40t-i-ss-hero.glb", "pic18f26k40t-i-ss-hero.overlay.json" ],- "visibility": {- "public": true- }+ "visibility": "public",+ "description": "Microchip Tech Microcontroller Units (MCUs/MPUs/SOCs), SSOP-28-208mil. Pinout settled in review by an AI reviewer against the manufacturer's datasheet, KiCad symbol/footprint/3D.",+ "org": "adom" }
pic18f26k40t-i-ss-hero.glb⋯ 1 unchanged line ⋯
pic18f26k40t-i-ss-hero.overlay.json+1−1@@ -1,6 +1,6 @@ { "spec": "adom-hero 1.4",- "mpn": "PIC18F26K40T-I",+ "mpn": "PIC18F26K40T-I/SS", "kind": "component + footprint reference art", "board_use": false, "plane_z_mm": -0.02,
pic18f26k40t-i-ss.lbr+14−3@@ -50,7 +50,7 @@ <layer number="98" name="Guide" color="6" fill="1" visible="yes" active="yes"/> </layers> <library>-<description></description>+<description>Microchip Tech Microcontroller Units (MCUs/MPUs/SOCs), SSOP-28-208mil. Pinout settled in review by an AI reviewer against the manufacturer's datasheet</description> <packages> <package name="SSOP-28_5.3x10.2mm_P0.65mm"> <description>SSOP-28, 5.3 x 10.2 mm, 0.65 mm pitch</description>@@ -106,6 +106,7 @@ </packages> <symbols> <symbol name="PIC18F26K40T-I">+ <description>Microchip Tech Microcontroller Units (MCUs/MPUs/SOCs), SSOP-28-208mil. Pinout settled in review by an AI reviewer against the manufacturer's datasheet</description> <wire x1="-17.78" y1="17.78" x2="17.78" y2="17.78" width="0.254" layer="94"/> <wire x1="17.78" y1="17.78" x2="17.78" y2="-20.32" width="0.254" layer="94"/> <wire x1="17.78" y1="-20.32" x2="-17.78" y2="-20.32" width="0.254" layer="94"/>@@ -144,7 +145,7 @@ </symbols> <devicesets> <deviceset name="PIC18F26K40T-I" prefix="U">- <description></description>+ <description>Microchip Tech Microcontroller Units (MCUs/MPUs/SOCs), SSOP-28-208mil. Pinout settled in review by an AI reviewer against the manufacturer's datasheet</description> <gates> <gate name="G$1" symbol="PIC18F26K40T-I" x="0" y="0"/> </gates>@@ -180,7 +181,17 @@ <connect gate="G$1" pin="RC5" pad="16"/> <connect gate="G$1" pin="RC4" pad="15"/> </connects>- <technologies><technology name=""/></technologies>+ <technologies>+ <technology name="">+ <attribute name="MPN" value="PIC18F26K40T-I/SS" constant="no"/>+ <attribute name="MANUFACTURER" value="Microchip Tech" constant="no"/>+ <attribute name="DATASHEET" value="https://ww1.microchip.com/downloads/aemDocuments/documents/MCU08/ProductDocuments/DataSheets/PIC18-L-F26-45-46K40-Microcontroller-Data-Sheet-DS40001816.pdf" constant="no"/>+ <attribute name="ADOM_WIKI" value="https://wiki.adom.inc/adom/pic18f26k40t-i-ss" constant="no"/>+ <attribute name="MOUSER_PN" value="579-PIC18F26K40TI/SS" constant="no"/>+ <attribute name="DIGIKEY_PN" value="PIC18F26K40T-I/SSTR-ND" constant="no"/>+ <attribute name="LCSC_PN" value="C628992" constant="no"/>+ </technology>+ </technologies> </device> </devices> </deviceset>