3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownPIC16LF1933T-I
Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · QFN-28-EP(6x6)
PIC16LF1933T-I from Microchip Tech, in a QFN-28-EP(6x6). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RA2 | bidirectional | General purpose I/O PORTA bit 2 multiplexed with AN2, VREF-, C2IN+, DACOUT and COM2 (LCD). |
| 2 | RA3 | bidirectional | General purpose I/O PORTA bit 3 multiplexed with AN3, VREF+, C1IN+, SEG15 and COM3 (LCD). |
| 3 | RA4 | bidirectional | General purpose I/O PORTA bit 4 multiplexed with C1OUT, CPS6, T0CKI, SRQ, CCP5 and SEG4. |
| 4 | RA5 | bidirectional | General purpose I/O PORTA bit 5 multiplexed with AN4, CPS7, SEG5 and APFCON-selectable C2OUT, SRNQ and SS. |
| 5 | VSS | power_in | Ground reference. |
| 6 | RA7 | bidirectional | General purpose I/O PORTA bit 7 multiplexed with OSC1/CLKIN (crystal or external clock input) and SEG2. |
| 7 | RA6 | bidirectional | General purpose I/O PORTA bit 6 multiplexed with OSC2/CLKOUT (FOSC/4 output) and SEG1. |
| 8 | RC0 | bidirectional | General purpose I/O PORTC bit 0 multiplexed with T1OSO (Timer1 oscillator), T1CKI and APFCON-selectable P2B. |
| 9 | RC1 | bidirectional | General purpose I/O PORTC bit 1 multiplexed with T1OSI (Timer1 oscillator) and APFCON-selectable CCP2/P2A. |
| 10 | RC2 | bidirectional | General purpose I/O PORTC bit 2 multiplexed with CCP1/P1A and SEG3. |
| 11 | RC3 | bidirectional | General purpose I/O PORTC bit 3 multiplexed with SPI clock SCK / I2C clock SCL and SEG6. |
| 12 | RC4 | bidirectional | General purpose I/O PORTC bit 4 multiplexed with SPI data input SDI / I2C data SDA, APFCON-selectable T1G and SEG11. |
| 13 | RC5 | bidirectional | General purpose I/O PORTC bit 5 multiplexed with SPI data output SDO and SEG10. |
| 14 | RC6 | bidirectional | General purpose I/O PORTC bit 6 multiplexed with EUSART TX/CK, CCP3/P3A and SEG9. |
| 15 | RC7 | bidirectional | General purpose I/O PORTC bit 7 multiplexed with EUSART RX/DT, P3B and SEG8. |
| 16 | VSS | power_in | Ground reference. |
| 17 | VDD | power_in | Positive supply; PIC16LF1933 operates from 1.8V to 3.6V. |
| 18 | RB0 | bidirectional | General purpose I/O PORTB bit 0 with interrupt-on-change and weak pull-up, multiplexed with AN12, CPS0, CCP4, SRI, INT and SEG0. |
| 19 | RB1 | bidirectional | General purpose I/O PORTB bit 1 with interrupt-on-change and weak pull-up, multiplexed with AN10, C12IN3-, CPS1, P1C and VLCD1. |
| 20 | RB2 | bidirectional | General purpose I/O PORTB bit 2 with interrupt-on-change and weak pull-up, multiplexed with AN8, CPS2, P1B and VLCD2. |
| 21 | RB3 | bidirectional | General purpose I/O PORTB bit 3 with interrupt-on-change and weak pull-up, multiplexed with AN9, C12IN2-, CPS3, APFCON-selectable CCP2/P2A and VLCD3. |
| 22 | RB4 | bidirectional | General purpose I/O PORTB bit 4 with interrupt-on-change and weak pull-up, multiplexed with AN11, CPS4, P1D and COM0. |
| 23 | RB5 | bidirectional | General purpose I/O PORTB bit 5 with interrupt-on-change and weak pull-up, multiplexed with AN13, CPS5, COM1 and APFCON-selectable P2B, CCP3/P3A and T1G. |
| 24 | RB6 | bidirectional | General purpose I/O PORTB bit 6 with interrupt-on-change and weak pull-up, also ICSPCLK/ICDCLK programming/debug clock and SEG14. |
| 25 | RB7 | bidirectional | General purpose I/O PORTB bit 7 with interrupt-on-change and weak pull-up, also ICSPDAT/ICDDAT programming/debug data and SEG13. |
| 26 | RE3 | input | General purpose input RE3 or Master Clear (MCLR, internal weak pull-up) or VPP programming voltage input. |
| 27 | RA0 | bidirectional | General purpose I/O PORTA bit 0 multiplexed with AN0, C12IN0-, SEG12 and APFCON-selectable C2OUT, SRNQ and SS. |
| 28 | RA1 | bidirectional | General purpose I/O PORTA bit 1 multiplexed with AN1, C12IN1- and SEG7. |
| 29 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | QFN-28-EP(6x6) |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 29 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage (FOSC ≤ 16 MHz) | VDD | 1.8 | 3.6 | V | PIC16LF1933, FOSC ≤ 16 MHz | 368 | |
| Supply Voltage (FOSC ≤ 32 MHz) | VDD | 2.5 | 3.6 | V | PIC16LF1933, FOSC ≤ 32 MHz (Note 2) | 368 | |
| RAM Data Retention Voltage | VDR | 1.5 | V | PIC16LF1933, Device in Sleep mode | 368 | ||
| FVR Voltage for ADC | VADFVR | -8 | 6 | % | 1.024V, VDD ≥ 2.5V; 2.048V, VDD ≥ 2.5V; 4.096V, VDD ≥ 4.75V | 368 | |
| FVR Voltage for Comparator and DAC | VCDAFVR | -11 | 7 | % | 1.024V, VDD ≥ 2.5V; 2.048V, VDD ≥ 2.5V; 4.096V, VDD ≥ 4.75V | 368 | |
| FVR Voltage for LCD Bias | VLCDFVR | -11 | 10 | % | 3.072V, VDD ≥ 3.6V | 368 | |
| VDD Rise Rate | SVDD | 0.05 | V/ms | See Section 6.1 | 368 | ||
| Power-on Reset Release Voltage | VPOR | 1.6 | V | 368 | |||
| Power-on Reset Rearm Voltage | VPORR | 0.8 | V | PIC16LF1933 | 368 | ||
| Supply Current LP 32 kHz | IDD | 8 | 14 | µA | VDD=1.8V, FOSC=32 kHz LP mode, -40°C to +85°C | 370 | |
| Supply Current LP 32 kHz | IDD | 12 | 18 | µA | VDD=3.0V, FOSC=32 kHz LP mode, -40°C to +85°C | 370 | |
| Supply Current XT 1 MHz | IDD | 120 | 160 | µA | VDD=1.8V, FOSC=1 MHz | 370 | |
| Supply Current XT 1 MHz | IDD | 200 | 255 | µA | VDD=3.0V, FOSC=1 MHz | 370 | |
| Supply Current XT 4 MHz | IDD | 325 | 370 | µA | VDD=1.8V, FOSC=4 MHz | 370 | |
| Supply Current XT 4 MHz | IDD | 600 | 710 | µA | VDD=3.0V, FOSC=4 MHz | 370 | |
| Supply Current EC 32 MHz | IDD | 3.7 | 4.2 | mA | VDD=3.0V, FOSC=32 MHz | 371 | |
| Supply Current EC 32 MHz | IDD | 4.2 | 5.2 | mA | VDD=3.6V, FOSC=32 MHz | 371 | |
| Supply Current HFINTOSC 8 MHz | IDD | 0.8 | 1.1 | mA | VDD=1.8V, FOSC=8 MHz | 372 | |
| Supply Current HFINTOSC 16 MHz | IDD | 2.2 | 2.6 | mA | VDD=3.0V, FOSC=16 MHz | 372 | |
| Supply Current HFINTOSC 32 MHz | IDD | 4.7 | 5.6 | mA | VDD=3.6V, FOSC=32 MHz | 372 | |
| Power-down Base Current | IPD | 0.06 | 1 | µA | VDD=1.8V, WDT, BOR, FVR, T1OSC disabled, Max at +85°C | 373 | |
| Power-down Base Current | IPD | 0.08 | 2 | µA | VDD=3.0V, WDT, BOR, FVR, T1OSC disabled, Max at +85°C | 373 | |
| LPWDT Current | IPD | 0.8 | 7 | µA | VDD=3.0V, Max at +85°C | 373 | |
| BOR Current | IPD | 8 | 17 | µA | VDD=3.0V, Max at +85°C | 373 | |
| Input Low Voltage TTL | VIL | 0.8 | V | 4.5V ≤ VDD ≤ 5.5V | 375 | ||
| Input Low Voltage | VIL | 0.15 | V | 1.8V ≤ VDD ≤ 4.5V; value is 0.15 VDD | 375 | ||
| Input Low Voltage Schmitt Trigger | VIL | 0.2 | V | 2.0V ≤ VDD ≤ 5.5V; value is 0.2 VDD | 375 | ||
| Input High Voltage Schmitt Trigger | VIH | 0.8 | V | 2.0V ≤ VDD ≤ 5.5V; value is 0.8 VDD | 375 | ||
| Input Leakage Current I/O | IIL | -1000 | 5 | 1000 | nA | VSS ≤ VPIN ≤ VDD, high-impedance; typ ±5, max ±125 @85°C, ±1000 @125°C | 375 |
| Weak Pull-up Current | IPUR | 25 | 100 | 200 | µA | VDD=3.3V, VPIN=VSS | 375 |
| Output Low Voltage | VOL | 0.6 | V | IOL=6mA, VDD=3.3V; IOL=1.8mA, VDD=1.8V | 375 | ||
| Output High Voltage | VOH | 0.7 | V | VDD - 0.7 min; IOH=3mA, VDD=3.3V; IOH=1mA, VDD=1.8V | 375 | ||
| Voltage on MCLR/VPP | VIHH | 8 | 9 | V | Note 3, Note 4 | 377 | |
| Thermal Resistance Junction to Ambient | θJA | 31.1 | °C/W | 28-pin QFN 6x6mm package | 378 | ||
| Thermal Resistance Junction to Case | θJC | 5 | °C/W | 28-pin QFN 6x6mm package | 378 | ||
| Maximum Junction Temperature | TJMAX | 150 | °C | 378 | |||
| HFINTOSC Frequency | HFOSC | 16 | MHz | ±2%, 0°C ≤ TA ≤ +60°C, VDD ≥ 2.5V; ±3% 60°C-85°C; ±5% -40°C to +125°C | 381 | ||
| MFINTOSC Frequency | MFOSC | 500 | kHz | ±2%, 0°C ≤ TA ≤ +60°C, VDD ≥ 2.5V; ±3% 60°C-85°C; ±5% -40°C to +125°C | 381 | ||
| LFINTOSC Frequency | LFOSC | 31 | kHz | ±25%, -40°C ≤ TA ≤ +125°C | 381 | ||
| Brown-out Reset Voltage | VBOR | 2.38 | 2.5 | 2.73 | V | BORV = 0 | 384 |
| Brown-out Reset Voltage | VBOR | 1.8 | 1.9 | 2.11 | V | BORV = 1 | 384 |
| Brown-out Reset Hysteresis | VHYST | 0 | 25 | 60 | mV | -40°C to +85°C | 384 |
| Power-up Timer Period | TPWRT | 40 | 65 | 140 | ms | PWRTE = 0 | 384 |
| Low-Power Watchdog Timer Time-out Period | TWDTLP | 10 | 16 | 27 | ms | VDD = 3.3V-5V, 1:16 Prescaler used | 384 |
| ADC Resolution | NR | 10 | bit | 386 | |||
| ADC Integral Error | EIL | -1.7 | 1.7 | LSb | VREF = 3.0V | 386 | |
| ADC Offset Error | EOFF | -2.5 | 2.5 | LSb | VREF = 3.0V | 386 | |
| ADC Gain Error | EGN | -2 | 2 | LSb | VREF = 3.0V | 386 | |
| ADC Reference Voltage | VREF | 1.8 | V | VREF = (VREF+ minus VREF-); max is VDD | 386 | ||
| Comparator Input Offset Voltage | VIOFF | -60 | 7.5 | 60 | mV | High-Power mode, VICM = VDD/2 | 388 |
| Voltage on VDD with respect to VSS | VDD | -0.3 | 4 | V | PIC16LF1933 | 365 | |
| Voltage on MCLR with respect to VSS | -0.3 | 9 | V | 365 | |||
| Storage Temperature | -65 | 150 | °C | 365 | |||
| Ambient Temperature under Bias | -40 | 125 | °C | 365 | |||
| Max Output Current Sunk by Any I/O Pin | 25 | mA | 365 |
CAD (KiCad official)
- Symbol:
PIC16LF1933T-I - Footprint:
Package_DFN_QFN:QFN-28-1EP_6x6mm_P0.65mm_EP4.8x4.8mm - 3D model: QFN-28-EP(6x6) (KiCad packages3D, STEP)
- 3D model files:
pic16lf1933t-i-etched.step/pic16lf1933t-i-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic16lf1933t-i.step/pic16lf1933t-i.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (464 pp, sha256
81839274508365b1, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).