Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

PIC16LF18455-I

Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · SSOP-28-208mil

PIC16LF18455-I from Microchip Tech, in a SSOP-28-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 RE3/MCLR/VPP input Input-only PORTE bit 3, available as a port pin only when MCLRE = 0; when MCLRE = 1 it is the active-low MCLR Reset input (with an internal weak pull-up) and the VPP programming voltage input.
2 RA0 bidirectional PORTA bit 0 with programmable weak pull-up, slew-rate control and interrupt-on-change; also analog input ANA0, comparator inputs C1IN0-/C2IN0-, and CLCIN0 (PPS-selectable).
3 RA1 bidirectional PORTA bit 1 with programmable weak pull-up, slew-rate control and interrupt-on-change; also analog input ANA1, comparator inputs C1IN1-/C2IN1-, and CLCIN1 (PPS-selectable).
4 RA2 bidirectional PORTA bit 2 with programmable weak pull-up, slew-rate control and interrupt-on-change; also analog input ANA2, ADCVREF-, comparator inputs C1IN0+/C2IN0+, and DAC1VREF-/DAC1OUT1.
5 RA3 bidirectional PORTA bit 3 with programmable weak pull-up, slew-rate control and interrupt-on-change; also analog input ANA3, ADCVREF+, comparator input C1IN1+, DAC1VREF+, and MDCARL.
6 RA4 bidirectional PORTA bit 4 with programmable weak pull-up, slew-rate control and interrupt-on-change; also analog input ANA4, MDCARH, T0CKI, and CCP5IN.
7 RA5 bidirectional PORTA bit 5 with programmable weak pull-up, slew-rate control and interrupt-on-change; also analog input ANA5, MDSRC, and SS1.
8 VSS power_in Ground reference for the device logic and I/O pins.
9 RA7/OSC1/CLKIN bidirectional PORTA bit 7 with programmable weak pull-up and interrupt-on-change; also analog input ANA7 and the OSC1/CLKIN external oscillator input.
10 RA6/OSC2/CLKOUT bidirectional PORTA bit 6 with programmable weak pull-up and interrupt-on-change; also analog input ANA6 and the OSC2/CLKOUT oscillator output (OSC2 in crystal modes, CLKOUT or I/O in EC mode).
11 RC0/SOSCO bidirectional PORTC bit 0 with programmable weak pull-up, slew-rate control and interrupt-on-change; also analog input ANC0, Timer1/Timer3 clock and gate inputs (T1CKI, T3CKI, T3G), SMT1WIN, and SOSCO secondary oscillator output.
12 RC1/SOSCI bidirectional PORTC bit 1 with programmable weak pull-up and interrupt-on-change; also analog input ANC1, SMT1SIG, CCP2IN, and SOSCI secondary oscillator input.
13 RC2 bidirectional PORTC bit 2 with programmable weak pull-up and interrupt-on-change; also analog input ANC2, T5CKI, and CCP1IN.
14 RC3 bidirectional PORTC bit 3 with programmable weak pull-up and interrupt-on-change; also analog input ANC3, T2IN, and SCK1/SCL1 (I2C levels on this pin per Table 3 note 4).
15 RC4 bidirectional PORTC bit 4 with programmable weak pull-up and interrupt-on-change; also analog input ANC4 and SDI1/SDA1.
16 RC5 bidirectional PORTC bit 5 with programmable weak pull-up and interrupt-on-change; also analog input ANC5 and Timer4 input T4IN.
17 RC6 bidirectional PORTC bit 6 with programmable weak pull-up and interrupt-on-change; also analog input ANC6 and EUSART1 clock CK1/TX1.
18 RC7 bidirectional PORTC bit 7 with programmable weak pull-up and interrupt-on-change; also analog input ANC7 and EUSART1 RX1/DT1.
19 VSS power_in Ground reference for the device logic and I/O pins.
20 VDD power_in Positive supply pin for the device logic and I/O pins; all VDD and VSS pins must be connected with decoupling capacitors per the datasheet guidelines.
21 RB0 bidirectional PORTB bit 0 with programmable weak pull-up, slew-rate control and interrupt-on-change; also analog input ANB0, comparator input C2IN1+, CCP4IN, CWG1IN, ZCD1, and external interrupt INT.
22 RB1 bidirectional PORTB bit 1 with programmable weak pull-up and interrupt-on-change; also analog input ANB1, comparator inputs C1IN3-/C2IN3-, CWG2IN, and SCK1/SCL1 (I2C levels on this pin per Table 3 note 4).
23 RB2 bidirectional PORTB bit 2 with programmable weak pull-up and interrupt-on-change; also analog input ANB2, CWG3IN, SDI1/SDA1, and SS1.
24 RB3 bidirectional PORTB bit 3 with programmable weak pull-up and interrupt-on-change; also analog input ANB3 and comparator inputs C1IN2-/C2IN2-.
25 RB4 bidirectional PORTB bit 4 with programmable weak pull-up and interrupt-on-change; also analog input ANB4, ADACT, T5G, and SMT2WIN.
26 RB5 bidirectional PORTB bit 5 with programmable weak pull-up and interrupt-on-change; also analog input ANB5, T1G, SMT2SIG, and CCP3IN.
27 RB6/ICSPCLK bidirectional PORTB bit 6 with programmable weak pull-up and interrupt-on-change; also analog input ANB6, SDI2/SDA2, SS2, CK2/TX2, CLCIN2, and the ICSPCLK in-circuit programming/debug clock.
28 RB7/ICSPDAT bidirectional PORTB bit 7 with programmable weak pull-up and interrupt-on-change; also analog input ANB7, DAC1OUT2, T6IN, SCK2/SCL2, RX2/DT2, and the ICSPDAT in-circuit programming/debug data pin.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package SSOP-28-208mil
Category Single Chip Microcomputer/Microcontroller
Pins 28

