Generated by kicad-footprint-generator · KiCad file format 20260206
PIC16LF18455-I
Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · SSOP-28-208mil
PIC16LF18455-I from Microchip Tech, in a SSOP-28-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RE3/MCLR/VPP | input | Input-only PORTE bit 3, available as a port pin only when MCLRE = 0; when MCLRE = 1 it is the active-low MCLR Reset input (with an internal weak pull-up) and the VPP programming voltage input. |
| 2 | RA0 | bidirectional | PORTA bit 0 with programmable weak pull-up, slew-rate control and interrupt-on-change; also analog input ANA0, comparator inputs C1IN0-/C2IN0-, and CLCIN0 (PPS-selectable). |
| 3 | RA1 | bidirectional | PORTA bit 1 with programmable weak pull-up, slew-rate control and interrupt-on-change; also analog input ANA1, comparator inputs C1IN1-/C2IN1-, and CLCIN1 (PPS-selectable). |
| 4 | RA2 | bidirectional | PORTA bit 2 with programmable weak pull-up, slew-rate control and interrupt-on-change; also analog input ANA2, ADCVREF-, comparator inputs C1IN0+/C2IN0+, and DAC1VREF-/DAC1OUT1. |
| 5 | RA3 | bidirectional | PORTA bit 3 with programmable weak pull-up, slew-rate control and interrupt-on-change; also analog input ANA3, ADCVREF+, comparator input C1IN1+, DAC1VREF+, and MDCARL. |
| 6 | RA4 | bidirectional | PORTA bit 4 with programmable weak pull-up, slew-rate control and interrupt-on-change; also analog input ANA4, MDCARH, T0CKI, and CCP5IN. |
| 7 | RA5 | bidirectional | PORTA bit 5 with programmable weak pull-up, slew-rate control and interrupt-on-change; also analog input ANA5, MDSRC, and SS1. |
| 8 | VSS | power_in | Ground reference for the device logic and I/O pins. |
| 9 | RA7/OSC1/CLKIN | bidirectional | PORTA bit 7 with programmable weak pull-up and interrupt-on-change; also analog input ANA7 and the OSC1/CLKIN external oscillator input. |
| 10 | RA6/OSC2/CLKOUT | bidirectional | PORTA bit 6 with programmable weak pull-up and interrupt-on-change; also analog input ANA6 and the OSC2/CLKOUT oscillator output (OSC2 in crystal modes, CLKOUT or I/O in EC mode). |
| 11 | RC0/SOSCO | bidirectional | PORTC bit 0 with programmable weak pull-up, slew-rate control and interrupt-on-change; also analog input ANC0, Timer1/Timer3 clock and gate inputs (T1CKI, T3CKI, T3G), SMT1WIN, and SOSCO secondary oscillator output. |
| 12 | RC1/SOSCI | bidirectional | PORTC bit 1 with programmable weak pull-up and interrupt-on-change; also analog input ANC1, SMT1SIG, CCP2IN, and SOSCI secondary oscillator input. |
| 13 | RC2 | bidirectional | PORTC bit 2 with programmable weak pull-up and interrupt-on-change; also analog input ANC2, T5CKI, and CCP1IN. |
| 14 | RC3 | bidirectional | PORTC bit 3 with programmable weak pull-up and interrupt-on-change; also analog input ANC3, T2IN, and SCK1/SCL1 (I2C levels on this pin per Table 3 note 4). |
| 15 | RC4 | bidirectional | PORTC bit 4 with programmable weak pull-up and interrupt-on-change; also analog input ANC4 and SDI1/SDA1. |
| 16 | RC5 | bidirectional | PORTC bit 5 with programmable weak pull-up and interrupt-on-change; also analog input ANC5 and Timer4 input T4IN. |
| 17 | RC6 | bidirectional | PORTC bit 6 with programmable weak pull-up and interrupt-on-change; also analog input ANC6 and EUSART1 clock CK1/TX1. |
| 18 | RC7 | bidirectional | PORTC bit 7 with programmable weak pull-up and interrupt-on-change; also analog input ANC7 and EUSART1 RX1/DT1. |
| 19 | VSS | power_in | Ground reference for the device logic and I/O pins. |
| 20 | VDD | power_in | Positive supply pin for the device logic and I/O pins; all VDD and VSS pins must be connected with decoupling capacitors per the datasheet guidelines. |
| 21 | RB0 | bidirectional | PORTB bit 0 with programmable weak pull-up, slew-rate control and interrupt-on-change; also analog input ANB0, comparator input C2IN1+, CCP4IN, CWG1IN, ZCD1, and external interrupt INT. |
| 22 | RB1 | bidirectional | PORTB bit 1 with programmable weak pull-up and interrupt-on-change; also analog input ANB1, comparator inputs C1IN3-/C2IN3-, CWG2IN, and SCK1/SCL1 (I2C levels on this pin per Table 3 note 4). |
| 23 | RB2 | bidirectional | PORTB bit 2 with programmable weak pull-up and interrupt-on-change; also analog input ANB2, CWG3IN, SDI1/SDA1, and SS1. |
| 24 | RB3 | bidirectional | PORTB bit 3 with programmable weak pull-up and interrupt-on-change; also analog input ANB3 and comparator inputs C1IN2-/C2IN2-. |
| 25 | RB4 | bidirectional | PORTB bit 4 with programmable weak pull-up and interrupt-on-change; also analog input ANB4, ADACT, T5G, and SMT2WIN. |
| 26 | RB5 | bidirectional | PORTB bit 5 with programmable weak pull-up and interrupt-on-change; also analog input ANB5, T1G, SMT2SIG, and CCP3IN. |
| 27 | RB6/ICSPCLK | bidirectional | PORTB bit 6 with programmable weak pull-up and interrupt-on-change; also analog input ANB6, SDI2/SDA2, SS2, CK2/TX2, CLCIN2, and the ICSPCLK in-circuit programming/debug clock. |
| 28 | RB7/ICSPDAT | bidirectional | PORTB bit 7 with programmable weak pull-up and interrupt-on-change; also analog input ANB7, DAC1OUT2, T6IN, SCK2/SCL2, RX2/DT2, and the ICSPDAT in-circuit programming/debug data pin. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SSOP-28-208mil |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 28 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Ambient temperature under bias | -40 | 125 | °C | 638 | |||
| Storage temperature | -65 | 150 | °C | 638 | |||
| Voltage on VDD pin (PIC16LF18455/56) | VDD | -0.3 | 4 | V | with respect to VSS | 638 | |
| Voltage on MCLR pin | MCLR | -0.3 | 9 | V | with respect to VSS | 638 | |
| Voltage on all other pins | -0.3 | V | with respect to VSS; maximum printed as VDD + 0.3V | 638 | |||
| Maximum current on VSS pin | 250 | mA | -40°C ≤ TA ≤ +85°C | 638 | |||
| Maximum current on VSS pin | 120 | mA | 85°C < TA ≤ +125°C | 638 | |||
| Maximum current on VDD pin | 250 | mA | -40°C ≤ TA ≤ +85°C | 638 | |||
| Maximum current on VDD pin | 85 | mA | 85°C < TA ≤ +125°C | 638 | |||
| Maximum current on any standard I/O pin | -50 | 50 | mA | 638 | |||
| Clamp current IK | IK | -20 | 20 | mA | VPIN < 0 or VPIN > VDD | 638 | |
| Total power dissipation | 800 | mW | 638 | ||||
| Operating supply voltage VDDMIN | VDD | 1.8 | V | FOSC ≤ 16 MHz | 639 | ||
| Operating supply voltage VDDMIN | VDD | 2.5 | V | FOSC ≤ 32 MHz | 639 | ||
| Operating supply voltage VDDMAX | VDD | 3.6 | V | 639 | |||
| Operating ambient temperature TA_MIN | TA_MIN | -40 | °C | Industrial temperature | 639 | ||
| Operating ambient temperature TA_MAX | TA_MAX | 85 | °C | Industrial temperature | 639 | ||
| RAM data retention voltage | VDR | 1.5 | V | Device in Sleep mode | 640 | ||
| VDD rise rate to ensure internal Power-on Reset signal | SVDD | 0.05 | V/ms | BOR or LPBOR disabled | 641 | ||
| Supply current, XT = 4 MHz | IDDXT4 | 460 | 675 | μA | XT = 4 MHz, 3.0V | 642 | |
| Supply current, HFINTOSC = 16 MHz | IDDHFO16 | 2.1 | 2.6 | mA | HFINTOSC = 16 MHz, 3.0V | 642 | |
| Supply current, HFINTOSC = 32 MHz with PLL | IDDHFOPLL | 3.9 | 4.8 | mA | HFINTOSC = 32 MHz, 3.0V | 643 | |
| Supply current, HS + PLL = 32 MHz | IDDHSPLL32 | 3.5 | 4.3 | mA | HS+PLL = 32 MHz, 3.0V | 643 | |
| Supply current, IDLE mode | IDDIDLE | 1.5 | 1.9 | mA | IDLE mode, HFINTOSC = 16 MHz, 3.0V | 643 | |
| Power-down current, IPD base | IPD | 0.08 | 2 | μA | 3.0V; max column at +85°C | 644 | |
| Power-down current, Low-Frequency Internal Oscillator/WDT | IPD_WDT | 0.8 | 2.8 | μA | 3.0V; max column at +85°C | 644 | |
| Power-down current, Secondary Oscillator (SOSC) | IPD_SOSC | 1 | 3.8 | μA | 3.0V; max column at +85°C | 644 | |
| Power-down current, FVR | IPD_FVR | 46 | 76 | μA | 3.0V; max column at +85°C | 644 | |
| Power-down current, Brown-out Reset (BOR) | IPD_BOR | 10 | 15 | μA | 3.0V; max column at +85°C | 644 | |
| Power-down current, Low-Power Brown-out Reset (LPBOR) | IPD_LPBOR | 0.13 | 2.2 | μA | 3.0V; max column at +85°C | 644 | |
| Power-down current, ADC non-converting | IPD_ADCA | 0.08 | 2 | μA | 3.0V, ADC not converting; max column at +85°C | 644 | |
| Power-down current, Comparator | IPD_CMP | 30 | 57 | μA | 3.0V; max column at +85°C | 644 | |
| Input low voltage, I/O port with TTL buffer | VIL | 0.15 | VDD | 1.8V≤VDD≤4.5V | 646 | ||
| Input low voltage, I/O port with Schmitt Trigger buffer | VIL | 0.2 | VDD | 2.0V≤VDD≤5.5V | 646 | ||
| Input low voltage, I/O port with I2C levels | VIL | 0.3 | VDD | 646 | |||
| Input low voltage, I/O port with SMBus levels | VIL | 0.8 | V | 2.7V≤VDD≤5.5V | 646 | ||
| Input low voltage, MCLR | VIL | 0.2 | VDD | 646 | |||
| Input high voltage, I/O port with Schmitt Trigger buffer | VIH | 0.8 | VDD | 2.0V≤VDD≤5.5V | 646 | ||
| Input high voltage, I/O port with I2C levels | VIH | 0.7 | VDD | 646 | |||
| Input high voltage, I/O port with SMBus levels | VIH | 2.1 | V | 2.7V≤VDD≤5.5V | 646 | ||
| Input high voltage, MCLR | VIH | 0.7 | VDD | 646 | |||
| Input leakage current, I/O ports | IIL | -125 | 125 | nA | VSS≤VPIN≤VDD, pin at high-impedance, 85°C | 646 | |
| Input leakage current, MCLR | IIL | -200 | 200 | nA | VSS≤VPIN≤VDD, pin at high-impedance, 85°C | 646 | |
| Weak pull-up current | IPUR | 25 | 120 | 200 | μA | VDD=3.0V, VPIN=VSS | 646 |
| Output low voltage, standard I/O ports | VOL | 0.6 | V | IOL = 6 mA, VDD = 3.3V | 647 | ||
| Output low voltage, high-drive I/O ports | VOL | 0.6 | V | IOL = 10 mA, VDD = 2.3V, HIDCx = 1 | 647 | ||
| Brown-out Reset voltage, BORV=0 | VBOR | 2.55 | 2.7 | 2.85 | V | BORV=0 | 655 |
| Brown-out Reset voltage, BORV=1 (LF devices only) | VBOR | 1.8 | 1.9 | 2.05 | V | BORV=1 (LF devices only) | 655 |
| Low-Power Brown-out Reset voltage | VLPBOR | 1.8 | 1.9 | 2.2 | V | 655 | |
| System clock frequency | FOSC | 32 | MHz | (Note 2, Note 3) | 650 | ||
| HS oscillator clock frequency | FHS | 20 | MHz | Note 4 | 650 | ||
| XT oscillator clock frequency | FXT | 4 | MHz | Note 4 | 650 | ||
| Secondary oscillator clock frequency | FSEC | 32.4 | 32.768 | 33.1 | kHz | Note 4 | 650 |
| PLL input frequency range | FPLLIN | 4 | 16 | MHz | 652 | ||
| PLL output frequency range | FPLLOUT | 16 | 32 | MHz | (Note 1) | 652 | |
| Instruction cycle period | TCY | 125 | ns | 651 | |||
| Thermal resistance junction to ambient, 28-pin SSOP | θJA | 67.1 | °C/W | Operating temperature -40°C ≤ TA ≤ +125°C | 649 | ||
| Thermal resistance junction to case, 28-pin SSOP | θJC | 23.9 | °C/W | Operating temperature -40°C ≤ TA ≤ +125°C | 649 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | PPS | body RxyPPS | 275 |
CAD (KiCad official)
- Symbol:
PIC16LF18455-I - Footprint:
Package_SO:SSOP-28_5.3x10.2mm_P0.65mm - 3D model: SSOP-28-208mil (KiCad packages3D, STEP)
- 3D model files:
pic16lf18455-i-etched.step/pic16lf18455-i-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic16lf18455-i.step/pic16lf18455-i.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (706 pp, sha256
61f73ef2d72788ed, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).