main
Ray
Publish 0.1.0
8059278
PIC18F26J13-I
Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · SOIC-28-300mil
PIC18F26J13-I from Microchip Tech, in a SOIC-28-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | MCLR | input | Active-low Master Clear (Reset) input to the device; it is a 5.5V tolerant input. |
| 2 | RA0 | bidirectional | PORTA<0> digital I/O, also analog input AN0, Comparator 1 Input A, ultra low-power wake-up input ULPWU and remappable pin RP0; PORTA pins have TTL input levels and full CMOS output drivers. |
| 3 | RA1 | bidirectional | PORTA<1> digital I/O, also analog input AN1, Comparator 2 Input A, band gap reference output VBG, CTMU pulse delay input CTDIN and remappable pin RP1. |
| 4 | RA2 | bidirectional | PORTA<2> digital I/O, also analog input AN2, Comparator inputs C2INB/C1IND/C3INB, A/D and comparator voltage reference low input VREF-, and comparator voltage reference output CVREF. |
| 5 | RA3 | bidirectional | PORTA<3> digital I/O, also analog input AN3, Comparator 1 Input B and A/D and comparator voltage reference high input VREF+. |
| 6 | VDDCORE/VCAP | power_in | Core logic power supply VDDCORE when the regulator is disabled (LF parts), or external filter capacitor connection VCAP when the regulator is enabled (F parts). |
| 7 | RA5 | bidirectional | PORTA<5> digital I/O, also analog input AN4, Comparator 1 Input C, SPI slave select input SS1, High/Low-Voltage Detect input HLVDIN and remappable pin RP2. |
| 8 | VSS1 | power_in | Ground reference for logic and I/O pins. |
| 9 | OSC1/CLKI/RA7 | input | Oscillator crystal or external clock input (OSC1/CLKI, ST buffer in RC mode, CMOS otherwise); RA7 is disabled when OSC1 is used for the clock function. |
| 10 | OSC2/CLKO/RA6 | output | Oscillator crystal output connecting to the crystal or resonator in crystal mode, or CLKO (FOSC/4) in RC mode; RA6 is disabled when OSC2 is used for the clock function. |
| 11 | RC0 | bidirectional | PORTC<0> digital I/O, also Timer1 oscillator output T1OSO, Timer1 digital clock input T1CKI and remappable pin RP11. |
| 12 | RC1 | bidirectional | PORTC<1> digital I/O, also CCP8 capture/compare/PWM input/output, Timer1 oscillator input T1OSI and remappable pin RP12. |
| 13 | RC2 | bidirectional | PORTC<2> digital I/O, also analog input AN11, Comparator 2 Input D, CTMU pulse generator output CTPLS and remappable pin RP13. |
| 14 | RC3 | bidirectional | PORTC<3> digital I/O, also SPI clock SCK1, I2C clock SCL1 (MSSP1) and remappable pin RP14. |
| 15 | RC4 | bidirectional | PORTC<4> digital I/O, also SPI data input SDI1, I2C data SDA1 (MSSP1) and remappable pin RP15. |
| 16 | RC5 | bidirectional | PORTC<5> digital I/O, also SPI data output SDO1 and remappable pin RP16. |
| 17 | RC6 | bidirectional | PORTC<6> digital I/O, also CCP9, EUSART1 asynchronous transmit TX1, synchronous clock CK1 and remappable pin RP17; this pin is 5.5V tolerant. |
| 18 | RC7 | bidirectional | PORTC<7> digital I/O, also CCP10, EUSART1 asynchronous receive RX1, synchronous data DT1 and remappable pin RP18; this pin is 5.5V tolerant. |
| 19 | VSS2 | power_in | Ground reference for logic and I/O pins. |
| 20 | VDD | power_in | Positive supply for peripheral digital logic and I/O pins. |
| 21 | RB0 | bidirectional | PORTB<0> digital I/O with weak pull-up when RBPU is cleared, also analog input AN12, Comparator 3 Input D, external interrupt INT0 and remappable pin RP3. |
| 22 | RB1 | bidirectional | PORTB<1> digital I/O with weak pull-up when RBPU is cleared, also analog input AN10, Comparator 3 Input C, Real-Time Clock Calendar output RTCC and remappable pin RP4. |
| 23 | RB2 | bidirectional | PORTB<2> digital I/O with weak pull-up when RBPU is cleared, also analog input AN8, Comparator 2 Input C, CTMU Edge 1 input CTED1, reference output clock REFO and remappable pin RP5. |
| 24 | RB3 | bidirectional | PORTB<3> digital I/O with weak pull-up when RBPU is cleared, also analog input AN9, Comparator 3 Input A, CTMU Edge 2 input CTED2 and remappable pin RP6. |
| 25 | RB4 | bidirectional | PORTB<4> digital I/O with weak pull-up and interrupt-on-change input KBI0, also CCP4 capture/compare/PWM input/output, I2C clock SCL2 (MSSP2) and remappable pin RP7; this pin is 5.5V tolerant. |
| 26 | RB5 | bidirectional | PORTB<5> digital I/O with weak pull-up and interrupt-on-change input KBI1, also CCP5, I2C data SDA2 (MSSP2) and remappable pin RP8; this pin is 5.5V tolerant. |
| 27 | RB6 | bidirectional | PORTB<6> digital I/O with weak pull-up and interrupt-on-change input KBI2, also CCP6, ICSP clock input PGC and remappable pin RP9; this pin is 5.5V tolerant. |
| 28 | RB7 | bidirectional | PORTB<7> digital I/O with weak pull-up and interrupt-on-change input KBI3, also CCP7, ICSP/ICD data pin PGD and remappable pin RP10; this pin is 5.5V tolerant. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOIC-28-300mil |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 28 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating voltage VDD (F device, regulator enabled) | VDD | 2.15 | 3.6 | V | PIC18F26J13 (F part, on-chip regulator enabled) | 9 | |
| Internal oscillator frequency tolerance (tunable INTOSC, 31 kHz to 8 MHz) | -1 | 1 | % | Tunable internal oscillator 31 kHz to 8 MHz | 1 | ||
| Operating frequency | 48 | MHz | Device feature table, PIC18F26J13 (DC to 48 MHz) | 10 | |||
| Flash program memory erase/write endurance | 10000 | erase/write cycles | Flash program memory, minimum | 1 | |||
| Flash data retention | 20 | years | Flash program memory, minimum | 1 | |||
| VCAP/VDDCORE capacitor ESR | 5 | Ω | Low-ESR capacitor on VCAP/VDDCORE, F devices | 29 | |||
| Digital-only input pin voltage tolerance | 5.5 | V | Digital-only pins, 5.5V tolerant inputs | 1 | |||
| On-chip regulator output (VDDCORE) nominal | VDDCORE | 2.5 | V | F device regulator output, nominal | 413 | ||
| Regulator tracking-mode voltage drop | 100 | mV | Regulator in Tracking mode (VDD below regulation point), typical drop of 100 mV or less | 413 | |||
| VCAP/VDDCORE filter capacitor | CEFC | 10 | µF | Capacitor from VCAP/VDDCORE to ground, F devices | 29 |
CAD (KiCad official)
- Symbol:
PIC18F26J13-I - Footprint:
Package_SO:SOIC-28W_7.5x17.9mm_P1.27mm - 3D model: SOIC-28-300mil (KiCad packages3D, STEP)
- 3D model files:
pic18f26j13-i-etched.step/pic18f26j13-i-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic18f26j13-i.step/pic18f26j13-i.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (537 pp, sha256
961e405e1ed75010, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# PIC18F26J13-I
**Microchip Tech** · Microcontroller Units (MCUs/MPUs/SOCs) · SOIC-28-300mil
PIC18F26J13-I from Microchip Tech, in a SOIC-28-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | MCLR | input | Active-low Master Clear (Reset) input to the device; it is a 5.5V tolerant input. |
| 2 | RA0 | bidirectional | PORTA<0> digital I/O, also analog input AN0, Comparator 1 Input A, ultra low-power wake-up input ULPWU and remappable pin RP0; PORTA pins have TTL input levels and full CMOS output drivers. |
| 3 | RA1 | bidirectional | PORTA<1> digital I/O, also analog input AN1, Comparator 2 Input A, band gap reference output VBG, CTMU pulse delay input CTDIN and remappable pin RP1. |
| 4 | RA2 | bidirectional | PORTA<2> digital I/O, also analog input AN2, Comparator inputs C2INB/C1IND/C3INB, A/D and comparator voltage reference low input VREF-, and comparator voltage reference output CVREF. |
| 5 | RA3 | bidirectional | PORTA<3> digital I/O, also analog input AN3, Comparator 1 Input B and A/D and comparator voltage reference high input VREF+. |
| 6 | VDDCORE/VCAP | power_in | Core logic power supply VDDCORE when the regulator is disabled (LF parts), or external filter capacitor connection VCAP when the regulator is enabled (F parts). |
| 7 | RA5 | bidirectional | PORTA<5> digital I/O, also analog input AN4, Comparator 1 Input C, SPI slave select input SS1, High/Low-Voltage Detect input HLVDIN and remappable pin RP2. |
| 8 | VSS1 | power_in | Ground reference for logic and I/O pins. |
| 9 | OSC1/CLKI/RA7 | input | Oscillator crystal or external clock input (OSC1/CLKI, ST buffer in RC mode, CMOS otherwise); RA7 is disabled when OSC1 is used for the clock function. |
| 10 | OSC2/CLKO/RA6 | output | Oscillator crystal output connecting to the crystal or resonator in crystal mode, or CLKO (FOSC/4) in RC mode; RA6 is disabled when OSC2 is used for the clock function. |
| 11 | RC0 | bidirectional | PORTC<0> digital I/O, also Timer1 oscillator output T1OSO, Timer1 digital clock input T1CKI and remappable pin RP11. |
| 12 | RC1 | bidirectional | PORTC<1> digital I/O, also CCP8 capture/compare/PWM input/output, Timer1 oscillator input T1OSI and remappable pin RP12. |
| 13 | RC2 | bidirectional | PORTC<2> digital I/O, also analog input AN11, Comparator 2 Input D, CTMU pulse generator output CTPLS and remappable pin RP13. |
| 14 | RC3 | bidirectional | PORTC<3> digital I/O, also SPI clock SCK1, I2C clock SCL1 (MSSP1) and remappable pin RP14. |
| 15 | RC4 | bidirectional | PORTC<4> digital I/O, also SPI data input SDI1, I2C data SDA1 (MSSP1) and remappable pin RP15. |
| 16 | RC5 | bidirectional | PORTC<5> digital I/O, also SPI data output SDO1 and remappable pin RP16. |
| 17 | RC6 | bidirectional | PORTC<6> digital I/O, also CCP9, EUSART1 asynchronous transmit TX1, synchronous clock CK1 and remappable pin RP17; this pin is 5.5V tolerant. |
| 18 | RC7 | bidirectional | PORTC<7> digital I/O, also CCP10, EUSART1 asynchronous receive RX1, synchronous data DT1 and remappable pin RP18; this pin is 5.5V tolerant. |
| 19 | VSS2 | power_in | Ground reference for logic and I/O pins. |
| 20 | VDD | power_in | Positive supply for peripheral digital logic and I/O pins. |
| 21 | RB0 | bidirectional | PORTB<0> digital I/O with weak pull-up when RBPU is cleared, also analog input AN12, Comparator 3 Input D, external interrupt INT0 and remappable pin RP3. |
| 22 | RB1 | bidirectional | PORTB<1> digital I/O with weak pull-up when RBPU is cleared, also analog input AN10, Comparator 3 Input C, Real-Time Clock Calendar output RTCC and remappable pin RP4. |
| 23 | RB2 | bidirectional | PORTB<2> digital I/O with weak pull-up when RBPU is cleared, also analog input AN8, Comparator 2 Input C, CTMU Edge 1 input CTED1, reference output clock REFO and remappable pin RP5. |
| 24 | RB3 | bidirectional | PORTB<3> digital I/O with weak pull-up when RBPU is cleared, also analog input AN9, Comparator 3 Input A, CTMU Edge 2 input CTED2 and remappable pin RP6. |
| 25 | RB4 | bidirectional | PORTB<4> digital I/O with weak pull-up and interrupt-on-change input KBI0, also CCP4 capture/compare/PWM input/output, I2C clock SCL2 (MSSP2) and remappable pin RP7; this pin is 5.5V tolerant. |
| 26 | RB5 | bidirectional | PORTB<5> digital I/O with weak pull-up and interrupt-on-change input KBI1, also CCP5, I2C data SDA2 (MSSP2) and remappable pin RP8; this pin is 5.5V tolerant. |
| 27 | RB6 | bidirectional | PORTB<6> digital I/O with weak pull-up and interrupt-on-change input KBI2, also CCP6, ICSP clock input PGC and remappable pin RP9; this pin is 5.5V tolerant. |
| 28 | RB7 | bidirectional | PORTB<7> digital I/O with weak pull-up and interrupt-on-change input KBI3, also CCP7, ICSP/ICD data pin PGD and remappable pin RP10; this pin is 5.5V tolerant. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOIC-28-300mil |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 28 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating voltage VDD (F device, regulator enabled) | VDD | 2.15 | | 3.6 | V | PIC18F26J13 (F part, on-chip regulator enabled) | 9 |
| Internal oscillator frequency tolerance (tunable INTOSC, 31 kHz to 8 MHz) | | -1 | | 1 | % | Tunable internal oscillator 31 kHz to 8 MHz | 1 |
| Operating frequency | | | | 48 | MHz | Device feature table, PIC18F26J13 (DC to 48 MHz) | 10 |
| Flash program memory erase/write endurance | | 10000 | | | erase/write cycles | Flash program memory, minimum | 1 |
| Flash data retention | | 20 | | | years | Flash program memory, minimum | 1 |
| VCAP/VDDCORE capacitor ESR | | | | 5 | Ω | Low-ESR capacitor on VCAP/VDDCORE, F devices | 29 |
| Digital-only input pin voltage tolerance | | | | 5.5 | V | Digital-only pins, 5.5V tolerant inputs | 1 |
| On-chip regulator output (VDDCORE) nominal | VDDCORE | | 2.5 | | V | F device regulator output, nominal | 413 |
| Regulator tracking-mode voltage drop | | | 100 | | mV | Regulator in Tracking mode (VDD below regulation point), typical drop of 100 mV or less | 413 |
| VCAP/VDDCORE filter capacitor | CEFC | | 10 | | µF | Capacitor from VCAP/VDDCORE to ground, F devices | 29 |
## CAD (KiCad official)
- Symbol: `PIC18F26J13-I`
- Footprint: `Package_SO:SOIC-28W_7.5x17.9mm_P1.27mm`
- 3D model: SOIC-28-300mil (KiCad packages3D, STEP)
- 3D model files: `pic18f26j13-i-etched.step` / `pic18f26j13-i-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `pic18f26j13-i.step` / `pic18f26j13-i.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Microchip Tech datasheet](https://ww1.microchip.com/downloads/en/DeviceDoc/30009974C.pdf) (537 pp, sha256 `961e405e1ed75010`, retrieved 2026-10-30, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/pic18f26j13-i-datasheet.pdf)