Generated by kicad-footprint-generator · KiCad file format 20260206
PIC18F24J10-I
Microchip Tech · Pre-ordered MCUs · SSOP-28-208mil
PIC18F24J10-I from Microchip Tech, in a SSOP-28-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | MCLR | input | Active-low Master Clear (Reset) input; it is also the programming voltage input, and it uses a Schmitt Trigger (ST) input buffer. |
| 2 | RA0/AN0 | bidirectional | Digital I/O port A pin with TTL input levels, multiplexed with Analog Input 0 and Comparator C1- input, which is the default configuration on Power-on Reset. |
| 3 | RA1/AN1 | bidirectional | Digital I/O port A pin with TTL input levels, multiplexed with Analog Input 1 and Comparator C2- input, which is the default configuration on Power-on Reset. |
| 4 | RA2/AN2/VREF-/CVREF | bidirectional | Digital I/O port A pin multiplexed with Analog Input 2, the A/D and comparator voltage reference low input (VREF-), and the comparator voltage reference output (CVREF); enabling CVREF disables digital I/O. |
| 5 | RA3/AN3/VREF+ | bidirectional | Digital I/O port A pin multiplexed with Analog Input 3, Comparator C1+ input, and the A/D and comparator voltage reference high input (VREF+). |
| 6 | VDDCORE/VCAP | power_in | With the regulator enabled (F devices), VCAP needs a low-ESR (<5 Ω) capacitor of about 10 µF to ground and must not be connected to VDD; with the regulator disabled (LF devices), this pin must be tied to a 2.0-2.7 V core supply that never exceeds VDD. |
| 7 | RA5/AN4/SS1/C2OUT | bidirectional | Digital I/O port A pin multiplexed with Analog Input 4, the MSSP1 SPI slave select input (SS1), and the Comparator 2 output (C2OUT), which takes priority over port data. |
| 8 | VSS | power_in | Ground reference for logic and I/O pins. |
| 9 | OSC1/CLKI | input | Oscillator crystal input or external clock source input (CLKI), CMOS input that is always associated with OSC2/CLKO. |
| 10 | OSC2/CLKO | output | Oscillator crystal output that connects to the crystal or resonator in Crystal Oscillator mode; in EC mode it outputs CLKO at 1/4 the OSC1 frequency. |
| 11 | RC0/T1OSO/T1CKI | bidirectional | Digital I/O port C pin with Schmitt Trigger input, multiplexed with the Timer1 oscillator output (T1OSO) and the Timer1 external clock input (T1CKI). |
| 12 | RC1/T1OSI/CCP2 | bidirectional | Digital I/O port C pin multiplexed with the Timer1 oscillator input (T1OSI) and CCP2 capture input/compare output/PWM output, the default CCP2 location when CCP2MX is set. |
| 13 | RC2/CCP1 | bidirectional | Digital I/O port C pin multiplexed with CCP1 capture input, compare output, or PWM1 output. |
| 14 | RC3/SCK1/SCL1 | bidirectional | Digital I/O port C pin multiplexed with the MSSP1 SPI clock input/output (SCK1) and I2C clock input/output (SCL1). |
| 15 | RC4/SDI1/SDA1 | bidirectional | Digital I/O port C pin multiplexed with the MSSP1 SPI data input (SDI1) and I2C data I/O (SDA1). |
| 16 | RC5/SDO1 | bidirectional | Digital I/O port C pin multiplexed with the MSSP1 SPI data output (SDO1), which takes priority over port data. |
| 17 | RC6/TX/CK | bidirectional | Digital I/O port C pin multiplexed with the EUSART asynchronous transmit (TX) output and the EUSART synchronous clock (CK) input/output. |
| 18 | RC7/RX/DT | bidirectional | Digital I/O port C pin multiplexed with the EUSART asynchronous receive (RX) input and the EUSART synchronous data (DT) input/output. |
| 19 | VSS | power_in | Ground reference for logic and I/O pins. |
| 20 | VDD | power_in | Positive supply for logic and I/O pins; F devices run from 2.7-3.6 V on VDD, and VDDCORE should never exceed VDD. |
| 21 | RB0/INT0/FLT0/AN12 | bidirectional | Digital I/O port B pin with weak pull-up (when RBPU is cleared), External Interrupt 0 input, PWM Fault input for CCP1, and Analog Input 12; pins are analog inputs by default. |
| 22 | RB1/INT1/AN10 | bidirectional | Digital I/O port B pin with weak pull-up (when RBPU is cleared), External Interrupt 1 input, and Analog Input 10; pins are analog inputs by default. |
| 23 | RB2/INT2/AN8 | bidirectional | Digital I/O port B pin with weak pull-up (when RBPU is cleared), External Interrupt 2 input, and Analog Input 8; pins are analog inputs by default. |
| 24 | RB3/AN9/CCP2 | bidirectional | Digital I/O port B pin with weak pull-up (when RBPU is cleared), Analog Input 9, and CCP2 capture input/compare and PWM output (alternate CCP2 location when CCP2MX is cleared). |
| 25 | RB4/KBI0/AN11 | bidirectional | Digital I/O port B pin with weak pull-up (when RBPU is cleared), interrupt-on-change input KBI0, and Analog Input 11; pins are analog inputs by default. |
| 26 | RB5/KBI1/T0CKI/C1OUT | bidirectional | Digital I/O port B pin with weak pull-up (when RBPU is cleared), interrupt-on-change input KBI1, Timer0 clock input (T0CKI), and Comparator 1 output (C1OUT), which takes priority over port data. |
| 27 | RB6/KBI2/PGC | bidirectional | Digital I/O port B pin with weak pull-up (when RBPU is cleared), interrupt-on-change input KBI2, and the In-Circuit Debugger and ICSP programming clock (PGC). |
| 28 | RB7/KBI3/PGD | bidirectional | Digital I/O port B pin with weak pull-up (when RBPU is cleared), interrupt-on-change input KBI3, and the In-Circuit Debugger and ICSP programming data (PGD) pin. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SSOP-28-208mil |
| Category | Embedded Processors & Controllers |
| Pins | 28 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage VDD (F device, regulator enabled) | VDD | 2.7 | 3.6 | V | PIC18F24J10 is an 'F' part: VDD 2.7-3.6 V | 10 | |
| Operating frequency | 40 | MHz | Table 1-1 prints 'DC, 40 MHz' for the family; DC is not a numeric minimum | 11 | |||
| Input voltage tolerance, digital-only pins | 5.5 | V | Digital-only input pins; pins with analog functions tolerate only up to VDD | 99 | |||
| High-current sink capability, PORTB and PORTC | 25 | mA | High-current sink on PORTB and PORTC | 3 | |||
| High-current source capability, PORTB and PORTC | 25 | mA | High-current source on PORTB and PORTC | 3 | |||
| Maximum recommended analog source impedance | 2.5 | kΩ | A/D analog input source impedance | 222 | |||
| VCAP/VDDCORE capacitor ESR | ESR | 5 | Ω | Low-ESR capacitor on VCAP/VDDCORE when regulator enabled (F devices) | 27 | ||
| Decoupling capacitor voltage rating | 10 | 20 | V | Recommended decoupling capacitor on each VDD/VSS pair, printed as 10-20V | 26 | ||
| MCLR series resistor R1 | R1 | 10 | kΩ | Recommended R1 ≤ 10 kΩ; suggested starting value 10 kΩ | 26 | ||
| MCLR current-limit resistor R2 | R2 | 470 | Ω | R2 ≤ 470 Ω, limits current from external capacitor into MCLR | 26 | ||
| ICSP series resistor (PGC/PGD) | 100 | Ω | If ICSP connector expected to see ESD; a few tens of ohms, not to exceed 100 Ω | 27 | |||
| Unused I/O pull-down resistor to VSS | 1 | 10 | kΩ | Unused pins: 1 kΩ to 10 kΩ to VSS, driven low (alternative: configure as output low) | 28 | ||
| Power-up Timer (PWRT) interval | 65.6 | ms | Approximate: 2048 x 32 µs on INTRC; see DC parameter 33 for details | 46 | |||
| Internal oscillator (INTRC) frequency | 31 | kHz | Approximately 31 kHz internal oscillator | 9 | |||
| VCAP/VDDCORE capacitor | 10 | µF | Capacitor to ground on VCAP/VDDCORE, ceramic or tantalum; regulator enabled | 27 | |||
| Decoupling capacitor | 0.1 | µF | Recommended on every VDD/VSS pair, low-ESR ceramic | 26 |
CAD (KiCad official)
- Symbol:
PIC18F24J10-I - Footprint:
Package_SO:SSOP-28_5.3x10.2mm_P0.65mm - 3D model: SSOP-28-208mil (KiCad packages3D, STEP)
- 3D model files:
pic18f24j10-i-etched.step/pic18f24j10-i-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic18f24j10-i.step/pic18f24j10-i.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (368 pp, sha256
200de743a909cb1c, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).