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Ambient temperature under bias -40 125 °C 638
Storage temperature -65 150 °C 638
Voltage on VDD pin (PIC16LF18455/56) VDD -0.3 4 V with respect to VSS 638
Voltage on MCLR pin MCLR -0.3 9 V with respect to VSS 638
Voltage on all other pins -0.3 V with respect to VSS; maximum printed as VDD + 0.3V 638
Maximum current on VSS pin 250 mA -40°C ≤ TA ≤ +85°C 638
Maximum current on VSS pin 120 mA 85°C < TA ≤ +125°C 638
Maximum current on VDD pin 250 mA -40°C ≤ TA ≤ +85°C 638
Maximum current on VDD pin 85 mA 85°C < TA ≤ +125°C 638
Maximum current on any standard I/O pin -50 50 mA 638
Clamp current IK IK -20 20 mA VPIN < 0 or VPIN > VDD 638
Total power dissipation 800 mW 638
Operating supply voltage VDDMIN VDD 1.8 V FOSC ≤ 16 MHz 639
Operating supply voltage VDDMIN VDD 2.5 V FOSC ≤ 32 MHz 639
Operating supply voltage VDDMAX VDD 3.6 V 639
Operating ambient temperature TA_MIN TA_MIN -40 °C Industrial temperature 639
Operating ambient temperature TA_MAX TA_MAX 85 °C Industrial temperature 639
RAM data retention voltage VDR 1.5 V Device in Sleep mode 640
VDD rise rate to ensure internal Power-on Reset signal SVDD 0.05 V/ms BOR or LPBOR disabled 641
Supply current, XT = 4 MHz IDDXT4 460 675 μA XT = 4 MHz, 3.0V 642
Supply current, HFINTOSC = 16 MHz IDDHFO16 2.1 2.6 mA HFINTOSC = 16 MHz, 3.0V 642
Supply current, HFINTOSC = 32 MHz with PLL IDDHFOPLL 3.9 4.8 mA HFINTOSC = 32 MHz, 3.0V 643
Supply current, HS + PLL = 32 MHz IDDHSPLL32 3.5 4.3 mA HS+PLL = 32 MHz, 3.0V 643
Supply current, IDLE mode IDDIDLE 1.5 1.9 mA IDLE mode, HFINTOSC = 16 MHz, 3.0V 643
Power-down current, IPD base IPD 0.08 2 μA 3.0V; max column at +85°C 644
Power-down current, Low-Frequency Internal Oscillator/WDT IPD_WDT 0.8 2.8 μA 3.0V; max column at +85°C 644
Power-down current, Secondary Oscillator (SOSC) IPD_SOSC 1 3.8 μA 3.0V; max column at +85°C 644
Power-down current, FVR IPD_FVR 46 76 μA 3.0V; max column at +85°C 644
Power-down current, Brown-out Reset (BOR) IPD_BOR 10 15 μA 3.0V; max column at +85°C 644
Power-down current, Low-Power Brown-out Reset (LPBOR) IPD_LPBOR 0.13 2.2 μA 3.0V; max column at +85°C 644
Power-down current, ADC non-converting IPD_ADCA 0.08 2 μA 3.0V, ADC not converting; max column at +85°C 644
Power-down current, Comparator IPD_CMP 30 57 μA 3.0V; max column at +85°C 644
Input low voltage, I/O port with TTL buffer VIL 0.15 VDD 1.8V≤VDD≤4.5V 646
Input low voltage, I/O port with Schmitt Trigger buffer VIL 0.2 VDD 2.0V≤VDD≤5.5V 646
Input low voltage, I/O port with I2C levels VIL 0.3 VDD 646
Input low voltage, I/O port with SMBus levels VIL 0.8 V 2.7V≤VDD≤5.5V 646
Input low voltage, MCLR VIL 0.2 VDD 646
Input high voltage, I/O port with Schmitt Trigger buffer VIH 0.8 VDD 2.0V≤VDD≤5.5V 646
Input high voltage, I/O port with I2C levels VIH 0.7 VDD 646
Input high voltage, I/O port with SMBus levels VIH 2.1 V 2.7V≤VDD≤5.5V 646
Input high voltage, MCLR VIH 0.7 VDD 646
Input leakage current, I/O ports IIL -125 125 nA VSS≤VPIN≤VDD, pin at high-impedance, 85°C 646
Input leakage current, MCLR IIL -200 200 nA VSS≤VPIN≤VDD, pin at high-impedance, 85°C 646
Weak pull-up current IPUR 25 120 200 μA VDD=3.0V, VPIN=VSS 646
Output low voltage, standard I/O ports VOL 0.6 V IOL = 6 mA, VDD = 3.3V 647
Output low voltage, high-drive I/O ports VOL 0.6 V IOL = 10 mA, VDD = 2.3V, HIDCx = 1 647
Brown-out Reset voltage, BORV=0 VBOR 2.55 2.7 2.85 V BORV=0 655
Brown-out Reset voltage, BORV=1 (LF devices only) VBOR 1.8 1.9 2.05 V BORV=1 (LF devices only) 655
Low-Power Brown-out Reset voltage VLPBOR 1.8 1.9 2.2 V 655
System clock frequency FOSC 32 MHz (Note 2, Note 3) 650
HS oscillator clock frequency FHS 20 MHz Note 4 650
XT oscillator clock frequency FXT 4 MHz Note 4 650
Secondary oscillator clock frequency FSEC 32.4 32.768 33.1 kHz Note 4 650
PLL input frequency range FPLLIN 4 16 MHz 652
PLL output frequency range FPLLOUT 16 32 MHz (Note 1) 652
Instruction cycle period TCY 125 ns 651
Thermal resistance junction to ambient, 28-pin SSOP θJA 67.1 °C/W Operating temperature -40°C ≤ TA ≤ +125°C 649
Thermal resistance junction to case, 28-pin SSOP θJC 23.9 °C/W Operating temperature -40°C ≤ TA ≤ +125°C 649

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
housing PPS body RxyPPS 275

CAD (KiCad official)

  • Symbol: PIC16LF18455-I
  • Footprint: Package_SO:SSOP-28_5.3x10.2mm_P0.65mm
  • 3D model: SSOP-28-208mil (KiCad packages3D, STEP)
  • 3D model files: pic16lf18455-i-etched.step / pic16lf18455-i-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pic16lf18455-i.step / pic16lf18455-i.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (706 pp, sha256 61f73ef2d72788ed, retrieved 2026-10-30, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF