Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

PIC18F26J13-I

Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · SOIC-28-300mil

PIC18F26J13-I from Microchip Tech, in a SOIC-28-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 MCLR input Active-low Master Clear (Reset) input to the device; it is a 5.5V tolerant input.
2 RA0 bidirectional PORTA<0> digital I/O, also analog input AN0, Comparator 1 Input A, ultra low-power wake-up input ULPWU and remappable pin RP0; PORTA pins have TTL input levels and full CMOS output drivers.
3 RA1 bidirectional PORTA<1> digital I/O, also analog input AN1, Comparator 2 Input A, band gap reference output VBG, CTMU pulse delay input CTDIN and remappable pin RP1.
4 RA2 bidirectional PORTA<2> digital I/O, also analog input AN2, Comparator inputs C2INB/C1IND/C3INB, A/D and comparator voltage reference low input VREF-, and comparator voltage reference output CVREF.
5 RA3 bidirectional PORTA<3> digital I/O, also analog input AN3, Comparator 1 Input B and A/D and comparator voltage reference high input VREF+.
6 VDDCORE/VCAP power_in Core logic power supply VDDCORE when the regulator is disabled (LF parts), or external filter capacitor connection VCAP when the regulator is enabled (F parts).
7 RA5 bidirectional PORTA<5> digital I/O, also analog input AN4, Comparator 1 Input C, SPI slave select input SS1, High/Low-Voltage Detect input HLVDIN and remappable pin RP2.
8 VSS1 power_in Ground reference for logic and I/O pins.
9 OSC1/CLKI/RA7 input Oscillator crystal or external clock input (OSC1/CLKI, ST buffer in RC mode, CMOS otherwise); RA7 is disabled when OSC1 is used for the clock function.
10 OSC2/CLKO/RA6 output Oscillator crystal output connecting to the crystal or resonator in crystal mode, or CLKO (FOSC/4) in RC mode; RA6 is disabled when OSC2 is used for the clock function.
11 RC0 bidirectional PORTC<0> digital I/O, also Timer1 oscillator output T1OSO, Timer1 digital clock input T1CKI and remappable pin RP11.
12 RC1 bidirectional PORTC<1> digital I/O, also CCP8 capture/compare/PWM input/output, Timer1 oscillator input T1OSI and remappable pin RP12.
13 RC2 bidirectional PORTC<2> digital I/O, also analog input AN11, Comparator 2 Input D, CTMU pulse generator output CTPLS and remappable pin RP13.
14 RC3 bidirectional PORTC<3> digital I/O, also SPI clock SCK1, I2C clock SCL1 (MSSP1) and remappable pin RP14.
15 RC4 bidirectional PORTC<4> digital I/O, also SPI data input SDI1, I2C data SDA1 (MSSP1) and remappable pin RP15.
16 RC5 bidirectional PORTC<5> digital I/O, also SPI data output SDO1 and remappable pin RP16.
17 RC6 bidirectional PORTC<6> digital I/O, also CCP9, EUSART1 asynchronous transmit TX1, synchronous clock CK1 and remappable pin RP17; this pin is 5.5V tolerant.
18 RC7 bidirectional PORTC<7> digital I/O, also CCP10, EUSART1 asynchronous receive RX1, synchronous data DT1 and remappable pin RP18; this pin is 5.5V tolerant.
19 VSS2 power_in Ground reference for logic and I/O pins.
20 VDD power_in Positive supply for peripheral digital logic and I/O pins.
21 RB0 bidirectional PORTB<0> digital I/O with weak pull-up when RBPU is cleared, also analog input AN12, Comparator 3 Input D, external interrupt INT0 and remappable pin RP3.
22 RB1 bidirectional PORTB<1> digital I/O with weak pull-up when RBPU is cleared, also analog input AN10, Comparator 3 Input C, Real-Time Clock Calendar output RTCC and remappable pin RP4.
23 RB2 bidirectional PORTB<2> digital I/O with weak pull-up when RBPU is cleared, also analog input AN8, Comparator 2 Input C, CTMU Edge 1 input CTED1, reference output clock REFO and remappable pin RP5.
24 RB3 bidirectional PORTB<3> digital I/O with weak pull-up when RBPU is cleared, also analog input AN9, Comparator 3 Input A, CTMU Edge 2 input CTED2 and remappable pin RP6.
25 RB4 bidirectional PORTB<4> digital I/O with weak pull-up and interrupt-on-change input KBI0, also CCP4 capture/compare/PWM input/output, I2C clock SCL2 (MSSP2) and remappable pin RP7; this pin is 5.5V tolerant.
26 RB5 bidirectional PORTB<5> digital I/O with weak pull-up and interrupt-on-change input KBI1, also CCP5, I2C data SDA2 (MSSP2) and remappable pin RP8; this pin is 5.5V tolerant.
27 RB6 bidirectional PORTB<6> digital I/O with weak pull-up and interrupt-on-change input KBI2, also CCP6, ICSP clock input PGC and remappable pin RP9; this pin is 5.5V tolerant.
28 RB7 bidirectional PORTB<7> digital I/O with weak pull-up and interrupt-on-change input KBI3, also CCP7, ICSP/ICD data pin PGD and remappable pin RP10; this pin is 5.5V tolerant.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package SOIC-28-300mil
Category Single Chip Microcomputer/Microcontroller
Pins 28

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Operating voltage VDD (F device, regulator enabled) VDD 2.15 3.6 V PIC18F26J13 (F part, on-chip regulator enabled) 9
Internal oscillator frequency tolerance (tunable INTOSC, 31 kHz to 8 MHz) -1 1 % Tunable internal oscillator 31 kHz to 8 MHz 1
Operating frequency 48 MHz Device feature table, PIC18F26J13 (DC to 48 MHz) 10
Flash program memory erase/write endurance 10000 erase/write cycles Flash program memory, minimum 1
Flash data retention 20 years Flash program memory, minimum 1
VCAP/VDDCORE capacitor ESR 5 Ω Low-ESR capacitor on VCAP/VDDCORE, F devices 29
Digital-only input pin voltage tolerance 5.5 V Digital-only pins, 5.5V tolerant inputs 1
On-chip regulator output (VDDCORE) nominal VDDCORE 2.5 V F device regulator output, nominal 413
Regulator tracking-mode voltage drop 100 mV Regulator in Tracking mode (VDD below regulation point), typical drop of 100 mV or less 413
VCAP/VDDCORE filter capacitor CEFC 10 µF Capacitor from VCAP/VDDCORE to ground, F devices 29

CAD (KiCad official)

  • Symbol: PIC18F26J13-I
  • Footprint: Package_SO:SOIC-28W_7.5x17.9mm_P1.27mm
  • 3D model: SOIC-28-300mil (KiCad packages3D, STEP)
  • 3D model files: pic18f26j13-i-etched.step / pic18f26j13-i-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pic18f26j13-i.step / pic18f26j13-i.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (537 pp, sha256 961e405e1ed75010, retrieved 2026-10-30, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF