Generated by kicad-footprint-generator · KiCad file format 20260206
PIC16LF18444-E
Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · UQFN-20(4x4)
PIC16LF18444-E from Microchip Tech, in a UQFN-20(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | MCLR/VPP/RA3 | input | Input-only PORTA bit 3 with interrupt-on-change and weak pull-up, shared with the active-low master clear (reset) input and the programming-voltage VPP pin. |
| 2 | RC5 | bidirectional | PORTC bit 5 general-purpose I/O with analog input ANC5, interrupt-on-change and weak pull-up, default location of CCP1IN, T4IN and MDCARH. |
| 3 | RC4 | bidirectional | PORTC bit 4 general-purpose I/O with analog input ANC4, interrupt-on-change and weak pull-up. |
| 4 | RC3 | bidirectional | PORTC bit 3 general-purpose I/O with analog input ANC3, comparator inputs C1IN3-/C2IN3-, CCP2IN, CLCIN1, interrupt-on-change and weak pull-up. |
| 5 | RC6 | bidirectional | PORTC bit 6 general-purpose I/O with analog input ANC6, SS1 default input, interrupt-on-change and weak pull-up. |
| 6 | RC7 | bidirectional | PORTC bit 7 general-purpose I/O with analog input ANC7, interrupt-on-change and weak pull-up. |
| 7 | RB7 | bidirectional | PORTB bit 7 general-purpose I/O with analog input ANB7, T6IN, SDI2/SDA2 (MSSP2 not on PIC16(L)F18444), CK1, interrupt-on-change and weak pull-up. |
| 8 | RB6 | bidirectional | PORTB bit 6 general-purpose I/O with analog input ANB6, SCK1/SCL1 default location, interrupt-on-change and weak pull-up. |
| 9 | RB5 | bidirectional | PORTB bit 5 general-purpose I/O with analog input ANB5, CCP3IN, RX1/DT1, CLCIN3, SCK2/SCL2 (MSSP2 not on PIC16(L)F18444), interrupt-on-change and weak pull-up. |
| 10 | RB4 | bidirectional | PORTB bit 4 general-purpose I/O with analog input ANB4, T5G, SDI1/SDA1, CLCIN2, interrupt-on-change and weak pull-up. |
| 11 | RC2 | bidirectional | PORTC bit 2 general-purpose I/O with analog input ANC2, ADACT, comparator inputs C1IN2-/C2IN2-, MDCARL, T5CKI, interrupt-on-change and weak pull-up. |
| 12 | RC1 | bidirectional | PORTC bit 1 general-purpose I/O with analog input ANC1, comparator inputs C1IN1-/C2IN1-, interrupt-on-change and weak pull-up. |
| 13 | RC0 | bidirectional | PORTC bit 0 general-purpose I/O with analog input ANC0, comparator input C2IN0+, T3CKI/T3G, interrupt-on-change and weak pull-up. |
| 14 | RA2 | bidirectional | PORTA bit 2 general-purpose I/O with analog input ANA2, ADCVREF-, DAC1VREF-, T0CKI, CWG1IN/CWG2IN, ZCD1, CLCIN0, INT0, interrupt-on-change and weak pull-up. |
| 15 | RA1/ICSPCLK | bidirectional | PORTA bit 1 general-purpose I/O with analog input ANA1, ADCVREF+, C1IN0-/C2IN0-, DAC1VREF+, MDSRC, SS2, also serves as ICSPCLK/ICDCLK programming and debug clock. |
| 16 | RA0/ICSPDAT | bidirectional | PORTA bit 0 general-purpose I/O with analog input ANA0, comparator input C1IN0+, DAC1OUT1, also serves as ICSPDAT/ICDDAT programming and debug data. |
| 17 | VSS | power_in | Ground reference for the device; the exposed bottom pad is recommended to be connected to VSS. |
| 18 | VDD | power_in | Positive supply, 1.8V to 3.6V for PIC16LF184XX (2.3V to 5.5V for PIC16F184XX). |
| 19 | RA5 | bidirectional | PORTA bit 5 general-purpose I/O with analog input ANA5, T1CKI, T2IN, SMT1SIG, and CLKIN/SOSCI/OSC1 clock input functions, interrupt-on-change and weak pull-up. |
| 20 | RA4 | bidirectional | PORTA bit 4 general-purpose I/O with analog input ANA4, T1G, CCP4IN, SMT1WIN, and CLKOUT/SOSCO/OSC2 clock output functions, interrupt-on-change and weak pull-up. |
| 21 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | UQFN-20(4x4) |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 21 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating voltage range (PIC16LF184XX, LF variant) | 1.8 | 3.6 | V | PIC16LF184XX low-voltage variant; from Operating Characteristics bullet | 2 | ||
| Operating speed (clock input) | 32 | MHz | Printed as 'DC - 32 MHz clock input'; lower bound printed as DC, not a numeric value | 1 | |||
| High-precision internal oscillator (HFINTOSC) frequency accuracy | -2 | 2 | % | At calibration (nominal), software-selectable frequency range up to 32 MHz | 4 |
CAD (KiCad official)
- Symbol:
PIC16LF18444-E - Footprint:
Package_DFN_QFN:QFN-20-1EP_4x4mm_P0.5mm_EP2.5x2.5mm - 3D model: UQFN-20(4x4) (KiCad packages3D, STEP)
- 3D model files:
pic16lf18444-e-gz-etched.step/pic16lf18444-e-gz-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic16lf18444-e-gz.step/pic16lf18444-e-gz.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (18 pp, sha256
709d6da773a01030, retrieved 2026-11-20) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).