main
Ray Publish 0.1.2 8abbd7f

PIC16LF18444-E

Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · UQFN-20(4x4)

PIC16LF18444-E from Microchip Tech, in a UQFN-20(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 MCLR/VPP/RA3 input Input-only PORTA bit 3 with interrupt-on-change and weak pull-up, shared with the active-low master clear (reset) input and the programming-voltage VPP pin.
2 RC5 bidirectional PORTC bit 5 general-purpose I/O with analog input ANC5, interrupt-on-change and weak pull-up, default location of CCP1IN, T4IN and MDCARH.
3 RC4 bidirectional PORTC bit 4 general-purpose I/O with analog input ANC4, interrupt-on-change and weak pull-up.
4 RC3 bidirectional PORTC bit 3 general-purpose I/O with analog input ANC3, comparator inputs C1IN3-/C2IN3-, CCP2IN, CLCIN1, interrupt-on-change and weak pull-up.
5 RC6 bidirectional PORTC bit 6 general-purpose I/O with analog input ANC6, SS1 default input, interrupt-on-change and weak pull-up.
6 RC7 bidirectional PORTC bit 7 general-purpose I/O with analog input ANC7, interrupt-on-change and weak pull-up.
7 RB7 bidirectional PORTB bit 7 general-purpose I/O with analog input ANB7, T6IN, SDI2/SDA2 (MSSP2 not on PIC16(L)F18444), CK1, interrupt-on-change and weak pull-up.
8 RB6 bidirectional PORTB bit 6 general-purpose I/O with analog input ANB6, SCK1/SCL1 default location, interrupt-on-change and weak pull-up.
9 RB5 bidirectional PORTB bit 5 general-purpose I/O with analog input ANB5, CCP3IN, RX1/DT1, CLCIN3, SCK2/SCL2 (MSSP2 not on PIC16(L)F18444), interrupt-on-change and weak pull-up.
10 RB4 bidirectional PORTB bit 4 general-purpose I/O with analog input ANB4, T5G, SDI1/SDA1, CLCIN2, interrupt-on-change and weak pull-up.
11 RC2 bidirectional PORTC bit 2 general-purpose I/O with analog input ANC2, ADACT, comparator inputs C1IN2-/C2IN2-, MDCARL, T5CKI, interrupt-on-change and weak pull-up.
12 RC1 bidirectional PORTC bit 1 general-purpose I/O with analog input ANC1, comparator inputs C1IN1-/C2IN1-, interrupt-on-change and weak pull-up.
13 RC0 bidirectional PORTC bit 0 general-purpose I/O with analog input ANC0, comparator input C2IN0+, T3CKI/T3G, interrupt-on-change and weak pull-up.
14 RA2 bidirectional PORTA bit 2 general-purpose I/O with analog input ANA2, ADCVREF-, DAC1VREF-, T0CKI, CWG1IN/CWG2IN, ZCD1, CLCIN0, INT0, interrupt-on-change and weak pull-up.
15 RA1/ICSPCLK bidirectional PORTA bit 1 general-purpose I/O with analog input ANA1, ADCVREF+, C1IN0-/C2IN0-, DAC1VREF+, MDSRC, SS2, also serves as ICSPCLK/ICDCLK programming and debug clock.
16 RA0/ICSPDAT bidirectional PORTA bit 0 general-purpose I/O with analog input ANA0, comparator input C1IN0+, DAC1OUT1, also serves as ICSPDAT/ICDDAT programming and debug data.
17 VSS power_in Ground reference for the device; the exposed bottom pad is recommended to be connected to VSS.
18 VDD power_in Positive supply, 1.8V to 3.6V for PIC16LF184XX (2.3V to 5.5V for PIC16F184XX).
19 RA5 bidirectional PORTA bit 5 general-purpose I/O with analog input ANA5, T1CKI, T2IN, SMT1SIG, and CLKIN/SOSCI/OSC1 clock input functions, interrupt-on-change and weak pull-up.
20 RA4 bidirectional PORTA bit 4 general-purpose I/O with analog input ANA4, T1G, CCP4IN, SMT1WIN, and CLKOUT/SOSCO/OSC2 clock output functions, interrupt-on-change and weak pull-up.
21 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package UQFN-20(4x4)
Category Single Chip Microcomputer/Microcontroller
Pins 21

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Operating voltage range (PIC16LF184XX, LF variant) 1.8 3.6 V PIC16LF184XX low-voltage variant; from Operating Characteristics bullet 2
Operating speed (clock input) 32 MHz Printed as 'DC - 32 MHz clock input'; lower bound printed as DC, not a numeric value 1
High-precision internal oscillator (HFINTOSC) frequency accuracy -2 2 % At calibration (nominal), software-selectable frequency range up to 32 MHz 4

CAD (KiCad official)

  • Symbol: PIC16LF18444-E
  • Footprint: Package_DFN_QFN:QFN-20-1EP_4x4mm_P0.5mm_EP2.5x2.5mm
  • 3D model: UQFN-20(4x4) (KiCad packages3D, STEP)
  • 3D model files: pic16lf18444-e-gz-etched.step / pic16lf18444-e-gz-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pic16lf18444-e-gz.step / pic16lf18444-e-gz.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (18 pp, sha256 709d6da773a01030, retrieved 2026-11-20)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text+vision), consensus claude-opus-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF