Generated by kicad-footprint-generator · KiCad file format 20260206
PIC18F26K20-E
Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · QFN-28-EP(6x6)
PIC18F26K20-E from Microchip Tech, in a QFN-28-EP(6x6). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RA2/AN2/VREF-/CVREF/C2IN+ | bidirectional | Digital I/O (TTL) that also serves as ADC channel 2, the A/D low reference input VREF-, the comparator reference voltage output CVREF, and the C2 non-inverting input. |
| 2 | RA3/AN3/VREF+/C1IN+ | bidirectional | Digital I/O (TTL) that also serves as ADC channel 3, the A/D high reference input VREF+, and the C1 non-inverting comparator input. |
| 3 | RA4/T0CKI/C1OUT | bidirectional | Schmitt-trigger digital I/O that also serves as the Timer0 external clock input T0CKI and the comparator C1 output C1OUT. |
| 4 | RA5/AN4/SS/HLVDIN/C2OUT | bidirectional | Digital I/O (TTL) that also serves as ADC channel 4, the SPI slave select input SS, the high/low-voltage detect input HLVDIN, and the comparator C2 output C2OUT. |
| 5 | VSS | power_in | Ground reference for logic and I/O pins. |
| 6 | OSC1/CLKIN/RA7 | input | Oscillator crystal or external clock input (CMOS, ST buffer in RC mode); alternatively a digital I/O pin RA7 when not used as oscillator. |
| 7 | OSC2/CLKOUT/RA6 | bidirectional | Oscillator crystal output in crystal modes, CLKOUT (FOSC/4) in RC mode, or general purpose I/O RA6 when not used as oscillator. |
| 8 | RC0/T1OSO/T13CKI | bidirectional | Digital I/O (ST input) that also serves as the Timer1 oscillator output T1OSO and the Timer1/Timer3 external clock input T13CKI. |
| 9 | RC1/T1OSI/CCP2 | bidirectional | Digital I/O (ST input) that also serves as the Timer1 oscillator input T1OSI and the CCP2 capture input/compare output/PWM output (default CCP2 assignment when CCP2MX is set). |
| 10 | RC2/CCP1/P1A | bidirectional | Digital I/O (ST input) that also serves as the CCP1 capture input/compare output and the enhanced CCP1 PWM output P1A. |
| 11 | RC3/SCK/SCL | bidirectional | Digital I/O (ST input) that also serves as the MSSP synchronous serial clock for SPI mode (SCK) and I2C mode (SCL). |
| 12 | RC4/SDI/SDA | bidirectional | Digital I/O (ST input) that also serves as the MSSP SPI data input SDI and the I2C data I/O SDA. |
| 13 | RC5/SDO | bidirectional | Digital I/O (ST input) that also serves as the MSSP SPI data output SDO. |
| 14 | RC6/TX/CK | bidirectional | Digital I/O (ST input) that also serves as the EUSART asynchronous transmit output TX and the synchronous clock CK. |
| 15 | RC7/RX/DT | bidirectional | Digital I/O (ST input) that also serves as the EUSART asynchronous receive input RX and the synchronous data DT. |
| 16 | VSS | power_in | Ground reference for logic and I/O pins. |
| 17 | VDD | power_in | Positive supply for logic and I/O pins. |
| 18 | RB0/INT0/FLT0/AN12 | bidirectional | Digital I/O (TTL) with programmable weak pull-up that also serves as external interrupt 0 INT0, the PWM fault input FLT0 for CCP1, and ADC channel 12. |
| 19 | RB1/INT1/AN10/C12IN3-/P1C | bidirectional | Digital I/O (TTL) with programmable weak pull-up that also serves as external interrupt 1 INT1, ADC channel 10, the comparator C1/C2 inverting input (channel 3), and the ECCP PWM output P1C. |
| 20 | RB2/INT2/AN8/P1B | bidirectional | Digital I/O (TTL) with programmable weak pull-up that also serves as external interrupt 2 INT2, ADC channel 8, and the ECCP PWM output P1B. |
| 21 | RB3/AN9/C12IN2-/CCP2 | bidirectional | Digital I/O (TTL) with programmable weak pull-up that also serves as ADC channel 9, the comparator C1/C2 inverting input (channel 2), and the alternate CCP2 capture/compare/PWM pin when CCP2MX is cleared. |
| 22 | RB4/KBI0/AN11/P1D | bidirectional | Digital I/O (TTL) with programmable weak pull-up that also serves as interrupt-on-change pin KBI0, ADC channel 11, and the ECCP PWM output P1D. |
| 23 | RB5/KBI1/PGM | bidirectional | Digital I/O (TTL) with programmable weak pull-up that also serves as interrupt-on-change pin KBI1 and the low-voltage ICSP programming enable pin PGM. |
| 24 | RB6/KBI2/PGC | bidirectional | Digital I/O (TTL) with programmable weak pull-up that also serves as interrupt-on-change pin KBI2 and the In-Circuit Debugger and ICSP programming clock PGC. |
| 25 | RB7/KBI3/PGD | bidirectional | Digital I/O (TTL) with programmable weak pull-up that also serves as interrupt-on-change pin KBI3 and the In-Circuit Debugger and ICSP programming data pin PGD. |
| 26 | MCLR/VPP/RE3 | input | Active-low Master Clear (device Reset) input when MCLR is enabled, with programming voltage input VPP, and RE3 digital input when MCLR is disabled. |
| 27 | RA0/AN0/C12IN0- | bidirectional | Digital I/O (TTL) that also serves as ADC analog input 0 and the comparator C1/C2 inverting input channel 0. |
| 28 | RA1/AN1/C12IN1- | bidirectional | Digital I/O (TTL) that also serves as ADC analog input 1 and the comparator C1/C2 inverting input channel 1. |
| 29 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | QFN-28-EP(6x6) |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 29 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Ambient temperature under bias | -40 | 125 | °C | 350 | |||
| Storage temperature | -65 | 150 | °C | 350 | |||
| Voltage on VDD pin | -0.3 | 4.5 | V | 350 | |||
| Voltage on MCLR | 0 | 11 | V | MCLR pin | 350 | ||
| Total power dissipation | 1 | W | 350 | ||||
| Maximum current out of VSS pin | 350 | mA | -40°C to +85°C for industrial, PIC18F2XK20/4XK20 | 350 | |||
| Maximum current out of VSS pin | 120 | mA | +85°C to +125°C for extended, PIC18F2XK20/4XK20 | 350 | |||
| Maximum current into VDD pin | 250 | mA | -40°C to +85°C for industrial, PIC18F2XK20 | 350 | |||
| Maximum current into VDD pin | 85 | mA | +85°C to +125°C for extended, PIC18F2XK20 | 350 | |||
| Input clamp current | IIK | 20 | mA | VI < 0 or VI > VDD | 350 | ||
| Maximum output current sunk by any I/O pin | 50 | mA | 350 | ||||
| Maximum output current sourced by any I/O pin | 50 | mA | 350 | ||||
| VDDMIN (Fosc <= 16 MHz) | VDD | 1.8 | V | Fosc <= 16 MHz | 351 | ||
| VDDMIN (Fosc <= 20 MHz) | VDD | 2 | V | Fosc <= 20 MHz | 351 | ||
| VDDMIN (Fosc <= 48 MHz, Extended Temperature) | VDD | 3 | V | Fosc <= 48 MHz, Extended Temperature | 351 | ||
| VDDMIN (Fosc <= 64 MHz, Industrial Temperature) | VDD | 3 | V | Fosc <= 64 MHz, Industrial Temperature | 351 | ||
| VDDMAX | VDD | 3.6 | V | 351 | |||
| TA_MIN industrial | TA | -40 | °C | Industrial Temperature | 351 | ||
| TA_MAX industrial | TA | 85 | °C | Industrial Temperature | 351 | ||
| TA_MAX extended | TA | 125 | °C | Extended Temperature | 351 | ||
| VDD Supply Voltage | VDD | 1.8 | 3.6 | V | 353 | ||
| RAM Data Retention Voltage | VDR | 1.5 | V | 353 | |||
| VDD Start Voltage to ensure internal Power-on Reset signal | VPOR | 0.7 | V | See section on Power-on Reset for details | 353 | ||
| VDD Rise Rate to ensure internal Power-on Reset signal | SVDD | 0.05 | V/ms | See section on Power-on Reset for details | 353 | ||
| Brown-out Reset Voltage | VBOR | 1.72 | 1.82 | 1.95 | V | BORV<1:0> = 11 | 353 |
| Brown-out Reset Voltage | VBOR | 2.15 | 2.27 | 2.4 | V | BORV<1:0> = 10 | 353 |
| Brown-out Reset Voltage | VBOR | 2.65 | 2.75 | 2.9 | V | BORV<1:0> = 01 | 353 |
| Brown-out Reset Voltage | VBOR | 2.98 | 3.08 | 3.25 | V | BORV<1:0> = 00 | 353 |
| Power-down Current (IPD) | IPD | 0.05 | 1 | A | -40°C, VDD = 1.8V, Sleep mode | 353 | |
| Power-down Current (IPD) | IPD | 0.6 | 3 | A | +85°C, VDD = 1.8V, Sleep mode | 353 | |
| Power-down Current (IPD) | IPD | 4 | 20 | A | +125°C, VDD = 1.8V, Sleep mode | 353 | |
| Power-down Current (IPD) | IPD | 0.1 | 1 | A | -40°C, VDD = 3.0V, Sleep mode | 353 | |
| Power-down Current (IPD) | IPD | 0.7 | 3 | A | +85°C, VDD = 3.0V, Sleep mode | 353 | |
| Power-down Current (IPD) | IPD | 5 | 20 | A | +125°C, VDD = 3.0V, Sleep mode | 353 | |
| Supply Current (IDD) RC_RUN LFINTOSC | IDD | 5.5 | 9 | A | -40°C, VDD = 1.8V, FOSC = 31 kHz (RC_RUN, LFINTOSC) | 354 | |
| Supply Current (IDD) RC_RUN LFINTOSC | IDD | 6 | 10 | A | +25°C, VDD = 1.8V, FOSC = 31 kHz (RC_RUN, LFINTOSC) | 354 | |
| Supply Current (IDD) RC_RUN LFINTOSC | IDD | 6.5 | 14 | A | +85°C, VDD = 1.8V, FOSC = 31 kHz (RC_RUN, LFINTOSC) | 354 | |
| Supply Current (IDD) RC_RUN LFINTOSC | IDD | 9 | 30 | A | +125°C, VDD = 1.8V, FOSC = 31 kHz (RC_RUN, LFINTOSC) | 354 | |
| Supply Current (IDD) RC_RUN LFINTOSC | IDD | 10 | 15 | A | -40°C, VDD = 3.0V, FOSC = 31 kHz (RC_RUN, LFINTOSC) | 354 | |
| Supply Current (IDD) RC_RUN LFINTOSC | IDD | 10.5 | 16 | A | +25°C, VDD = 3.0V, FOSC = 31 kHz (RC_RUN, LFINTOSC) | 354 | |
| Supply Current (IDD) RC_RUN LFINTOSC | IDD | 11 | 20 | A | +85°C, VDD = 3.0V, FOSC = 31 kHz (RC_RUN, LFINTOSC) | 354 | |
| Supply Current (IDD) RC_RUN LFINTOSC | IDD | 14 | 40 | A | +125°C, VDD = 3.0V, FOSC = 31 kHz (RC_RUN, LFINTOSC) | 354 | |
| Supply Current (IDD) RC_RUN HF-INTOSC | IDD | 0.4 | 0.5 | mA | -40°C to +125°C, VDD = 1.8V, FOSC = 1 MHz (RC_RUN, HF-INTOSC) | 354 | |
| Supply Current (IDD) RC_RUN HF-INTOSC | IDD | 0.6 | 0.8 | mA | -40°C to +125°C, VDD = 3.0V, FOSC = 1 MHz (RC_RUN, HF-INTOSC) | 354 | |
| Supply Current (IDD) RC_RUN HF-INTOSC | IDD | 2.2 | 3 | mA | -40°C to +125°C, VDD = 1.8V, FOSC = 16 MHz (RC_RUN, HF-INTOSC) | 354 | |
| Supply Current (IDD) RC_RUN HF-INTOSC | IDD | 3.8 | 4.4 | mA | -40°C to +125°C, VDD = 3.0V, FOSC = 16 MHz (RC_RUN, HF-INTOSC) | 354 | |
| Supply Current (IDD) PRI_RUN EC oscillator | IDD | 0.25 | 0.45 | mA | -40°C to +125°C, VDD = 1.8V, FOSC = 1 MHz (PRI_RUN, EC oscillator) | 356 | |
| Supply Current (IDD) PRI_RUN EC oscillator | IDD | 0.5 | 0.75 | mA | -40°C to +125°C, VDD = 3.0V (PRI_RUN, EC oscillator) | 356 | |
| Supply Current (IDD) PRI_RUN EC oscillator | IDD | 2.7 | 3.2 | mA | -40°C to +125°C, VDD = 2V, FOSC = 20 MHz (PRI_RUN, EC oscillator) | 356 | |
| Supply Current (IDD) PRI_RUN EC oscillator | IDD | 4.3 | 5 | mA | -40°C to +125°C, VDD = 3.0V (PRI_RUN, EC oscillator) | 356 | |
| Supply Current (IDD) 16 MHz Internal PRI_RUN HS+PLL | IDD | 2.1 | 2.9 | mA | -40°C to +125°C, VDD = 1.8V, FOSC = 4 MHz (PRI_RUN HS+PLL) | 356 | |
| PORTB weak pull-up current | IPURB | 50 | 90 | 400 | A | AVDD = 3.0V, VPIN = VSS | 360 |
CAD (KiCad official)
- Symbol:
PIC18F26K20-E - Footprint:
Package_DFN_QFN:QFN-28-1EP_6x6mm_P0.65mm_EP4.8x4.8mm - 3D model: QFN-28-EP(6x6) (KiCad packages3D, STEP)
- 3D model files:
pic18f26k20-e-etched.step/pic18f26k20-e-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic18f26k20-e.step/pic18f26k20-e.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (440 pp, sha256
4e7e234c713a2325, retrieved 2026-10-28, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).