main
History Download
Ray Publish 0.1.0 74f1ea4

PIC18F26K20-E

Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · QFN-28-EP(6x6)

PIC18F26K20-E from Microchip Tech, in a QFN-28-EP(6x6). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 RA2/AN2/VREF-/CVREF/C2IN+ bidirectional Digital I/O (TTL) that also serves as ADC channel 2, the A/D low reference input VREF-, the comparator reference voltage output CVREF, and the C2 non-inverting input.
2 RA3/AN3/VREF+/C1IN+ bidirectional Digital I/O (TTL) that also serves as ADC channel 3, the A/D high reference input VREF+, and the C1 non-inverting comparator input.
3 RA4/T0CKI/C1OUT bidirectional Schmitt-trigger digital I/O that also serves as the Timer0 external clock input T0CKI and the comparator C1 output C1OUT.
4 RA5/AN4/SS/HLVDIN/C2OUT bidirectional Digital I/O (TTL) that also serves as ADC channel 4, the SPI slave select input SS, the high/low-voltage detect input HLVDIN, and the comparator C2 output C2OUT.
5 VSS power_in Ground reference for logic and I/O pins.
6 OSC1/CLKIN/RA7 input Oscillator crystal or external clock input (CMOS, ST buffer in RC mode); alternatively a digital I/O pin RA7 when not used as oscillator.
7 OSC2/CLKOUT/RA6 bidirectional Oscillator crystal output in crystal modes, CLKOUT (FOSC/4) in RC mode, or general purpose I/O RA6 when not used as oscillator.
8 RC0/T1OSO/T13CKI bidirectional Digital I/O (ST input) that also serves as the Timer1 oscillator output T1OSO and the Timer1/Timer3 external clock input T13CKI.
9 RC1/T1OSI/CCP2 bidirectional Digital I/O (ST input) that also serves as the Timer1 oscillator input T1OSI and the CCP2 capture input/compare output/PWM output (default CCP2 assignment when CCP2MX is set).
10 RC2/CCP1/P1A bidirectional Digital I/O (ST input) that also serves as the CCP1 capture input/compare output and the enhanced CCP1 PWM output P1A.
11 RC3/SCK/SCL bidirectional Digital I/O (ST input) that also serves as the MSSP synchronous serial clock for SPI mode (SCK) and I2C mode (SCL).
12 RC4/SDI/SDA bidirectional Digital I/O (ST input) that also serves as the MSSP SPI data input SDI and the I2C data I/O SDA.
13 RC5/SDO bidirectional Digital I/O (ST input) that also serves as the MSSP SPI data output SDO.
14 RC6/TX/CK bidirectional Digital I/O (ST input) that also serves as the EUSART asynchronous transmit output TX and the synchronous clock CK.
15 RC7/RX/DT bidirectional Digital I/O (ST input) that also serves as the EUSART asynchronous receive input RX and the synchronous data DT.
16 VSS power_in Ground reference for logic and I/O pins.
17 VDD power_in Positive supply for logic and I/O pins.
18 RB0/INT0/FLT0/AN12 bidirectional Digital I/O (TTL) with programmable weak pull-up that also serves as external interrupt 0 INT0, the PWM fault input FLT0 for CCP1, and ADC channel 12.
19 RB1/INT1/AN10/C12IN3-/P1C bidirectional Digital I/O (TTL) with programmable weak pull-up that also serves as external interrupt 1 INT1, ADC channel 10, the comparator C1/C2 inverting input (channel 3), and the ECCP PWM output P1C.
20 RB2/INT2/AN8/P1B bidirectional Digital I/O (TTL) with programmable weak pull-up that also serves as external interrupt 2 INT2, ADC channel 8, and the ECCP PWM output P1B.
21 RB3/AN9/C12IN2-/CCP2 bidirectional Digital I/O (TTL) with programmable weak pull-up that also serves as ADC channel 9, the comparator C1/C2 inverting input (channel 2), and the alternate CCP2 capture/compare/PWM pin when CCP2MX is cleared.
22 RB4/KBI0/AN11/P1D bidirectional Digital I/O (TTL) with programmable weak pull-up that also serves as interrupt-on-change pin KBI0, ADC channel 11, and the ECCP PWM output P1D.
23 RB5/KBI1/PGM bidirectional Digital I/O (TTL) with programmable weak pull-up that also serves as interrupt-on-change pin KBI1 and the low-voltage ICSP programming enable pin PGM.
24 RB6/KBI2/PGC bidirectional Digital I/O (TTL) with programmable weak pull-up that also serves as interrupt-on-change pin KBI2 and the In-Circuit Debugger and ICSP programming clock PGC.
25 RB7/KBI3/PGD bidirectional Digital I/O (TTL) with programmable weak pull-up that also serves as interrupt-on-change pin KBI3 and the In-Circuit Debugger and ICSP programming data pin PGD.
26 MCLR/VPP/RE3 input Active-low Master Clear (device Reset) input when MCLR is enabled, with programming voltage input VPP, and RE3 digital input when MCLR is disabled.
27 RA0/AN0/C12IN0- bidirectional Digital I/O (TTL) that also serves as ADC analog input 0 and the comparator C1/C2 inverting input channel 0.
28 RA1/AN1/C12IN1- bidirectional Digital I/O (TTL) that also serves as ADC analog input 1 and the comparator C1/C2 inverting input channel 1.
29 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package QFN-28-EP(6x6)
Category Single Chip Microcomputer/Microcontroller
Pins 29

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Ambient temperature under bias -40 125 °C 350
Storage temperature -65 150 °C 350
Voltage on VDD pin -0.3 4.5 V 350
Voltage on MCLR 0 11 V MCLR pin 350
Total power dissipation 1 W 350
Maximum current out of VSS pin 350 mA -40°C to +85°C for industrial, PIC18F2XK20/4XK20 350
Maximum current out of VSS pin 120 mA +85°C to +125°C for extended, PIC18F2XK20/4XK20 350
Maximum current into VDD pin 250 mA -40°C to +85°C for industrial, PIC18F2XK20 350
Maximum current into VDD pin 85 mA +85°C to +125°C for extended, PIC18F2XK20 350
Input clamp current IIK 20 mA VI < 0 or VI > VDD 350
Maximum output current sunk by any I/O pin 50 mA 350
Maximum output current sourced by any I/O pin 50 mA 350
VDDMIN (Fosc <= 16 MHz) VDD 1.8 V Fosc <= 16 MHz 351
VDDMIN (Fosc <= 20 MHz) VDD 2 V Fosc <= 20 MHz 351
VDDMIN (Fosc <= 48 MHz, Extended Temperature) VDD 3 V Fosc <= 48 MHz, Extended Temperature 351
VDDMIN (Fosc <= 64 MHz, Industrial Temperature) VDD 3 V Fosc <= 64 MHz, Industrial Temperature 351
VDDMAX VDD 3.6 V 351
TA_MIN industrial TA -40 °C Industrial Temperature 351
TA_MAX industrial TA 85 °C Industrial Temperature 351
TA_MAX extended TA 125 °C Extended Temperature 351
VDD Supply Voltage VDD 1.8 3.6 V 353
RAM Data Retention Voltage VDR 1.5 V 353
VDD Start Voltage to ensure internal Power-on Reset signal VPOR 0.7 V See section on Power-on Reset for details 353
VDD Rise Rate to ensure internal Power-on Reset signal SVDD 0.05 V/ms See section on Power-on Reset for details 353
Brown-out Reset Voltage VBOR 1.72 1.82 1.95 V BORV<1:0> = 11 353
Brown-out Reset Voltage VBOR 2.15 2.27 2.4 V BORV<1:0> = 10 353
Brown-out Reset Voltage VBOR 2.65 2.75 2.9 V BORV<1:0> = 01 353
Brown-out Reset Voltage VBOR 2.98 3.08 3.25 V BORV<1:0> = 00 353
Power-down Current (IPD) IPD 0.05 1 A -40°C, VDD = 1.8V, Sleep mode 353
Power-down Current (IPD) IPD 0.6 3 A +85°C, VDD = 1.8V, Sleep mode 353
Power-down Current (IPD) IPD 4 20 A +125°C, VDD = 1.8V, Sleep mode 353
Power-down Current (IPD) IPD 0.1 1 A -40°C, VDD = 3.0V, Sleep mode 353
Power-down Current (IPD) IPD 0.7 3 A +85°C, VDD = 3.0V, Sleep mode 353
Power-down Current (IPD) IPD 5 20 A +125°C, VDD = 3.0V, Sleep mode 353
Supply Current (IDD) RC_RUN LFINTOSC IDD 5.5 9 A -40°C, VDD = 1.8V, FOSC = 31 kHz (RC_RUN, LFINTOSC) 354
Supply Current (IDD) RC_RUN LFINTOSC IDD 6 10 A +25°C, VDD = 1.8V, FOSC = 31 kHz (RC_RUN, LFINTOSC) 354
Supply Current (IDD) RC_RUN LFINTOSC IDD 6.5 14 A +85°C, VDD = 1.8V, FOSC = 31 kHz (RC_RUN, LFINTOSC) 354
Supply Current (IDD) RC_RUN LFINTOSC IDD 9 30 A +125°C, VDD = 1.8V, FOSC = 31 kHz (RC_RUN, LFINTOSC) 354
Supply Current (IDD) RC_RUN LFINTOSC IDD 10 15 A -40°C, VDD = 3.0V, FOSC = 31 kHz (RC_RUN, LFINTOSC) 354
Supply Current (IDD) RC_RUN LFINTOSC IDD 10.5 16 A +25°C, VDD = 3.0V, FOSC = 31 kHz (RC_RUN, LFINTOSC) 354
Supply Current (IDD) RC_RUN LFINTOSC IDD 11 20 A +85°C, VDD = 3.0V, FOSC = 31 kHz (RC_RUN, LFINTOSC) 354
Supply Current (IDD) RC_RUN LFINTOSC IDD 14 40 A +125°C, VDD = 3.0V, FOSC = 31 kHz (RC_RUN, LFINTOSC) 354
Supply Current (IDD) RC_RUN HF-INTOSC IDD 0.4 0.5 mA -40°C to +125°C, VDD = 1.8V, FOSC = 1 MHz (RC_RUN, HF-INTOSC) 354
Supply Current (IDD) RC_RUN HF-INTOSC IDD 0.6 0.8 mA -40°C to +125°C, VDD = 3.0V, FOSC = 1 MHz (RC_RUN, HF-INTOSC) 354
Supply Current (IDD) RC_RUN HF-INTOSC IDD 2.2 3 mA -40°C to +125°C, VDD = 1.8V, FOSC = 16 MHz (RC_RUN, HF-INTOSC) 354
Supply Current (IDD) RC_RUN HF-INTOSC IDD 3.8 4.4 mA -40°C to +125°C, VDD = 3.0V, FOSC = 16 MHz (RC_RUN, HF-INTOSC) 354
Supply Current (IDD) PRI_RUN EC oscillator IDD 0.25 0.45 mA -40°C to +125°C, VDD = 1.8V, FOSC = 1 MHz (PRI_RUN, EC oscillator) 356
Supply Current (IDD) PRI_RUN EC oscillator IDD 0.5 0.75 mA -40°C to +125°C, VDD = 3.0V (PRI_RUN, EC oscillator) 356
Supply Current (IDD) PRI_RUN EC oscillator IDD 2.7 3.2 mA -40°C to +125°C, VDD = 2V, FOSC = 20 MHz (PRI_RUN, EC oscillator) 356
Supply Current (IDD) PRI_RUN EC oscillator IDD 4.3 5 mA -40°C to +125°C, VDD = 3.0V (PRI_RUN, EC oscillator) 356
Supply Current (IDD) 16 MHz Internal PRI_RUN HS+PLL IDD 2.1 2.9 mA -40°C to +125°C, VDD = 1.8V, FOSC = 4 MHz (PRI_RUN HS+PLL) 356
PORTB weak pull-up current IPURB 50 90 400 A AVDD = 3.0V, VPIN = VSS 360

CAD (KiCad official)

  • Symbol: PIC18F26K20-E
  • Footprint: Package_DFN_QFN:QFN-28-1EP_6x6mm_P0.65mm_EP4.8x4.8mm
  • 3D model: QFN-28-EP(6x6) (KiCad packages3D, STEP)
  • 3D model files: pic18f26k20-e-etched.step / pic18f26k20-e-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pic18f26k20-e.step / pic18f26k20-e.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (440 pp, sha256 4e7e234c713a2325, retrieved 2026-10-28, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF