main
Ray Publish 0.1.0 9aaac4a

PIC16LF1933T-I

Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · QFN-28-EP(6x6)

PIC16LF1933T-I from Microchip Tech, in a QFN-28-EP(6x6). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 RA2 bidirectional General purpose I/O PORTA bit 2 multiplexed with AN2, VREF-, C2IN+, DACOUT and COM2 (LCD).
2 RA3 bidirectional General purpose I/O PORTA bit 3 multiplexed with AN3, VREF+, C1IN+, SEG15 and COM3 (LCD).
3 RA4 bidirectional General purpose I/O PORTA bit 4 multiplexed with C1OUT, CPS6, T0CKI, SRQ, CCP5 and SEG4.
4 RA5 bidirectional General purpose I/O PORTA bit 5 multiplexed with AN4, CPS7, SEG5 and APFCON-selectable C2OUT, SRNQ and SS.
5 VSS power_in Ground reference.
6 RA7 bidirectional General purpose I/O PORTA bit 7 multiplexed with OSC1/CLKIN (crystal or external clock input) and SEG2.
7 RA6 bidirectional General purpose I/O PORTA bit 6 multiplexed with OSC2/CLKOUT (FOSC/4 output) and SEG1.
8 RC0 bidirectional General purpose I/O PORTC bit 0 multiplexed with T1OSO (Timer1 oscillator), T1CKI and APFCON-selectable P2B.
9 RC1 bidirectional General purpose I/O PORTC bit 1 multiplexed with T1OSI (Timer1 oscillator) and APFCON-selectable CCP2/P2A.
10 RC2 bidirectional General purpose I/O PORTC bit 2 multiplexed with CCP1/P1A and SEG3.
11 RC3 bidirectional General purpose I/O PORTC bit 3 multiplexed with SPI clock SCK / I2C clock SCL and SEG6.
12 RC4 bidirectional General purpose I/O PORTC bit 4 multiplexed with SPI data input SDI / I2C data SDA, APFCON-selectable T1G and SEG11.
13 RC5 bidirectional General purpose I/O PORTC bit 5 multiplexed with SPI data output SDO and SEG10.
14 RC6 bidirectional General purpose I/O PORTC bit 6 multiplexed with EUSART TX/CK, CCP3/P3A and SEG9.
15 RC7 bidirectional General purpose I/O PORTC bit 7 multiplexed with EUSART RX/DT, P3B and SEG8.
16 VSS power_in Ground reference.
17 VDD power_in Positive supply; PIC16LF1933 operates from 1.8V to 3.6V.
18 RB0 bidirectional General purpose I/O PORTB bit 0 with interrupt-on-change and weak pull-up, multiplexed with AN12, CPS0, CCP4, SRI, INT and SEG0.
19 RB1 bidirectional General purpose I/O PORTB bit 1 with interrupt-on-change and weak pull-up, multiplexed with AN10, C12IN3-, CPS1, P1C and VLCD1.
20 RB2 bidirectional General purpose I/O PORTB bit 2 with interrupt-on-change and weak pull-up, multiplexed with AN8, CPS2, P1B and VLCD2.
21 RB3 bidirectional General purpose I/O PORTB bit 3 with interrupt-on-change and weak pull-up, multiplexed with AN9, C12IN2-, CPS3, APFCON-selectable CCP2/P2A and VLCD3.
22 RB4 bidirectional General purpose I/O PORTB bit 4 with interrupt-on-change and weak pull-up, multiplexed with AN11, CPS4, P1D and COM0.
23 RB5 bidirectional General purpose I/O PORTB bit 5 with interrupt-on-change and weak pull-up, multiplexed with AN13, CPS5, COM1 and APFCON-selectable P2B, CCP3/P3A and T1G.
24 RB6 bidirectional General purpose I/O PORTB bit 6 with interrupt-on-change and weak pull-up, also ICSPCLK/ICDCLK programming/debug clock and SEG14.
25 RB7 bidirectional General purpose I/O PORTB bit 7 with interrupt-on-change and weak pull-up, also ICSPDAT/ICDDAT programming/debug data and SEG13.
26 RE3 input General purpose input RE3 or Master Clear (MCLR, internal weak pull-up) or VPP programming voltage input.
27 RA0 bidirectional General purpose I/O PORTA bit 0 multiplexed with AN0, C12IN0-, SEG12 and APFCON-selectable C2OUT, SRNQ and SS.
28 RA1 bidirectional General purpose I/O PORTA bit 1 multiplexed with AN1, C12IN1- and SEG7.
29 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package QFN-28-EP(6x6)
Category Single Chip Microcomputer/Microcontroller
Pins 29

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage (FOSC ≤ 16 MHz) VDD 1.8 3.6 V PIC16LF1933, FOSC ≤ 16 MHz 368
Supply Voltage (FOSC ≤ 32 MHz) VDD 2.5 3.6 V PIC16LF1933, FOSC ≤ 32 MHz (Note 2) 368
RAM Data Retention Voltage VDR 1.5 V PIC16LF1933, Device in Sleep mode 368
FVR Voltage for ADC VADFVR -8 6 % 1.024V, VDD ≥ 2.5V; 2.048V, VDD ≥ 2.5V; 4.096V, VDD ≥ 4.75V 368
FVR Voltage for Comparator and DAC VCDAFVR -11 7 % 1.024V, VDD ≥ 2.5V; 2.048V, VDD ≥ 2.5V; 4.096V, VDD ≥ 4.75V 368
FVR Voltage for LCD Bias VLCDFVR -11 10 % 3.072V, VDD ≥ 3.6V 368
VDD Rise Rate SVDD 0.05 V/ms See Section 6.1 368
Power-on Reset Release Voltage VPOR 1.6 V 368
Power-on Reset Rearm Voltage VPORR 0.8 V PIC16LF1933 368
Supply Current LP 32 kHz IDD 8 14 µA VDD=1.8V, FOSC=32 kHz LP mode, -40°C to +85°C 370
Supply Current LP 32 kHz IDD 12 18 µA VDD=3.0V, FOSC=32 kHz LP mode, -40°C to +85°C 370
Supply Current XT 1 MHz IDD 120 160 µA VDD=1.8V, FOSC=1 MHz 370
Supply Current XT 1 MHz IDD 200 255 µA VDD=3.0V, FOSC=1 MHz 370
Supply Current XT 4 MHz IDD 325 370 µA VDD=1.8V, FOSC=4 MHz 370
Supply Current XT 4 MHz IDD 600 710 µA VDD=3.0V, FOSC=4 MHz 370
Supply Current EC 32 MHz IDD 3.7 4.2 mA VDD=3.0V, FOSC=32 MHz 371
Supply Current EC 32 MHz IDD 4.2 5.2 mA VDD=3.6V, FOSC=32 MHz 371
Supply Current HFINTOSC 8 MHz IDD 0.8 1.1 mA VDD=1.8V, FOSC=8 MHz 372
Supply Current HFINTOSC 16 MHz IDD 2.2 2.6 mA VDD=3.0V, FOSC=16 MHz 372
Supply Current HFINTOSC 32 MHz IDD 4.7 5.6 mA VDD=3.6V, FOSC=32 MHz 372
Power-down Base Current IPD 0.06 1 µA VDD=1.8V, WDT, BOR, FVR, T1OSC disabled, Max at +85°C 373
Power-down Base Current IPD 0.08 2 µA VDD=3.0V, WDT, BOR, FVR, T1OSC disabled, Max at +85°C 373
LPWDT Current IPD 0.8 7 µA VDD=3.0V, Max at +85°C 373
BOR Current IPD 8 17 µA VDD=3.0V, Max at +85°C 373
Input Low Voltage TTL VIL 0.8 V 4.5V ≤ VDD ≤ 5.5V 375
Input Low Voltage VIL 0.15 V 1.8V ≤ VDD ≤ 4.5V; value is 0.15 VDD 375
Input Low Voltage Schmitt Trigger VIL 0.2 V 2.0V ≤ VDD ≤ 5.5V; value is 0.2 VDD 375
Input High Voltage Schmitt Trigger VIH 0.8 V 2.0V ≤ VDD ≤ 5.5V; value is 0.8 VDD 375
Input Leakage Current I/O IIL -1000 5 1000 nA VSS ≤ VPIN ≤ VDD, high-impedance; typ ±5, max ±125 @85°C, ±1000 @125°C 375
Weak Pull-up Current IPUR 25 100 200 µA VDD=3.3V, VPIN=VSS 375
Output Low Voltage VOL 0.6 V IOL=6mA, VDD=3.3V; IOL=1.8mA, VDD=1.8V 375
Output High Voltage VOH 0.7 V VDD - 0.7 min; IOH=3mA, VDD=3.3V; IOH=1mA, VDD=1.8V 375
Voltage on MCLR/VPP VIHH 8 9 V Note 3, Note 4 377
Thermal Resistance Junction to Ambient θJA 31.1 °C/W 28-pin QFN 6x6mm package 378
Thermal Resistance Junction to Case θJC 5 °C/W 28-pin QFN 6x6mm package 378
Maximum Junction Temperature TJMAX 150 °C 378
HFINTOSC Frequency HFOSC 16 MHz ±2%, 0°C ≤ TA ≤ +60°C, VDD ≥ 2.5V; ±3% 60°C-85°C; ±5% -40°C to +125°C 381
MFINTOSC Frequency MFOSC 500 kHz ±2%, 0°C ≤ TA ≤ +60°C, VDD ≥ 2.5V; ±3% 60°C-85°C; ±5% -40°C to +125°C 381
LFINTOSC Frequency LFOSC 31 kHz ±25%, -40°C ≤ TA ≤ +125°C 381
Brown-out Reset Voltage VBOR 2.38 2.5 2.73 V BORV = 0 384
Brown-out Reset Voltage VBOR 1.8 1.9 2.11 V BORV = 1 384
Brown-out Reset Hysteresis VHYST 0 25 60 mV -40°C to +85°C 384
Power-up Timer Period TPWRT 40 65 140 ms PWRTE = 0 384
Low-Power Watchdog Timer Time-out Period TWDTLP 10 16 27 ms VDD = 3.3V-5V, 1:16 Prescaler used 384
ADC Resolution NR 10 bit 386
ADC Integral Error EIL -1.7 1.7 LSb VREF = 3.0V 386
ADC Offset Error EOFF -2.5 2.5 LSb VREF = 3.0V 386
ADC Gain Error EGN -2 2 LSb VREF = 3.0V 386
ADC Reference Voltage VREF 1.8 V VREF = (VREF+ minus VREF-); max is VDD 386
Comparator Input Offset Voltage VIOFF -60 7.5 60 mV High-Power mode, VICM = VDD/2 388
Voltage on VDD with respect to VSS VDD -0.3 4 V PIC16LF1933 365
Voltage on MCLR with respect to VSS -0.3 9 V 365
Storage Temperature -65 150 °C 365
Ambient Temperature under Bias -40 125 °C 365
Max Output Current Sunk by Any I/O Pin 25 mA 365

CAD (KiCad official)

  • Symbol: PIC16LF1933T-I
  • Footprint: Package_DFN_QFN:QFN-28-1EP_6x6mm_P0.65mm_EP4.8x4.8mm
  • 3D model: QFN-28-EP(6x6) (KiCad packages3D, STEP)
  • 3D model files: pic16lf1933t-i-etched.step / pic16lf1933t-i-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pic16lf1933t-i.step / pic16lf1933t-i.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (464 pp, sha256 81839274508365b1, retrieved 2026-10-30, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF