main
Ray
Publish 0.1.1
419db7c
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532533534535536537538539540541542
{
"schema_version": 1,
"type": "component",
"slug": "pic18f24j10-i",
"title": "PIC18F24J10-I",
"brief": "Microchip Tech Pre-ordered MCUs, SSOP-28-208mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"version": "0.1.1",
"license": "CC-BY-SA-4.0",
"tags": [
"component",
"embedded processors & controllers",
"pic18f24j10-i",
"factory-2.0.0",
"extractor-text"
],
"component": {
"mpn": "PIC18F24J10-I",
"manufacturer": "Microchip Tech",
"package": "SSOP-28-208mil",
"pin_count": 28,
"category": "Embedded Processors & Controllers",
"subcategory": "Pre-ordered MCUs",
"datasheet": "https://ww1.microchip.com/downloads/en/DeviceDoc/39682E.pdf",
"parts": {
"symbol": "pic18f24j10-i.kicad_sym",
"footprint": "pic18f24j10-i.kicad_mod",
"model_3d": "pic18f24j10-i-hero.glb",
"model_3d_plain": "pic18f24j10-i.glb",
"model_3d_step": "pic18f24j10-i-etched.step",
"model_3d_step_plain": "pic18f24j10-i.step",
"lbr": "pic18f24j10-i.lbr"
},
"distributor_links": {
"lcsc": "C641842"
},
"distributor_check": {
"checked_at": "2026-10-30T20:24:12Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": null,
"status": "no match"
},
"mouser": {
"pn": null,
"status": "no match"
}
},
"pins": [
{
"number": "1",
"name": "MCLR",
"type": "input",
"description": "Active-low Master Clear (Reset) input; it is also the programming voltage input, and it uses a Schmitt Trigger (ST) input buffer."
},
{
"number": "2",
"name": "RA0/AN0",
"type": "bidirectional",
"description": "Digital I/O port A pin with TTL input levels, multiplexed with Analog Input 0 and Comparator C1- input, which is the default configuration on Power-on Reset."
},
{
"number": "3",
"name": "RA1/AN1",
"type": "bidirectional",
"description": "Digital I/O port A pin with TTL input levels, multiplexed with Analog Input 1 and Comparator C2- input, which is the default configuration on Power-on Reset."
},
{
"number": "4",
"name": "RA2/AN2/VREF-/CVREF",
"type": "bidirectional",
"description": "Digital I/O port A pin multiplexed with Analog Input 2, the A/D and comparator voltage reference low input (VREF-), and the comparator voltage reference output (CVREF); enabling CVREF disables digital I/O."
},
{
"number": "5",
"name": "RA3/AN3/VREF+",
"type": "bidirectional",
"description": "Digital I/O port A pin multiplexed with Analog Input 3, Comparator C1+ input, and the A/D and comparator voltage reference high input (VREF+)."
},
{
"number": "6",
"name": "VDDCORE/VCAP",
"type": "power_in",
"description": "With the regulator enabled (F devices), VCAP needs a low-ESR (<5 Ω) capacitor of about 10 µF to ground and must not be connected to VDD; with the regulator disabled (LF devices), this pin must be tied to a 2.0-2.7 V core supply that never exceeds VDD."
},
{
"number": "7",
"name": "RA5/AN4/SS1/C2OUT",
"type": "bidirectional",
"description": "Digital I/O port A pin multiplexed with Analog Input 4, the MSSP1 SPI slave select input (SS1), and the Comparator 2 output (C2OUT), which takes priority over port data."
},
{
"number": "8",
"name": "VSS",
"type": "power_in",
"description": "Ground reference for logic and I/O pins."
},
{
"number": "9",
"name": "OSC1/CLKI",
"type": "input",
"description": "Oscillator crystal input or external clock source input (CLKI), CMOS input that is always associated with OSC2/CLKO."
},
{
"number": "10",
"name": "OSC2/CLKO",
"type": "output",
"description": "Oscillator crystal output that connects to the crystal or resonator in Crystal Oscillator mode; in EC mode it outputs CLKO at 1/4 the OSC1 frequency."
},
{
"number": "11",
"name": "RC0/T1OSO/T1CKI",
"type": "bidirectional",
"description": "Digital I/O port C pin with Schmitt Trigger input, multiplexed with the Timer1 oscillator output (T1OSO) and the Timer1 external clock input (T1CKI)."
},
{
"number": "12",
"name": "RC1/T1OSI/CCP2",
"type": "bidirectional",
"description": "Digital I/O port C pin multiplexed with the Timer1 oscillator input (T1OSI) and CCP2 capture input/compare output/PWM output, the default CCP2 location when CCP2MX is set."
},
{
"number": "13",
"name": "RC2/CCP1",
"type": "bidirectional",
"description": "Digital I/O port C pin multiplexed with CCP1 capture input, compare output, or PWM1 output."
},
{
"number": "14",
"name": "RC3/SCK1/SCL1",
"type": "bidirectional",
"description": "Digital I/O port C pin multiplexed with the MSSP1 SPI clock input/output (SCK1) and I2C clock input/output (SCL1)."
},
{
"number": "15",
"name": "RC4/SDI1/SDA1",
"type": "bidirectional",
"description": "Digital I/O port C pin multiplexed with the MSSP1 SPI data input (SDI1) and I2C data I/O (SDA1)."
},
{
"number": "16",
"name": "RC5/SDO1",
"type": "bidirectional",
"description": "Digital I/O port C pin multiplexed with the MSSP1 SPI data output (SDO1), which takes priority over port data."
},
{
"number": "17",
"name": "RC6/TX/CK",
"type": "bidirectional",
"description": "Digital I/O port C pin multiplexed with the EUSART asynchronous transmit (TX) output and the EUSART synchronous clock (CK) input/output."
},
{
"number": "18",
"name": "RC7/RX/DT",
"type": "bidirectional",
"description": "Digital I/O port C pin multiplexed with the EUSART asynchronous receive (RX) input and the EUSART synchronous data (DT) input/output."
},
{
"number": "19",
"name": "VSS",
"type": "power_in",
"description": "Ground reference for logic and I/O pins."
},
{
"number": "20",
"name": "VDD",
"type": "power_in",
"description": "Positive supply for logic and I/O pins; F devices run from 2.7-3.6 V on VDD, and VDDCORE should never exceed VDD."
},
{
"number": "21",
"name": "RB0/INT0/FLT0/AN12",
"type": "bidirectional",
"description": "Digital I/O port B pin with weak pull-up (when RBPU is cleared), External Interrupt 0 input, PWM Fault input for CCP1, and Analog Input 12; pins are analog inputs by default."
},
{
"number": "22",
"name": "RB1/INT1/AN10",
"type": "bidirectional",
"description": "Digital I/O port B pin with weak pull-up (when RBPU is cleared), External Interrupt 1 input, and Analog Input 10; pins are analog inputs by default."
},
{
"number": "23",
"name": "RB2/INT2/AN8",
"type": "bidirectional",
"description": "Digital I/O port B pin with weak pull-up (when RBPU is cleared), External Interrupt 2 input, and Analog Input 8; pins are analog inputs by default."
},
{
"number": "24",
"name": "RB3/AN9/CCP2",
"type": "bidirectional",
"description": "Digital I/O port B pin with weak pull-up (when RBPU is cleared), Analog Input 9, and CCP2 capture input/compare and PWM output (alternate CCP2 location when CCP2MX is cleared)."
},
{
"number": "25",
"name": "RB4/KBI0/AN11",
"type": "bidirectional",
"description": "Digital I/O port B pin with weak pull-up (when RBPU is cleared), interrupt-on-change input KBI0, and Analog Input 11; pins are analog inputs by default."
},
{
"number": "26",
"name": "RB5/KBI1/T0CKI/C1OUT",
"type": "bidirectional",
"description": "Digital I/O port B pin with weak pull-up (when RBPU is cleared), interrupt-on-change input KBI1, Timer0 clock input (T0CKI), and Comparator 1 output (C1OUT), which takes priority over port data."
},
{
"number": "27",
"name": "RB6/KBI2/PGC",
"type": "bidirectional",
"description": "Digital I/O port B pin with weak pull-up (when RBPU is cleared), interrupt-on-change input KBI2, and the In-Circuit Debugger and ICSP programming clock (PGC)."
},
{
"number": "28",
"name": "RB7/KBI3/PGD",
"type": "bidirectional",
"description": "Digital I/O port B pin with weak pull-up (when RBPU is cleared), interrupt-on-change input KBI3, and the In-Circuit Debugger and ICSP programming data (PGD) pin."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-haiku-5-5",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: The datasheet is the PIC18F45J10 family document. The 28-pin SSOP pin numbers come from Table 1-2 (P; The datasheet does not state the 208 mil body width. It only says '28-Lead SSOP', so the package nam; Table 1-2 pin-number cells for RA2 ('41') and VDDCORE/VCAP ('63') are merged in the text extraction.",
"1/28 pins cited to the wrong page (name found elsewhere): ['6:VDDCORE/VCAP@p17']"
],
"pages_sent": 71,
"cost_usd": 0.327,
"at": "2026-10-30T20:23:34"
},
"datasheet": {
"url": "https://ww1.microchip.com/downloads/en/DeviceDoc/39682E.pdf",
"pages": 368,
"sha256": "200de743a909cb1c",
"source_tier": "mfr"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 28,
"described": 28,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "pic18f24j10-i.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
7.8,
10.2,
2.1
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "7aa76979ae41da44bded1ed74115012868f2f3f5a757faf32bb9df4f92c1e313",
"checked": "2026-10-30",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "pic18f24j10-i-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
7.8,
10.2,
2.1
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "a1ff3986ce3942cd393b92a8d0fc46d900aa2d722cc6fa275afbd844a5d314b6",
"checked": "2026-10-30",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
},
"metadata": {
"specs": {
"Manufacturer": "Microchip Tech",
"Package": "SSOP-28-208mil",
"Category": "Embedded Processors & Controllers",
"Pins": "28"
},
"characteristics": {
"version": 1,
"source": "datasheet",
"datasheet_sha256": "200de743a909cb1c4a17f317cdaa07829159325e8c72f7bc177b1bd61a64ff76",
"rows": [
{
"name": "Supply voltage VDD (F device, regulator enabled)",
"symbol": "VDD",
"kind": "recommended_operating",
"unit": "V",
"min": 2.7,
"typ": null,
"max": 3.6,
"conditions": "PIC18F24J10 is an 'F' part: VDD 2.7-3.6 V",
"source_page": 10,
"source": "datasheet"
},
{
"name": "Operating frequency",
"symbol": "",
"kind": "recommended_operating",
"unit": "MHz",
"min": null,
"typ": null,
"max": 40,
"conditions": "Table 1-1 prints 'DC – 40 MHz' for the family; DC is not a numeric minimum",
"source_page": 11,
"source": "datasheet"
},
{
"name": "Input voltage tolerance, digital-only pins",
"symbol": "",
"kind": "electrical",
"unit": "V",
"min": null,
"typ": null,
"max": 5.5,
"conditions": "Digital-only input pins; pins with analog functions tolerate only up to VDD",
"source_page": 99,
"source": "datasheet"
},
{
"name": "High-current sink capability, PORTB and PORTC",
"symbol": "",
"kind": "electrical",
"unit": "mA",
"min": null,
"typ": null,
"max": 25,
"conditions": "High-current sink on PORTB and PORTC",
"source_page": 3,
"source": "datasheet"
},
{
"name": "High-current source capability, PORTB and PORTC",
"symbol": "",
"kind": "electrical",
"unit": "mA",
"min": null,
"typ": null,
"max": 25,
"conditions": "High-current source on PORTB and PORTC",
"source_page": 3,
"source": "datasheet"
},
{
"name": "Maximum recommended analog source impedance",
"symbol": "",
"kind": "recommended_operating",
"unit": "kΩ",
"min": null,
"typ": null,
"max": 2.5,
"conditions": "A/D analog input source impedance",
"source_page": 222,
"source": "datasheet"
},
{
"name": "VCAP/VDDCORE capacitor ESR",
"symbol": "ESR",
"kind": "recommended_operating",
"unit": "Ω",
"min": null,
"typ": null,
"max": 5,
"conditions": "Low-ESR capacitor on VCAP/VDDCORE when regulator enabled (F devices)",
"source_page": 27,
"source": "datasheet"
},
{
"name": "Decoupling capacitor voltage rating",
"symbol": "",
"kind": "recommended_operating",
"unit": "V",
"min": 10,
"typ": null,
"max": 20,
"conditions": "Recommended decoupling capacitor on each VDD/VSS pair, printed as 10-20V",
"source_page": 26,
"source": "datasheet"
},
{
"name": "MCLR series resistor R1",
"symbol": "R1",
"kind": "recommended_operating",
"unit": "kΩ",
"min": null,
"typ": null,
"max": 10,
"conditions": "Recommended R1 ≤ 10 kΩ; suggested starting value 10 kΩ",
"source_page": 26,
"source": "datasheet"
},
{
"name": "MCLR current-limit resistor R2",
"symbol": "R2",
"kind": "recommended_operating",
"unit": "Ω",
"min": null,
"typ": null,
"max": 470,
"conditions": "R2 ≤ 470 Ω, limits current from external capacitor into MCLR",
"source_page": 26,
"source": "datasheet"
},
{
"name": "ICSP series resistor (PGC/PGD)",
"symbol": "",
"kind": "recommended_operating",
"unit": "Ω",
"min": null,
"typ": null,
"max": 100,
"conditions": "If ICSP connector expected to see ESD; a few tens of ohms, not to exceed 100 Ω",
"source_page": 27,
"source": "datasheet"
},
{
"name": "Unused I/O pull-down resistor to VSS",
"symbol": "",
"kind": "recommended_operating",
"unit": "kΩ",
"min": 1,
"typ": null,
"max": 10,
"conditions": "Unused pins: 1 kΩ to 10 kΩ to VSS, driven low (alternative: configure as output low)",
"source_page": 28,
"source": "datasheet"
},
{
"name": "Power-up Timer (PWRT) interval",
"symbol": "",
"kind": "timing",
"unit": "ms",
"min": null,
"typ": 65.6,
"max": null,
"conditions": "Approximate: 2048 x 32 µs on INTRC; see DC parameter 33 for details",
"source_page": 46,
"source": "datasheet"
},
{
"name": "Internal oscillator (INTRC) frequency",
"symbol": "",
"kind": "electrical",
"unit": "kHz",
"min": null,
"typ": 31,
"max": null,
"conditions": "Approximately 31 kHz internal oscillator",
"source_page": 9,
"source": "datasheet"
},
{
"name": "VCAP/VDDCORE capacitor",
"symbol": "",
"kind": "recommended_operating",
"unit": "µF",
"min": null,
"typ": 10,
"max": null,
"conditions": "Capacitor to ground on VCAP/VDDCORE, ceramic or tantalum; regulator enabled",
"source_page": 27,
"source": "datasheet"
},
{
"name": "Decoupling capacitor",
"symbol": "",
"kind": "recommended_operating",
"unit": "µF",
"min": null,
"typ": 0.1,
"max": null,
"conditions": "Recommended on every VDD/VSS pair, low-ESR ceramic",
"source_page": 26,
"source": "datasheet"
}
]
}
},
"variants": [],
"sections": [
"hero",
"viewers",
"readme",
"breadcrumbs",
"info"
],
"discovery_triggers": [
"pic18f24j10-i"
],
"discovery_pitch": "PIC18F24J10-I (Microchip Tech) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
"author": {
"name": "Ray"
},
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"pic18f24j10-i.kicad_sym",
"pic18f24j10-i.kicad_mod",
"pic18f24j10-i.glb",
"pic18f24j10-i.step",
"pic18f24j10-i.lbr",
"docs/hero.png",
"docs/pic18f24j10-i-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"pic18f24j10-i-hero.glb",
"pic18f24j10-i-hero.overlay.json",
"pic18f24j10-i-etched.glb",
"pic18f24j10-i-etched.step"
],
"visibility": "public",
"description": "Microchip Tech Pre-ordered MCUs, SSOP-28-208mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"org": "adom"
}